Most of the matter making up the earth is composed of
A. gases
B. compounds
C. mixtures
Most of the matter making up earth is composed of compounds. I think
Combustion engines became common in the mid-1800s when people began to use them to power ships, trains, and
machinery in factories. Combustion engines add carbon dioxide to the air, and as a result, carbon dioxide in the
atmosphere increased quickly. How did this change the total amount of energy in the Earth system, and how did this
change happen? How did this affect global average temperature?
I need help please and don’t send the fake link): < just to get points
Answer:
The correct answer is - increased the global average temperature.
Explanation:
Combustion is the process that increases the carbon dioxide in the atmosphere, which results in entering more energy into the Earth system than existed from it. Therefore, the amount of energy increased in the system of the earth or surface of the earth.
The reason behind it is that carbon dioxide trapped and redirects energy back toward the Earth's surface, which is absorbed by Earth's surface and surface increased, and global average temperature increased.
Combustion process increases the global average temperature of the earth by absorbing and emitting the energy revert back to earth.
What is combustion?Combustion is a process exothermic process in which organic molecules burns in the presence of oxygen to produce energy in the form of heat and light and CO₂ gas.
CO₂ gas is a green house gas which traps the energy of the atmosphere and revert back it into the earth surface, due to which temperature of the earth surface and atmosphere increases which results in the elevation of global average temperature.
Hence, combustion increases the global average temperature.
To know more about combustion, visit the below link:
https://brainly.com/question/15246277
How does every single cell in the body get the substances it needs to carry out the chemical reaction that provides it energy?
what happen when a piece of silver metal is added to the copper sulphate solution
Answer:
Explanation:When silver Ag metal is added to copper sulphate CuSO4 solution, no reaction takes place as silver is less reactive than that of copper and cannot displace copper from its solution. Hence, when a piece of silver metal is added to copper sulphate solution there will be no reaction.
Answer:
There will be no reaction
Explanation:
Therefore, when silver Ag metal is added to copper sulphate CuSO4 solution, no reaction takes place as silver is less reactive than that of copper and cannot displace copper from its solution. Hence, when a piece of silver metal is added to copper sulphate solution there will be no reaction.
Nitrous acid is classified as an Arrhenius acid because HNO2 contains
1. OH-ions
2. 02-ions
3. NO2-ions
4. H+ ions
4) H+ions is your answer , good morning , have a great day ahead.
Commercially available concentrated hydrochloric acid is 37.0% w/w HCl. Its density is 1.18g/ml. Calculate the molarity of concentrated HCl?
Answer:
M = 12.0M
Explanation:
Hello there!
In this case, according to the given by-mass percent of HCl, which can be set up in terms of mass of HCl over mass of solution, we can calculate the molarity, by multiplying by the density to get the mL's of solution and further convert to liters. Moreover, the molar mass of HCl (36.46 g/mol) must be also used to calculate the moles, since molar units requires moles of solute and liters of solution as shown below:
[tex]M=\frac{37.0gHCl}{100g\ sln}*\frac{1.18g\ sln}{1mL\ sln}*\frac{1000mL\ sln}{1L \ sln}*\frac{1molHCl}{36.46gHCl}\\\\M= 12.0M[/tex]
Best regards!
1. A mixture of 3 gases (A, B, and C) has a total pressure of 240kPa. If the partial pressure of
Gas A is 107 kPa and the partial pressure of Gas B is 55 kPa, what is the partial pressure of
Gas C?
Answer:
78 kPa
Explanation:
The total pressure is the sum of the partial pressures:
240 = Pa + Pb + Pc
240 = 107 + 55 + Pc
Pc = 78 kPa
Answer:
78 kPa
Explanation:
When sewing, push the needle with a force of 10 N. its spike area is equal to 0.0001 mm2. what is the pressure of the needle in the tissue
Answer:
1×10^5
Explanation:
Pressure = Force/Area
P= 10/0.0001
P= 10000
P=1×10^5
Based on the kinetic theory, which statement is true?
Matter is made up of only charged particles.
The particles of matter are stationary.
The particles of matter have zero kinetic energy.
Matter is composed of very small particles.
Answer:Matter is made up of only charged particles.
Explanation: Took the test
are you chemistry because you just blew up my heart
Answer:
i needed that lol
thank you
Explanation:
The daily change from daylight to darkness is caused by:
Answer:
The daily change from daylight to darkness is caused by:the rotation of the Earth on its axis. If the Earth did not rotate as it does, the day/night cycle would be very different or possibly even nonexistent.
Explanation:
What is the percent by mass concentration of 1000 ml of a solution (d=1.5 g/ml) that contains 50 g of solute in it?
Answer: The percent by mass concentration is 33.3 %
Explanation:
Mass percent is the ratio of mass of solute to the mass of solution in terms of percentage.
mass of solute = 50 g
mass of solution = [tex]{\text {density of solution}}\times {\text {volume of solution}}=1.5g/ml\times 1000ml=1500g[/tex]
Mass percentage = [tex]\frac{50g}{1500g}\times 100\%=33.3\%[/tex]
Thus percent by mass concentration of 1000 ml of a solution (d=1.5 g/ml) that contains 50 g of solute in it is 33.3 %
write 2 typical properties that are only common to transition metals
Answer:
Properties of transition elements
they are all metals and that most of them are hard, strong, and lustrous, have high melting and boiling points, and are good conductors of heat and electricity.
What is the main way energy from the Sun moves around Earth?
O
O A.
From the atmosphere
O
B.
From human energy
O
C.
From the ocean currents
Answer:
All of the energy from the Sun that reaches the Earth arrives as solar radiation, part of a large collection of energy called the electromagnetic radiation spectrum. Solar radiation includes visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays. Radiation is one way to transfer heat.
In an exothermic the change in enthalpy is usually
Positive, because the potential energy of the reactants is higher than the potential energy of the products
Neutral, because the potential energy of the products and reactants cancel each other out.
Negative, because the potential energy of the reactants is higher than the potential energy of the products
Positive, because the potential energy of the reactants is lower than the potential energy of the products
Answer:
Negative, because the potential energy of the reactants is higher than the potential energy of the products
Explanation:
Exothermic reaction is a reaction in which heat is released to surrounding. This is due to the fact that the heat content of the reactant is higher than the heat content of product thus producing a negative enthalpy change (ΔH) i.e
Enthalpy change = Heat of product – Heat of reactant
ΔH = Hp – Hr = negative
Considering the options given in the question above, the correct answer is:
Negative, because the potential energy of the reactants is higher than the potential energy of the products
In a separate location, take notes from the sources you’ve identified. The notes will provide details for your paper. While taking notes, you may want to use these reading strategies. Use these sources if you find them helpful: Using your notes, compare the features of analog and digital signals in the table provided. Include one to three points for each feature and type of signal.
Answer:
Here is every answer for analog and digital (in order)
Analog:
Signal Shape: Smooth and continuousNumerical Values for Signal Measurements: Analog signals represent one continuous variable as the result of another continuous time-based variable. They are capable of outputting continuous information with a theoretically infinite number of possible values.Amount of Data that can be transmitted: analog circuits can conduct only fairly low-speed data communications. The maximum data rate over an analog facility is 33.6K bps when there are analog loops at either end. With 56K bps modems, only one end of the loop can be analog. The other end of the connection has to be digital. Energy requirements: light, sound, temperature, position, and pressurePrivacy and security (ability of the signal to be encoded in a secret code): not encryptedClarity of Signal: noise affects clarity and quality, noise is amplified, amplified noise causes more random information in the signal, signal bandwidth is lowDigital (in order):
Signal shape: stepping, square, and discreteNumerical Values for Signal Measurements: digital communication methods transmit a complete measured value, in other words both a numeric value and a unit of measurement Amount of data that can be transmitted: First of all, it is theoretically possible to transmit digital signals directly. Unfortunately when we use capacitors and inductors (energy storage devices) to match the impedance from the transmitter to the air (low impedance transistor say 5 ohms to 388 ohms (air)) these components introduce a bandwidth limiting match. Since all impulse functions have infinite bandwidth (transmitting a 1 and a zero) the bandwidth of the transceiver must be multi octave in order to have any reasonable efficiency. Systems engineers simplify the problem by introducing direct sequence modulation where a carrier is modulated 0/180 degrees dependent on the data rate.Energy requirements: voltage, accoustic pressure, and magnetization of a magnetic storage mediaPrivacy and security: encryptedClarity of signal: noise is lower in amplitude, electronics can ignore the noise, quality of signal is maintained, signal is highExplanation:
I did mine in bullet points, hopefully this helped!
Analog:
Signal Shape: Smooth and continuous
Numerical Values for Signal Estimations: Analog signals speak to one ceaseless variable as the result of another ceaseless time-based variable.
Amount of Information that can be transmitted: analog circuits can conduct as it were reasonably low-speed information communications.
Energy necessities: light, sound, temperature, position, and pressure Privacy and security : not encrypted
Clarity of Signal: clamor influences clarity and quality, commotion is amplified,
Digital:
Signal shape: stepping, square, and discrete
Numerical Values for Signal Measurements: digital communication methods transmit a complete measured value, in other words both a numeric value and a unit of measurement
Amount of data that can be transmitted: First of all, it is theoretically possible to transmit digital signals directly.
Energy requirements: voltage, accoustic pressure.
Privacy and security: encrypted
Clarity of signal: noise is lower in amplitude, electronics can ignore the noise, quality of signal is maintained, signal is high
Analog and digital is :Analog signal could be a continuous signal which speaks to physical estimations.
Digital signals are discrete time signals created by computerized balance.
Example :Human voice in discuss, analog electronic gadgets. Computers, CDs, DVDs, and other advanced electronic gadgets.
what is the difference between isotopes and allotrope not more than three line
Answer:
An allotrope is one way that atoms can be arranged in a solid. An isotope is one way that protons and neutrons can form the same atomic element.
1. What is the major determining factor in soil formation? Define this factor and explain how it influences soil formation.
PLEASE HELP ME PLEASE
Answer:
Temperature and precipitation
Explanation:
They determine how quickly weathering will be, and what kind of organic material may be available on the inside of the soils.
Temperature and precipitation is the major determining factor in soil formation. They define the type of organic material that can be present inside the soils as well as how rapidly weathering will occur.
What is soil?The bioactive, porous media that has grown in the top layer of the Earth's crust is known as soil. Being a source of water as well as nutrients, a filter for harmful wastes, a site for their breakdown, and a participant inside the cycle of elements such as carbon through the planet's ecosystem, soil constitutes one of the main substrates of life on Earth.
It has changed as a result of weathering processes influenced by geographical, geologic, biological, and climatic factors. A practical understanding of soils including their management has also developed out of need since the development of agriculture with forestry in the eighth millennium BCE. Temperature and precipitation is the major determining factor in soil formation. They define the type of organic material that can be present inside the soils as well as how rapidly weathering will occur.
Therefore, temperature and precipitation is the major determining factor in soil formation.
To know more about soil, here:
https://brainly.com/question/27588666
#SPJ3
Compare and contrast a driver of a car and truck, and list defensive driving no links
Answer:
These defensive driving skills can help you avoid the dangers caused by other ... being aware of the cars around you, checking your mirrors — the list goes on. ... It's not just teen drivers who are at fault: People who have been driving for a while ... car and a slow-moving truck in the same lane, it's a pretty sure bet the driver ...
Explanation:
Pb(NO3)2 (aq) + 2 NaI (aq) --> PbI2 (s) + 2 NaNO3 (aq)
Starting with with 50.0 grams of Pb(NO3)2 and 30.0 grams of NaI:
A. What is the limiting reagent?
B. How many grams of the excess reactant remains?
C. How many grams of each product is formed?
D. If 12 grams of NaNO3 actually formed in the reaction, what is the percent yield of this reaction?
Answer:
Explanation:
Moles of Pb(NO3)2 = mass/molecular mass
= 50.0 grams/(207.20*1 + 14.01*2 + 16*6)
= 50.0 grams/331.22
= 0.15 moles
Moles of NaI
= 30/(22.99+126.9)
= 30/149.89
= 0.2 Moles
A. NaI is less 2x Pb(NO3)2 so NaI is the limiting reagent.
B. The ratio is 1 to 2 so there is 0.15 - 0.2/2 = 0.05 mole
or 16.78 grams of Pb(NO3)2 left.
C. As NaI is limiting, only 0.2 Moles of NaNO3 is formed.
Mass = Moles * Molecular Mass
Molecular Mass of NaNO3 can be calculated as:
Na - 22.99
N - 14.01
O - 3(16) = 48
23+14+48 = 85gram / mole
Thus, Mass = 0.2*85 = 17 gram of NaNO3
Mass is conserved in a chemical reaction.
Mass of PbI2 can be calculated as:
50+30-16.78-17
= 46.3 gram of PbI2
Mass =
12.75
Thus, 12.75g of Sodium Nitrate can be formed
Answer:
Explanation:
Pb(NO3)2 (aq) + 2 NaI (aq) --> PbI2 (s) + 2 NaNO3 (aq)
MM for each compound -
Pb(NO3): 207 + 14x2 + 16x3x2 = 331
PI2: 207 + 127x2 = 461
NaI: 23 + 127 = 150
NaNO3: 23 + 14 + 16x3 = 85
Moles of Pb(NO3)2 = 50/331 = 0.15
Moles of NaI = 30/150 = 0.2
Ratio of moles is 1:2
So NaI is limiting
Limited to 0.2/2 = 0.1 mole of Pb(NO3)2
Excess = 0.15 - 0.1 = 0.05 mole
Mass remains = 0.05x331 = 16.55 grams
Moles of NaNO3 formed = Moles of NaI reacted = 0.2
Mass = 0.2x85 = 17 grams
Moles of PbI2 formed = Moles of Pb(NO3)2 reacted = 0.1
Mass = 0.1x461 = 46.1 grams
If 12 grams of NaNO3 actually formed in the reaction,
percent yield = 12/17x100% = 70.6%
Which two compounds of oxygen are small molecules?
Explain why metals conduct electricity. Refer to structure and bonding in your answer
Answer:
They are electrical conductors because their delocalised electrons carry electrical charge through the metal.
Explanation:
for the second ques
not sure...
What is the pH at the equivalence point in the titration of 10.0 mL of 0.39 M HZ with 0.200 M NaOH? Ka = 2.4 × 10−6 for HZ.
Answer:
pH = 9.37
Explanation:
The reaction of HZ with NaOH occurs as follows:
HZ + NaOH → H₂O + Na⁺ + Z⁻
When the reaction is in the equivalence point, the moles added of HZ = Moles of NaOH.
At equivalence point, you will have in solution just NaZ that is in equilibrium with water as follows:
Z⁻(aq) + H₂O(l) ⇄ OH⁻(aq) + HZ(aq)
Where K of equilibrium is Kw / Ka = 1x10⁻¹⁴ / 2.4x10⁻⁶ = 4.17x10⁻⁹
And K is defined as:
K = 4.17x10⁻⁹ = [OH⁻] [HZ] / [Z⁻]
To solve this question we must find [Z⁻] and as [OH⁻] and [HZ] comes from the same equilibrium, both are equal and we can find [OH⁻] in order to solve pH:
Moles NaOH added = Moles HZ:
0.010L * (0.39mol / L) = 3.9x10⁻³ moles HZ = Moles NaOH added
The volume of 0.200M NaOH must be:
3.9x10⁻³ moles * (1L / 0.200moles) = 0.0195L.
The moles of HZ = Moles Z⁻ after the reaction and the volume is 0.010L + 0.0195L = 0.0295L. Thus, [Z⁻] is:
[Z⁻] = 3.9x10⁻³ moles / 0.0295L
[Z⁻] = 0.132M
Replacing in K expression:
4.17x10⁻⁹ = [OH⁻] [HZ] / [Z⁻]
4.17x10⁻⁹ = [X] [X] / [0.132]
5.51x10⁻¹⁰ = X²
X = 2.35x10⁻⁵M = [OH⁻]
As pOH = -log [OH⁻]
pOH = 4.63
And pH is
pH = 14 -pOH
pH = 9.37DUE TONIGHT!
I need help doing this question and please type an ACTUAL answer. I don’t want none of that “aNsWeR iN FiLe”. Thank you!
Calculate the specific heat (Cp) for indium metal given a 1.0 mole absorbs 53.0 J
while increasing in temperature from 297.5K to 299.5K.
Answer:
27J/Kmol
Explanation:
Heat = number of moles times the Moeller heat capacity chimes the change in temperature.
^ Q = nC△T
^ C = Q/ n△T = +53J / (1mol) (299.5K - 297.5K)
^ = 26.5 (rounded to 27)
On a hot day, a student places a glass of cold lemonade on a table outdoors. After a few minutes, water droplets have formed on the outside of the glass.
Is energy absorbed or released by the cold lemonade? Explain your answer.
Compare average kinetic energy for the air molecules and lemonade molecules when the student first places the lemonade outdoors. Explain your answer.
Explain how and why the water droplets form on the outside of the glass.
Answer:
ye but sdfajkd tryng to play me
Explanation:
Answer:
Vapor is released out of the lemonade because when you place it in a hot it will increase.
Explanation:
I have a question for us gals, is it hard for all of you when you try to get your crushes attention and he/she just keeps ignoring you to the point where you could just give up?
Answer:
Yes it is hard. For some of us. I already gave up, but now hes coming back. Id say sometimes its useless to get his attention if he never even pays attention to you anyways. It sucks because its so hard to get then to notice you for once.
Explanation:
You have 1 1/2 moles of 1 kg bottles of O2. What is the mass of O2 that you have?
A. 9.033x10^23 kg
B. 9.033x10^23 atoms
C. 1.80x10^27 kg
D. 1.806x10^24 moles
It is not B as I have already tried it :(
Answer:
A: 9.033 × 10^(23) kg
Explanation:
According to avogadro's number, we know that;
1 mole = 6.022 × 10^(23) kg
Thus;
1½(1.5) mole of O2 will produce;
(1.5 × 6.022 × 10^(23))/1 = 9.033 × 10^(23) kg
Looking at the options, the correct one is Option A.
9) What is the density of the gold rock with a mass of 386 grams and has a volume of 20 cubic centimeters?
O 0.193 g/cc
O 193 g/cc
O 1.93 g/cc
19.3 g/cc
Answer:
density= mass/volume
hence density of gold rock
= 386/20
=19.3 g/cc
What type of reaction is illustrated?
2S03 —> 2S02 + O2
Answer:
synthesis reaction
Explanation:
synthesis reaction where reactants unite to form a single product.
what are the chemical symbols of the particles found in the calcium chloride crystal (lattice)
Answer:
Formula and structure: The chemical formula of calcium chloride is CaCl2, and its molar mass is 110.983 g/mol. It is an ionic compound consisting of the calcium cation (Ca2+) and two chlorine anions (Cl-). The bivalent calcium metal forms an ionic bond with two chlorine atoms, as shown below.
Based on the ionic nature of calcium chloride, the chemical symbols of the particles found in the calcium chloride crystal is Ca²⁺ and Cl⁻.
What are ionic compounds?
Ionic compounds are compounds which are composed of ions.
Calcium chloride is an ionic compound composed of the ions, calcium ions and chloride ions.
The chemical formula of calcium chloride is CaCl2, and its molar mass is 110.983 g/mol.
The symbol for calcium ion is Ca²⁺
The symbol for chloride ion is Cl⁻.
Therefore, the chemical symbols of the particles found in the calcium chloride crystal is Ca²⁺ and Cl⁻.
Learn more about ionic compounds at: https://brainly.com/question/11638999
Mr. Whiteman has two stock solutions of sulfuric acid (H2SO4) in the supply closet: 12.1 M and 6.0 M. If he wants to make 10.0 mL of a 1.0 M solution, which stock solution makes more sense to use? Justify with two calculations.
Answer:
12.1-M requires less volume of stock solution.
Explanation:
Hello there!
In this case, according to the foundations of dilution processes, it turns out convenient to remember that the moles of the solute before and after the dilution remains the same; for that reason we use the following equation:
[tex]M_1V_1=M_2V_2[/tex]
Relating the initial and final molarities and volumes. Now, it is seen that V2 is 10.0 mL and M2 is 1.0 M, which means that if we solve for V1 for 12.1 M and 6.0 M, we obtain the following volumes:
[tex]V_1=\frac{M_2V_2}{M_1} \\\\V_1^{12.1M}=\frac{1.0M*10.0 mL}{12.1M}=0.826mL\\\\V_1^{6.0M}=\frac{1.0M*10.0 mL}{6.0M}=1.67mL[/tex]
Therefore, since the 12.1-M solution requires less volume of stock solution, it makes sense to use this one as the initial solution.
Best regards!