What causes red blood cells to become sickle-shaped in a person with sickle
cell anemia?
A. Inheriting a specific gene
B. Eating a diet lacking a specific vitamin
C. Breathing in a specific pathogen
D. Touching a specific plant toxin

Explanation:

Hydrogen is collected by downward displacement of water as it is less denser than water. Hence it comes out at the surface of water . It is insoluble in water so it does not dissolve in water. ... So, it is impossible to collect hydrogen gas in air medium.22-O

Answer:

Yes you can use alligation for a type of liquid. Explanation: Alligation is an old and practical method of solving arithmetic problems related to mixtures of ingredients.

Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Thus, we can use allegation for any type of liquid.

What is matter?

Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.

Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.

Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. Allegation is a form of liquid that we may utilize. Allegation is a time-tested and useful strategy for tackling mathematical issues involving combinations of elements.

Thus, we can use allegation for any type of liquid.

To learn more about matter, here:

https://brainly.com/question/4562319

#SPJ2

Answer:

1.2375 ton of ore

Explanation:

Mass of indium = 325

Formula = In2O3

Molar mass = 277.64 g/mol

Molar mass of indium = (2*114.8)g

229.6 indium is in 277.64 of In2O3

Mass of In2O3 required = 277.64/229.6 x 325

= 392.94kg

35 % In2O3 in ore

For 35 kg = 100 kg required

For 392.94,

100/35 x 392.94

= 1122.686 kg

1122.68 x 2.2

= 2469.9 pounds

2469.9/200

= 1.235 tons of ore

Answer:

NH3

Explanation:

The "tri" attached to the trihydride means 3. So your hydrogen is going to have 3 atoms.

Answer:

All Answers only for the elite; Nomenclature of Covalent Compounds Quiz

You're Welcome :)

Explanation:

A-hydrochloric acid

B-sulfuric acid

C-dinitrogen pentoxide

C- IBr3

A- carbon dioxide

B- Start the name with hydro-.

B- H3BO3

C-sulfur trioxide

A- NH3

B- The chemical name ends with “hydroxide.”

Answer:

a nonpolar covalent

b polar

c nonpolar

d ionic

e. polar

f. ionic

g polar

h polar

Explanation:

Answer:

Explanation:

Atmosphere - the envolpoe of gasses sourounding the earth or another planet or the air in any particular place. The atmosphere protects us from the suns harmful rays, carrys cloud full of water so it can rain all over the world, and have oxygen, which is nessecary for survival to all living things.

Answer:

Explanation:

Solid ice floats over water because ice is less dense than liquid water, or weighs less, by about 10%, than liquid water

Answer:

a. Endothermic

b. 26.37kJ/mol

Explanation:

a. As we can see, the temperature of the water is decreasing when the reaction is occurring, that means the reaction is absorbing heat and is endothermic

b. To find the enthalpy we must find the change in heat when 12.1g of KCl are dissolved. Using the equation:

Q = -m*ΔT*C

Where Q is change in heat

m the mass of solution (250g + 12.1g = 262.1g)

ΔT is change in heat (17.1°C - 21.0°C = -3.9°C)

And C is specific heat of the solution (4.184J/g°C assuming is the same than the specific heat of water).

Replacing:

Q = -262.1g*-3.9°C*4.184J/g°C

Q = 4277J = 4.28kJ

As reaction enthalpy is the change in heat per mole of reaction, we must find the moles of 12.1g of KCl:

Moles KCl -Molar mass: 74.55g/mol-:

12.1g KCl * (1 mol / 74.55g) = 0.1623 moles KCl

The reaction enthalpy us:

4.28kJ / 0.1623mol = }

Answer:

number 2

Explanation:

even though i have never done this i still got it right

Because metals do not form covalent bonds, when naming covalent bonds, all the given rules apply except write the metal first; option 4.

Covalent bonds are bonds formed by the sharing of valence electrons between the atoms involved in the bonding.

In naming covalent bonds, the following rules are applied:

For example, CO₂, is carbon dioxide.

Therefore, when naming covalent bonds, all the given rules apply except write the metal first because metals do not form covalent bonds.

Learn more about covalent bonds at: https://brainly.com/question/12407985

ANSWER:

Nonpolar

sorry if I'm wrong

Answer:

plants can be used as fuel because plants can be burned so they compose the plants to make a liquid

Answer:

its either C or D my guess is C though because 35.0g of hyddrogen is =1.03 mol

Explanation:

Answer:

the flux of sucrose is 9.072 × 10⁻⁷  kg sucrose / m² sec

Explanation:

Given the data in the question;

water-gelatin solution separating two different concentration solutions of sucrose; 5.1 wt % gelatin at 293 K; at this conditions diffusivity of sucrose in water gelatin solution is;

[tex]D_{AB}[/tex] =  0.252 × 10⁻⁹ m²/sec.

we know that; 1 L = 0.001 m³, 1mL = 0.001 L

[tex]C_{A1}[/tex] = 2.0 g sucrose/100 mL = 2.0 × 10⁻³ kg sucrose / 100 × 10 ⁻³ L

[tex]C_{A1}[/tex]  = 2.0kg sucrose / 100 L

[tex]C_{A1}[/tex] = 2.0 kg sucrose / 100 × 10⁻³ m³

[tex]C_{A1}[/tex]  =  20 kg sucrose / m³

[tex]C_{A2}[/tex] =  0.2 g sucrose/100 mL = 0.2 × 10⁻³ kg sucrose / 100 × 10⁻³ × 10⁻³ L

[tex]C_{A2}[/tex] = 2 kg sucrose / m³

Thickness ß = 5 mm = 5 × 10⁻³ m

Now, flux of sucrose in kg sucrose / m³sec will be;

using the formula, [tex]N_{A}[/tex] = [tex]D_{AB}[/tex] /ß ( [tex]C_{A1}[/tex] - [tex]C_{A2}[/tex] )

we substitute

[tex]N_{A}[/tex] = (0.252 × 10⁻⁹ m²/sec /  5 × 10⁻³ m) ( 20 kg sucrose / m³ - 2 kg sucrose / m³ )

[tex]N_{A}[/tex] = (0.252 × 10⁻⁶ / 5) × 18 kg sucrose / m² sec

[tex]N_{A}[/tex]  = 4.536 ×  10⁻⁶  / 5 kg sucrose / m² sec

[tex]N_{A}[/tex] = 9.072 × 10⁻⁷  kg sucrose / m² sec

Therefore, the flux of sucrose is 9.072 × 10⁻⁷  kg sucrose / m² sec

Answer:

D i took it aswell

Explanation:

The energy the molecules must have in order to react. Hence, option D is correct.

Activation energy is the sufficient amount of energy necessary to initiate a chemical reaction.

It can also be said as the minimum amount of energy needed to energize molecules or atoms so that they can undergo a chemical reaction or transformation.

Hence, the energy the molecules must have in order to react.

Learn more about activation energy here:

brainly.com/question/2410158

#SPJ5

Answer:

The answer is A.Newton's First law

Answer:

it's A. The water in the pond reflects light from the Sun, making a mirror image

Explanation:

i just took the test

Answer:

Exothermic Reaction

Explanation:

Burning wood in air is an exothermic process (it releases heat), but there is an energy barrier, so it requires a bit of heat in the beginning to get the reactions started.

Wood reacts with oxygen in the air to form (mostly) carbon dioxide and water vapor. The process involves many different individual chemical reactions, and it requires some energy to initiate the reactions. This is because it's usually necessary to break some chemical bonds (endothermic) before new stronger bonds can be formed (exothermic). Overall, though, more heat is released in forming the final products than is consumed in starting new reactions.

Have a great day <3

In the given question, a burning log is an exothermic event if the log is the system.

An exothermic reaction releases energy to the surroundings, usually in the form of heat. The change in enthalpy is negative.

When a log burns, it reacts with oxygen in the air to produce carbon dioxide, water vapor, and heat. This heat is released to the surroundings, making the burning log an exothermic event.

Therefore, a burning log is an exothermic event if the log is the system. This is due to the fact that the reaction emits heat into the environment, making it an exothermic reaction.

Learn more about exothermic reaction here:

https://brainly.com/question/28546817

#SPJ6

Answer:

Limiting reactant: Cl2.

Max mass of PCl3 = 41.44 g.

P4 leftover = 5.51 g.

Explanation:

Hello!

In this case, since the undergoing chemical reaction is:

[tex]P_4+6Cl_2\rightarrow 4PCl_3[/tex]

In order to compute the maximum amount of PCl3, it is necessary to compute the grams of this product produced by each reactant, just as shown below, whereas molar masses and mole ratios are used:

[tex]m_{PCl_3}^{by\ P_4}=14.3gP_4*\frac{1molP_4}{123.89gP_4} *\frac{4molPCl_3}{1molP_4} *\frac{137.33gPCl_3}{1molPCl_3} =63.41gPCl_3\\\\m_{PCl_3}^{by\ Cl_2}=32.1gCl_2*\frac{1molCl_2}{70.91gCl_2} *\frac{4molPCl_3}{6molCl_2} *\frac{137.33gPCl_3}{1molPCl_3} =41.44gPCl_3[/tex]

Thus, since chlorine gas yields fewer grams of PCl3 than P4 we infer Cl2 is the limiting reactant and 63.41 grams of PCl3 product are yielded.

Finally, for the excess reactant, we see a difference of 63.41-41.44=21.97g, so we can compute of the leftover of P4 as follows:

[tex]m_{P_4}^{leftover}=21.97gPCl_3*\frac{1molPCl_3}{137gPCl_3} *\frac{1molP_4}{4molPCl_3} *\frac{137.33gP_4}{1molP_4} =5.5gP_4[/tex]

Best regards!

Answer:

[tex]V_2=120L[/tex]

Explanation:

Hello!

In this case, since Helium is undergoing a volume-pressure change, according the Boyle's law, we infer the following equation is used:

[tex]P_1V_1=P_2V_2[/tex]

Thus, since we are not given the volume at 0.25 atm, we can solve for V2 to do so:

[tex]V_2=\frac{P_1V_1}{P_2}[/tex]

Thus, we plug in to obtain:

[tex]V_2=\frac{1atm*30L}{0.25atm}=120L[/tex]

Best regards!

The final volume of the balloon at the given altitude is 120 L.

The given parameters;

The final volume of the balloon at the given altitude is calculated by applying Boyles law as follows;

[tex]P_1 V_1 = P_2 V_2\\\\V_2 = \frac{P_1V_1}{P_2} \\\\V_2 = \frac{30 \times 1 }{0.25} \\\\V_2 = 120 \ L[/tex]

Thus, the final volume of the balloon at the given altitude is 120 L.

Learn more here:https://brainly.com/question/1696010

Answer:

A DC power supply, commutator, rotor armature, axle, and a field magnet.

Answer:

all letter cannot be created or destroyed just transformed

Answer:

If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B

Explanation:

To know the the correct answer to the question, do the following:

Case 1: Let the circuit A and B have equal voltage say 24 V.

For Circuit A:

Voltage (V) = 24 V

Resistance (R) = 7.5 ohms

Current (I) =?

V = IR

24 = I × 7.5

Divide both side by 7.5

I = 24 / 7.5

I = 3.2 A

For Circuit B:

Voltage (V) = 24 V

Resistance (R) = 5 ohms

Current (I) =?

V = IR

24 = I × 5

Divide both side by 5

I = 24 / 5

I = 4.8 A

Thus for the same voltage, current in circuit A is less than the current in B.

Case 2: Let circuit A and B have equal current say 2 A

For circuit A:

Current (I) = 2 A

Resistance (R) = 7.5 ohms

Voltage (V) =?

V = IR

V = 2 × 7.5

V = 15 V

For Circuit B:

Current (I) = 2 A

Resistance (R) = 5 ohms

Voltage (V) =?

V = IR

V = 2 × 5

V = 10 V

Thus, for the same current, the voltage in circuit A is greater than the voltage in B

Case 3: Let circuit A have a current of 4 A and circuit B have a current of 5 A

For circuit A:

Current (I) = 4 A

Resistance (R) = 7.5 ohms

Voltage (V) =?

V = IR

V = 4 × 7.5

V = 30 V

For circuit B:

Current (I) = 5 A

Resistance (R) = 5 ohms

Voltage (V) =?

V = IR

V = 5 × 5

V = 25 V

Thus, when the current in circuit A is less than the current in circuit B, the voltage in circuit A is greater than the voltage in circuit B.

From the illustrations above and the options given in the question, the current answer is:

If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B

Answer:

8.8mol/l

Explanation:

but I'm not percent sure.

Answer:

The answer is air

Explanation:

This is from the web:

"The lithosphere is located below the atmosphere, which is the air that surrounds the planet, and above the asthenosphere."

Hope this helps and answers your question! Have a great day/night!

Answer:

Compound Formula. 1, Carbon dioxide, CO2. 2, Carbon monoxide, CO. 3, Diphosphorus pentoxide, P2O5. 4, Dinitrogen monoxide, N2O.

Explanation:

dont even know by thoAnswer:

Explanation:

Answer:

She's right that there's a difference, and you are right that it's all just electromagnetic waves!

The key to this is that there is no such thing as "white light" when you really get down to it. Each light emits a range of wavelengths of light. If they have a sufficiently even distribution of wavelengths, we tend to call that light "white," but we can only use that term informally.

Both the sun and the light bulb emit so-called "Blackbody radiation." This is the particular spectrum of light that's associated with the random thermal emissions of a hot object. Cool objects tend to emit more of their energy in the longer wavelengths like reds and IRs, while hotter objects emit more energy in the shorter wavelengths like blues and UV.

Blackbody graphic

(Note, there are other possible emission spectra, but those are associated with different materials doing the emissions and, for the purposes of this discussion, they aren't too important. We can just claim the emissions are all blackbody)

If you notice, as you get hotter, a larger portion of the energy is emitted in the blue, violet, and ultraviolet. That's how you get a sunburn from the sun. It's harder to get a sunburn from an artificial light, not because it's artificial, but because those lights are almost always cooler than the sun. They don't have as much UV content. Instead, they have more red and yellow, which incidentally is why pictures taken indoors look very yellow. If you use a strobe, however, all those yellow hues go away because a strobe light is very warm, with lots of blues.

You can get a sunburn from artificial light, of course. Tanning beds are the obvious example, but there are other interesting ones. When you're a jeweler working in platinum, for instance, you need to wear UV protective gear (like glasses or even sunscreen). Platinum's melting point is so hot that it actually emits quite a lot of UV light and can give you a sunburn!

Other than these spectra, there is nothing different between light from an artificial source and light from the sun. Photons are photons.

Explanation:

PLEASS MARK ME AS BRAINLIEST

#STAY SAFE