Take a beaker (jar or jug) with some water and put some drops of red or blue ink in it.Take a tender twig of any flowery plant with leaves and flowers ,preferably white flowers,and put it in the beaker for 6 to 8 hours. What do you observe?For further examination cut across its stem and look for the presence of coloured water.Explain your observations.

Answer:

58.3%

Explanation:

The formula of the compound is given as:

     CsPO₄  

Now, the percentage composition of Cs in the compound is = ?

So;

To find this parameter, find the molar mass of the compound:

  Molar mass of  CsPO₄   = 132.9 + 31 + 4(16)  = 227.9g/mol

Percentage composition of Cs= [tex]\frac{132.9}{227.9} x 100[/tex]   = 58.3%

Answer:

Mass = 14.025 g

Explanation:

Given data:

Mass of Ca burn = 10 g

Mass of calcium oxide produced = ?

Solution:

Chemical equation:

2Ca + O₂     →    2CaO

Number of moles of Ca:

Number of moles = mass /molar mass

Number of moles = 10 g/ 40 g/mol

Number of moles = 0.25 mol

now we will compare the moles of Ca and CaO

               Ca            :             CaO

                 2             :              2

               0.25          :            0.25

Mass of CaO;

Mass = number of moles × molar mass

Mass = 0.25 mol × 56.1 g/mol

Mass = 14.025 g

Answer:

Strong acids contain more A− than weak acids do.

Strong acids contain more H3O+ than weak acids do

Explanation:

When we talk about a strong acid, we are referring to any acid that is completely dissociated or ionized when it is in an aqueous solution.

It is very eager to lose a proton, H+ in solution according Arrhenius definition.

In aqueous solution, a strong acid ionizes as follows:

HA(aq) + H2O → H3O+(aq) + A−(aq)

Since, strong acids ionize completely in solution, strong acids contain a greater H3O+ and A− concentration than solutions of weak acids.

Answer:

A. Strong acids contain more A− than weak acids do.

B. Strong acids contain more H3O+ than weak acids do.

D. Strong acids contain more OH− than weak acids do.

Explanation:

Plato correct

a. t = 4.33 s

b. R = 53.04 m

c. H = 22.97 m

Given

vo=initial velocity=24.5 m/s

Angle = θ = 60°

Required

(a) time of flight, (b) range, and (c) maximum height.

Solution

Parabolic motion

a. time to flight

t = (2vo sin θ) / g

t = (2 x 24.5 x sin 60) / 9.8

t = 4.33 s

b. range (horizontal range) :

R = (vo² sin2θ )/g

R =(24.5² sin 120)/9.8

R = 53.04 m

c. maximum height

H = (vo²sin²θ)/2g

H = (24.5²sin²60)/2.9.8

H = 22.97 m

Answer:

When an electric current is passed through a gas, the gas emits light. Neon signs operate in this way; a tube having an electrode at each end is filled with a gas at low pressure and a high voltage (generally in the range of 1000 to 5000 volts) is applied to the electrodes.

Explanation:

Answer:

N2 has a triple bond with its Lewis structure. Nitrogen has 5 valence electrons. Two nitrogen's have a total of 10 valence electrons. There will be 6 valence electrons that are unequally shared. We move them in the middle. Therefore, Each nitrogen gives three pairs of electrons to the to the other nitrogen atom.  N2 has a total of 8 electrons which completes the octet rule.

Explanation:

Hope it helped!

Answer:

Dr. Tierno tested the pillows for signs of microorganisms. He took samples from the pillow, then he grew the microorganisms in a petri dish.

Explanation:

This is the answer on edmentum

The following that is not a way to measure a race car's motion is its velocity. The correct option is b.

Motion is a phenomenon that changes the position of an object with respect to time. The motion needs a force to change the position, and motion needs some energy that can be potential energy or a force.

Velocity is the speed of any object that is in motion in a particular direction. It tells the rate of change of motion of an object. It is a scalar quantity.

Motion is the result of force. Force can be measured by multiplying the mass by acceleration.  So the variables that would be needed to calculate a race car's motion will be acceleration and the mass of the car, and the resistances.

Thus, the correct option is b. it’s velocity.

To learn more about motion, refer to the link:

https://brainly.com/question/3421105

#SPJ2

Answer:

67.89

Explanation:it’s right

The percent composition of carbon in  compound of acrylonitrile is 22.646%.

Percent composition  is defined as a convenient way to record concentration of solution.It is a expression which relates mass of element  to mass of compound  as,mass of element/mass of compound×100.

Percent composition helps in elemental analysis of compound which is useful in analysis of ores also.  It helps in making solutions while performing the titrations.  It helps in prediction of chemical formula which can be predicted by mass and molar mass of an element.

The compound acrylonitrile  has a molar mass 53.06 g/mole and that of carbon is 12 g/mole thus, percent composition of carbon in  compound of acrylonitrile is 12/53.06×100=22.646%.

Thus, the percent composition of carbon in  compound of acrylonitrile is 22.646%.

Learn more about percent composition,here:

https://brainly.com/question/17505281

#SPJ6

Answer:

0.55g/L

Explanation:

Given parameters;

Mass of salt  = 55g

Volume of water  = 100L

Unknown:

g/L concentration  = ?

Solution:

To solve this problem, we must understand that concentration is the amount of solute per solution

 g/L concentration  = [tex]\frac{55}{100}[/tex]   = 0.55g/L

Answer:

B  29 protons, 27 electrons

Explanation:

The given specie is copper ion:

         Cu²⁺  

We are to find the number of protons and electrons it contains.

 The number of protons is the positively charged particles in the atom.

 Electrons are the negatively charged particles in the atom.

The number of protons is the same as the atomic number

Atomic number of copper  = 29

 Number of protons  = 29

 Now;

    Charge  = Number of protons  - Number of electrons

     2  = 29  - number of electrons

     -27  = - number of electrons

 Number of electrons  = 27

Answer: [tex]KClO_3[/tex] is the limiting reactant in the given reaction.

Explanation:

Limiting reagent is defined as the chemical specie which gets totally consumed in the reaction and the formation of product is dependent on this reagent.

We are given:

Moles of [tex]P_4[/tex] = 30 moles

Moles of [tex]KClO_3[/tex] = 86 moles

The given chemical equation follows:

[tex]10KCIO_3+3P_4\rightarrow 3P_4O_{10}+10KCI[/tex]

By Stoichiometry of the reaction:

If 10 moles of [tex]KClO_3[/tex] reacts with 3 moles of [tex]P_4[/tex]

Then, 86 moles of [tex]KClO_3[/tex] will react with = [tex]\frac{3}{10}\times 86=25.8moles[/tex] of [tex]P_4[/tex]

As, given amount of [tex]P_4[/tex] is more than the required amount. So, it is considered as an excess reagent.

Therefore, [tex]KClO_3[/tex] is considered as a limiting reactant because it limits the formation of product.

Answer:

See explanation

Explanation:

Manganese is a transition element. All transition elements have incompletely filled d orbitals which ultimately makes them to exhibit a variable oxidation state.

Manganese has electronic configuration of [Ar]4s23d5. This means that two electrons could be lost from the s orbital to yield Mn^2+. Also, two electrons could be lost from both s and d orbitals to yield Mn^4+

Answer:

It the acid easier to handel

Answer:

gas

Explanation:

its either gas or plasma but gas should be it bc liquid and solid are cold

Answer:

12 moles H2O

Explanation:

Your tools of choice for stoichiometry problems will always be the mole ratios that exist between the chemical species that take part in the reaction.

As you know, the stoichiometric coefficients attributed to each compound in the balanced chemical equation can be thought of as moles of reactants needed or moles of products formed in the reaction.

In your case, the balanced chemical equation for this synthesis reaction looks like this

2H2(g]+O 2(g]→2H2O(l]]

Notice that the reaction requires

2

moles of hydrogen gas and

1

mole of oxygen gas to produce

2

moles of water.

This tells you that the reaction produces twice as many moles of water as you have moles of oxygen gas that take part in the reaction.

You know that your reaction uses

6.0

moles of oxygen. Assuming that hydrogen gas is not a limiting reagent, you can say that the reaction will produce

6.0

moles O

2⋅2

moles H

2O1

moles O

2=

12 moles H2O

Answer:

Liquids

Explanation:because animals like dolphins use sound radiation under water to hear each other

Answer:

D. all of these.

Explanation:

it can travel through solids, liquids, and gasses.

Answer:

[tex]Distance = 40km[/tex]

Explanation:

Given

[tex]Speed = 80km/hr[/tex]

[tex]Time = 0.5hr[/tex]

Required

Determine the distance covered

Distance is calculated as:

[tex]Distance = Speed * Time[/tex]

Substitute values for Speed and Time

[tex]Distance = 80km/hr * 0.5hr[/tex]

[tex]Distance = 80km * 0.5[/tex]

[tex]Distance = 40km[/tex]

Hence, you travelled 40km

Answer:

See explanation

Explanation:

You see, we must cast our minds back to Charles' law. Charles' law gives the relationship between the volume of a gas and temperature of the gas.

Now, Micheal left the balloon outside at a particular temperature and volume the previous night. Overnight, the temperature dropped significantly and so must the volume of the gas in the balloon!

Remember that Charles' law states that, the volume of a given mass of gas is directly proportional to its absolute temperature at constant pressure. Since the pressure was held constant, the drop in the volume of gas in the balloon can be accounted for by the drop in temperature overnight.

Answer:

It is called "periodic" because elements are lined up in cycles or periods. From left to right elements are lined up in rows based on their atomic number (the number of protons in their nucleus). ... Each horizontal row in the table is a period. There are seven (or eight) total periods.

Explanation:

Answer:

C

Explanation:

Fluorine has a smaller atomic radius than oxygen.

Answer:

because I make eggs and they taste delicious

Answer:

Conclusion

Explanation:

Answer:

yesyeysesyesyesyesteys

Answer:

I believe the answer would be chemical reaction.

Answer:

Partial pressure of Ar = 0.73 atm

Explanation:

Given data:

Volume of flask = 1.00 L

Mass of Ar = 1.20 g

Temperature = 25 °C (25+273.15 K= 298.15 k)

Total pressure = 1.300 atm

Partial pressure of Ar = ?

Solution:

First of all we will calculate the number of moles of Ar:

Number of moles = mass/ molar mass

Number of moles = 1.20 g/ 39.95 g/mol

Number of moles = 0.03 mol

Pressure of Ar:

PV = nRT

R = general gas constant = 0.0821 atm.L /mol.K

P×1.00 L =  0.03 mol ×  0.0821 atm.L /mol.K× 298.15 k

P = 0.73 atm.L /1.00 L

P = 0.73 atm

Total pressure = Partial Pressure of Ar + Partial pressure of ethane

1.300 atm = 0.73 atm + P(ethane)

P(ethane) = 1.300 atm - 0.73 atm

P(ethane) = 0.57 atm

Answer:

Di Sulphur tetraiodide is the chemical compound with the formula S2I4

Explanation:

Answer:

Fossil record

Explanation:

but first think about it befor you do so it could be wrong im not a computer

Answer:

4 mol

Explanation:

Given data:

Number of atoms of He = 2.4 × 10²⁴ atoms

Number of moles of He = ?

Solution:

Avogadro number:

The given problem will solve by using Avogadro number.

It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.

The number 6.022 × 10²³ is called Avogadro number.

1 mole = 6.022 × 10²³ atoms

2.4 × 10²⁴ atoms × 1mol / 6.022 × 10²³ atoms

0.398× 10¹ mol

3.98 mol ≅ 4 mol

ANSWER:

moles CO2 = 88 mol

EXPLAIN:

In order to go from molecules of CO2 to moles of CO2, we have to use the following relationship:

I usually set up dimensional analysis questions like this:

Quantity sought = Quantity given x conversion factor

Now we just plug the values into the format I have above (make sure your units cancel out as you are going through this process, that's how you know if you are doing the calculations correctly or not):

moles CO2 = 5.3×10∧25 molecules×1mol/6.02×10∧23 molecules

moles CO2 = 88 mol