plsss anyone help I BEG. its not that hard im just lazy and don't feel like thinking3

Answer:

1s2,2s2,2p6 or (He) 2s2 2p6

1 watt = 1 joule/second

1 KW = 1,000 joule/second

Work = (power) x (time)

3.6 x 10⁴ J = (2,984 joules/second) x (time)

time = (3.6 x 10⁴J) / (2,984 J/s)

time = (36,000J) / (2,984 J/s)

time = 12.06 seconds

Answer: The answer is in your heart

Explanation: I don't know, just trust °_°

It depends on the location on the periodic table and if it is easier to loose are gain electrons to fill the valence electron shell.

The electron affinity of the neutral atom of the element can show indicate whether or not the element is going the make positive or negative ions.  The higher the electron affinity is, the more the neutral atom wants to gain electrons.

The electron affinity for alkali metals and alkaline earth metals are low due to the fact that they are located on the left of the periodic table and only needs to loose 1 or 2 electrons to have a completed valence shell.

That means that they want to form cations (loose electrons).  Halogens have a high electron affinity since they are located on the right of the periodic table and only have to gain 1 electron to get a completed valence electron configuration.  That means that it forms anions.

Therefore, It depends on the location on the periodic table and if it is easier to loose are gain electrons to fill the valence electron shell.

Learn more about periodic table on:

https://brainly.com/question/11155928

#SPJ2

Answer:

D

Explanation:

I hope you get a good grade!

Answer:

6000pa

Explanation:

force= 2400N

area= 0.4m

pressure=?

now,

p= f/a

p= 2400/ 0.4

therefore,P=6000 pa.

Answer:

14.76

Explanation:

If you put it in the calculator it would show

Hello there!

I hope you and your family are staying safe and healthy during this unprecendented time.

A) What is the work done?

Answer: We need to use the formula

[tex]w=-F_f(d)[/tex]

[tex]w=-(35)(20)[/tex]

[tex]w=-700J[/tex]

B) What is the work done on the cart by the gravitational force?  

Alright, we know that the gravitional force is perpendicular to the diplacement. Therefore, we gonna use the following formula:

[tex]w=Fdcos90[/tex]

[tex]w=0[/tex]

C) What is the work done on the cart by the shopper?

This is the easier part, since we already know that the work done by the shopper is the same as the work done by the friction force

[tex]W shopper + W friction = 0\\W shopper = W-friction \\W shopper = 700J[/tex]

D) Find the force the shopper exerts, using energy considerations.

[tex]F_f+Fcos25=0\\-35+Fcos25=0\\F=38.6N[/tex]

E) What is the total work done?

You just need to add them:

[tex]w=wshopper+wfriction\\w=0[/tex]

Answer:

The charge of an element is equal to the number of protons minus the number of electrons. The number of protons is equal to the atomic number of the element given in the periodic table. The number of electrons is equal to the atomic number minus the charge of the atom.

Explanation:

Answer:

hydrogen sometimes has a charge of zero or (less commonly) -1. Although noble gas atoms almost always carry a charge of zero, these elements do form compounds, which means they can gain or lose electrons and carry a charge.

Explanation:

Answer:

1) D

2) C

3) E

4) A

5) B

Explanation:

Hope this help!

Answer:

C. The half-life of uranium-235 is 713,000,000 years, the half-life of uranium-238 is 4,500,000,000 years

it absorbs all ligj colour except black

The vertical component of the velocity at the starting is 12.5 m/s upwards.

Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time.

In kinematics, the area of classical mechanics that deals with the motion of bodies, velocity is a fundamental idea.

Given that  stone is thrown upwards with an initial velocity of 25 m/s at angle of 30°.

Hence,  the vertical component of the velocity in upward direction = 25 sin30° m/s

= 25 × 1/2 m/s

= 12.5 m/s.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

Answer:

B

Explanation:

︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎ ︎  ︎ ︎ ︎ ︎

Answer:

if u have to find mass then it always constant everywhere that is 100kg but if u have to find weight then it 1/6 of earth .

Explanation:

16.6666

Answer:

The heating element of the heater is made up of alloy which has very high resistance so when current flows through the heating element, it becomes too hot and glows red. But the resistance of cord which is usually of copper or aluminum is very low so it does not glow.

Answer:

increase

Explanation:

The formula for the gravitation for of attraction is:

[tex]F = \dfrac{Gm_1m_2}{r^2}[/tex]

It implies that the force of attraction is inversely proportional to the square of the distance. i.e.

[tex]F \infty \dfrac{1}{r^2}[/tex]

where;

G = gravitational constant

m = mass; &

r = distance between the two objects.

Now let's assume that the distance between is reduced from 1 to half;

Then:

[tex]F \infty \dfrac{1}{\Big (\dfrac{r}{2} \Big)^2}[/tex]

[tex]F \infty \dfrac{4}{r^2}[/tex]

Thus, the new gravitational force of attraction increased by a factor of 4.

Answer:

A siphon is a tube that makes use of the potential energy of fluid at an elevated level to transfer the fluid to a lower level, due to pressure differences between the inlet and the outlet points of the tube, such that the pressure at the outlet is higher than the pressure at the inlet

The pressure energy is converted into velocity (kinetic) energy, and therefore, in other to increase the flow rate through the tube of a siphon, with constant diameter, the level of the fluid in the container at the inlet (supply) of the siphon is raised higher than the level at the outlet receiving) container or the outlet point of the siphon tube

The larger the difference between the inlet and outlet levels, the faster the transfer of fluid by the siphon

Explanation:

Answer:

The pressure difference is equal to the product of density , height and g

Given that h is height difference between bottom and surface of a pool

P  

b

​  

−P  

s

​  

=dgh

Density d of water is 1

So we get P  

b

​  

−P  

s

​  

=gh

Therefore option A is correct

Explanation:

Answer:

The water in a reservoir behind a hydropower dam is another example of potential energy. The stored energy in the reservoir is converted into kinetic energy as the water flows down a large pipe called a penstock and spins a turbine.

Explanation:

Hope this helps :))

A concrete dam holds back a large reservoir of water potential energy, the stored potential energy is converted into the kinetic energy which is converted into mechanical energy and then further converted into electrical energy.

A dam or other construction that alters the natural flow of a river or other body of water is used to generate hydropower, often known as hydroelectric power.

In order to generate energy, hydropower uses the perpetual, never-ending water cycle, which uses water as a fuel and leaves no waste products behind. Although there are many different kinds of hydropower plants, they are always propelled by the kinetic energy of water moving downstream.

Thus, a concrete dam holds back a large reservoir of water potential energy.

To learn more about hydropower here, refer to the link given below ;

https://brainly.com/question/22258411

#SPJ2

Answer:

32

Explanation:

Answer:

Unsaturated

Explanation:

the solubility of sodium nitrate is at 60 C is 124g/ml therefore, putting 100 grams will not saturate fully.

Answer:

6km

Explanation:

3hours X 2km = 6 kilometres

It's Acceleration

We can calculate the average speed by finding the total distance traveled divided by the elapsed time: Average speed=–s=Total distanceElapsed time. Average speed = s – = Total distance Elapsed time.

Answer: Ionisation is the process of an atom gets a negative or a positive charge by gaining or losing electrons. The result is an ion.

Explanation: Thats why

Explanation:

Warm air falls to the ground

The statement that is correct about air temperature is when the air temperature is higher, the weather is warmer. The correct option is 1.

A measurement of the air's heat or cold is its temperature. It is the weather parameter that is most frequently measured.

The kinetic energy, or energy of motion, of the gases that make up air, is more explicitly described by temperature. The temperature rises as gas molecules move more swiftly.

Surface temperatures are typically hotter than air temperatures. Parking your car in the sun is an illustration of this. The air inside the car will be fairly close to the outside air temperature and you may leave the windows down and yet have excellent ventilation.

Therefore, the correct option is 1. When the air temperature is higher, the weather is warmer.

To learn more about air temperature, refer to the link:

https://brainly.com/question/26706491

#SPJ6

Answer:

Se realizan estudios en tres áreas: a) Procesos de transformación de la energía, b) Almacenamiento de la energía, c) Gestión inteligente entre consumo y generación.

Explanation:

Actualmente, se están realizando estudios en principalmente en tres áreas cruciales: a) Procesos de transformación de la energía, b) Almacenamiento de la energía, c) Gestión inteligente entre consumo y generación.

a) Se están desarrollando nuevos materiales que permiten mayor eficiencia entre la energía recibida y la energía eléctrica, además de una mayor durabilidad frente a las condiciones ambientales. Esto implica el mejoramiento del desempeño de las tecnologías basadas en las energías renovables y limpias, acortando su brecha con las energías no renovables.

b) Se están desarrollando nuevos materiales que garanticen una mayor densidad energética y mayor durabilidad, significando baterías más compactas, con mayor capacidad y más competitivas económicamente.

c) Se están desarrollando estrategias de control inteligente a tiempo que permite sincronizar el consumo y la generación, además de posibilitar el flujo bidireccional de la energía a través de una red inteligente (smart grid) e integrar mejor las fuentes renovables dentro de la matriz energética.

Answer:

9 ohms

Explanation:

P = V²/R

R = v²/p = 6²/4 = 36/4 = 9 ohms.

The resistance is 9 Ohm.

To find the resistance, we need to know about the power in term of resistance and voltage.

Thus, we can conclude that the resistance is 9 Ohm.

Learn more about the electrical power here:

brainly.com/question/16054310

#SPJ2