Answer:
..sure....
Explanation:
Answer:
hmm i dont see it homie sike gimmi that bootiy
What common kitchen appliance uses radiation to heat food ?
Answer:
microwave
Explanation:
Answer:
Toaster ovens & Microwave
Explanation:
5. CaCO, - CaO+CO,
Reaction Type
Answer:
(a) Decomposition: A substance breaks down to smaller species. [e.g. CaCO3(s) → CaO(s) + CO2(g) Decomposition of limestone to calcium oxide (quicklime) and carbon dioxide on heating.]
Brooke decides to model a lunar eclipse. She attaches a large poster of the Sun to her wall to represent the Sun. She then decides that her head will represent Earth, and the direction she is facing will indicate the direction an observer on Earth is facing. She will then hold a small ball in her hand to represent the Moon. In order to model a person watching a lunar eclipse, Brooke faces the "Sun," stretches out her hand, and faces the "Moon" in front of her. What aspect of Brooke's model should be corrected?
A. Brooke should turn so that the Sun is on her right, and hold the Moon to her left.
B. Brooke should turn so that her back is to the Sun, and hold the Moon behind her.
C. Brooke should turn so that the Sun is on her left, and hold the Moon in front of her.
D. Brooke should turn so that her back is to the Sun, and hold the Moon in front of her.
PLEASE HELP ITS A TEST :(((
Answer:
its D
Explanation:
Brooke should turn so that her back is to the Sun to her wall, and hold the Moon (ball representing Moon) in front of her. Therefore, option (D) is correct.
What is a Lunar eclipse?The eclipse of the moon occurs when the earth comes in between the sun and the moon. The earth blocks the light coming from the sun from reaching the surface of the moon and casts its shadow on the moon.
A lunar eclipse occurs on a full moon day and can be observed up to 3 lunar eclipses per year. A lunar eclipse can be categorized depending on how the sun, the moon, and the earth line up.
A partial lunar eclipse is when only a part of the moon moves into the shadow's earth. A total lunar eclipse is when the earth crossed directly in front of the moon and casts its shadow.
If Brooke's head is earth then it will be in the center and her back will be towards to sun poster on the wall. So that the ball in her hand can play as a moon to show the lunar eclipse.
Learn more about the Lunar eclipse, here:
https://brainly.com/question/12075389
#SPJ6
Question
WHMIS legislation states that Material Safety Data Sheets:
A)are expired if they are more than 3 years old
B) must be available for workers to review
C)are expired if they are more than 5 years old
D )both a and be
E) both b and c
Answer: B) must be available for workers to review
Explanation:
WHMIS is a Canadian program which gives information to the employers about the workers knowledge about hazardous materials that are used in the workplace. It is ensured that the worker labelled the hazardous material at the workplace, material safety data sheet should be created to supplement the label, and worker's education program for learning the safety precautions is also conducted.
The material safety data sheets are created by the employers and their is no expiry date for such data for workers instead they receive a next recommended training date for participating in the training and avail another certification after the completion of first year.
HELP ME PLZ IT WILL MEAN A LOT
Answer:
1. B
2.C
Explanation:
I just used logic, it's been a while since I've done this but right now I'm in Honors Chemistry and I think I have the qualifications to answer this question. Sorry if I'm wrong.
Josie draws models of the particles within a substance. Which model best represents the particles in
a solid?
D
A
B
C
help will make brainliest! :)
Answer:
im not sure, but i believe its T. the dew point is 76.
Fun fact! <3
An apple, potato, and onion all taste the same if you eat them with your nose plugged
Answer:
:O Fr? Bet let me go get them lol
✧ Yes, since one of our senses are missing we won't really detect the taste.
Explanation: Think about it, we usually smell food and we can already tell if it's going to taste good or not. Looking or touching food doesn't always help to know if we will like the taste. ✧
what is convection,radiation,conduction?
Answer:
Conduction is the transfer of thermal energy through direct contact. Convection is the transfer of thermal energy through the movement of a liquid or gas. Radiation is the transfer of thermal energy through thermal emission.
Which is the balanced version of the half-reaction below?
Answer:
The answer is B
Explanation:
Because H2S →S + 2HplusWHICH COMPOUND HAS BONDS WITH THE LEAST DEGREE OF POLARITY (LEAST POLAR)?
Explanation:
H−S has least polarity in the bond because the electronegativity difference between H and S is the least.
What are the three properties of waves?
Answer: amplitude, wavelength, and frequency.
Explanation:
In the name carbon dioxide what does the prefix of the second word indicate about a molecule of a dioxide A. It has two carbon atoms B. It has two oxygen atoms C. It is a polyatomic ion D. It Is an ionic bond
Answer:
The answer is option B, that is, it has two oxygen atoms.
What kind of energy can be transferred?
Help quick please.
Answer:
Any kind, as long as there is an action.
Answer:
Energy can be transferred from one form to another like kinetic energy to potential energy, light energy to heat energy, kinetic energy to electrical energy, light energy to chemical energy .etc ...
Explanation:
brainest please
PLEASE HELP! SEE ATTACHED!
Answer:
Ans => C => 43.3%
Explanation:
2CO + O₂ => 2CO₂
Given 1g CO = 1g/28g·mol⁻¹ = 0.036 mol CO
b/c coefficient of CO = coefficient of CO₂ => moles CO₂ = 0.036 mol = 0.036mol x 44g/mol = 1.57 gCO₂ (theoretical yield)
%Yield = (actual yield/theoretical yield) x 100% = (0.68g/1.57g) x 100% = 43.3%
1.
Many plants can reproduce asexually. How is this an advantage for the plant? Why can it sometimes be a disadvantage
for the plant? Use details to support your answer.
Answer:
Advantage and disadvantage of asexual reproduction in plant is described below in details.
Explanation:
An advantage of asexual reproduction is that the resulting plant will approach adulthood quicker. Since the new plant is emerging from a grown-up plant or plant components, it will also be stronger than a seed. Asexual reproduction can take a spot by natural or manufactured (assisted by humans) means.
The significant disadvantages of asexual reproduction are the Shortage of diversity. Following the seeds are genetically the same as the parent they are more sensitive to the same diseases and nutrient insufficiencies as the parent. All the negative deviations endure for generations.
If X is the symbol of an element, which pair correctly represents isotopes of X
Answer:
What pair???
Explanation:
Answer:
C is the pair that represent the isotopes of x
How many grams are in 2.0 moles of iron(III) carbonate?
Explanation:
1 mole is equal to 1 moles Iron(III) or 832.29538 grams, so 2 moles Iron(III) = 1664.59076 grams
Apart from cost, give three reasons why steel should be recycled
Answer:
Well, acutally it shouldnt..but why it should be recycled is because 1. you can use it for many nessactities such as cars and blades, and bikes
You should also recycle it for, scrap parts! so just in case if you need recycled steel ya know where to get it
Lastly, you should recycle steel because of its value. If you recycle steel then melt it, and make well i dont know, a blade out it, you might have just made something, and then think, "Well that was fun and easy, i wanna use more recycled items to build or forge things
Explanation:
Hope this helps and pls mark brainlest!
Answer:
i think because its cause pollution
Explanation:
when making steel a lot of pollution goes in the atmosphere so if you recyle the the steel we may less pollution [ im only 12 so im sorry if this was wrong]
PLEASE HELPPP!!!!!! ASAP!!!!
Which of the following best describes cations? Question 19 options: A) They're negatively charged because they lost an electron. B) They're positively charged because they gained an electron. C) They're positively charged because the number of electrons remained the same. D) They're positively charged because they lost an electron.
Answer:D
Explanation:trust me bro
Answer:
D
Explanation: I took the test
electron configuration for Li
Answer:
the electronic configuration of Li is
=》 2, 1
and in spdf configuration it's 1s^2 2s^1
Answer: [He] 2s1
Explanation:
Electrons per shell: 2,1
Atomic number: 3
Electronegativity: 0.98
Atomic mass: 6.941 u
Discoverer: Johan August Arfwedson
Period: Period 2 element
If you find a chemical in the lab and are unsure of
its identity, what is the best way to find out what it
is?
Answer:
C. read the label on the container
Explanation:
What information is found in an SDS? Check all that apply.
A. the identification of the chemical
C. the chemical and physical properties of the substance
D. the first-aid measures to take if an accident occurs involving the chemical
Answer:
C
Explanation:
just did it
How is a carbon atom different from a hydrogen atom?
Answer:
Carbon atom is a chemical element with the symbol C and atomic number 6 ( electrons). While Hydrogen atom is an atom of the chemical element hydrogen that have only 1 electron.
Explanation:
The carbon atom different from a hydrogen atom, because the atomic number of hydrogen is 1 . The atomic mass number of hydrogen is also one. For the carbon atom, the atomic number is 6, and the atomic mass number of carbon is 12.
What is an atomic number ?The term atomic number is defined as the number of a chemical element in the periodic system. The elements are arranged in order of increasing number of protons in the nucleus.
The atomic number is situated at the upper left, or number of protons. In the middle is the letter symbol for the element. Atomic number is equal to the proton number or the number of protons found in the nucleus of every atom of that element.
Thus, Carbon atom is a chemical element with the symbol C and atomic number 6. Whereas hydrogen atom is an atom of the chemical element hydrogen that have only 1 electron and its symbol is H.
To learn more about an atomic number, follow the link;
https://brainly.com/question/16858932
#SPJ2
Which element, If combined with lodine, will have the greatest attraction for the lodine electrons?
C
P
B
2) A sample of argon has a volume of 5.0 Land the pressure is 650 mm Hg If the final temperature is
30. C, the final volume is 5.7 L, and the final pressure is 800. mm Hg, what was the initial temperature
of the argon?
Answer:
[tex]T_1 = -57.15^{\circ}C[/tex]
Explanation:
Given
[tex]P_1 = 650mmHg[/tex] --- Initial Pressure
[tex]V_1 = 5.0L[/tex] --- Initial Volume
[tex]V_2 = 5.7L[/tex] --- Final Volume
[tex]P_2 = 800mmHg[/tex] --- Final Pressure
[tex]T_2 = 30C[/tex] ---- Final Temperature
Required
Determine the initial temperature (T1)
This question will be solved using combined gas law which states:
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}[/tex]
However, the final temperature must be converted to degree kelvin
[tex]T_2 = 30C[/tex] --- Add 273.15
[tex]T_2 = 30k + 273.15 k[/tex]
[tex]T_2 = 303.15k[/tex]
Make T1 the subject in [tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}[/tex]
[tex]T_1 = \frac{P_1V_1T_2}{P_2V_2}[/tex]
Substitute values for P1, V1, T2, P2 and V2
[tex]T_1 = \frac{650 * 5.0 * 303.15}{800 * 5.7}[/tex]
[tex]T_1 = \frac{985237.5}{4560}[/tex]
[tex]T_1 = 216.060855263[/tex]
Approximate
[tex]T_1 = 216k[/tex]
Convert to degree Celsius
[tex]T_1 = 216k[/tex] --- Subtract 273.15
[tex]T_1 = 216 - 273.15[/tex]
[tex]T_1 = -57.15^{\circ}C[/tex]
Hence, the initial temperature is -57.15C
When placed in distilled water, the pH of metal oxides will be?
Less than 7
Equal to 7
greater than 7
neutral
When placed in distilled water, the pH of metal oxides will be greater than 7. The correct option is C.
What are metal oxides?Metal oxides are crystalline solids containing both a metal cation and an oxide anion. In most cases, they react with water to form bases or with acids to form salts.
Metal oxides are compounds that contain two elements, namely a metal and an oxygen atom. Examples include sodium oxide (Na2O), magnesium oxide (MgO), calcium oxide (CaO), and others.
When metal oxides react with dilute acids, they form salt and water, demonstrating that they are basic.
Metal oxides are alkaline. When we dissolve them in water, we get solutions with pH values higher than 7. The reaction between a nonmetal and oxygen produces nonmetal oxides. Nonmetal oxides are highly acidic.
Thus, the correct option is C.
For more details regarding metal oxides, visit:
https://brainly.com/question/22966565
#SPJ2
I'm very confused please help
Answer:
the food chain you mean
Explanation:
pollution than mosquitoes then alligators
When does the number of electrons be greater than the number of protons?And give examples.
Answer:
This accepting atom will then become an anion. The anion has more electrons than protons. This means that some of the electrons will not be canceled out, giving the atom an overall negative charge.
If an object has more protons than electrons, then the net charge on the object is positive. If there are more electrons than protons, then the net charge on the object is negative. If there are equal numbers of protons and electrons, then the object is electrically neutral.
Explanation:
Answer quickly plz. CO2 dissolving in bodies of water forms_____
which causes the pH to____? Fill in the blanks.
A. Carbonate Acid; decrease
B. Carbonic Acid; increase
C. Carbonic Acid; decrease
D.Carbonate Acid; increase.
CO2 dissolving in bodies of water forms carbonic acid which causes the pH to decrease.
Hope this helps! Please correct me if im wrong! :)
Answer:C. Carbonic Acid; decrease
Explanation:
Carbonic acid is formed and acid decrease pH
How many moles of nitrogen are in a 14.57 gram sample of nitrogen?
Answer:
[tex]\boxed {\boxed {\sf About \ 1.040 \ moles \ of \ nitrogen }}[/tex]
Explanation:
To convert from grams to moles, we must use the molar mass. This can be found on the Periodic Table. We have a sample of nitrogen, so look for N on the table.
Nitrogen (N): 14.007 g/molNow, use this molar mass as a ratio.
[tex]\frac {14.007 \ g \ N }{1 \ mol \ N }[/tex]
Multiply by the number of grams in the sample (14.57)
[tex]14.57 \ g \ N *\frac {14.007 \ g \ N }{1 \ mol \ N }[/tex]
Flip the fraction so the grams of nitrogen will cancel.
[tex]14.57 \ g \ N *\frac {1 \ mol \ N }{14.007 \ g \ N}[/tex]
[tex]14.57 *\frac {1 \ mol \ N }{14.007 }[/tex]
[tex]\frac {14.57 \ mol \ N }{14.007 }[/tex]
[tex]1.04019419 \ mol \ N \\[/tex]
The original measurement of grams had 4 significant figures, so we need to round our answer to the same number of sig figs.
For the number we calculated, that is the thousandth place. The 1 in the ten thousandth place tells us to keep the 0 in the thousandth place.
[tex]1.040 \ mol \ N[/tex]
There are about 1.040 moles of nitrogen in 14.57 grams.