Answer:
the current flowing through the battery is 4 A.
Explanation:
Given;
resistance of the three resistors in parallel, R₁, R₂ and R₃ = 3.0 Ω, 12 Ω, and 4.0 Ω
voltage of the battery, V = 6.0 V
The equivalent resistance is calculated as follows;
[tex]\frac{1}{R_T} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3} \\\\\frac{1}{R_T} = \frac{1}{3} + \frac{1}{12} + \frac{1}{4} \\\\\frac{1}{R_T} = \frac{4 \ + \ 1 \ + \ 3}{12} \\\\\frac{1}{R_T} = \frac{8}{12} \\\\\frac{1}{R_T} = \frac{2}{3} \\\\R_T = \frac{3}{2} \\\\R_T = 1.5 \ ohms[/tex]
The current flowing through the battery is calculated as follows;
[tex]I = \frac{V}{R_T} \\\\I = \frac{6}{1.5} \\\\I = 4 \ A[/tex]
Therefore, the current flowing through the battery is 4 A.
Un avión despega a las 2:00 p.M en un vuelo de 2500 millas. El avión llega a su destino a las 7:30 p.M. Explicar por qué hay el menos dos momentos durante el vuelo en los que la velocidad del avión es de 400 millas por hora.
Answer:
Por lo tanto, cuando la velocidad promedio del avión es mayor que la velocidad de vuelo posible dada, entonces es posible tener dos puntos durante el vuelo cuando la velocidad es la de la velocidad dada
Explanation:
La hora de despegue del avión, t₁ = 2:00 p.m.
La distancia del vuelo que viaja el avión = 2,500 millas
La hora de llegada del avión al destino, t₂ = 7:30 p.m.
El tiempo de vuelo, Δt = t₂ - t₁
Por lo tanto, Δt = 7:30 - 2:00 = 5 horas 30 minutos = 5,5 horas
La velocidad media del avión,[tex]v_{ave}[/tex] = (Distancia total) / (Tiempo total)
= 2,500 millas / (5,5 horas) = 454. millas por hora
La velocidad promedio se puede encontrar también sumando velocidades individuales y dividiendo el resultado por el número de velocidades sumadas en la suma
Por ejemplo, tenemos;
∴ [tex]v_{ave}[/tex] = (v₁ + v₂ + v₃ )/3
Si durante el vuelo horizontal directo, la velocidad máxima, v₃ = 509 millas por hora, y v₁ y v₂ son puntos donde el avión se mueve en ángulo con la horizontal y, por lo tanto, velocidad horizontal reducida, entonces tenemos;
En el camino hacia arriba sobre una nube con velocidad horizontal v₁
454.[tex]\overline{54}[/tex] = (v₁ + 509)/2
2 × 454.[tex]\overline{54}[/tex] - 509 = 400.[tex]\overline{09}[/tex] = v₁
∴ v₁ = 400.[tex]\overline{09}[/tex] mph ≈ 400 mph
De manera similar, en el camino de regreso a la elevación del vuelo, tenemos v₂ = 400.[tex]\overline{09}[/tex] mph ≈ 400 mph
Por lo tanto, cuando la velocidad promedio del avión es mayor que la velocidad de vuelo posible dada, entonces es posible tener dos puntos durante el vuelo cuando la velocidad es la de la velocidad dada.
the distance and direction between starting and ending positions
Answer:
The length traveled by an object moving in any direction or even changing direction is called distance. The location of an object in a frame of reference is called position. For straight line motion, positions can be shown using a number line. The separation between original and final position is called displacement
Explanation:
good luck
A girl who is watching a plane fly tells her friend that the plane isn't moving at all. Describe a frame of reference in which the girl's description would be true.
The girl's reference frame must be moving with the same speed as the plane.
If an observer is stationary and he watches a car moving he can observe that the car has a momentum and is moving with certain speed. But if the observer is in the car or moving with same speed, the car does not appear to move away form the observer. Likewise, two observers moving with different speed will have different observation about the same car.
Similarly, if the girl describes the plane is not moving that means either she is in the plane or moving with the same speed along with the plane.
Learn more about frame of reference:
https://brainly.com/question/20897534
Kara started a new exercise program. Kara’s sister works out with her on a regular basis and even talks to Kara about her progress. In this scenario, what is another name for Kara’s sister?
A.
goal-setter
B.
self-monitor
C.
support system
D.
nutritionist
can u get this right?
Most metallic elements, such as copper
and iron, have high melting points. This
is a useful property because
F. it keeps cars made of metal from
becoming hot on summer days
G. it enables people to use pots and pans
made of metal to cook food
H. it prevents machine parts made of
metal from rusting
J. it makes metals easier to melt so they
can be poured into molds to make
precision tools
Answer:
G. it enables people to use pots and pans made of metal to cook food
Explanation:
Metals are known to be substances with a relative high melting point, which means that it takes a very high temperature to melt them. As used in this question, copper (Cu) and iron (Fe) at metallic elements that have high melting points.
One advantage of this property based on the options provided is that "it enables people to use pots and pans made of metal to cook food". This is because cooking food requires subjecting them to a constant temperature from a heat source e.g cooker or stove.
The material used to hold the food being cooked must possess a very high melting point to withstand the heat, hence, the importance of these metallic substances. Most pots and pans are made of steel, an alloy of iron, hence, they have high melting point.
pls helppp :)List several examples of applied force, normal force, and friction that you’ve observed in your life.
ill mark brainliest if the answer is actually helpful:p
Answer:
an example for applied force is
Explanation:
The applied force is the force applied to the object to either displace it or change its shape.
HOPE THIS HELPS
A student walks 3 km in 30 minutes. What is the student's average speed in km/h?
Answer:
6km/hr
Explanation:
3km = 30mins
x(km) = 1hr
1hr = 60 x 60 = 3600secs
30min = 30 x 60 = 1800secs
3 x 3,600/x X 1,800
x = 10,800/1,800
x = 6km/hr
To solve the problem we must know about speed, distance, and time.
What is the relationship between Speed, distance, and Time?
We know that speed, distance, and time all are in a relationship with each other. this relationship can be given as,
[tex]\rm{Speed = \dfrac{Distance}{Time}[/tex]
Given to us
A student walks 3 km in 30 minutes.
We know distance can be written as the product of speed and time, therefore,
[tex]\rm Distance = \rm speed \times \rm Time[/tex]
Substituting the values we get,
[tex]\rm 3\ km = Speed \times 0.5\ hour[/tex]
[tex]\rm speed = \dfrac{3\ km}{0.5\ hour}[/tex]
speed = 15 km\h
Hence, the speed of the student is 15 km\hour.
Learn more about speed, distance, and time:
https://brainly.com/question/15100898
What is the average?
Answer:
Explanation:you knoe i know
five properties of light
Answer:
Light is electromagnetic radiation that has properties of waves. The electromagnetic spectrum can be divided into several bands based on the wavelength. As we have discussed before, visible light represents a narrow group of wavelengths between about 380 nm and 730 nm.
OR
The primary properties of visible light are intensity, propagation-direction, frequency or wavelength spectrum and polarization, while its speed in a vacuum, 299 792 458 m/s, is one of the fundamental constants of nature.
The vertical columns on the periodic table of elements are called groups.
A True
B. False
Answer:
True
Explanation:
Which term describes a long-term weather pattern?
air mass
climate
humidity
front
Answer:
Explanation:
The answer is Climate
Answer:
climate
Explanation:
Climate is defined as an area's long-term weather patterns. The simplest way to describe climate is to look at average temperature and precipitation over time.
7. A wave was generated by Oscillation and paused at two different times.
Describe differences and similarities in the characteristics of the wave at different times
Answer:
Differences
The position of the particles in the wave are at different positions at the different times The velocity of each particle will posses different magnitudes and directionacceleration of particles will be different as wellsimilarities
wave length and wave speed will remain the same
Explanation:
A wave generated by Oscillation and paused at two different times will maintain certain characteristics at all times while some characteristics will differ along the wave as it it paused
The differences in the characteristics of the wave at different time ( i.e. at paused and unpaused times )
The position of the particles in the wave are at different positions at the different times The velocity of each particle will posses different magnitudes and directionacceleration of particles will be different as wellsimilarities :
wave length and wave speed will remain the same
- 3000 J of work is done on a 2kg object over a distance of 10m. What is the force acting on the object?
A.1500N
B.300N
C.3000N
D.600ON
The diagram shows how Earth is tilted on its axis as it revolves around the Sun. What is the season in the United States when Earth is in position C
Winter
It is winter because the Northern Hemisphere is not facing the sun.
A 50kg block is at rest on the ground.
(a) Draw a diagram of the block and draw in the forces acting on the block (label these forces)
(b) Determine the magnitude and direction of weight of the block and the normal force acting on the block.
Answer:
(b) 490 N downwards
Explanation:
(b) Formula : w= mg
m is the mass of the object
g is a gravitational constant (9.8)
w= mg
= 50×9.8
= 490 N downwards
how does 3rd class lever make our work easier
Answer:
the third class lever makes our work easier as effort is located at the middle, load at first and fore is applied at the buttom. which helps in accelerating work.
hope it is helpful to you
what is the microcoulomb if the coulomb is 1,00
Answer:
Coulomb = 100
Micro coulomb = 100 × 10^-6 = 10^-4 coulomb
Water in a tank which is positioned 5 feet above the ground is _____ potential energy? (answers would be like thermal, electric, mechanical)
Answer:
Mechanical
Explanation:
The tank is at rest. And energy of any substance at rest is known as potential energy.
Now, in forms of energy, potential energy is a type of mechanical energy.
Thus, the correct option is mechanical Energy.
A 0.547 kg pizza is thrown straight up in the air. At a height of 2.30 m above the surface of the earth it has a speed of 5.00 m/s. Calculate the total mechanical energy of the pizza crust.
Answer:
The total mechanical energy of the pizza crust is 19.2 J.
Explanation:
Mechanical energy is that which a body or a system obtains as a result of the speed of its movement or its specific position, and which is capable of producing mechanical work. Then:
Potential energy + kinetic energy = total mechanical energy
Kinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.
Kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed.
Kinetic energy is represented by the following formula:
Ec = ½ *m*v²
Where Ec is kinetic energy, which is measured in Joules (J), m is mass measured in kilograms (kg), and v is velocity measured in meters over seconds (m / s).
In this case:
m=0.547 kgv= 5 m/sReplacing:
Ec = ½ *0.547 kg*(5 m/s)²
and solving you get:
Ec= 6.8375 J
On the other hand, potential energy is the energy that measures the ability of a system to perform work based on its position. In other words, this is the energy that a body has at a certain height above the ground.
Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the force of gravity. Then for an object with mass m, at height h, the expression applied to the gravitational energy of the object is:
Ep = m*g*h
Where Ep is the potential energy in joules (J), m is the mass in kilograms (kg) is h the height in meters (m) and g is the acceleration of fall in m / s² (approximately 9.81 m/s²)
In this case:
m= 0.547 kgg= 9.81 m/s²h= 2.30 mReplacing
Ep= 0.547 kg *9.81 m/s²* 2.30 m
and solving you get:
Ep= 12.342 J
So:
Total mechanical energy= 12.342 J + 6.8375 J
Total mechanical energy= 19.1795 J≅ 19.2 J
The total mechanical energy of the pizza crust is 19.2 J.
describe what happens when light strikes a translucent material, transparent material , opaque material . give one specific example of an object that has each type of surface.
Answer: according to https://www.doe.virginia.gov When light strikes translucent materials, only some of the light passes through them. The light does not pass directly through the materials. ... Opaque objects block light from traveling through them. Most of the light is either reflected by the object or absorbed and converted to thermal energy.
Explanation:
What are the units of radiation?
The radiation dose absorbed by a person is measured using the conventional unit rad or the SI unit gray. The biological risk of exposure to radiation is measured using the conventional unit rem or the SI unit sievert.
I hope this helps!
Please help me with a speech.The topic of my speech is Passion.
Answer:
Explanation:
Passion
For me, standing on the summit of Mt Everest was the result of following a process. The process of mountaineering. I love mountaineering. I am passionate about it. I love the months of planning for an expedition, the months of sweating and training to prepare my body physically. The meticulous preparation of my equipment. Most of all I love the huge mental challenge I have to overcome before each climb to confront my own fear. All these reasons are why I climb, they are why I climbed Mt Everest and that is why I continue to climb.
Passion is an enormously powerful force. It gives us the strength to get through hard times and setbacks. It gives us strength to overcome our fears, to ignore what other people think of us, to be disciplined and make sacrifices in pursuit of our dreams. Passionate people do not want to take shortcuts – they consider that ‘learning the process’ is an important part of the journey.
In mountaineering it’s easy to spot those who are not passionate about the process. They want to stand on top of the mountain but they are not really interested in the process of climbing the mountain. I feel for these people. Success without hard work is a hollow, empty feeling. They never last long in the sport.
Just as in life, successful mountaineers are the ones who are passionate. They are not there just to stand on the summit. Their passion gives them the energy to work the hardest, fight the longest, and in the words of Winston Churchill “never, never. never give-up”.
when he drove home his car broke down it wasnt due to a problem with the wheels it was the?
speed of light in air is 3 x 10 m/s, determine the speed of light in the glass fibre.
As you turn on the stove, you notice that your water changes temperature from 67 degrees F to 93 degrees F. How many degrees of change is that in degrees C?
Answer:
14.44 degrees of C change
Explanation:
67 to 93 F is 26 degrees F change
C = 5/9 F
26 * 5/9 = 14.44 C change
7 sentences
about degradable
Answer:
Many of planet earth's water pollution crises are due to the use of items that are not degradable biologically;Her address to the United Nations said we have to return to the use of degradable materialsThey are currently producing oxo-degradable materialsSweden is the third nation to perfect and implement the total use of bio-degradable plastic bagsPepsi Cola Company was reported to have promised to discontinue the use of bottles that were not degradable biologicallyAdverse weather conditions eventually make every matter degradable. Some just take longer than otherdetergents are degradable.
Cheers
The displacement current density between the plates of a parallel-plate capacitor is uniform and has a magnitude of 19.9 A/m2 as the capacitor is being charged. What is dE/dt, the rate at which the electric field strength is changing between the plates
Answer:
[tex]\dfrac{dE}{dt} \approx 2.261 \overline {36} \times 10^{12} \ V/ms[/tex]
Explanation:
The parameters given in the question are;
The magnitude of the displacement current density between the plates of a parallel-plate capacitor, J = 19.9 A/m²
We have;
[tex]i_d = \epsilon _0 \times \dfrac{d \Phi_E}{dt} =\epsilon _0 \times A \times \dfrac{d E}{dt}[/tex]
Therefore;
[tex]\therefore \dfrac{dE}{dt} =\dfrac{i_d}{\epsilon _0 \cdot A} =\dfrac{J}{\epsilon_0} = \dfrac{19.9}{8.8 \times 10^{-12}} \approx 2.261 \overline {36} \times 10^{12}[/tex]
Therefore;
[tex]\therefore \dfrac{dE}{dt} \approx 2.261 \overline {36} \times 10^{12} \ V/ms[/tex]
A wheel initially rotating at 12 rad/s decelerates uniformly to rest in 0.4 s. If the wheel has a rotational inertia of 0.5 kg.m², what is the magnitude of the torque causing this deceleration? (A) 1.5 N.m (B) 15 N.m (C) 30 Nm (D) 38 Nm
Answer:
(B) 15 N.m
Explanation:
The deceleration of the wheel is first found by using the following formula:
[tex]\alpha = \frac{\omega_f - \omega_i}{t}[/tex]
where,
α = angular acceleration = ?
ωf = final angular speed = 0 rad/s
ωi = initial angular speed = 12 rad/s
t = time = 0.4 s
Therefore,
[tex]\alpha = \frac{0\ rad/s - 12\ rad/s}{0.4\ s}\\\\\alpha = -30\ rad/s^2[/tex]
here, the negative sign shows deceleration.
Now, we find the torque responsible for this deceleration:
[tex]\tau = I\alpha[/tex]
where,
τ = torque = ?
I = rotational inertia = 0.5 kg.m²
Therefore,
[tex]\tau = (0.5\ kg.m^2)(30\ rad/s^2)\\[/tex]
τ = 15 N.m
Therefore, the correct answer is:
(B) 15 N.m
What is the unit for efficiency?
What is the biggest number the
efficiency can be?
How do you work out the % efficiency?
Answer:
Efficiency has no physical units (example .85 = 85%)
The largest number would be 1 or 100%
An example of efficiency is: work out/work in
or (work in - work lost to friction) / work in would be an example of the efficiency of the process