If the needle in the galvanometer is going up, the conclusion about the motion of the magnet is it must be moving right.
What is galvanometer?The galvanometer is the device used to detect the small current when moving coil is deflected.
When the magnet is moved towards or into the coil of wire, the magnetic field will change and voltage will be generated into the coil. The coil must be moving to the right when galvanometer going up.
Thus, the conclusion about the motion of the magnet is, it must be moving to the right.
Learn more about galvanometer.
https://brainly.com/question/17247518
#SPJ2
What electromagnetic waves are used in these applications?
Diagnosing illnesses:
Warming and cooking food:
Transmitting data from remote controls to televisions:
The electromagnetic waves are used in these applications are:
Diagnosing illnesses: X-rays.
Warming and cooking food: infrared waves.
Transmitting data from remote controls to televisions: Radio waves.
What is electromagnetic waves?The oscillations between an electric field and a magnetic field produce waves known as electromagnetic waves, or EM waves. In other words, magnetic and electric fields oscillate to form electromagnetic (EM) waves.
When an electric field interacts with a magnetic field, electromagnetic waves are created. Therefore, they are referred to as "electromagnetic" waves. An electromagnetic wave's electric field and magnetic field are perpendicular to one another (at right angles). Additionally, they are perpendicular to the EM wave's direction. An electromagnetic wave can pass through any medium, including vacuum, solid materials, and air. It can spread or move from one area to another without the use of a medium.
Learn more about electromagnetic wave here:
https://brainly.com/question/3101711
#SPJ5
The displacement current density between the plates of a parallel-plate capacitor is uniform and has a magnitude of 19.9 A/m2 as the capacitor is being charged. What is dE/dt, the rate at which the electric field strength is changing between the plates
Answer:
[tex]\dfrac{dE}{dt} \approx 2.261 \overline {36} \times 10^{12} \ V/ms[/tex]
Explanation:
The parameters given in the question are;
The magnitude of the displacement current density between the plates of a parallel-plate capacitor, J = 19.9 A/m²
We have;
[tex]i_d = \epsilon _0 \times \dfrac{d \Phi_E}{dt} =\epsilon _0 \times A \times \dfrac{d E}{dt}[/tex]
Therefore;
[tex]\therefore \dfrac{dE}{dt} =\dfrac{i_d}{\epsilon _0 \cdot A} =\dfrac{J}{\epsilon_0} = \dfrac{19.9}{8.8 \times 10^{-12}} \approx 2.261 \overline {36} \times 10^{12}[/tex]
Therefore;
[tex]\therefore \dfrac{dE}{dt} \approx 2.261 \overline {36} \times 10^{12} \ V/ms[/tex]
- 3000 J of work is done on a 2kg object over a distance of 10m. What is the force acting on the object?
A.1500N
B.300N
C.3000N
D.600ON
A 110 kg fire-fighter descends down a pole. He experiences 530N of
friction.
d. Determine the fire-fighters weight
e. Draw an FBD
f. Determine the Fnet
A body falling freely on the moon the acceleration due to gravity there is 1.7 m/s2.
a. its displacement at t = 3s
b. the time for it to reach a speed of 25 m/s
c. the time required for it to fall 300 m
d. its speed after falling 70 m
Answer:
a) 7.65 m
b) 14.71s
C) 15.43 m/s
Explanation:
a) s = ut + 0.5at²
s= ?
u = 0
t = 3s
a = 1.7 m/s²
s = 0 + 0.5 × 1.7 × 3²
s = 7.65 m
b) v = u + at
v = 25m/s
u = 0 m/s
a = 1.7 m/s ²
t = ?
v=at
t = v / a
t = 25 / 1.7
t = 14.71s
c) v² = u² + 2as
s = 70m
a = 1.7m/s²
u = 0 m/s
v = ?
v² = 2as
v = √238
v = 15.43 m/s
What is the wavelength of a sound wave that has a speed of 340 m/s and a frequency of 880 Hz?
Answer:
Explanation:Wave length of a sound wave = speed / frequency1) 340 m/s / 880 Hz
Answer:
0.386m
Explanation:
Speed
Wavelength = -----------------
Frequency
340m/s
Wavelength = -------------- = 0.386m
880 Hz
Which layer of the earth is the thickest?
A) Crust
B) Mantle
C) Outer core
D) Inner core
C) OUTER CORE
IT IS THE THICKEST
The increase in resistant strains of insects to chemicals is a result of:
A. natural selection creating new organisms
B. evolution of new species
C. increase in those offspring who inherited resistant traits from their parents
D. all of the above
Answer:
answer D. all of the above
A 4 kg mass is moving at 8 m/s collides with a 2 kg mass moving at 5 m/s.
After the collision, both objects stick together, what is the velocity of the
two cars? *
Answer:
V = 7 m/s
Explanation:
Given that,
Mass 1, m₁ = 4 kg
Speed of the object 1, v₁ = 8 m/s
Mass 2, m₂ = 2 kg
Speed of object 2, v₂ = 5 m/s
After the collision, both objects stick together. Let V be the common velocity. Using the conservation of linear momentum to find it.
[tex]m_1v_1+m_2v_2=(m_1+m_2)V\\\\V=\dfrac{m_1v_1+m_2v_2}{m_1+m_2}\\\\V=\dfrac{4(8)+2(5)}{4+2}\\\\V=7\ m/s[/tex]
So, the velocity of two cars is 7 m/s.
Which best describes the effect of force on the motion of an object
Answer:
change of speed or direction
3. a) Your body is made up of several simple machines that help you move. Identify three
parts of your body that act as simple machines. Identify the kind of machine for each one
and explain what it does.
Answer:
Explained below
Explanation:
1) The human arm: This is a type of simple machine called "Lever". In this type of machine, the elbow acts as the fulcrum, the palm serves as the load because that's where we place the load we want to carry. While the inner part of the arm which is the inner part of the elbow represents the effort because that is the joint we mover when making use of our arms.
2) Pulleys: An example of this in the human body is the knee cap where the direction of an applied force is changed. Thus means as it is in motion, it alters the direction for which the quadriceps tendon pulls on the tibia.
3) wheel and axle: An example of this in the human body is the lateral rotation of the shoulder joint medial. The humerus which is the bone between the shoulder and elbow will act as the axle while the rotator will be the will because when it is rotated a little bit, the humerus will move along with it.
If object A is half the mass of object B, then is it possible for them to have the same momentum
Of course !
Object-A just has to move twice as fast as Object-B.
Roark saw Alejandro sitting by himself in the quad and leaning over, with his head resting on the heels of his hands. Roark approached him and said, "Hey Alejandro, you look sad." Alejandro responded, "Huh? No, I'm just thinking." Which difficulty in interpreting nonverbal behavior does this exchange exemplify?
A. Nonverbal messages are often ambiguous.
B. Nonverbal messages are continuous.
C. Nonverbal cues are multichanneled.
D. Nonverbal interpretation is culture-based.
Answer:
Option A
Explanation:
Nonverbal communications are ambiguous because some times the face expressions (non verbal signals – Sad face or sitting alone gesture of Alejandro) and the verbal signals (communication between Roark and Alejandro) do not match or contradict each other. Some people prefer to believe on their interpretations of the nonverbal signals as compared to that of the verbal signals
Hence, option A is correct.
describe what happens when light strikes a translucent material, transparent material , opaque material . give one specific example of an object that has each type of surface.
Answer: according to https://www.doe.virginia.gov When light strikes translucent materials, only some of the light passes through them. The light does not pass directly through the materials. ... Opaque objects block light from traveling through them. Most of the light is either reflected by the object or absorbed and converted to thermal energy.
Explanation:
How do the gravitational potential energy and the kinetic energy of the ball change as the ball rolls down the ramp?
Explanation:
The gravitational potential energy is given by :
P = mgh
The kinetic energy of an object is given by :
[tex]K=\dfrac{1}{2}mv^2[/tex]
As the ball reaches the bottom of the ramp, its potential energy decreases and kinetic energy increases.
It imply that, when the ball at the top most height, its gravitational potential energy is maximum and zero kinetic energy and when ball reaches the bottom of the ramp, it will have maximum kinetic energy and zero potential energy.
As a projectile travels down its trajectory path, it covers _____.
A. more distance each second
B. a distance that depends on how it was dropped
C. the same amount of distance each second
D. less distance each second
Answer:
it is C.
definitely C
Explanation:
if I am right.
plz help me out and give brainliest
Where electrons are held or stored
Answer:
Held
~Hope it Helps!~
If the radius of an electron's orbit around a nucleus doubles but the wavelength remains unchanged, what happens to the number of electron wavelengths that can fit in the orbit?
Answer:
Number of electron wavelength will Double
Explanation:
let the radius = r and wavelength = λ
when R doubles and λ ( wavelength ) remains the same
The number of electron electron wavelengths will double as well
Using Bohr's angular momentum quantization to show this
attached below
ok this is the one i need help with but no
links bc i know its viruses
Answer:
polar covalent bonding
Explanation:
Water (H2O) is polar because of the bent shape of the molecule. The shape means most of the negative charge from the oxygen on side of the molecule and the positive charge of the hydrogen atoms is on the other side of the molecule. This is an example of polar covalent chemical bonding.
1. A wave on a rope has a wavelength of 2.0m And a frequency of 2.0 Hz. What is the speed of the wave?
Plzzzzzzz help!!!
Answer:
4
Explanation:
2*2
www.omnicalculator.com/physics/wavelength
A mercury in barometer shows a height of 70cm.What height would be shown in the barometer at the same place if water density 1.0×10³kg/m³ is used(denssity of mercury=13600kgm-³)
Answer:
P = d g h pressure due to density of liquid of height h
d1 g h1 = d2 g h2 since P1 equals P2
d1 h1 = d2 h2 and the density of Hg is 13.6 times that of water
h2 = (d1 / d2) * h1 = 13.6 * 70 cm = 952 cm or 9.52 m
helppppppppppppppppppp
Answer:
Explanation:
The answer is 75 cm
A 30.0 kg rock falls from a 35.0 m cliff. What is the kinetic and potential energy when the rock has fallen 12.0 m?
Answer:
When the rock has fallen 12.0 m;
The kinetic energy of the rock is approximately 3,531.6 J
The potential energy of the rock is approximately 6,768.9 J
Explanation:
The question relates to the characteristic constant total mechanical energy of a body
The mass of the rock that falls, m = 30.0 kg
The height of the cliff from which the rock falls, h₁ = 35.0 m
The required information = The kinetic and potential energy when the rock has falling 12.0 m
The kinetic energy is given by the formula, K.E. = 1/2×m×v²
The potential energy is given by the formula, P.E. = m·g·h
Where;
g = The acceleration due to gravity ≈ 9.81 m/s²
The velocity of the rock after falling through a given height, h is given by the formula, v² = 2·g·Δh
The total mechanical energy of the rock, M.E. = K.E. + P.E. = Constant
At the height of the cliff before falling, Δh =0, therefore v₁ = 0, therefore, K.E. = 1/2×m×v₁² = 0 J
The potential energy at the cliff before the rock begins to fall, P.E. is goven as follows;
P.E. = 30.0 kg × 35.0 m × 9.81 m/s² = 10,300.5 J
At the top of the cliff, M.E. = K.E. + P.E. = 0 J+ 10,300.5 J = 10,300.5 J
∴ M.E. = 10,300.5 J
When the rock has fallen, 12.0 m, Δh = 12.0 m, the speed of the rock, v₂, is given as follows;
v₂² = 2 × 9.81 m/s² × 12.0 m = 235.44 m²/s²
v₂ = √(235.44 m²/s²) ≈ 15.344 m/s
∴ When the rock has fallen 12.0 m, K.E., is given as follows;
K.E. = 1/2×m×v₂²
K.E. = 1/2 × 30.0 kg × 235.44 m²/s² = 3,531.6 J
When the rock has fallen 12.0 m the kinetic energy, K.E. = 3,531.6 J
When the rock has fallen 12.0 m, M.E. = P.E. + K.E.
M.E. = Constant = 10,300.5 J
K.E. = 3,531.6 J
∴ 10,300.5 J = P.E. + 3,531.6 J
P.E. = 10,300.5 J - 3,531.6 J = 6,768.9 J
∴ When the rock has fallen 12.0 m, the potential energy, P.E. = 6,768.9 J.
Once a player has stopped dribbling, how many steps are they allowed to take at maximum?
Answer:
2 steps
Explanation:
:)
this makes basketball interesting
Answer:
2 steps tops. If it is more that is called "traveling".
Explanation:
how far will an automobile move if 168000 j of work is created by 2000 n of force
Answer:
Distance = 84 meters
Explanation:
Given the following data;
Work done = 168,000 Joules
Force = 2,000 Newton
To find the distance covered by the automobile, we would use the formula;
[tex] Workdone = force * distance [/tex]
Substituting into the formula, we have;
[tex] 168000 = 2000 * distance [/tex]
[tex] Distance = \frac {168000}{2000} [/tex]
Distance = 84 meters
A construction worker drops a hammer from a 15 m high building. How fast is it going before it hits the ground?
Answer:
12.1 m/s
Explanation:
v^2-u^2=2as
v^2-0=g(15)
What is the name of the process where rocks are being broken down into small grains of sediment or soil?
A) Weathering
B) Erosion
C) Deposition
D) Uplifting
Answer:
a. weathering
Explanation:
weathering is the breakdown of rocks into sediments and soil
What force can be seen when North Pole is brought near to South Pole
Answer:
Explanation:
The answer is magnetic force
Answer:
Magnetic forces which causes attraction between the two poles
a rectangular tank measures 12.5 metres long 10.0 wide and 2.0 metre high calculate the mass of the water in the tank when it is full the density of water 1000 kg per metre cube assume the measurement are internal
Answer:
250000kg
Explanation:
Mass =density * volume
Density=1000kg/m³
Volume=l*w*h
12.5*10.0*2.0=250m³
Mass=1000 *250
=250000kg
1. Explain how applied heat works between and at critical temperatures.
2. Explain how a refrigerator works to cool down warm objects that would otherwise be i
temperature.
3. Fill in the chart below to identify the name of the process that explains the state of cha
indicated, the states of matter being changed, or the points at which the process occu
Answer:
More heat is required for the change of state.
Explanation:
Applied heat works at critical temperatures because at this point more heat is needed by the substance in order to change the state of substance. At critical temperatures, the substance can't melt if no more heat energy is given to the substance. A refrigerator works to cool down warm objects by absorbing heat from the inside portion of the fridge and provides cool air which cools the inner side of the fridge. The point at which a solid changes into a liquid state is called melting point while on the other hand, the point at which a liquid changes into a gaseous state is known as boiling point of a substance.