Answer:
1. 7 periods
2. 18 groups
3.Magnessium
4.Fluorine
5.Nickel
6.Radon
7.Francium
8.Lead
Explanation:
what is the ionic equation for dilute hydrochloric acid and magnesium
Answer:
Mg(s) + 2H⁺(aq) ⟶ Mg²⁺(aq) + H₂(g)
Explanation:
A net ionic equation shows all the ionic substances as ions and shows the correct state of each substance.
Magnesium react with hydrochloric acid according to the equation :
Mg(s)+2HCL(aq)----->MgCL2(aq) +H2(g)
This demonstration can be used to illustrate the characteristics reactions of metals with acid , a single replacement reaction ,or to demonstrate the generation of hydrogen gas.
what is my name?
chetana
ikshya
grishma
bhumika
puja
they're name of bunch of girls.
A study was conducted to see if increasing the substrate concentration has an appreciable effect on the velocity of a chemical reaction. With a substrate concentration of 1.5 moles per liter, the reaction was run 15 times, with an average velocity of 7.5 micromoles per 30 minutes and a standard deviation of 1.5. With a substrate concentration of 2.0 moles per liter, 12 runs were made, yielding an average velocity of 8.8 micromoles per 30 minutes and a sample standard deviation of 1.2. Is there any reason to believe that this increase in substrate concentration causes an increase in the mean velocity of the reaction of more than 0.5 micromole per 30 minutes
Answer:
There is not enough evidence
Explanation:
For 1.5 moles substrate concentration per liter
Reaction ( n2 ) = 15 runs
average velocity ( x2 ) = 7.5 micromoles per 30 minutes
standard deviation ( s2 ) = 1.5
For 2.0 moles substrate concentration per liter
Reaction( n1 ) = 12 runs
average velocity ( x1 ) = 8.8 micromoles per 30 minutes
standard deviation ( s1 ) = 1.2
Show Reason to believe that this increase in substrate conc causes an increase in mean velocity
Hypothesis test
H0 : μ1 - μ2 = 0.5
H1 : μ1 - μ2 > 0.5
level of significance ( ∝ ) = 0.01
attached below is a detailed solution to the problem
P-value ( 0.073 ) > level of significance ( 0.01 ) hence we fail to reject the null hypothesis
hence there in not enough evidence to believe that this increase causes an increase in the mean velocity of the reaction of more than 0.5 micromole per 30 minutes
HELP PLEASE ASAP!!!!!
the cell is undergoing a step of meiosis I. what step is the cell in?
a. the beginning of prophase I
b. the middle of metaphase I
c. the end of anaphase I
d. the middle of telophase I
Answer:
I think it's c
Explanation:
jenensnsjsjs
Which object is smaller than a cell?
Molecule
Organ
Organism
Tissue
Answer:
Molecule
Explanation:
Levels of organization (atom-molecule-cell-tissue-organ-organ-system-organism)
What causes the release of energy in an exothermic reaction? Bonds breaking Bonds breaking A catalyst A catalyst Bonds being formed Bonds being formed Electrons escaping the bond
Answer:
weak bonds break and strong bonds form
Explanation:
An exothermic reaction is a chemical reaction in which heat energy is evolved during the reaction process.
Bond formation requires energy while bond breakage releases energy. More energy is needed for the formation of weak bonds as compared to strong bonds.
Hence, when weak bonds break, they release more energy than needed to make a corresponding strong bond leading to the release of the remaining energy as heat.
Can someone answer this, NO ROBOTS!!!!
Genetic engineering improved the lives if individuals with insulin because it helps the body use and store sugar, since people with diabetes can't produce insulin.
A gas has a volume of 15.0 ml at 25 degree Celsius. What is the volume of the gas at 50 degree Celsius.
Answer:
30.0ml
Explanation:
Half of fifty is 25 and 25 represents 15.0ml so 15.0ml×2=30.0ml there for 25+25 is 50
What happens when you mix calcium chloride and hydrogen peroxide?
Answer:
Explanation: When chlorine reacts with hydrogen peroxide, hydrogen peroxide falls apart into water and oxygen. Chlorine gas hydrolyses into hypochlorous acid (, which subsequently into hypochlorite ions . The reaction between hydrogen peroxide and hypochlorite takes place very quickly.
I need help asappp I give the best answer Brainliest
Hey there, leairastrong!!
The endocrine system's role is to send out chemical messages so as to regulate bodily activities. It determines how and when you grow, when you hit puberty and how much your body changes, and even what mood you're feeling right now.
I really hope this helps!! :)
TRUE or FALSE: Traits that an organism has can be influenced by factors in the environment.
Answer:
True
Explanation:
Hope this helps
How many moles are in 46.7g of H2O gas?
Which pieces of equipment are
needed to calculate the velocity of a
falling object?
A stopwatch and balance
B speedometer and magnet
C compass and tape measure
D tape measure and stopwatch
Jose was driving to New York City. He traveled 100 miles in the first hour of the trip and 20 miles in the last hour of his trip. Which can we
say about Jose's drive? (speed = distance = time)
A. Jose drove less than 120 miles.
B. Jose drove faster the first hour of his drive.
C. Jose drove slower the first hour of his drive.
D. Jose drove the same speed for the entire drive.
Answer:
b
Explanation:
he drove 5x faster than the time was when he was on the last hour (maybe caught in traffic or wasn't in a rush)
A sample of oxygen gas occupies a volume of 250 mL at .8 atm of pressure. What volume will it occupy at 1.2 atm of pressure?
How do i describe endothermic and exothermic changes in matter?
The plant chemical which absorbs sunlight and helps make cell food is
A.osmosis
B.cellulose
C.vaculoe
D.chlorophyll
Answer:
chlorophyll
Explanation:
The boiling process is considered to be____
your answer is D. physical change, because a new substance is not formed.
The boiling process is considered to be a physical change as no new substance is formed.
What is a physical change?Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
They involve only rearrangement of atoms and are often characterized to be changes which are reversible.
Learn more about physical change,here:
https://brainly.com/question/17931044
#SPJ2
How many grams is 2.393 x 10^24 atoms of CI
70.45 g CI
140.9 ga
140.9 mole CI
70.45 mole CI
How many grams is 2.393 x 10^24 atoms of O
70.45 g O
140.9 g O
63.58 mole O
63.58 g O
Answer: 1. 140.9 g Cl
2. 63.58 g O
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given atoms}}{\text {avogadro's number}}[/tex]
1. [tex]\text{Number of moles of Cl}==\frac{2.393\times 10^{24}}{6.023\times 10^{23}}=3.973moles[/tex]
1 mol of Cl weighs = 35.5 g
Thus 3.973 mol of Cl weighs = [tex]\frac{35.5}{1}\times 3.973=140.9g[/tex]
2. [tex]\text{Number of moles of O}==\frac{2.393\times 10^{24}}{6.023\times 10^{23}}=3.973moles[/tex]
1 mol of O weighs = 16 g
Thus 3.973 mol of O weighs = [tex]\frac{16}{1}\times 3.973=63.58g[/tex]
PLEASE HELP
How does increasing the amount of greenhouse gases affect the earth?
It causes more hurricanes and tornadoes.
It lowers the earth's global temperature.
It causes fewer thunderstorms.
It raises the earth's global temperature.
Mark other guy brainliest
I needed the answer for the test and he is correct
The air we breathe is a(n) _____.
The liquid metal at room temperature (a) Mercury (b) Sodium (c) Magnesium (d) Silver
Answer:
(a) Mercury
Explanation:
Mercury with chemical symbol (Hg) is also regarded as " quicksilver". It is heavy and silvery in nature and belongs to d-block of the periodic table, it is metallic element and it is liquid at standard conditions of (temperature and pressure). It has Boiling point of about 356.7 °C with Atomic number of 80. It can molten above the temperature of ( −38.8 °C)
1. What is a common example of a converging mirror?
2. Where must you (the object) stand in front of a converging mirror if you want to see an upright,
virtual image of yourself? What is the size of the image compared to the object?
3. A converging mirror produces no image when the object is at
4. If the centre of curvature in a converging mirror is at 10cm, the focal point will be at
om
sorry I don't know 4one
i HOPE IT'S HELP
Which one is the right answers?
Please help me and it have a next one I’m going to post it now
potassium solid and aqueous zinc chloride react to produce what?
K (s) + ZnCl (aq) ====》 KCl ( aq) + Zn (s)
Type the correct answer in the box. Express your answer to two significant figures.
A reaction between 1.7 moles of zinc Ipdide and excess sodium carbonate ylelds 12.6 grams of zinc carbonate. This is the equation for the
reaction:
Na2CO3 + Zniz - 2Nal +
ZnCoz.
What is the percent yield of zinc carbonate?
The percent yield of zinc carbonate is
5.91
1X.
Answer: The percent yield of zinc carbonate is 5.91 %
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} ZnCO_3=\frac{12.6 g}{125.4g/mol}=0.100moles[/tex]
[tex]ZnI_2[/tex] is the limiting reagent as it limits the formation of product and [tex]Na_2CO_3[/tex] is the excess reagent.
[tex]Na_2CO_3+ZnI_2\rightarrow 2NaI+ZnCO_3[/tex]
According to stoichiometry :
1 mole of produce = 1 mole of
Thus 1.7 moles of [tex]ZnI_2[/tex] will produce=[tex]\frac{1}{1}\times 1.7=1.7moles[/tex] of [tex]ZnCO_3[/tex]
Theoretical yield of [tex]ZnCO_3=moles\times {\text {Molar mass}}=1.7moles\times 125.4g/mol=213.2g[/tex]
percentage yield = [tex]\frac{\text {Experimental yield}}{\text {Theoretical yield}}\times 100=\frac{12.6g}{213.2g}\times 100=5.91\%[/tex]
Answer:
the other person was right EXCEPT it says in 2 significant numbers so the answer is 5.9
Explanation:
i hope this helps. have a wonderful day :))
Where are the places these minerals are found: Gold, Limestone and kaiolin.
Explanation:
Gold: The Kolar Gold Fields in Kolar used to be one of the major producers of gold in India, before it shut down. Presently the gold mines of Hutti and Raichur produce almost 84 per cent of the country’s gold. The other major centers of gold mining are Dharwad and Chitradurga. The gold mines produce about 3,000 kg’s of gold per annum. The district of Raichur is also famous for its silver deposits.
Limestone: It is another important mineral with an estimated 51,000 million tons. Karnataka has the largest limestone reserve in India. The districts of Gulbarga, Bagalkot, Belgaum, Shimoga and other Uttara Kannada districts are endowed with extensive high grade limestone. The present and consistent production of approximately 14 million tonnes provides for the cement plants in these districts.
China clay (kaolin) consisting dominantly of kaolinite is one of the most sophisticated industrial minerals with a host of applications, viz., in ceramics, refractories, paper coating, filler for rubber, insecticides, cement, paint, textiles, fertilizers and others including abrasives, asbestos products, fibreglass, chemicals, cosmetics, pharmaceuticals, electrical ware, foundry and glass.
The Department of Mining and Geology through their past investigation campaigns in parts of Kerala,identified two major china clay zones viz., the southern china clay zone between Thiruvananthapuram and Kundara (Thiruvananthapuram and Kollam districts) and the northern china clay zone between Kannapuram Madayi -Cheruthazham in Kannur district to Nileswarm - Manjeshwaram in Kasargod district. An estimated reserve of 172 million tonnes (probable reserve of 80 million tonnes and possible reserve of 92 million tonnes) of china clay of sedimentary and residual origin has been arrived at.
Kerala china clay is one of the finest quality clay and is world class. In fact, Kaolin marketed by English Indian Clays Ltd. (EICL), Thiruvananthapuram claims to have similar or even better properties compared to imported clays.
Hope it's help you
Mark me as a brilliant
Complete the sentence:
The north pole of a magnet____ the north pole of another magnet.
-will attract
-may repel, attract, or not affect
-will not affect
-will repel
the north pole of the magnet will repel the north pole of another magnet
10g of marble was added to 15 grams of dilute hydrochloric acid, product formed is calcium chloride, water and carbon dioxide. which of the following is true?
Answer:
Hydrochloric acid is the excess reactant
Explanation:
I got it right lol
The correct answer is Option B.
Hydrochloric acid is the excess reactant.
Explain about exothermic reaction?An exothermic reaction is one in which energy is given off as heat or light. In contrast to an endothermic reaction, which draws energy from its surroundings, an exothermic reaction transfers energy into the environment.Calcite in marble and limestone dissolves when sulfurous, sulfuric, and nitric acids in polluted air and rain react with it. We observe roughened surfaces, the removal of material, and the loss of carved details in exposed areas of buildings and statues.Because of its basic nature, the calcium carbonate in marble neutralizes the hydrochloric acid in the reaction described above. A base is defined as "a compound that reacts with an aqueous solution of an acid to produce a water and salt solution in which the salt gets separated into its component ions." Any extra salt that remains after a given salt solute has saturated the aqueous solution precipitates out of the solution.To learn more about exothermic reaction refer to :
https://brainly.com/question/2924714
#SPJ2