A balloon is filled
with 35.0 L of
helium when the
temperature is
200K. If the tem-
perature rises to
450K, what is the
new volume of the
balloon?

Explanation: where the article????

The data set is missing in the question. The data set is given in the attachment.

Solution :

a). In the table, there are four positive examples and give number of negative examples.

Therefore,

[tex]$P(+) = \frac{4}{9}$[/tex]   and

[tex]$P(-) = \frac{5}{9}$[/tex]

The entropy of the training examples is given by :

[tex]$ -\frac{4}{9}\log_2\left(\frac{4}{9}\right)-\frac{5}{9}\log_2\left(\frac{5}{9}\right)$[/tex]

= 0.9911

b). For the attribute all the associating increments and the probability are :

  [tex]$a_1$[/tex]   +   -

  T   3    1

  F    1    4

Th entropy for   [tex]$a_1$[/tex]  is given by :

[tex]$\frac{4}{9}[ -\frac{3}{4}\log\left(\frac{3}{4}\right)-\frac{1}{4}\log\left(\frac{1}{4}\right)]+\frac{5}{9}[ -\frac{1}{5}\log\left(\frac{1}{5}\right)-\frac{4}{5}\log\left(\frac{4}{5}\right)]$[/tex]

= 0.7616

Therefore, the information gain for [tex]$a_1$[/tex]  is

  0.9911 - 0.7616 = 0.2294

Similarly for the attribute [tex]$a_2$[/tex]  the associating counts and the probabilities are :

  [tex]$a_2$[/tex]  +   -

  T   2    3

  F   2    2

Th entropy for   [tex]$a_2$[/tex] is given by :

[tex]$\frac{5}{9}[ -\frac{2}{5}\log\left(\frac{2}{5}\right)-\frac{3}{5}\log\left(\frac{3}{5}\right)]+\frac{4}{9}[ -\frac{2}{4}\log\left(\frac{2}{4}\right)-\frac{2}{4}\log\left(\frac{2}{4}\right)]$[/tex]

= 0.9839

Therefore, the information gain for [tex]$a_2$[/tex] is

  0.9911 - 0.9839 = 0.0072

[tex]$a_3$[/tex]     Class label      split point       entropy        Info gain

1.0         +                        2.0            0.8484        0.1427

3.0        -                         3.5            0.9885        0.0026

4.0        +                        4.5            0.9183         0.0728

5.0        -

5.0        -                        5.5            0.9839        0.0072

6.0        +                       6.5             0.9728       0.0183

7.0        +

7.0        -                        7.5             0.8889       0.1022

The best split for [tex]$a_3$[/tex]  observed at split point which is equal to 2.

c). From the table mention in part (b) of the information gain, we can say that [tex]$a_1$[/tex] produces the best split.

Answer:

When a molecule absorbs infrared radiation,transition s occur from the ground vibrational state to an excited vibrational state. For a molecule to be IR active there must be a change in dipole moment as a result of the vibration that occurs when IR radiation is absorbed.

Answer:

The options (A) -The rate law for a given reaction can be determined from a knowledge of the rate-determining step in that reaction's mechanism.  and (C) -The rate laws of bimolecular elementary reactions are second order overall ,is true.

Explanation:

(A) -The rate law can only be calculated from the reaction's slowest or rate-determining phase, according to the first sentence.

(B) -The second statement is not entirely right, since we cannot evaluate an accurate rate law by simply looking at the net equation. It must be decided by experimentation.

(C) -Since there are two reactants, the third statement is correct: most bimolecular reactions are second order overall.

(D)-The fourth argument is incorrect. We must track the rates of and elementary phase that is following the reaction in order to determine the rate.

Therefore , the first and third statement is true.

Answer:

False, Solubility increases with temperature for most solids.

Explanation:

Answer: Insufficient amount of work provided.

Explanation:

Answer:  Formula: Mass = (Volume)(Density)

Iron Density = 7.87 g/cm^3

Volume of Iron = 55.2 cm^3

Mass=(V)(D)

Mass= (55.2 cm^3) x (7.87 g/cm^3)

Mass=  434,42 g

Explanation:

Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.

The term density is defined as the measurement of how closely a material is packed together.

It is also defined as the mass per unit volume. Density Symbol is D or ρ Density Formula is ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.

Density is an important because it allows us to find out what substances will float and what substances will sink when placed in a liquid.

Formula:

Mass = (Volume)(Density)

Given:

Iron Density = 7.87 g/cm³

Volume of Iron = 55.2 cm³

Mass=(V)(D)

Mass= (55.2 cm³) x (7.87 g/cm³)

Mass= 434,42 g

Thus, Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.

To learn more about the density, follow the link;

https://brainly.com/question/29775886

#SPJ2

Answer:

All scorpions fluoresce under ultraviolet light, such as an electric black light or natural moonlight. The blue-green glow comes from a substance found in the hyaline layer, a very thin but super tough coating in a part of the scorpion's exoskeleton called the cuticle

Explanation:

Answer:

All scorpions fluoresce under ultraviolet light, such as an electric black light or natural moonlight. Much like many other creepy, crawly insects, scorpions like hiding in dark places. ... If you're worried that you may have a scorpion problem, you can use a black light to search for them at night. When a black light hits a scorpion, the proteins on its exoskeleton create a bright neon blue hue.Scorpions do not like heat and bright light. They lose some of what little water they have to evaporation. So they use their sensitivity to UV rays to determine if it's dim enough for them to crawl out and get to business. He thinks that scorpions glow to convert the dim UV light from the moon and the stars into the colour that they see best – blue-green. This could explain why scorpion eyes are so exquisitely sensitive, to the point where they can detect the faint glow of starlight against the background of the night sky.Given the high densities of scorpions in some areas, their importance in ecological food webs, particularly with respect to helping control insect populations, is considerable. Many are sensitive to environmental degradation and are considered equilibrium species. Ecology: Scorpions are primarily nocturnal.Scorpions are preyed upon by large centipedes, tarantulas, lizards, birds (especially owls), and mammals such as bats, shrews, and grasshopper mice.

Explanation: I added a little more info about them please give me brainliest

Answer:

1. Physical Weathering

2. Option B

Explanation:

1. Physical weathering

On Mars, there are two types of weathering agents a) wind and b) acid fog. Thus, they will carry out only physical weathering

2. Option B

3D can be used to produce things that are required on the Mars and also the locally available raw material can be used for printing thereby saving the cost.

Answer:

Lithium Chloride would be the best one

Sodium Hydroxide would be the second best

Explanation:

Answer:

Explanation:

are where most bits of broken rock are deposited.

This is because oceans are where most bits of broken rock are deposited.

Answer:

1.34 mol

Explanation:

Molarity, which is the molar concentration of a solution, can be calculated by dividing the number of moles (n) by the volume (V).

That is;

Molarity (M) = n/V

According to the information provided in this question;

M = 2.40M

V = 56.0 mL = 56/1000 = 0.056 L

Since molarity = n/V

number of moles = M × V

n = 0.056 × 24

n = 1.34 mol

Answer:

(C) the physical state of each reactant and product

Explanation:

Hope this helps

Answer:

0.4 L

Explanation:

Calculate by using Boyle's Law P₁V₁=P₂V₂

(0.14atm)(2.4L) = (0.84atm)(V₂)

0.336 atmL = (0.84atm)(V₂)

V₂ = 0.336 atmL/0.84atm

V₂ = 0.4 L

Answer:

[tex]\lambda =4.33x10^{-12}m=4.33pm[/tex]

Explanation:

Hello there!

In this case, since the speed, wavelength and mass of an electron are related via the the Broglie wavelength:

[tex]\lambda =\frac{h}{m*v}[/tex]

Thus, by plugging in the mass of the electron and the Planck's constant, we obtain the following wavelength:

[tex]\lambda =\frac{6.626x10^{-34}J*s}{9.11x10^{-31}kg*1.68x10^{8}m/s}\\\\\lambda =4.33x10^{-12}m=4.33pm[/tex]

Best regards!

Answer:

D. Mutation

Explanation:

Mutation is any change or alteration that occurs to the nucleotide sequence of a gene induced during DNA replication or by mutation-causing substances called MUTAGENS.

Mutation can be in the form of addition, removal, or substitution of nitrogenous bases in a DNA molecule. For example, in an original DNA sequence as follows: GAT ATC TGA, the following mutation can occur:

Addition: GAT ATC CTG A

Removal: GAT ATT GA

Substitution: GAT CTC TGA

Answer:

As gas is compressed, the individual molecules begin to move in each others way creating a very repulsive force. It acts to oppose any further volume decrease. At very close distances, all molecules repel each other as their electron clouds emerge.

Explanation:

Answer:

Nitrates compared to sulphates are much more soluble therefore won't form precipitates easily.

Answer:

C

Explanation:

Answer:

2

Explanation:

zeros are not considered sig figs

Answer: The net ionic equation is [tex]2H^+(aq)+2F^-(aq)+Ba^{2+}(aq)+2OH^-(aq)\rightarrow BaF_2(s)+2H_2O(l)[/tex]

Explanation:

The net ionic equation of any reaction does not include any spectator ions.

Spectator ions are defined as ions that do not get involved in a chemical equation. They are found on both the sides of the chemical reaction when it is present in ionic form.

The chemical equation for the reaction of hydrofluoric acid and barium hydroxide follows:

[tex]2HF(aq)+Ba(OH)_2(aq)\rightarrow BaF_2(s)+2H_2O(l)[/tex]

The ionic form of the above equation follows:

[tex]2H^+(aq)+2F^-(aq)+Ba^{2+}(aq)+2OH^-(aq)\rightarrow BaF_2(s)+2H_2O(l)[/tex]

There are no spectator ions in the ionic form.

The net ionic equation for the above reaction follows:

[tex]2H^+(aq)+2F^-(aq)+Ba^{2+}(aq)+2OH^-(aq)\rightarrow BaF_2(s)+2H_2O(l)[/tex]

Answer:

Dont completly trust me here but i think its a but id try and wait for someone else just be careful

Explanation:

Answer:

nah

Explanation:

Answer:

80 ml

Explanation:

From the question,

Applying Dilution formular

MV = mv................... Equation 1

Where M = Molarity of Kl before dilution, V = Volume of Kl before dilution, m = molarity of Kl after dilution, v = volume of Kl after dilution.

make V the subject of the equation

V = mv/M............. Equation 2

Given: m = 1.00 M, v = 200 ml, M = 2.50 M

Substitute these values into equation 2

V = (1.00×200)/2.50

V = 80 ml

Answer:

[tex]ZnCO_3(s)+2KNO_3(aq)[/tex]

Explanation:

Hello there!

In this case, for the referred reactants side, we can evidence that this is a double displacement reaction whereby Zn gets bonded with CO3 and therefore K gets bonded with NO3 to yield:

[tex]Zn(NO_3)_2+K_2CO_3\rightarrow ZnCO_3+2KNO_3[/tex]

Whereas the KNO3 product is aqueous and the ZnCO3 is solid due to the corresponding solubility rules. Thereby, the answer is the third one.

Regards!

Answer:

Objects appear different colours because they absorb some colours (wavelengths) and reflected or transmit other colours. ... For example, a red shirt looks red because the dye molecules in the fabric have absorbed the wavelengths of light from the violet/blue end of the spectrum

A red object appear red because it absorbs light of wavelengths other than red. Therefore, option C is correct.

The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal propagated in space or along a wire is defined as the wavelength. This length is typically specified in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).

A transverse wave's wavelength is defined as the distance between two adjacent crests. A longitudinal wave's wavelength can be calculated as the distance between two adjacent compressions.

The wavelengths that are reflected or transmitted are what we see as colors. A red shirt, for example, appears red because the dye molecules in the fabric have absorbed light wavelengths from the violet/blue end of the spectrum. The only light reflected from the shirt is red light.

Thus, option C is correct.

To learn more about the wavelength, follow the link;

https://brainly.com/question/13533093

#SPJ6

Answer:

1. Temperature,  the average kinetic energy of particles, indicates how warm something is. Thermal energy, or the overall kinetic energy of the particles, indicates how a substance or material will transmit heat or chill something else.

2. A thermal expansion is a matter to change in volume in response to a change in temperature.

3. Heat is the form of energy that is transferred between systems or objects with different temperatures.

4. Air temperature near or over bodies of water is much different from that over land due to differences in the way water and land heat and cool. Properties that affect water temperature are transparency, ability to circulate, and specific heat.

5. Radiation is the transfer of heat energy through space by electromagnetic radiation.

6.  Radiation is natural and found everywhere, it comes from outer space, the air we breathe, and the earth we tread.

7. When a fluid, such as air or a liquid, is heated and then travels away from the source, it carries the thermal energy along. The fluid above a hot surface expands, becomes less dense, and rises.

8. Convection currents in the Earth occur in the mantle

9. The fire's heat causes molecules in the pan to vibrate faster, making it hotter. These vibrating molecules collide with their neighboring molecules, making them also vibrate faster.

10. Since air is a poor conductor, most energy transfer by conduction occurs right near Earth's surface. Conduction directly affects air temperature only a few centimeters into the atmosphere.

- Hope this helps!

Answer:

Nitrogen cycle

Explanation: