Answer:
Volume of metal piece = 0.0069 m³ (Approx.)
Explanation:
Given:
Weight of metal in air = 300 N
Weight of metal in water = 232.5 N
Find:
Volume of metal piece
Specific gravity of metal
Computation:
We know that;
Density of water = 1,000 kg/m³
Buoyant force applied on metal piece = Weight of metal in air - Weight of metal in water
Buoyant force applied on metal piece = 300 N - 232.5 N
Buoyant force applied on metal piece = 67.5 N
Buoyant force = Volume of metal x Density of water x Gravitational force
67.5 = Volume of metal x 1,000 x 9.8
Volume of metal piece = 0.0069 m³ (Approx.)
A wheelbarrow full of bricks is lifted to the top of a wall. If the mass of the loaded wheelbarrow is 3000.0 g and the height of the wall is 0.45 meters, what is its GPE?
Answer:
the Gravitational potential energy is 13.23 J
Explanation:
The computation of the GPE is shown below:
GPE stands for Gravitational potential energy
The following formula should be used for the same
= mass × gravity × height
= 3000 g × 9.8m/sec^2 × 0.45 m
= 13.23 J
Hence, the Gravitational potential energy is 13.23 J
We simply applied the above formula so that we can easily determine the GPE
A 1,571 kilogram car travelling at 129 kilometers per hour is driving down a highway. The driver suddenly realizes a large animal is standing stationary on the highway in the way of the car. The driver manages to release their foot off the accelerator peddle, but does not have time to hit the brake peddle. The car strikes the animal which gets stuck to the car hood. Immediately after the collision the car slows to 59 kilometers per hour. Given this information, accident investigators are able to determine the mass of the animal as what
Answer:
[tex]1863.9\ \text{kg}[/tex]
Explanation:
[tex]m_1[/tex] = Mass of car = 1571 kg
[tex]u_1[/tex] = Initial velocity of car = 129 km/h
[tex]u_2[/tex] = Initial velocity of the animal = 0
[tex]v[/tex] = Velocity of combined mass = 59 km/h
[tex]m_2[/tex] = Mass of the animal
As the momentum of the system is conserved we have
[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow \dfrac{m_1u_1+m_2u_2}{v}-m_1=m_2\\\Rightarrow m_2=\dfrac{1571\times 129+0}{59}-1571\\\Rightarrow m_2=1863.9\ \text{kg}[/tex]
The mass of the animal is [tex]1863.9\ \text{kg}[/tex].
What do the different colors of stars tell us?
A. The size of the stars
B. The shape of the stars
C. The temperatures of the stars
Answer:
It would Be C The temperatures of the stars
Explanation:
explain melting and freezing using the kinetic theory of matter
As a liquid is cooled its molecules lose kinetic energy and their motion slows. When they've slowed to where intermolecular attractive forces exceed the collisional forces from random motion, then a phase transition from liquid to solid state takes place and the material freezes
Hope it helps u
FOLLOW MY ACCOUNT PLS PLS
what happens to the work done when a force is doubled and the distance moved remain the same?
Answer:
It is doubled
Explanation:
f2=2f1
x1=x2=x
W1=f1*x1=f1*x
W2=f2*x2=f2*x=2*(fi*x)=2*W1
A 45.0-kg girl is standing on a 168-kg plank. The plank, originally at rest, is free to slide on a frozen lake, which is a flat, frictionless surface. The girl begins to walk along the plank at a constant velocity of 1.55 m/s to the right relative to the plank.
Required:
What is the velocity of the plank relative to the surface of the ice?
Answer:
The speed of the plank relative to the ice is:
[tex]v_{p}=-0.33\: m/s[/tex]
Explanation:
Here we can use momentum conservation. Do not forget it is relative to the ice.
[tex]m_{g}v_{g}+m_{p}v_{p}=0[/tex] (1)
Where:
m(g) is the mass of the girlm(p) is the mass of the plankv(g) is the speed of the girlv(p) is the speed of the plankNow, as we have relative velocities, we have:
[tex]v_{g/b}=v_{g}-v_{p}=1.55 \: m/s[/tex] (2)
v(g/b) is the speed of the girl relative to the plank
Solving the system of equations (1) and (2)
[tex]45v_{g}+168v_{p}=0[/tex]
[tex]v_{g}-v_{p}=1.55[/tex]
[tex]v_{p}=-0.33\: m/s[/tex]
I hope it helps you!
what is 60mph (miles per hour) in meters per second? ( A mile is 5280ft)
please someone help me
Answer:
60mph=26.8224meters per second
Explanation:
Waldo needs to know how much force to apply in order to move a 4000-kg object at 2 m/S2. Which law should he refer to
A.
first law
B.
second law
C.
third law
D.
law of gravity
Answer:
B . Second law
Explanation:
According to second law:
Net Force acting on the body produce acceleration. The magnitude acceleration of the body is directly proportional to net force and inversly proportional to the mass.
Mathematically:
a = [tex]\frac{F}{m}[/tex]
and
F = ma
So according to the given condition Waldo should use Second law.
help plz fast :(((( need helpl
Answer:
True
Explanation:
I’m not 100% sure
what is energy and types of energy
Which of the following is NOT a geological event caused by the movement of tectonic plates?
A) Sand Dunes
B) Mountain forming
C) Earthquakes
D) Volcanoes
An electromagnetic wave of frequency 7.55 x 10^14 Hz propagates in carbon tetrachloride with a speed of 2.05 x 10^8 m/s. What is the wavelength of the wave in carbon tetrachloride?
A. 3.38 x 10^-7 m
B. 3.61 x 10^-7 m
C. 3.97 x 10^-7 m
D. 3.01 x 10^-7 m
E. 2.72 x 10^-7 m
Answer:
2.72*10^-7m
Explanation:
Using the formula
v = fλ
v is the speed
f is the frequency
λ is the wavelength
Substitute for λ
λ = v/f
λ = 2.05 x 10^8/7.55 x 10^14
λ = 2.05/7.55 * 10^{8-14}
λ = 0.272 * 10^-6
λ = 2.72*10^-7m
Hence the wavelength of the wave in carbon tetrachloride is 2.72*10^-7m
Acceleration is rate of change of
A-Position
B-Time
C-Velocity
D-Speed
Which structure is represented by letter C?
Choose 1 answers
A. Cell wall
B. Cell membrane
C. Ribosome
D. Cytosol
Answer: C. Ribosome
Explanation: Ribosome is responsible for protein synthesis. I got it right on khan academy :) hope this helps have a blessed day.
The structure which is represented by the letter C is known as free ribosomes. Thus, the correct option for this question is C.
What are Ribosomes?Ribosomes may be defined as a type of cell organelle which is spherical and glandular in shape. They occur freely in the matrix or remain bound with ER.
The major components of ribosomes may include RNA and protein. Ribosomes were first discovered by Palade in 1953. There are two types of ribosomes, ie. the 70s and 80s.
Ribosomes play an important function in the process of protein synthesis. The structure which is represented by the letter A is known as the cell membrane. The structure which is represented by the letter B is known as Cytosol.
Therefore, the structure which is represented by the letter C is known as free ribosomes. Thus, the correct option for this question is C.
To learn more about Ribosomes, refer to the link:
https://brainly.com/question/8773679
#SPJ2
How do home computer scanners generally use electromagnetic waves?
O A. They change information received from sound waves into electromagnetic waves.
OB. They gather information from reflected and absorbed waves.
O C. They receive microwaves that are emitted by natural objects.
O D. They use X-rays that penetrate most objects. SUBMIT
Answer:
they gather information from reflected and absorbed waves.
Explanation:
What is the approximate size of the Earth's magnetic field? (dont ask me to specify thats what the question is and im as confused as heck too)
Answer:
The Earth's magnetic field intensity is roughly between 25,000 - 65,000 nT (.25 -.65 gauss).
Explanation:
To measure the Earth's magnetism in any place, we must measure the direction and intensity of the field. The Earth's magnetic field is described by seven parameters. These are declination (D), inclination (I), horizontal intensity (H), the north (X), and east (Y) components of the horizontal intensity, vertical intensity (Z), and total intensity (F). The parameters describing the direction of the magnetic field are declination (D) and inclination (I). D and I are measured in units of degrees, positive east for D and positive down for me. The intensity of the total field (F) is described by the horizontal component (H), vertical component (Z), and the north (X) and east (Y) components of the horizontal intensity. These components may be measured in units of gauss but are generally reported in nanoTesla (1nT * 100,000 = 1 gauss). The Earth's magnetic field intensity is roughly between 25,000 - 65,000 nT (.25 - .65 gauss). Magnetic declination is the angle between magnetic north and true north. D is considered positive when the angle measured is east of true north and negative when west. The magnetic inclination is the angle between the horizontal plane and the total field vector, measured positive into Earth. In older literature, the term “magnetic elements” is often referred to as D, I, and H.
PLEASE HELP, PLEASE A CORRECT ANSWER!
Answer: I like your profile picture
Explanation:
LESSION 7:LIGHT UNIT TEST
PHYSICAL SCIENCE B: UNIT 4: LIGHT
17/17 answers u cheaters here you go
Answer:
I cheated on
Spanish
ELA
history
Explanation:
Answer:
thx
Explanation:
1.00 x 100 kg of clear liquid (specific heat
capacity = 5.11 x 102 J/kg•°C) at a temperature
of 15.0°C gains 3.33 x 10 J of heat. What is the
final temperature of the liquid? (Assume the
melting point is less than 15.0°C and the boiling
point is greater than 62.0°C.)
Answer:
No temperature change occurs from heat transfer if ice melts and becomes liquid water (i.e., during a ... to change 1 kg of liquid water at the normal boiling point (100ºC at atmospheric pressure) to steam (water vapor).
The melting point of lead is 327.3o C. Assume the final temperature of the system is T. Then the amount of energy released by the lead as it solidifies is. ΔQ = mleadLlead = 0.09 kg*(2.45*104 J/kg) = 2205 J
Since water is much denser than air, deep-sea divers experience a much higher ambient pressure underwater. Each 10 meters of depth underwater adds another 1 atm to the ambient pressure experienced by the diver. (Note: this is in addition to the 1 atm ambient pressure at the surface of the water!) What pressure, in psi, is experienced by a diver 50.0 meters below the surface of the water
Answer:
If you are at sea level, each square inch of your surface is subjected to a force of 14.6 pounds. The pressure increases about one atmosphere for every 10 meters of water depth. At a depth of 5,000 meters the pressure will be approximately 500 atmospheres or 500 times greater than the pressure at sea level.
Explanation:
At sea level, a force of 14.6 pounds is applied to every square inch of your surface. For every 10 meters of sea depth, the pressure rises by approximately one atmosphere. The pressure will be about 500 atmospheres, or 500 times more than the pressure at sea level, at a depth of 5,000 meters.
What is pressure?Pressure is defined as the force applied perpendicularly to an object's surface divided by the surface area over which it is applied.
Pressure is the physical amount of force exerted on a particular area.
Pressure can be expressed as
Pressure = Force / area
There are three types of pressure.
Absolute pressureGauge pressureDifferential pressureThus, at sea level, a force of 14.6 pounds is applied to every square inch of your surface. For every 10 meters of sea depth, the pressure rises by approximately one atmosphere. The pressure will be about 500 atmospheres, or 500 times more than the pressure at sea level, at a depth of 5,000 meters.
To learn more about pressure, refer to the link below:
https://brainly.com/question/15170210
#SPJ2
When carbon bonds with oxygen,
what
gas is formed?
When carbon bonds with oxygen, what gas is formed?
Answer:
Carbon dioxide
Explination:
I remember it from biology.
I hope this helps ^-^
In a chemical reaction, carbon combines with oxygen to form carbon dioxide gas.
What is a chemical reaction?A chemical reaction can be defined as a process that causes the chemical transformation of one chemical substance to another. The chemical reactions accompany chemical changes that involve the rearrangement of electrons in the forming and breaking of bonds between atoms, with no change to the nuclei.
The substances which are primarily involved in a reaction are known as reactants or reagents. Chemical reactions are commonly characterized by a chemical change, and yield products, which exhibit properties different from the reactants.
Chemical reactions take place at a characteristic rate of reaction at a given temperature, pressure, and chemical concentration. The rates increase with the increasing temperature of the reaction when more thermal energy is available to achieve the activation energy for breaking bonds between atoms.
The combustion reaction takes place when carbon combines with oxygen to produce carbon dioxide gas.
Learn more about Chemical reactions, here:
https://brainly.com/question/22817140
#SPJ2
The scanning process and magnetic lenses used in a scanning electron microscope often results in fair to poor resolution and "fuzzy" images.
(A)True
(B)False
Answer:
(B)False is the answer.
Explanation:
A negatively charged rod briefly touches a neutral metal ball. The metal ball will now be ____________
Answer:
let say it will be positive
Two long current-carrying wires run parallel to each other and are separated by a distance of 5.00 cm. If the current in one wire is 1.65 A and the current in the other wire is 3.25 A running in the opposite direction, determine the magnitude and direction of the force per unit length the wires exert on each other.
Answer:
The magnitude of the force per unit length is 2.145 x 10⁻⁵ N/m and the direction of the force is outward or repulsive since the current in the two parallel wires are flowing in opposite direction.
Explanation:
Given;
distance between the parallel wires, r = 5.0 cm = 0.05 m
current in the first wire, I₁ = 1.65 A
current in the second wire, I₂ = 3.25 A
The magnitude of the force per unit length between the two wires is calculated as follows;
[tex]\frac{F}{l} =\frac{\mu_0 I_1 I_2}{2\pi r} \\\\\frac{F}{l} =\frac{4\pi \times 10^{-7} \times 1.65 \times 3.25}{2\pi \times 0.05} \\\\\frac{F}{l} = 2.145 \times 10^{-5} \ N/m[/tex]
Therefore, the magnitude of the force per unit length is 2.145 x 10⁻⁵ N/m and the direction of the force is outward or repulsive since the current in the two parallel wires are flowing in opposite direction.
A star that is one of the coolest,
about 3,200°C, is going to be which
of the following colors?
Resourcos
A. greenish
Help
B. bluish
C. yellowish
D. reddish
You are designing a solenoid to produce a 2.0-kG magnetic field. You wish to wrap your insulated wire uniformly around a cardboard tube that is 8.0 cm in diameter and 58 cm in length, and you have a power supply that will allow you to pass a current of 2.5 A through the solenoid. Determine the total length of wire you will need in order to build the solenoid you have designed.
Answer:
92.7 km
Explanation:
Since the magnetic field due to a solenoid is given by B = μ₀Ni/L where μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, N = number of turns of solenoid, L = length of cardboard tube = 58 cm = 0.58 m, , i = current in wire = 2.5 A and l = length of wire.
So, N = BL/μ₀i
Since B = 2.0 kG = 2.0 × 10³ G = 2.0 × 10³ × 10⁻⁴ T = 2.0 × 10⁻¹ T = 0.2 T
So, substituting the variables into the equation, we have
N = BL/μ₀i
N = 0.2 T × 0.58 m/(4π × 10⁻⁷ H/m × 2.5 A)
N = 1.16 Tm/(31.416 × 10⁻⁷ HA/m)
N = 0.0369 × 10⁷ turns
N = 0.0369 × 10⁷ turns
N = 3.69 × 10⁵ turns
length of wire l = NC where N = number of turns and C = circumference of tube = πD where D = diameter of tube = 8.0 cm = 0.08 m
So, l = NC
= NπD
= πND
= π × 3.69 × 10⁵ turns × 0.08 m
= 0.9274 × 10⁵ m = 9.274 × 10⁴ m
= 92.74 × 10³ m
= 92.74 km
≅ 92.7 km
The total legnth of the wire to built a solenoid will be 92.7 km
What is solenoid?A solenoid is a electromagnet in which the wires are wounded on the outer surface of the soft iron and then the current is passed so due to flow of the current the magnetic field generated around the wire.
Since the magnetic field due to a solenoid is given by
B = μ₀Ni/L
where
μ₀ = permeability of free space = 4π × 10⁻⁷ H/m,
N = number of turns of solenoid,
L = length of cardboard tube = 58 cm = 0.58 m, ,
i = current in wire = 2.5 A and
l = length of wire.
Since B = 2.0 kG = 2.0 × 10³ G = 2.0 × 10³ × 10⁻⁴ T = 2.0 × 10⁻¹ T = 0.2 T
So, substituting the variables into the equation, we have
[tex]N=\dfrac{BL}{\mu_oI}[/tex]
[tex]N=\dfrac{0.2\times 0.58}{4\pi\times 10^{-7} \times 2.5}[/tex]
[tex]N=\dfrac{1.16}{31.416\times 10^{-7}}[/tex]
N = 0.0369 × 10⁷ turns
N = 0.0369 × 10⁷ turns
N = 3.69 × 10⁵ turns
length of wire l = NC where N = number of turns and C = circumference of tube = πD where D = diameter of tube = 8.0 cm = 0.08 m
So, l = NC
= NπD
= πND
= π × 3.69 × 10⁵ turns × 0.08 m
= 0.9274 × 10⁵ m = 9.274 × 10⁴ m
= 92.74 × 10³ m
= 92.74 km
≅ 92.7 km
Hence the total legnth of the wire to built a solenoid will be 92.7 km
To know more about solenoid follow
https://brainly.com/question/26137834
528 nm light passes through a single slit. the second (m=2) diffraction minimum occurs at an angle of 3.48 degrees. what is the width of the slit
Answer:
1.74
Explanation:
right on acellus
Answer:
1.74
Explanation:
acellus
The vector matrix [6 -2] is rotated at different angles. Match the angles of rotation with the vector matrices they produce.
Answer:
Hello your question is incomplete hence I will give you a general answer as regards rotation of vector matrix assuming angle of rotation = [tex]\frac{\pi }{4}[/tex]
answer :
angle of rotation = [tex]\frac{\pi }{4}[/tex]
vector matrix produced = attached below
Explanation:
lets assume the vector matrix [ 6, -2 ] is rotated clockwise by an angle of [tex]\frac{\pi }{4}[/tex]
The resultant matrix = attached below
Result of the rotation = attached below
attached below is the detailed solution
Answer: I got it right on Edmentum
Explanation: Answers attached below
180 N
40 kg
140 N
Net Force =
Also how do you find the net force?
Answer:
720N
Explanation:
180+(40×10)+140=720 remember we can only add with same units ;1kg=10N therefore 40 kg=(40×10)N=400N
The net force would be the summation of all the forces in addition to the weight force of the 40 kg weight, thus the net force of all the forces would come out to be 712.4 Newtons.
What is Newton's second law?Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum.
F = ma
As given in the problem we have to find the net force,
Let us assume the acceleration due to gravity would be 9.81 m/s².
The force generated by the 40-kilogram weight =40 ×9.81 Newtons.
The force generated by the 40-kilogram weight = 392.4 Newtons
Net force = 180 + 140 +392.4
=712.4 Newtons
Thus, the net force of all the forces would come out to be 712.4 Newtons.
Learn more about Newton's second law from here,
brainly.com/question/13447525
#SPJ2
Which of the following is an example of charging by friction?
Answer: where is the examples?
Explanation: