Answer:
So work require will be 3888×10×10³J
Explanation:
⇒Work done=Change in kinetic energy
⇒KE=1/2mv²
⇒Mass->15000kg
⇒Velocity->72km/h
⇒KE=1/2×15000×(72)²
⇒KE=1/2×15000×5184
⇒KE=7500×5184
⇒KE=3888×10×10³J
What is the name of the process where rocks are being broken down into small grains of sediment or soil?
A) Weathering
B) Erosion
C) Deposition
D) Uplifting
Answer:
a. weathering
Explanation:
weathering is the breakdown of rocks into sediments and soil
The displacement current density between the plates of a parallel-plate capacitor is uniform and has a magnitude of 19.9 A/m2 as the capacitor is being charged. What is dE/dt, the rate at which the electric field strength is changing between the plates
Answer:
[tex]\dfrac{dE}{dt} \approx 2.261 \overline {36} \times 10^{12} \ V/ms[/tex]
Explanation:
The parameters given in the question are;
The magnitude of the displacement current density between the plates of a parallel-plate capacitor, J = 19.9 A/m²
We have;
[tex]i_d = \epsilon _0 \times \dfrac{d \Phi_E}{dt} =\epsilon _0 \times A \times \dfrac{d E}{dt}[/tex]
Therefore;
[tex]\therefore \dfrac{dE}{dt} =\dfrac{i_d}{\epsilon _0 \cdot A} =\dfrac{J}{\epsilon_0} = \dfrac{19.9}{8.8 \times 10^{-12}} \approx 2.261 \overline {36} \times 10^{12}[/tex]
Therefore;
[tex]\therefore \dfrac{dE}{dt} \approx 2.261 \overline {36} \times 10^{12} \ V/ms[/tex]
pls helppp :)List several examples of applied force, normal force, and friction that you’ve observed in your life.
ill mark brainliest if the answer is actually helpful:p
Answer:
an example for applied force is
Explanation:
The applied force is the force applied to the object to either displace it or change its shape.
HOPE THIS HELPS
In which stage do stars spend most of their lifetime?
Answer:
Stars become the main sequence as they move through a galaxy. During this stage, it will fuse hydrogen atoms and form helium molecules in its core for 90 percent of its life. We are currently in the main sequence of our sun's life cycle.
Explanation:
7. A wave was generated by Oscillation and paused at two different times.
Describe differences and similarities in the characteristics of the wave at different times
Answer:
Differences
The position of the particles in the wave are at different positions at the different times The velocity of each particle will posses different magnitudes and directionacceleration of particles will be different as wellsimilarities
wave length and wave speed will remain the same
Explanation:
A wave generated by Oscillation and paused at two different times will maintain certain characteristics at all times while some characteristics will differ along the wave as it it paused
The differences in the characteristics of the wave at different time ( i.e. at paused and unpaused times )
The position of the particles in the wave are at different positions at the different times The velocity of each particle will posses different magnitudes and directionacceleration of particles will be different as wellsimilarities :
wave length and wave speed will remain the same
Which of the following is a learned behavior of a cat
A. Meowing
B. Drinking water
C. Purring when happy
D. Using a litter box
A 0.547 kg pizza is thrown straight up in the air. At a height of 2.30 m above the surface of the earth it has a speed of 5.00 m/s. Calculate the total mechanical energy of the pizza crust.
Answer:
The total mechanical energy of the pizza crust is 19.2 J.
Explanation:
Mechanical energy is that which a body or a system obtains as a result of the speed of its movement or its specific position, and which is capable of producing mechanical work. Then:
Potential energy + kinetic energy = total mechanical energy
Kinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.
Kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed.
Kinetic energy is represented by the following formula:
Ec = ½ *m*v²
Where Ec is kinetic energy, which is measured in Joules (J), m is mass measured in kilograms (kg), and v is velocity measured in meters over seconds (m / s).
In this case:
m=0.547 kgv= 5 m/sReplacing:
Ec = ½ *0.547 kg*(5 m/s)²
and solving you get:
Ec= 6.8375 J
On the other hand, potential energy is the energy that measures the ability of a system to perform work based on its position. In other words, this is the energy that a body has at a certain height above the ground.
Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the force of gravity. Then for an object with mass m, at height h, the expression applied to the gravitational energy of the object is:
Ep = m*g*h
Where Ep is the potential energy in joules (J), m is the mass in kilograms (kg) is h the height in meters (m) and g is the acceleration of fall in m / s² (approximately 9.81 m/s²)
In this case:
m= 0.547 kgg= 9.81 m/s²h= 2.30 mReplacing
Ep= 0.547 kg *9.81 m/s²* 2.30 m
and solving you get:
Ep= 12.342 J
So:
Total mechanical energy= 12.342 J + 6.8375 J
Total mechanical energy= 19.1795 J≅ 19.2 J
The total mechanical energy of the pizza crust is 19.2 J.
Complete the following sentence.
The Richter scale is used to compare the
_____ of earthquakes.
Answer:
magnitude
Explanation:
The Richter scale compares the magnitude or energy of earthquakes
please see the picture
Answer:
t.f. are you sure that's english? it looks like not a real thing
Explanation:
An Athelice complete :Round of a circular track of diameter 200m in base Distance travelled by athletes And displacement
Answer:
Distance = 1256 m
Displacement = 0
Explanation:
Distance :
Distance may be defined as the actual length between two points along its path.
It is a scalar quantity and its value can be positive or zero.
Displacement :
Displacement is defined as the shortest length between two point , i.e. between the initial point and the final point.
It is a vector quantity and it has values which can be either positive or negative or zero.
From the question, the diameter of the circular track is, r = 200 m
∴ Distance travelled by an athlete is = circumference of the circular track
= 2πr
= 2 x 3.14 x 200
= 1256 m
Displacement = 0 (since the original point coincides with the final point).
Why does no one actually help on here?
Answer: i dontt know everyone is annoying
Explanation:
Please help me with a speech.The topic of my speech is Passion.
Answer:
Explanation:
Passion
For me, standing on the summit of Mt Everest was the result of following a process. The process of mountaineering. I love mountaineering. I am passionate about it. I love the months of planning for an expedition, the months of sweating and training to prepare my body physically. The meticulous preparation of my equipment. Most of all I love the huge mental challenge I have to overcome before each climb to confront my own fear. All these reasons are why I climb, they are why I climbed Mt Everest and that is why I continue to climb.
Passion is an enormously powerful force. It gives us the strength to get through hard times and setbacks. It gives us strength to overcome our fears, to ignore what other people think of us, to be disciplined and make sacrifices in pursuit of our dreams. Passionate people do not want to take shortcuts – they consider that ‘learning the process’ is an important part of the journey.
In mountaineering it’s easy to spot those who are not passionate about the process. They want to stand on top of the mountain but they are not really interested in the process of climbing the mountain. I feel for these people. Success without hard work is a hollow, empty feeling. They never last long in the sport.
Just as in life, successful mountaineers are the ones who are passionate. They are not there just to stand on the summit. Their passion gives them the energy to work the hardest, fight the longest, and in the words of Winston Churchill “never, never. never give-up”.
Most metallic elements, such as copper
and iron, have high melting points. This
is a useful property because
F. it keeps cars made of metal from
becoming hot on summer days
G. it enables people to use pots and pans
made of metal to cook food
H. it prevents machine parts made of
metal from rusting
J. it makes metals easier to melt so they
can be poured into molds to make
precision tools
Answer:
G. it enables people to use pots and pans made of metal to cook food
Explanation:
Metals are known to be substances with a relative high melting point, which means that it takes a very high temperature to melt them. As used in this question, copper (Cu) and iron (Fe) at metallic elements that have high melting points.
One advantage of this property based on the options provided is that "it enables people to use pots and pans made of metal to cook food". This is because cooking food requires subjecting them to a constant temperature from a heat source e.g cooker or stove.
The material used to hold the food being cooked must possess a very high melting point to withstand the heat, hence, the importance of these metallic substances. Most pots and pans are made of steel, an alloy of iron, hence, they have high melting point.
a baseball with a mass of 0.8 kg is moving at asperd of 45.0 m/s . what is the baseballs kinetic energy
SOMEONE HELP PLEASE!!
Answer:
0.5*0.8*45^2. =810J
Explanation:
KE=1/2 mv^2
five properties of light
Answer:
Light is electromagnetic radiation that has properties of waves. The electromagnetic spectrum can be divided into several bands based on the wavelength. As we have discussed before, visible light represents a narrow group of wavelengths between about 380 nm and 730 nm.
OR
The primary properties of visible light are intensity, propagation-direction, frequency or wavelength spectrum and polarization, while its speed in a vacuum, 299 792 458 m/s, is one of the fundamental constants of nature.
The diagram shows how Earth is tilted on its axis as it revolves around the Sun. What is the season in the United States when Earth is in position C
Winter
It is winter because the Northern Hemisphere is not facing the sun.
Roark saw Alejandro sitting by himself in the quad and leaning over, with his head resting on the heels of his hands. Roark approached him and said, "Hey Alejandro, you look sad." Alejandro responded, "Huh? No, I'm just thinking." Which difficulty in interpreting nonverbal behavior does this exchange exemplify?
A. Nonverbal messages are often ambiguous.
B. Nonverbal messages are continuous.
C. Nonverbal cues are multichanneled.
D. Nonverbal interpretation is culture-based.
Answer:
Option A
Explanation:
Nonverbal communications are ambiguous because some times the face expressions (non verbal signals – Sad face or sitting alone gesture of Alejandro) and the verbal signals (communication between Roark and Alejandro) do not match or contradict each other. Some people prefer to believe on their interpretations of the nonverbal signals as compared to that of the verbal signals
Hence, option A is correct.
Technician A says that high-intensity discharge (HID) headlights are brighter and have a blue tint. Technician B says that one defective turn signal bulb can cause the turn signal on the affected side to stop blinking (flashing). Who is right?
a) technician A
b) technician B
c) both technicians A and B
d) neither technician A nor B
Answer:
The right option is;
d) Both technicians A and B
Explanation:
High-intensity discharge (HID) headlights is an electrical gas-discharge light that gives a very bright light when an arc is formed between the tungsten electrodes that have a transparent or translucent housing
The light is ideal for night driving due to its brightness and appear to have a bluish tint at night although the light produced by HID headlight is actually more similar to Sunlight around noon
A turn signal bulb is a flashing light indicator that shows that a vehicle is about to turn or change lanes
An issue with the wiring, a broken connection at the bulb socket or a burnt bulb can result in a condition of "no turn signal" in which the turn signal stops flashing or blinking. Therefore both technicians A and B are correct.
please help lol- brainlist to whomever- P.S---> Do it all please, and don't get any wrong. Then you get brainiist.
Glass: inorganic
Water: inorganic
Sugar: organic
Salt: depends what type of salt it is but most likely inorganic
Olive Oil: organic
Which term describes a long-term weather pattern?
air mass
climate
humidity
front
Answer:
Explanation:
The answer is Climate
Answer:
climate
Explanation:
Climate is defined as an area's long-term weather patterns. The simplest way to describe climate is to look at average temperature and precipitation over time.
- 3000 J of work is done on a 2kg object over a distance of 10m. What is the force acting on the object?
A.1500N
B.300N
C.3000N
D.600ON
A wheel initially rotating at 12 rad/s decelerates uniformly to rest in 0.4 s. If the wheel has a rotational inertia of 0.5 kg.m², what is the magnitude of the torque causing this deceleration? (A) 1.5 N.m (B) 15 N.m (C) 30 Nm (D) 38 Nm
Answer:
(B) 15 N.m
Explanation:
The deceleration of the wheel is first found by using the following formula:
[tex]\alpha = \frac{\omega_f - \omega_i}{t}[/tex]
where,
α = angular acceleration = ?
ωf = final angular speed = 0 rad/s
ωi = initial angular speed = 12 rad/s
t = time = 0.4 s
Therefore,
[tex]\alpha = \frac{0\ rad/s - 12\ rad/s}{0.4\ s}\\\\\alpha = -30\ rad/s^2[/tex]
here, the negative sign shows deceleration.
Now, we find the torque responsible for this deceleration:
[tex]\tau = I\alpha[/tex]
where,
τ = torque = ?
I = rotational inertia = 0.5 kg.m²
Therefore,
[tex]\tau = (0.5\ kg.m^2)(30\ rad/s^2)\\[/tex]
τ = 15 N.m
Therefore, the correct answer is:
(B) 15 N.m
What electromagnetic waves are used in these applications?
Diagnosing illnesses:
Warming and cooking food:
Transmitting data from remote controls to televisions:
The electromagnetic waves are used in these applications are:
Diagnosing illnesses: X-rays.
Warming and cooking food: infrared waves.
Transmitting data from remote controls to televisions: Radio waves.
What is electromagnetic waves?The oscillations between an electric field and a magnetic field produce waves known as electromagnetic waves, or EM waves. In other words, magnetic and electric fields oscillate to form electromagnetic (EM) waves.
When an electric field interacts with a magnetic field, electromagnetic waves are created. Therefore, they are referred to as "electromagnetic" waves. An electromagnetic wave's electric field and magnetic field are perpendicular to one another (at right angles). Additionally, they are perpendicular to the EM wave's direction. An electromagnetic wave can pass through any medium, including vacuum, solid materials, and air. It can spread or move from one area to another without the use of a medium.
Learn more about electromagnetic wave here:
https://brainly.com/question/3101711
#SPJ5
Un avión despega a las 2:00 p.M en un vuelo de 2500 millas. El avión llega a su destino a las 7:30 p.M. Explicar por qué hay el menos dos momentos durante el vuelo en los que la velocidad del avión es de 400 millas por hora.
Answer:
Por lo tanto, cuando la velocidad promedio del avión es mayor que la velocidad de vuelo posible dada, entonces es posible tener dos puntos durante el vuelo cuando la velocidad es la de la velocidad dada
Explanation:
La hora de despegue del avión, t₁ = 2:00 p.m.
La distancia del vuelo que viaja el avión = 2,500 millas
La hora de llegada del avión al destino, t₂ = 7:30 p.m.
El tiempo de vuelo, Δt = t₂ - t₁
Por lo tanto, Δt = 7:30 - 2:00 = 5 horas 30 minutos = 5,5 horas
La velocidad media del avión,[tex]v_{ave}[/tex] = (Distancia total) / (Tiempo total)
= 2,500 millas / (5,5 horas) = 454. millas por hora
La velocidad promedio se puede encontrar también sumando velocidades individuales y dividiendo el resultado por el número de velocidades sumadas en la suma
Por ejemplo, tenemos;
∴ [tex]v_{ave}[/tex] = (v₁ + v₂ + v₃ )/3
Si durante el vuelo horizontal directo, la velocidad máxima, v₃ = 509 millas por hora, y v₁ y v₂ son puntos donde el avión se mueve en ángulo con la horizontal y, por lo tanto, velocidad horizontal reducida, entonces tenemos;
En el camino hacia arriba sobre una nube con velocidad horizontal v₁
454.[tex]\overline{54}[/tex] = (v₁ + 509)/2
2 × 454.[tex]\overline{54}[/tex] - 509 = 400.[tex]\overline{09}[/tex] = v₁
∴ v₁ = 400.[tex]\overline{09}[/tex] mph ≈ 400 mph
De manera similar, en el camino de regreso a la elevación del vuelo, tenemos v₂ = 400.[tex]\overline{09}[/tex] mph ≈ 400 mph
Por lo tanto, cuando la velocidad promedio del avión es mayor que la velocidad de vuelo posible dada, entonces es posible tener dos puntos durante el vuelo cuando la velocidad es la de la velocidad dada.
The vertical columns on the periodic table of elements are called groups.
A True
B. False
Answer:
True
Explanation:
How do you calculate the weight of a body from its mass?
Answer:
W = mg
Explanation:
The formula of Weight for given mass is
[tex]\large\boxed{\fcolorbox{blue}{yellow}{W = mg}}[/tex]
where,
m = mass of the body
g = accelaration due to gravity
For Example:
Q.) A body has mass 10 kg then fine it's weight
A.)
m = 10kg
g = 10m/s²
.°. W = mg
= 10 × 10
W = 100N
Thus, The weight of a body from its mass can be calculated by W = mg.
-TheUnknownScientist
A mercury in barometer shows a height of 70cm.What height would be shown in the barometer at the same place if water density 1.0×10³kg/m³ is used(denssity of mercury=13600kgm-³)
Answer:
P = d g h pressure due to density of liquid of height h
d1 g h1 = d2 g h2 since P1 equals P2
d1 h1 = d2 h2 and the density of Hg is 13.6 times that of water
h2 = (d1 / d2) * h1 = 13.6 * 70 cm = 952 cm or 9.52 m
when he drove home his car broke down it wasnt due to a problem with the wheels it was the?
what is the microcoulomb if the coulomb is 1,00
Answer:
Coulomb = 100
Micro coulomb = 100 × 10^-6 = 10^-4 coulomb
describe what happens when light strikes a translucent material, transparent material , opaque material . give one specific example of an object that has each type of surface.
Answer: according to https://www.doe.virginia.gov When light strikes translucent materials, only some of the light passes through them. The light does not pass directly through the materials. ... Opaque objects block light from traveling through them. Most of the light is either reflected by the object or absorbed and converted to thermal energy.
Explanation: