Help it’s about Binary compounds and transition metals
Answer:
Cr 6+ & SO4 2-
Explanation:
Sulfate is a polyatomic ion that has a charge of 2-. There are three of them in the chemical formula so it equates to a 6- total charge. Thus, chromium must have a 6+ charge to give the compound a neutral charge.
when 70.0 grams of mno2 reacted with 128.0 grams of hcl, the reaction resulted in a 62.7% yield of chlorine gas. what is the actual yield of chlorine gas in grams? Mno2 + HCI —> MnCl2 + h2o + cl2
Answer:
35.8g of Cl₂ is the yield
Explanation:
Based on the reaction:
MnO₂ + 4HCl → MnCl₂ + 2H₂O + Cl₂
1 mole of MnO₂ and 4 moles of HCl react producing 1 mole of Cl₂
To solve this question we must find limiting reactant. with limiting reactant we can find the theoretical yield of Cl₂. As the actual yield is the 62.7% we can find actual yield of Cl₂ in grams:
Moles MnO₂ -Molar mass: 86.9368g/mol-:
70.0g * (1mol / 86.9368g) = 0.805 moles
Moles HCl -Molar mass: 36.46g/mol-:
128.0g * (1mol / 36.46g) = 3.51 moles
For a complete reaction of 3.51 moles of HCl are required:
3.51 moles HCl * (1mol MnO₂ / 4mol HCl) = 0.878 moles MnO₂.
As there are just 0.805 moles of MnO₂, MnO₂ is limiting reactant.
1 mole of MnO₂ produce 1 mole of Cl₂. The theoretical moles of Cl₂ produced are 0.805 moles.
As the yield is of 62.7%, the yield of Cl₂ is:
0.805 moles * (62.7 / 100) = 0.505 moles Cl₂. In grams:
0.505 moles Cl₂ * (70.906g / mol) =
35.8g of Cl₂ is the yieldConsider a solution which is 0.10M in NH3 and 0.20M in NH4Cl. Choose ALL of the following that are false. If a small amount of NaOH is added, the pH becomes slightly more basic. If HCl is added, the H ions react with the NH3. If a small amount of HCl is added, the pH becomes slightly more basic. If NaOH is added, the OH- ions react with the NH3. If NH4NO3 is added, the pH becomes more basic.
Answer:
The incorrect or the false options are -
(B) - If NH4NO3 is added, the pH becomes more basic.
(D) - If a small amount of HCl is added, the pH becomes slightly more basic.
(E) - If NaOH is added, the OH- ions react with the [tex]NH_3[/tex].
Explanation:
The given solution the buffer basic .
When a small amount of either is added, the hydrogen ion reacts with the ammonium ion, raising the pH slightly.When a small amount of HCl is added, the hydronium ion reacts with the ammonia, raising the pH slightly.Therefore , the options A ( If a small amount of NaOH is added, the pH becomes slightly more basic.) and C ( If HCl is added, the H+ ions react with the NH3.) All other B , D , E are false .
How do you balance: Al+Fe3O4=Al2O3+Fe ?
Answer:
8Al+3Fe3O4=4Al2O3+9Fe
Answer:
8Al + 3Fe3O4 → 4Al2O3 + 9Fe
Explanation:
Is chemistry required to get into speech language pathology?
Answer:
As of right now (4-7-2021), the physical science requirement for the SLP certificate must be met by completing coursework in the areas of either chemistry or physics.
Marked out of 1.50
A student weights his unknown sample on
uncalibrated balance and obtains a weight of
1.0555 g. If the true weight of the unknown sample
is 1.0755 g, what is the % relative error in his
weight measurements?
+0.94٪
- 1.86%
+1.86%
-0.94
Answer:
+.0.94%
Explanation:
Relative and average atomic mass both describe properties of an element related to its different isotopes. Out of these two Relative atomic mas is more accurate. Thus the % relative error in his weight measurements is +.0.94%.
What is mass?Mass defines the quantity of a substance. It is measured in gram or kilogram. Average mass is the mass of atoms of an element that are isotopes. It can be calculated by multiplying mass of a isotope to natural abundance of that isotope.
The relative mass is the mass that is with respect to mass of a matter that is considered as standard. In chemistry relative mass is equal to the mass of one-twelfth the mass of C-12 isotope .
% relative error=(Difference in weight÷ original weight)×100
Difference in weight= original weight -calculated weight
original weight=1.0755 g
calculated weight=1.0555 g
Difference in weight= 1.0755 g-1.0555 g=0.02g
% relative error=(0.02g÷ 1.0755 g)×100
=+.0.94%
Thus the % relative error in his weight measurements is +.0.94%.
To learn more about mass, here:
https://brainly.com/question/28704035
#SPJ2
How many molecules of O2 will be formed from 0.500 grams of KCIO3
Answer:
3.7 x 10²¹ O₂ molecules
Explanation:
2KClO₃ => 2KCl + 3O₂
given 0.500g KClO₃ => 0.500g/122.55g/mol = 0.0041 mole KClO₃
0.0041 mole KClO₃ => 3/2(0.0041) mole O₂ = 0.0061 mole O₂
0.0061 mole O₂ = 0.0061 mole O₂ x 6.02 x 10²³ molecules O₂/mole O₂
= 3.7 x 10²¹ molecules O₂
Predict the product for the following reaction sequence.3,4-dimethyl-7-nonanol 3,4-dimethyl-7-nonanone 6,7-dimethyl-3-nonanone 6,7-dimethyl-3-nonanal 6,7-dimethyl-3-nonanol
Answer:
Hello your question is incomplete attached below is the complete question
answer : 6,7-dimethyl-3-nonanone ( B )
Explanation:
The product for the following reaction sequence as attached below is
6,7-dimethyl-3-nonanone
The following reaction sequence can be categorized under Carbon Nucleophiles.
Carbon Nucleophiles which can be used to convert aldehydes and ketones into carboxylic acids or alkenes.
The product for the given reaction sequence is 6,7-dimethyl-3-nonanone.
IUPAC (International Union of Pure and Applied Chemistry) naming is a systematic method used to name chemical compounds according to a set of rules established by the IUPAC.
The purpose of IUPAC naming is to provide a consistent and unambiguous way to communicate the structure of a compound through its name.
The outcome of the subsequent chain of reactions, which is appended below, is 6,7-dimethyl-3-nonanone
Under the heading of Carbon Nucleophiles, the following reaction chain can be categorised.
Aldehydes and ketones can be transformed into carboxylic acids or alkenes using carbon nucleophiles.
Thus, the answer is 6,7-dimethyl-3-nonanone.
For more details regarding IUPAC naming, visit:
https://brainly.com/question/16631447
#SPJ6
Your question seems incomplete, the probable complete question is:
which method is adopted in the seperation of lead chloride from water
Explanation:
by dissolving the mixture of lead sulphate and lead chloride in water we can separate the two. after dissolving the mixture on water lead sulphate can be obtained as the solid that 's left behind lead chloride can be recovered by evaporating.
How many milliliters of a 25% (m/v) NaOH solution would contain 75 g of NaOH?
A 19 mL
B) 25 mL
C
33 mL
D
75 mL
E
3.0 x 102 mL
Answer:
E 3.0 x 10² mL.
Explanation:
Hello there!
In this case, according to the formula for the calculation of the mass-volume percent:
[tex]\% m/V=\frac{m_{solute}}{V_{solution}}*100\%[/tex]
Whereas it is necessary to know the mass of the solute and the volume of the solution. Thus, given the mass of NaOH as the solute, the volume of the solution would be:
[tex]V_{solution}=\frac{m_{solute}}{\% m/V}*100\%[/tex]
Then, by plugging in we obtain:
[tex]V_{solution}=\frac{75g}{25\%}*100\%\\\\V_{solution}=3.0x10^2mL[/tex]
Thus, the answer is E 3.0 x 10² mL.
Best regards!
The overall redox equation for the voltaic cell can be written as ^^^. What is being reduced in this forward reaction?
Answer:
Cu⁺² is being reduced in that reaction.
Explanation:
Zn(s) + Cu⁺²(aq) → Zn⁺²(aq) + Cu(s)When a substance is reduced, its oxidation number is reduced -changing to a lower value than original-.
Cu⁺² turned into Cu. Meaning that the oxidation number changed from +2 to 0.
Thus, Cu⁺² is being reduced in that reaction.
A piece of unknown solid substance weighs 437.2 g, and requires 8460 J to increase its temperature from 19.3 °C to 68.9 °C.What is the specific heat of the substance?
Answer:
0.3832
Explanation:
Givens
m = 437.2 grams
c = ?
delta t = 69.8 - 19.3
H = 8460 J
Formula
H = m*c*Δt
Solution
8460 = 437.2 * c * (69.8 - 19.3)
8460 = 437.2 * c * 50.5
8460 = 22078.6 * c
c = 8460 / 22078,6
c = .3832 J / (oC * gr)
Calculate the pH when [H]= 7.5 x 10^-12M
Answer:
11.1249387366083
Explanation:
you do -log([H+]
What would you do during a zombie apocalypse
A. run and hide
B. fight back
C. save some people
D. raid survivor's homes
E. keep your family alive
Answer:
C
Explanation:
because then you'd be able to make a group to raid, run with you, and save more people.
Convert 0.0338 moles of K3PO4 to grams.
what is the molecular geometry for CH2Br2?
HCH bond angle is ~110 degrees.
At some temperature for the equilibrium PX3(g) + X2(g) # PX5(g) the equilibrium constant is 0.74. At the same temperature the equilibrium constant for PX5(9) + PX3(g) X2(g) is
Answer: The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35
Explanation:
Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]
For the given chemical reaction:
[tex]PX_3(g)+X_2(g)\rightarrow PX_5(g)[/tex]
The expression for [tex]K_c[/tex] is written as:
[tex]K_c=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]
[tex]0.74=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]
For the reverse chemical reaction:
[tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex]
The expression for [tex]K_c'[/tex] is written as:
[tex]K_c'=\frac{[PX_3]^1[X_2]^1}{[PX_5]^1}[/tex]
[tex]K_c'=\frac{1}{K_c}=\frac{1}{0.74}=1.35[/tex]
The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35
Bacteria can be heterotrophs or autotrophs
true or false?
Answer:
True
Explanation:
I learned about it a few years ago
The particle in the atom with a negative charge is the...
Answer: electrons
Explanation: An atom consists of a positively charged nucleus, surrounded by one or more negatively charged particles called electrons.
1. What organ system is responsible for controlling all of the body
functions?
Answer:
The human brain is the body's control center, receiving and sending signals to other organs through the nervous system and through secreted hormones. It is responsible for our thoughts, feelings, memory storage and general perception of the world. The human heart is a responsible for pumping blood throughout our body
The trait that seems to fade into the background.
Dominant
Recessive
Question 7 point
What is the name of the covalent compound with the formula P2N3?
Draw a resonance structure, complete with all formal charges and lone (unshared) electron pairs, that shows the resonance interaction of the acetoxy with the ortho position in phenyl acetate.
Answer:
See explanation
Explanation:
The acetoxy group in ortho position in phenyl acetate does interact with the phenyl moiety in the molecule via resonance.
This detailed interaction of the acetoxy group in ortho position in phenyl acetate with the phenyl moiety in the molecule via resonance is shown in the image attached.
This interaction is made possible because the oxygen atom of the acetoxy group has lone pairs of electrons that are suitably positioned to interact with the ring via resonance.
wich strong nucleophil h2s or water??and why??
According to my notes, nucleophilicity order is directly proportional to basicity order in an aprotic medium, and is inversely proportional to basicity order in protic medium. And H2O is a stronger base than H2S, so it should be the strong nucleophile, but the answer is given as H2S is the stronger nucleophile.
hope this helped, good luck <3
What kind of waste is shown in the photograph?
A. Composted waste
B. E-waste
C. Hazardous waste
O D. Septic system waste
is copper II nitrate binary or ternary
Answer:
Ternary
Explanation:
A ternary ionic compound is an ionic compound composed of three or more elements. Copper II Nitrate is a ionic compound and contains 3 elements thus making it Ternary
The weak base ionization
constant (Kb) for C4H4N2 is
equal to
Answer:
A
Explanation:
The weak base ionization constant (Kb) for [tex]C_{4} H_{4} N_{2}[/tex] is equal to Option A.
Are weak foundations made of ionized?A weak foundation is a base that makes ionize only slightly in an aqueous solution. Remember that a foundation can be defined as an object, which receives a hydrogen ion from another object.
What is the kb of a weak foundation?To obtain an aqueous solution of a weak acid, the dissociation constant is called the acid ionization constant (Ka). Similarly, the constant equilibrium of a weak base reaction with water is the base ionization constant (Kb). In any conjugate acid-base pair, KaKb = Kw.
Learn more about ionization here: brainly.com/question/25676623
#SPJ2
what volume of 1.75 h2so4 would be needed to neutralize 350 ml of 3.33 m sodium hydroxide?
Answer:
1.332 L
Explanation:
The reaction that takes place is:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂OFirst we calculate the number of NaOH moles, using the given volume and concentration:
350 mL * 3.33 M = 1165.5 mmol NaOHThen we convert NaOH moles into H₂SO₄ moles, using the stoichiometric coefficients:
1165.5 mmol NaOH * [tex]\frac{2mmolH_2SO_4}{1mmolNaOH}[/tex] = 2331 mmol H₂SO₄Finally we calculate the required volume of a 1.75 M solution of H₂SO₄, using the concentration and number of moles:
2331 mmol / 1.75 M = 1332 mLWe can convert mL into L:
1332 mL / 1000 = 1.332 LWhich statement accurately describes renewable energy sources?
1. They provide the majority of the energy for the United States.
2. They take millions of years to form and should be used responsibly.
3. They are found in nearly limitless supply.
4. They include fossil fuels and hydroelectric power.
thesis: physical science improves nursing through technology, energy, and Matter.
write a 4-page essay explaining how science improves Nursing career and how it revolves around
Technology
Energy
Matter
Answer:
When science educators teach nurses, their primary aim should be to help them to develop understanding of their world of nursing. From a study of registered nurses' conceptions of the physical science underlying their clinical practice, we assert that nurses' understanding of the physical sciences is inadequate in terms of the competencies required of them as nurses.
Explanation: Hopes this helps You A lot :-D