Answer:
TRUE
Explanation:
IM SMART
Answer:
Stay Safe! ,God bless you . The answer is false ,
Explanation:
In the figure, given ∆x=30cm, k=200N/cm, g=10m/s². Find the mass of the object
Answer:
600 Kg
Explanation:
From the question given above, the following data were obtained:
Extention (∆x) = 30 cm
Spring constant (K) = 200 N/cm Acceleration due to gravity (g) = 10 m/s²
Mass (m) of object =?
Next, we shall determine force exerted. This can be obtained as follow:
Extention (∆x) = 30 cm
Spring constant (K) = 200 N/cm
Force (F) =?
F = K∆x
F = 200 × 30
F = 6000 N
Finally, we shall determine the mass of the object. This can be obtained as follow:
Acceleration due to gravity (g) = 10 m/s²
Force (F) = 6000 N
Mass (m) of object =?
F = mg
6000 = m × 10
Divide both side by 10
m = 6000 / 10
m = 600 Kg
Thus, the mass of the object is 600 Kg
John runs 3 km north then walks 2 km south. What is his total distance traveled and displacement?
Answer:
the total distance is 5km and the displacement is 1km
Explanation:
The total distance would be the addition of John running both ways so 3 km, 2 km.
However since he only walked back from a distance of 3 km to 2 km, he would be displaced 1 km because displacement is more like the position from the original point.
Think about 2 km as a positive value for the first part of the question and a negative value for the second part.
On a slope where does a marble have to most kinetic energy?
a) it is always the same
b) at the initial position
c) at the final position
d) somewhere between the initial and the final position
Answer:
C
Explanation:
Kinetic energy is the energy of motion. It has the most potential energy at the top but the most kinetic at the bottom after it's accelerated fully down the slope.
discuss how devastating a 7.7 - magnitude earthquake is.
Answer:
Explanation:
It’s devastating because when a earthquake is 7.7 magnitude the
Kiara starts at 4, walks 6 blocks left and 2 blocks right. What is her displacement?
. Which of the statement below about the magnetic
properties of iron and steel is correct?
A. Both iron and steel are equally magnetized and
demagnetized
B. Iron is more easilymagnetized and demagnetized
than steel.
C. Steel is more easily magnetized and demagnetized
than iron
D. Iron is more easily magnetized than steel but steel is
more easily demagnetized than iron.
Answer:
D. Iron is more easily magnetized than steel but steel is more easily demagnetized than iron.
You perform nine (identical) measurements of the acceleration of gravity (units of m/s2): 10.1,9.87, 9.76, 9.91, 9.75, 9.88, 9.69, 9.83, and 9.90. The true value is 9.81. Calculate the standard error of your results to ONE significant digit.
Answer:
0.01
Explanation:
Given the data:
10.1,9.87, 9.76, 9.91, 9.75, 9.88, 9.69, 9.83, 9.90
True value = 9.81
Mean value :
Σx / n
Sample size, n = 9
(10.1 + 9.87 + 9.76 + 9.91 + 9.75 + 9.88 + 9.69 + 9.83 + 9.90) / 9
= 88.69 / 9
= 9.854
Standard deviation (σ) :
Sqrt (Σ(X - m)² / n)
[(10.1 - 9.854)^2 + (9.87 - 9.854)^2 + (9.76 - 9.854)^2 + (9.91 - 9.854)^2 + (9.75 - 9.854)^2 + (9.88 - 9.854)^2 + (9.69 - 9.854)^2 + (9.83 - 9.854)^2 + (9.90 - 9.854)^2] / 9
Sqrt(0.113824 / 9)
Sqrt(0.0126471)
σ = 0.1124593
Standard Error = σ / sqrt(n)
Standard Error = 0.1124593 / 9
Standard Error = 0.0124954
Standard Error = 0.01 ( 1 significant digit)
2) Given R = 3 ohms and R, = 1 ohm and V = 12 volts
I
a) Find the total resistance.
b) Find the current in the circuit:
c) Find the voltage drop in each resistor:
Answer:
a) because this is in series, we have:
the total resistance is 3 + 1 = 4 (ohm)
b) the curren in the circuit is 12/4 = 3 (A)
c) the voltage in R = 3 ohm is 3.3 = 9 (V)
the voltage in R = 1 ohm is 12 - 9 = 3 (V)
some waves can only travel through matter. What is this matter called?
Which of the following is a mood disorder?
phobic disorder
bipolar disorder
schizophrenia
conversion disorder
Answer:
bipolar disorder
Explanation:
bipolar disorder, is previously known as manic depression, is a mental disorder characterized by periods of depression and periods of abnormally elevated mood that last from days to weeks.
A diode for which the forward voltage drop is 0.7 V at 1.0 mA is operated at 0.5 V. What is the value of the current
Answer:
the current value is [tex]0.335 \mu A[/tex]
Explanation:
The computation of the value of the current is given below:
[tex]z_i = I_s e^{\frac{0.7}{ut} }= 10^{-3}\\\\Z_z = I_s e^{\frac{0.5}{ut} }\\\\\frac{Z_z}{Z_i}= \frac{Z_z}{10^{-3}} = e^{\frac{0.5\times 0.7}{0.025} }\\\\= 0.335 \mu A[/tex]
Hence, the current value is [tex]0.335 \mu A[/tex]
A 12-kg object is moving rightward with a constant velocity of 4 m/s. How much net force is required to keep the object moving with
the same speed and in the same direction?
Explain how momentum is determined and conserved.
ASAP!!
Explanation:
Momentum is conserved in the collision. Momentum is conserved for any interaction between two objects occurring in an isolated system.
If an atom of oxygen has an atomic number of eight that means...…
E. there are 8 protons
F. there are 8 neutrons
G. it weighs 8 amu
H. it is in group 8
an airplane normally flying at 80 km/h north encounters a wind from the west of 10km/h at right angle to its foward motion a crosswind what will its resultant velocity be ?
Answer:
v = 80.62 km/h
Explanation:
Given that,
An airplane normally flying at 80 km/h north encounters a wind from the west of 10km/h at right angle to its forward motion a crosswind.
We need to find the resultant velocity of the airplane. It can be calculated as follows :
[tex]v=\sqrt{80^2+10^2} \\\\v=80.62\ km/h[/tex]
So, the required velocity is 80.62 km/h.
The force of gravity acting on an object is directed through this
center of gravity and toward the center of the
Answer:
Earth.
Explanation:
Center of gravity can be defined as the specific point where all of the weight of an object is concentrated.
Generally, all the objects found around the world all have a center of gravity.
When an object is balanced so that a displacement lowers its center of gravity, the object is said to be in stable equilibrium.
Hence, the force of gravity acting on an object is directed through this center of gravity and toward the center of the earth.
Weight can be defined as the force acting on a body or an object as a result of gravity.
Mathematically, weight is given by the formula;
[tex] Weight, W = mg [/tex]
Where;
m is the mass of an object.
g is acceleration due to gravity.
I need this done by tonight!! Can anyone help me please? Answer these 4 questions
Answer:
1. 14 g of chocolate mixture.
2. 24 fl oz of chocolate milk
3. 10 cups of chocolate milk.
4. 12½ cups.
Explanation:
From the question given above, the following data were obtained:
1 TBSP = 7 g
1 Cup = 8 fl oz
2 Table spoons (TBSP) for 1 cup (8 fl oz) of milk.
1. Determination of the mass of chocolate mixture in 1 cup of chocolate milk.
From the question given above,
1 Cup required 2 Table spoons (TBSP)
But
1 TBSP = 7 g
Therefore,
2 TBSP = 2 × 7 = 14 g
Thus, 1 Cup required 14 g of chocolate mixture.
2. Determination of the number fl oz of chocolate milk in 3 cups
1 Cup = 8 fl oz
Therefore,
3 Cups = 3 × 8
3 Cups = 24 fl oz
Thus, 24 fl oz of chocolate milk are in 3 cups.
3. Determination of the number of cups of chocolate milk produce from 20 TBSP.
2 TBSP is required to produce 1 cup.
Therefore,
20 TBSP will produce = 20/2 = 10 Cups.
Thus, 10 cups of chocolate milk produce from 20 TBSP.
4. Determination of the number of cups obtained from 100 fl oz chocolate milk.
8 fl oz is required to produce 1 cup.
Therefore,
100 fl oz will produce = 100 / 8 = 12½ cups.
Thus, 12½ cups is obtained from 100 fl oz chocolate milk.
Which action will leave the dump trucks inertia unchanged?? PLEASE ANSWER FAST!!!
A. add gas
B. increase force applied to engine
Answer:
B.
Explanation:
What relationship must exist between an applied force and the velocity of a moving object if uniform circular motion is to result?
Answer:
See explanation
Explanation:
Centripetal force is defined as the inward force required to keep an object moving with a constant speed in a circular path.
The magnitude of this force depends on the mass of the object, radius of the object and the velocity of the body.
So we can write;
F = mv^2/r
explain resolution of Force
Answer:
it is defined as splitting up the given force into a number of components, without changing its effects on the body is called resolution of forces. A force is generally resolved along with two mutually perpendicular directions.
Explanation:
The driver of a car wishes to pass a truck that is traveling at a constant speed of 19.0 m/s. Initially, the car is also traveling at a speed 19.0 m/s and its front bumper is a distance 23.1 m behind the truck's rear bumper. The car begins accelerating at a constant acceleration 0.570 m/s^2, then pulls back into the truck's lane when the rear of the car is a distance 25.0 m ahead of the front of the truck. The car is of length 5.00 m and the truck is of length 21.3 m.
1. How much time is required for the car to pass the truck?
2. What distance does the car travel during this time?
3. What is the final speed of the car?
Answer:
16.16 s
381.5 m
28.21 m/s
Explanation:
Acceleration of the car = [tex]0.57\ \text{m/s}^2[/tex]
The distance the car moves is [tex]23.1+25+21.3+5=74.4\ \text{m}[/tex]
Initial position of the car is [tex]23.1+21.3+5=49.4\ \text{m}[/tex]
Position of the truck is given by the equation
[tex]x_r(t)=49.4+19t[/tex]
Position of the car is given by the equation
[tex]x_c(t)=19t+\dfrac{1}{2}\times0.57t^2[/tex]
Difference in their positions is 25 m
[tex]x_c(t)-x_r(t)=25\\\Rightarrow 19t+\dfrac{1}{2}\times0.57t^2-(49.4+19t)=25\\\Rightarrow 0.285t^2-74.4=0\\\Rightarrow t=\sqrt{\dfrac{74.4}{0.285}}\\\Rightarrow t=16.16\ \text{s}[/tex]
Time required for the car to pass the truck is 16.16 s
[tex]x_c(16.16)=19\times 16.16+\dfrac{1}{2}\times0.57\times 16.16^2=381.5\ \text{m}[/tex]
The distance the car traveled during this time is 381.5 m
[tex]v_c(16.16)=19+0.57\times 16.16=28.21\ \text{m}[/tex]
The final speed of the car is 28.21 m/s
Assuming no friction, how does the initial gravitational potential energy of
the marble on a downward slope compare to the final kinetic energy?
a) they are the same
b) the initial gravitational potential energy is greater than the final kinetic energy
c) the initial gravitational potential energy is less then the final kinetic energy
Answer:
a) They are the same.
Explanation:
Assuming no friction, there should be no energy transfer and thus the Law of Conservation of Energy says:
[tex]PE=KE,\\mgh=\frac{1}{2}mv^2[/tex]
These types of problems also disregard any air resistance the surface of the object may cause. Therefore, no energy is transferred and from the Law of Conservation of Energy, [tex]100\%[/tex] of energy is preserved.
Q1. A man wants to install a surveillance mirror in his shop, which mirror should he use?(1)
a) Convex mirror
b) Concave mirror
c) Plane mirror
d) Both (a) and (b)
answer is convex mirror
Explanation:
A
Because convex mirror will provide maximum view
Small household electrical devices, such as vacuum cleaners, televisions, and floor lamps, each draw a different amount of current, but all require 120 volts to operate. Are the outlets in of a power-strip, then, wired in series or parallel
Answer:
the selected configuration is PARALLEL
Explanation:
There are two ways to connect electrical circuits.
In series in this type of circuit the equipment is connected to the same line, in this case the current of the circuit circulates through all the inputs is the same, but the voltage in each one is a part of the total voltage, this circuit has the problem that if an appliance is disconnected or damages the power and the entire circuit is interrupted
V_total = ∑ V_i
In a parallel circuit the equipment is connected in two two cables, for which the current is divided in each branch, the voltage in all the branches is the same, this type of circuit has the advantage that if one equipment is damaged or disconnects the others they can continue working
V_total = V
Therefore, in consequence of the above, the selected configuration is PARALLEL
A person weighs 60kg. Calculate the amount of work done if he is raised 12m into the air.
Answer: I belive the answer would be 720 Joules
Explanation:
Work can be calculated by multiplying an objects weight times the distance traveled. Work is measured in joules (J).
Formula: W x D = J
W= weight
D= Distance
J= joules of energy
Hope it helps
what are ribosomes?
I'm tired. But I have insomnia. Big ugh moment. <.<.
Answer:
Ribosomes are organelles the make protein for the cell.
When you use an array to implement the ADT list, retrieving an entry at a given position is slow.
a) true
b) false
When you use an array to implement the ADT list, adding an entry at a the end of the list is fast.
a) true
b) false
When you use a vector to implement the ADT list, retrieving an entry at a given position is slow.
a) true
b) false
When you use a vector to implement the ADT list, adding an entry at a the end of the list is fast.
a) true
b) false
Answer:
1)FALSE
2)TRUE
3)FALSE
4) FALSE
Explanation:
1) Retrieving an entry at a given position is not slow ( it is done using index number ) hence the answer is FALSE
2) Adding an entry at the end of the list is Fast this is because in using array implementation a new entry is made immediately after the last position and it is done very fast as well. hence the answer is TRUE
3) Retrieving an entry at a given position ( from an ADT list ) that is been implemented using Vector is very fast this is simply because Indexing in vector is done at a fixed time hence the answer is FALSE
4) Adding an entry at the end of the list is slow using vector hence answer is FALSE
Heather drives her Super-Beetle around a turn on a circular track which has a radius of 200 m. The Super-Beetle has a mass of 1500 kg and the coefficient of static friction between the road and tires is 0.6.
a. What is the force of static friction the road can apply batore the car starts to selon (use Ft= uFn).
b. What is the maximum speed the car can travel before it would start to slide?
Answer:
a) The force of static friction the road can apply before the car starts to move is 8826.3 newtons.
b) The maximum speed that a car can travel before it would start to slide is approximately 34.305 meters per second.
Explanation:
a) Let suppose that the car is on a horizontal ground and travels at constant speed. The vehicle experiments a centripetal acceleration due to friction, which can be seen in the Free Body Diagram (please see image attached for further details). By Newton's Laws, we construct the following equations of equilibrium:
[tex]\Sigma F_{x} = \mu_{s}\cdot N = m\cdot \frac{v^{2}}{R}[/tex] (1)
[tex]\Sigma F_{y} = N -m\cdot g = 0[/tex] (2)
Where:
[tex]\mu_{s}[/tex] - Static coefficient of friction, dimensionless.
[tex]N[/tex] - Normal force from ground to the car, measured in newtons.
[tex]v[/tex] - Maximum speed of the car, measured in meters per second.
[tex]R[/tex] - Radius of the circular track, measured in meters.
[tex]m[/tex] - Mass, measured in kilograms.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
By applying (2) in (1):
[tex]\mu_{s}\cdot m\cdot g = m\cdot \frac{v^{2}}{R}[/tex] (3)
The force of static friction the road can apply in the car ([tex]f[/tex]), measured in newtons, is: ([tex]\mu_{s} = 0.6[/tex], [tex]m = 1500\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex])
[tex]f = \mu_{s}\cdot m \cdot g[/tex]
[tex]f = (0.6)\cdot (1500\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)[/tex]
[tex]f = 8826.3\,N[/tex]
The force of static friction the road can apply before the car starts to move is 8826.3 newtons.
b) Then, we calculate the maximum speed of the car by (3):
[tex]\mu_{s}\cdot m\cdot g = m\cdot \frac{v^{2}}{R}[/tex]
[tex]\mu_{s}\cdot g = \frac{v^{2}}{R}[/tex]
[tex]v = \sqrt{\mu_{s}\cdot g\cdot R}[/tex]
If we know that [tex]\mu_{s} = 0.6[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]R = 200\,m[/tex], then the maximum speed of the car can travel before it would start to slide is:
[tex]v =\sqrt{(0.6)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (200\,m)}[/tex]
[tex]v \approx 34.305\,\frac{m}{s}[/tex]
The maximum speed that a car can travel before it would start to slide is approximately 34.305 meters per second.
A block of mass m = 4.4 kg slides from left to right across a frictionless surface with a speed vi= 8.4 m/s It collides in a perfectly elastic collision with a second block of mass M that is at rest. After the collision, the 4.4-kg block reverses direction, and its new speed is 2.5 m/s What is V, the speed of the second block after the collision?
Answer:
[tex]v_{2'}=8.1\:\mathrm{m/s}[/tex]
Explanation:
In a perfectly elastic collision, the total kinetic energy of the system is maintained. Therefore, we can set up the following equation:
[tex]\frac{1}{2}m_1{v_1}^2+\frac{1}{2}m_2{v_2}^2=\frac{1}{2}m_1{v_{1'}}^2+\frac{1}{2}m_2{v_{2'}}^2[/tex]
Since the second block was initially at rest, [tex]\frac{1}{2}m_2{v_2}^2=0[/tex].
Plugging in all given values, we have:
[tex]\frac{1}{2}m_1{v_1}^2=\frac{1}{2}m_1{v_{1'}}^2+\frac{1}{2}m_2{v_{2'}}^2,\\\\\frac{1}{2}\cdot4.4\cdot8.4^2=\frac{1}{2}\cdot 4.4 \cdot (-2.5)^2+\frac{1}{2}\cdot 4.4\cdot {v_{2'}}^2,\\\\{v_{2'}}=\sqrt{64.31},\\\\{v_{2'}}\approx\fbox{$8.1\:\mathrm{m/s}$}[/tex]..
What is the gravitational force between two students, John and Mike, if John has a mass of 81.0 kg, Mike has a mass of 93.0 kg, and their centers are separated by a distance of .620 m?
Answer:
1.31×10¯⁶ N
Explanation:
From the question given above, the following data were obtained:
Mass of John (M₁) = 81 Kg
Mass of Mike (M₂) = 93 Kg
Distance apart (r) = 0.620 m
Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²
Force (F) =?
The gravitational force between the two students, John and Mike, can be obtained as follow:
F = GM₁M₂ / r²
F = 6.67×10¯¹¹ × 81 × 93 / 0.62²
F = 6.67×10¯¹¹ × 7533 / 0.3844
F = 1.31×10¯⁶ N
Therefore, the gravitational force between the two students, John and Mike, is 1.31×10¯⁶ N