Answers
Answer:
So, only one electron is there with n = 0, l = 0 and its quantum set is n = 0, l = 0, ml = 0, ms = -1/2. Hope, this is helping. The maximum number of electrons that can fit inside a 'n' shell is 2n^2. So it would be 1.
Explanation:
Quantum numbers are defined as the set of four numbers with the help of which we can get complete information about the electrons in an atom. Here the term 'n' represents the principal quantum number.
What is principal quantum number?The quantum number which represents the main energy level or shell in which electrons are present. It also determines the average distance of orbital or electron from the nucleus. It can have the whole number values like 1,2,3,4, ....
1. When n = 2, the maximum number of electrons present is 8. That is one 's' sub level and three 'p' sub levels. The spin of four electrons will be +1/2 and other four will be -1/2.
2. When l = 3, the possible orientations = 2l + 1 = 2(3) + 1 = 7. So the maximum number of electrons is 14.
3. The value of ml = -1 indicates only one orbital. So the maximum electrons is 2.
4. Here ml = -1, 0, 1 which shows three orbitals. So in ml = -1, there are only two electrons.
To know more about quantum number, visit;
https://brainly.com/question/2193783
#SPJ2
Related Questions
Help please I’ll mark as brainiliest
Answers
Answer:
B B
W BW BW
W BW BW
Explanation:
Hope this helps
Obsidian _____.
is formed from sand and quartz
cools very quickly
has large mineral crystals
cools very slowly
Answers
Answer:
Cools Very Quickly
Explanation:
This is the right answer!
Water pollution has severely impacted animals and plants in New York's Hudson
Answers
A mixture of NO2 and N2O4 gas is at equilibrium in a closed container. These gases react with the equation 2NO2 ⇌ N2O4. What will happen if the size of the container is increased?
Answers
Answer:
Equilibrium will shift leftwards towards NO2.
Explanation:
Hello there!
In this case, according to the Le Cha telier's principle, it is possible to realize that the increase of the volume turns out in the shift towards the most of the gaseous moles are in; in such a way, for the given chemical reaction, we can notice how NO2 (reactant side) has the most of the moles (2 moles in comparison to 1 mole of N2O4); and therefore, by increasing the volume, the equilibrium will shift to it, it means leftwards.
Best regards!
Step 8: Measuring the Volume of Air Near 80°C
Use tongs to put the beaker (with tube and
thermometer) on the hot plate.
Temperature of gas: ___ C
Height of the column of gas: ___ cm
Answers
Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore, height of Column of gas is 7.4cm and temperature of Gas is 82°C or 355 K.
What is matter?Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.
Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.
So as we saw that matter has some mass so mass can be measured in gram only. Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. Height of Column of gas is 7.4cm and temperature of Gas is 82°Cor 355 K.
Therefore, height of Column of gas is 7.4cm and temperature of Gas is 82°C or 355 K.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ2
Answer:
Temperature of Gas: 83C Height of the column of gas: 7.4cm
Temperature of Gas: 355K Volume of Gas: 0.93cm^3
Explanation:
This was the answer that it gave me. I hope this helps. :)))
One liter of helium gas has a mass of 2.3 grams at STP. True or false
Answers
Answer:
n=V/Vm
n=1/22.4
n=0.044 moles He
m=n×M
m=0.044×4
m=0.178 g False
A chemist weighed out 7.22 g of silver. Calculate the number of moles of silver she weighed out.
Be sure your answer has the correct number of significant digits.
Answers
Answer:
0.067 mole Ag°
Explanation:
Given 7.22 g Ag° = 7.22g Ag/ 107.8g/mol = 0.0670 mole Ag° (3 sig. figs.)
Which type of formula shows an element symbol for each atom and a line for each bond between atoms?
structural
molecular
empirical
ionic
Answers
Answer: structural
Explanation:
When metals and non metals combine in fixed proportion then a chemical compound is formed. Structural formula shows an element symbol for each atom and a line for each bond between atoms. The correct option is option A.
What is chemical formula?Chemical formula is a formula where cation and anion combine to form a molecule in fixed proportion. Metals combine in form of cation and non metals combine in form of anion.
Cation is the species that give electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral.
Out of given structural is a 3D representation of any chemical formula, in which symbol of each element is shown .Along with symbol line for each bond between atoms is also shown.
Therefore, the correct option is option A.
To learn more about Chemical formula, here:
https://brainly.com/question/28522480
#SPJ2
Why is it expensive to bring electricity into urban areas?
Answers
Answer:
Power plants are not located in cities. Power has to travel a long distance over power lines to reach cities.
Explanation:
is pyramidal molecular geometry?
A. N2
B. H2O
C. NH3
D. CCL4
Answers
Answer:
[tex]\color{Blue}\huge\boxed{Question} [/tex]
Is pyramidal molecular geometry?[tex]\color{Blue}\huge\boxed{Answer} [/tex]
B.H2Ogoodluck please let me know if i’m wrong
Quinine in a 1.664-g antimalarial tablet was dissolved in sufficient 0.10 M to give 500 mL of solution. A 15.00-mL aliquot was then diluted to 100.0 mL with the acid. The fluorescence intensity for the diluted sample at 347.5 nm provided a reading of 327 on an arbitrary scale. A standard 100 ppm quinine solution registered 180 when measured under conditions identical to those for the diluted sample. Calculate the mass of quinine in milligrams in the tablet.
Answers
Answer:
605.6mg of quinine
Explanation:
Based on Lambert-Beer's law, the intensity of an optical measurement is directely proportional to its concentration.
Unknown concentration gives a reading of 327
100 ppm gives 180 of intensity
The concentration of the diluted quinine tablet is:
327 * (100ppm / 180) = 181.67 ppm. The final dilution
The concentration of the first diluted solution is:
181.67 ppm * (100.0mL / 15mL) = 1211ppm
ppm could be defined as mass of solute (In this case of quinine) in mg per liter of solution. That is:
1211mg / L
As the tablet was diluted to 500mL = 0.5L, the mass of the quinine is:
0.5L * (1211mg / L) =
605.6mg of quinine
What is the molarity (M) of a solution that has 0.50 moles of solute dissolved in 1.0
liter of solution?
Answers
Answer:
it is 0.50=0.5 M
Explanation:
Molarity definition is measure the concentration of solution.
and the rule is
molarity(M)= moles of solute/volume of solution in liters
Ex: 2.1 M MgCl2= 2.1 mole MgCl2/ L MgCl2 solution
3 attempts left
Check my work
Enter your answer in the provided box.
The pressure inside a 1.0 L balloon at 25°C was 750 mm Hg. What is the pressure (in mmHg) inside the
balloon when it is cooled to -65°C and expands to 3.3 L in volume?
mm Hg
Answers
Answer:
shhsss×<×>×××<××××
Explanation:
4×738×8<#329×
SO2 + PCL5 → SOCL2 + POCL3
What mass of SOCL2 is produced when 1.35 g SO2 react with 2.75 g PCL5
Answers
Answer:
2.34
Explanation:
How are compositional layers distinguished?
Answers
Explanation:
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layers
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition Depth
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicatesCore: The innermost layers of the Earth. The Earth has an outer core (liquid) and an inner core (solid). They are not chemically distinct from each other, but they are chemically distinct from the mantle. The core is mainly composed of nickel and iron. 2900-6370km meta
Due today please answer! Can we better understand plastics by using Periodic Table?
Answers
Answer is in a photo. I can only upload it to a file hosting service. link below!
bit.[tex]^{}[/tex]ly/3a8Nt8n
Answer:
I think not
Explanation:
Plastics can be understand through the knowledge of its types and structure than periodic table.
PLEASE HELP WILL MARK BRAINLEST!!!
Answers
Answer:
C. i don't kow
Explanation:
When 3.52 g of bismuth oxide (molar mass - 465.96 g/ml) reacts with excess carbon to form 2.91 g of bismuth metal (molar mass-208.98) according to the equation:
Bi2O3(s) + 3C(s) = 2 Bi(s) + 3 CO(g)
24
What is the percent yield of the reaction?
(Answer to 1 decimal place)
25
Answers
A compound with an approximate molar mass of
65.0g/mol is made up of C, H and Cl. This same
Compound contains 55% of Cl by mass .lf 9g
of the compound contains 4.19 x 10²³ atoms,
determine the compound's:
a empirical formular and molecular formular
Answers
Today, there are ____ GMO crops currently produced in the US.
A. 120
B. 10
C. 55
D. 1000
Answers
Answer: I think that is 55
Explanation: I hope I help
The combustion of coal, a fossil fuel, to produce electrical energy produces a by-product, sulfur dioxide, which is emitted into the atmosphere. Sulfur dioxide will mix with the components in the atmosphere to produce _____.
Forest Fires
Global warming
Acid Rain
Algae growing in ponds and lakes
Answers
difference between vegetative and reproductive part
Answers
Answer:
The vegetative parts includes the roots, stems,leaves and the reproductive parts include flowers. ... The vegetative parts can reproduce new plants by the process of vegetative propagation but the reproductive parts cannot produce new plants directly instead they produce precursor of new plants that are seeds or fruits.
The atomic musses of N (99. 64 percent) and 1N (0.36 percent) are 14.00307 amu and 15.0001 amu, respectively. Calculate the average atomic mass of nitrogen. The percentages in parentheses denote the relative abundances C01?
Answers
Answer:
14.01 amu
Explanation:
Step 1: Given data
Isotope Atomic mass (am) Abundance (ab)
¹⁴N 14.00307 amu 99.64% (0.9964)
¹⁵N 15.0001 amu 0.36% (0.0036)
Step 2: Calculate the average atomic mass (aam) of nitrogen
We will use the following expression.
aam = ∑ am × ab
aam = 14.00307 amu × 0.9964 + 15.0001 amu × 0.0036 = 14.01 amu
how many grams of Na2SO4, (molar mass =142.0 g/mol) are there in 15 mL of 0.50 m Na2SO4 solution?
Answers
Answer:
1.1 g Na2SO4
Explanation:
First convert mL to L. Then multiply by the Molarity to get moles, then multiply by the molar mass to get grams.
15 mL x 1 L x 0.50 mol Na2SO4 x 142 g = 1.1 g
10^3 mL 1 L mol Na2SO4
In a formula unit, there are 48 gram of Na2SO4 atoms of each element. In terms of molar mass (gram mass unit): 45.98 g Na2SO4 in total 142.04 g sodium sulphate
How many moles of Na2SO4 are there?A mole of sodium sulphate is created when two moles of sodium (45.98 g), one mole of sulphur (32.06 g), and four moles of oxygen (64.00 g) are combined (142.04 g).
The atomic mass of sodium sulphite is equal to 10 moles times the molecular mass, or 1260 grams. Consequently, 1260 grams are the mass of 10 moles of sodium sulphite (Na2SO4).
We first obtain the atomic weights of the different elements in a periodic table in order to compute the molar mass of a molecule. Then, we multiply the total number of atoms by each one's atomic mass. Finally, we calculate the molar mass by combining all the atomic masses.
To learn more about Na2SO4 refer to:
https://brainly.com/question/3047839
#SPJ2
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place
over the next few minutes?
Molecules in both the metal and the surrounding air will start moving at lower speeds.
Molecules in both the metal and the surrounding air will start moving at higher speeds.
The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up.
The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answers
Answer:
molecules will speed up
Explanation:
A 0.530 M Ca(OH)2 solution was prepared by dissolving 36.0 grams of Ca(OH)2 in enough water. What is the total volume of the solution thus formed? (4 points)
Answers
Answer:
0.917 L
Explanation:
Step 1: Given data
Molar concentration of the solution (M): 0.530 M (0.530 mol/L)Mass of Ca(OH)₂ (solute): 36.0 gStep 2: Calculate the moles corresponding to 36.0 g of Ca(OH)₂
The molar mass of Ca(OH)₂ is 74.09 g/mol.
36.0 g × 1 mol/74.09 g = 0.486 mol
Step 3: Calculate the volume of the solution
Molarity is equal to the moles of solute divided by the liters of solution.
M = moles of solute / liters of solution
liters of solution = moles of solute / M
liters of solution = 0.486 mol / (0.530 mol/L) = 0.917 L
Answer:
0.917 liters
Hope this helps! :D
Explanation:
5.
(08.02 MC)
A 0.530 M Ca(OH)2 solution was prepared by dissolving 36.0 grams of Ca(OH)2 in enough water. What is the total volume of the solution thus formed? (4 points)
2. Water is an excellent solvent. With water being a polar
molecule, it can be an especially strong solvent for other
polar molecules. Give an example of how water acting as a
solvent is important for living organisms.
NO LINKS PLZ HELP
Answers
Answer:
Water acts as a solvent of carbon dioxide excreted from tissues, in blood and helps in regulating pH (because it forms carbonic acid that lowers pH when it tends to get higher). Blood pH should be maintained at about 7.4. One major reason is that the structure of protein is dependent ton pH because pH determines its ionization hence also affecting the charges and interaction between side groups of amino acids. A change in pH may, therefore, denature proteins and negatively affect cellular functions.
Explanation:
To get more on how water acts as a universal solvent check out brainly.com/question/7007192
can someone help me???
Answers
Answer:
Waning Crescent
Explanation:
Hope iT Help
Brainliest please
What does the esophagus connect?
the intestine to the colon
the intestine to the mouth
The stomach to the intestine
the mouth to the stomach
Answers
Answer: it think it would be last one. the mouth to the stomach is the answer.
Explanation:
Answer:
The correct answer is D! The esophagus connects the mouth to the stomach.
Explanation:
The mouth is connected to the esophagus, which in turn is connected to the throat. The throat, in turn, connects the mouth to the stomach.
I had this on a science test and I got it right :D
I hope this helps! ;)
It’s due in 3 minutes please help
Answers
Answer:
The Answer is gonna be Indroduction of non-native plant species