Answer:
1.63 A and in clockwise direction
Explanation:
The magnetic field due to the rectangular loop is :
[tex]$B=\frac{2 \mu_0 I}{\pi}\left(\frac{\sqrt{L^2+W^2}}{LW}\right)$[/tex]
Given : W = 4.20 cm
[tex]$=4.20 \times 10^{-2} \ m$[/tex]
L = 9.50 cm
[tex]$= 9.50 \times 10^{-2} \ m$[/tex]
[tex]$B = 3.40 \times 10^{-5} \ T $[/tex]
Rearranging the above equation, we get
[tex]$I=\frac{B \pi LW}{2 \mu_0\sqrt{L^2+W^2}}$[/tex]
[tex]$I=\frac{(3.40 \times 10^{-5}) \pi(9.50 \times 10^{-2})(4.20 \times 10^{-2})}{2(4 \pi \times 10^{-7})\sqrt{(9.50 \times 10^{-2})^2+(4.20 \times 10^{-2})^2}}$[/tex]
I = 1.63 A
So the magnitude of the current in the rectangular loop is 1.63 A.
And the direction of current is clockwise.
the moon's mass is ____?
Answer:
7.35..kg
Explanation:
Hope this will help you
Please,Mark me as Brainllist .
Compare the motions of transverse, longitudinal, and combined waves.
Explanation:
transfer to babes are always at your advice by a particular motion being a particular wave motion along didn't wave is a wave which particular is a medium move a direction parallel to the direction of the wave moves something that is similar in the surveys on the medium moves of the same direction and bathe an accident to one or two Dimensions do in London killing babe attacks in one dimension and transverse waves attacks in two Dimensions the Waze cannot be paralyzed or organized
What is the instantaneous velocity of the hummingbird at t=1s?
The distance - time graph of the humming bird is missing, so i have attached it.
Answer:
Instantaneous velocity = 0.5 m/s
Explanation:
From the attached graph, at time t = 1 s, the corresponding distance is 0.5 m.
Instantaneous velocity is the velocity at that point.
Thus;
Instantaneous velocity = 0.5/1
Instantaneous velocity = 0.5 m/s
PLEASE HELP ME I AM TIMED!
Answer:
they all need a source of oxygen
Answer:
B
Explanation:
How many calories are released when 6 grams of 100°C steam turns to 0°C ice?
Answer: 4276.2 calories
Explanation:
Given
mass of steam is 6 gm at [tex]100^{\circ}C[/tex]
Conversion of steam to ice involves
steam to water at [tex]100^{\circ}C[/tex]water at [tex]100^{\circ}C[/tex] to water at [tex]0^{\circ}C[/tex]water to the ice at [tex]0^{\circ}C[/tex]Calories released during the conversion of steam to water at [tex]100^{\circ}C[/tex]
[tex]E_1=mL_v\quad [L_v=\text{latent heat of vaporisation}]\\E_1=6\times 533=3198\ cal.[/tex]
Calories released during the conversion of water at [tex]100^{\circ}C[/tex] to water at [tex]0^{\circ}C[/tex]
[tex]E_2=mc(\Delta T)\quad [c=\text{specific heat of water,}1\ cal./gm.^{\circ}C]\\E_2=6\times 1\times 100=600\ cal.[/tex]
Calories released during the conversion of water to the ice at [tex]0^{\circ}C[/tex]
[tex]E_3=mL_f\quad [L_f=\text{latent heat of fusion}]\\E_3=6\times 79.7=478.2\ cal.[/tex]
The total energy released is
[tex]E=E_1+E_2+E_3\\E=3198+600+478.2=4276.2\ cal.[/tex]
Can someone pls answer
Answer:
im still in elementry so you got to do it yo self
Explanation:
so me confused
What is the relationship between the valence electrons of an atom and the chemical bonds the atom can form?
Answer:
Valence electrons are outer shell electrons with an atom and can participate in the formation of chemical bonds. In single covalent bonds, typically both atoms in the bond contribute one valence electron in order to form a shared pair. The ground state of an atom is the lowest energy state of the atom.
This force on compass dials is an example of a force that _______.
it took 500 n of force to push a car 4 meters. how much work was done?
Answer:
2000J
Explanation:
The formula for work is W=Force x Distance
W=FxD
W=500N x 4m
W=2,000 Joules
True or False: The northern & southern lights are caused by solar wind particles interacting with gases in our atmosphere.
Answer:
False.
Explanation:
An aurora is a natural electric phenomenon that creates bright and colorful light displays in the sky. These dramatic and colorful lights are created when electrically charged particles from solar winds enter the Earth's atmosphere and interact with gases in the atmosphere.
An entertainer pulls a table cloth off a table leaving behind the plates and sliverware undisturbed is an example of
A.
the law of balanced forces
B.
Newton's second law
C.
Newton's third law
D.
Newton's first law
Answer:
D. Newton's first law
Explanation:
Newton's first law of inertia says that an object will remain how it is, unless affected by an outside force. In this case, the plates want to remain stationary(not moving). Therefore, if you pull the table cloth fast enough, the force of friction produced will be small enough so that the Inertia of the plates will overcome the force of friction.
A 150 g pinball rolls towards a springloaded launching rod with a velocity of 2.0 m/s to the west. The launching rod strikes the pinball and causes it to move in the opposite direction with a velocity of 10.0 m/s. What impulse was delivered to the pinball by the launcher?
Answer:
I = 1.8 N s, it is directed towards the right
Explanation:
For this exercise we use the relationship between momentum and moment
I = Δp
F t = p_f - p₀
in this case the initial velocity is v₀ = - 2,0 m / s and final velocity v_f = 10,0 m / s, we assume the positive right direction
I = m (v_f - v₀)
let's calculate
I = 0.150 (10.0 - (-2.0))
I = 0.150 (10 + 2)
I = 1.8 N s
as the impulse is positive it is directed towards the right
Mass of trolley (m):
(1)
0,9
kg
Mass
m xa
Acceleration
(a)
(mos)
Applied
Force (N)
0
4,04
O112
Tabulate your measurements in the table below.
At from A to B (s)
Average
Kg
At (s)
1
2
3
Hanger only
4,07 4,00
HOS
Hanger +
1 mass piece
10
3,09
3,04 3,10
3,14
Hanger +
2 mass pieces
ao
2,00
Hanger +
3 mass pieces 30
1196
1,91
Hanger +
4 mass pieces
168 1,69 1,TO 1,69
(5)
0,21
2,1 x 103 0, 098
O #4
8,8X10
2,22 2,14
0, 196
01 SS
0102
o zau
0103
01392
0/ 70
(5)
(5)
QUESTIONS AND ANALYSIS
1.
In this experiment identify the...
1.1
independent variable
(1)
1.2 dependent variable
3 E
1.3
controlled variable
Ар со
2.
3
Describe how the effect of friction was minimised in the experiment.
(1)
Use the recorded data to plot a graph that will show the relationship
between the acceleration and the applied force on the trolley. Use a (8)
graph paper.
Ilse the cranh to determine the mass of the trolley.
(4)
Answer:
ij
Explanation:
Which is a property of every
mixture?
Please help, I do NOT need any links.
Answer:
P since without a host the parasite won't be able to survive they would start decreasing as well but if the hosts were no more then they would go extinct. But since it is just decreasing then it should be P
Convert 0.0779 kg to g
A transverse wave vibrates its medium __________ to the forward motion of the wave, and a longitudinal wave vibrates its medium __________ to the forward motion of the wave.
perpendicular; circularly
parallel; circularly
parallel; perpendicular
perpendicular; parallel
Answer:
Perpendicular ; Parallel
Write the SI unit of time and temperature
Answer:
The SI unit of time is second (s) and temperature is Kelvin (K)
Explanation:
hope it is helpful to you
find the torque when the work done to more through an angel of 1/4π radians is 3j
Answer:
The torque is approximately 3.82 N·m
Explanation:
The relationship between work done, 'W', and the applied torque, 'τ' can be presented as follows;
W = τ × Δθ
Where;
W = The work done by the torque
τ = The magnitude of the torque
Δθ = The angle through which the object is turned
The parameters for 'W' and 'Δθ' are;
W = 3j
Δθ = 1/4 × π
From W = τ × Δθ, we have;
τ = W/Δθ
∴ τ = 3j/(1/4 × π) ≈ 3.81971863421 N·m
The torque, τ ≈ 3.82 N·m
Two identical charged pith balls are brought together to touch each other. They are then
allowed to move freely. The charge on pith ball A is –30 nC and on pith ball B is – 5 nC.
What is the charge on each after they separate?
Answer:
-17.5 nC
Explanation:
charge A = -30 nC
charge B = -5 nC
After adding them it would be the average of the two charges because of the getting same voltage difference. so
c = (-30+(-5)) / 2 nC
c= -17.5 nC
answer is -17.5 nC
The 500-N force F is applied to the vertical pole as shown(1) Determine the scalar components of the force vector F along the x'- and y'-axes. (2) Determine the scalar components of F along the x- and y'-axes.
Solution :
Given :
Force, F = 500 N
Let [tex]$ \vec F = F_x\ \hat i + F_y\ \hat j$[/tex]
[tex]$|\vec F|=\sqrt{F_x^2+F_y^2}$[/tex]
∴ [tex]$F_x=F \cos 60^\circ = 500 \ \cos 60^\circ = 250 \ N$[/tex]
[tex]$F_y=-F \cos 30^\circ = -500 \ \cos 30^\circ = -433.01 \ N$[/tex] (since [tex]$F_y$[/tex] direction is in negative y-axis)
[tex]$F=250 \ \hat i - 433.01 \ \hat j$[/tex]
So scalar components are : 250 N and 433.01 N
vector components are : [tex]$250 \ \hat i$[/tex] and [tex]$-433.01\ \hat j$[/tex]
1. Scalar components along :
x' axis = 500 N, since the force is in this direction.
[tex]$F_{x'}= F \ \cos \theta = 500\ \cos \theta$[/tex]
Here, θ = 0° , since force and axis in the same direction.
So, cos θ = cos 0° = 1
∴ [tex]$F_{x'}=500 \times 1=500\ N$[/tex]
[tex]$F_{y'}= F \ \sin \theta = 500\ \sin 0^\circ=500 \times 0=0$[/tex]
[tex]$F_{y'}=F\ cos \theta$[/tex] but here θ is 90°. So the force ad axis are perpendicular to each other.
[tex]$F_{y'}=F\ \cos 90^\circ= 500 \ \cos 90^\circ = 500 \times 0=0$[/tex]
∴ [tex]$F_{x'}= 500\ N \text{ and}\ F_{y'}=0\ N$[/tex]
2. Scalar components of F along:
x-axis :
[tex]$F_x=F\ \cos \theta$[/tex], here θ is the angle between x-axis and F = 60°.
[tex]$F_x=500 \times \cos60^\circ=250\ N$[/tex]
y'-axis :
[tex]$F_{y'}=F\ \cos \theta$[/tex], here θ is the angle between y'-axis and F = 90°.
[tex]$F_{y'}=500 \times \cos90^\circ=500\times 0=0\ N$[/tex]
∴ [tex]$F_{x}= 250\ N \text{ and}\ F_{y'}=0\ N$[/tex]
Which statement explains why 49 is a perfect square?
Answer:
It’s the product of 7 x 7. The square root of 49 is 7
Explanation:
It’s the product of 7 x 7. The square root of 49 is 7
1:How are energy and amplitude of a wave related
2:Define Wavelength
3:What unit is the frequency of a wave measured in?
Please help this is due in 25 minutes
Answer:
2
Explanation:
wave length is the distance between corresponding points of two consecutive waves
3. hertz
Which of the following correctly defines the speed of a wave?
O A. v=1
B. A = vf
O C. v= f 2
OD. =v2
Answer:
V = f x λ
Explanation:
The options are confusing
a 5.2kg bowling ball is accelerated from rest to a velocity of 12 m/s as the bowler covers 5.0m of approach before releasing the ball. what force is exerted on the ball during this time?
Answer:
74.88N
Explanation:
From the question,
F = ma................... Equation 1
Where F = force exerted on the ball, m = mass of the ball, a = acceleration
But,
v² = u²+2as.............. Equation 2
Where v = final velocity, u = initial velocity, s = distance.
Given: v = 12 m/s, u = 0 m/s (from rest), s = 5.0 m
Substitute into equation 2 and solve for a
12² = 0²+2×a×5
144 = 10a
10a = 144
a = 144/10
a = 14.4 m/s²
Also Given: m = 5.2 kg,
Substitute into equation 1
F = 5.2×14.4
F = 74.88 N
Hence the force exerted on the ball is 74.88 N
A Scooter travelling at 10m/s speed up to 20m/s in 4 sec.find the acceleration of scooter
Answer:
2.5 m/s²
Explanation:
Given,
Initial speed ( u ) = 10 m/s
Final speed ( v ) = 20 m/s
Time ( t ) = 4 seconds
To find : Acceleration ( a ) = ?
Formula : -
a = ( v - u ) / t
a = ( 20 - 10 ) / 4
= 10 / 4
= 5 / 2
a = 2.5 m/s²
Therefore,
The acceleration of the scooter is 2.5 m/s²
Plz Helpp
A vehicle has a Kinetic Energy of 75000 J and is moving at a velocity of 5 m/s. What is the mass of the vehicle?
300
could i get brainiest
bit.♠ly/3♠vhMu♠vJ remove symbols before searching or it wont work, there was a bug stoping me from attaching the image so there it is
Answer:
k and...
Explanation:
Answer:
no thank you.
explanation: Do not want to
POR FAVOR AYUDENME A RESOLVER ESTO:
Halla el coeficiente de dilatación lineal de una varilla que a 10 grados centígrados mide 125 metros y cuya longitud a 85 grados centígrados es 125.20 m. ¿De qué material será?
Answer:
α = 2.13 10⁻⁵ C⁻¹ , the closest material is ALUMINUM
Explanation:
The expression for thermal expansion is
ΔL = α L₀ ΔT
temperatures are
ΔT = 85 - 10 = 75 ° C
the length of the rod is L₀ = 125 m and L_f = 125.20 m
ΔL = 125.20 - 125 = 0.20 m
α = [tex]\frac{1}{L_o} \frac{\Delta L }{\Delta T}[/tex]
α = [tex]\frac{ 1}{125} \ \frac{0.20 }{75}[/tex]
α = 2.13 10⁻⁵ C⁻¹
When reviewing the table, the closest material is ALUMINUM
Please help me with 17 and 18!!!!!! (It's related to 16) It's due today!!!!! NO LINK PLEASE!!!!!!!!
Answer:17: A wave can be defined as follows: It is important to realize that a wave is quite a different object than a particle. A baseball thrown though a window transfers energy from one point to another, but this involves the movement of a material object between two points.
Explanation:
18: In this way, we classify waves into electromagnetic and mechanical waves. The main difference between mechanical and electromagnetic waves is that electromagnetic waves do not require a medium to propagate whereas mechanical waves require a medium in order to propagate.