Explanation:
A matchstick has a lot of chemical energy stored in it. When the match is struck, it burns and the chemical energy in it produces heat energy and light energy.
brainliest and follow and thanks
I have a question for us gals, is it hard for all of you when you try to get your crushes attention and he/she just keeps ignoring you to the point where you could just give up?
Answer:
Yes it is hard. For some of us. I already gave up, but now hes coming back. Id say sometimes its useless to get his attention if he never even pays attention to you anyways. It sucks because its so hard to get then to notice you for once.
Explanation:
what are the chemical symbols of the particles found in the calcium chloride crystal (lattice)
Answer:
Formula and structure: The chemical formula of calcium chloride is CaCl2, and its molar mass is 110.983 g/mol. It is an ionic compound consisting of the calcium cation (Ca2+) and two chlorine anions (Cl-). The bivalent calcium metal forms an ionic bond with two chlorine atoms, as shown below.
Based on the ionic nature of calcium chloride, the chemical symbols of the particles found in the calcium chloride crystal is Ca²⁺ and Cl⁻.
What are ionic compounds?
Ionic compounds are compounds which are composed of ions.
Calcium chloride is an ionic compound composed of the ions, calcium ions and chloride ions.
The chemical formula of calcium chloride is CaCl2, and its molar mass is 110.983 g/mol.
The symbol for calcium ion is Ca²⁺
The symbol for chloride ion is Cl⁻.
Therefore, the chemical symbols of the particles found in the calcium chloride crystal is Ca²⁺ and Cl⁻.
Learn more about ionic compounds at: https://brainly.com/question/11638999
In a separate location, take notes from the sources you’ve identified. The notes will provide details for your paper. While taking notes, you may want to use these reading strategies. Use these sources if you find them helpful: Using your notes, compare the features of analog and digital signals in the table provided. Include one to three points for each feature and type of signal.
Answer:
Here is every answer for analog and digital (in order)
Analog:
Signal Shape: Smooth and continuousNumerical Values for Signal Measurements: Analog signals represent one continuous variable as the result of another continuous time-based variable. They are capable of outputting continuous information with a theoretically infinite number of possible values.Amount of Data that can be transmitted: analog circuits can conduct only fairly low-speed data communications. The maximum data rate over an analog facility is 33.6K bps when there are analog loops at either end. With 56K bps modems, only one end of the loop can be analog. The other end of the connection has to be digital. Energy requirements: light, sound, temperature, position, and pressurePrivacy and security (ability of the signal to be encoded in a secret code): not encryptedClarity of Signal: noise affects clarity and quality, noise is amplified, amplified noise causes more random information in the signal, signal bandwidth is lowDigital (in order):
Signal shape: stepping, square, and discreteNumerical Values for Signal Measurements: digital communication methods transmit a complete measured value, in other words both a numeric value and a unit of measurement Amount of data that can be transmitted: First of all, it is theoretically possible to transmit digital signals directly. Unfortunately when we use capacitors and inductors (energy storage devices) to match the impedance from the transmitter to the air (low impedance transistor say 5 ohms to 388 ohms (air)) these components introduce a bandwidth limiting match. Since all impulse functions have infinite bandwidth (transmitting a 1 and a zero) the bandwidth of the transceiver must be multi octave in order to have any reasonable efficiency. Systems engineers simplify the problem by introducing direct sequence modulation where a carrier is modulated 0/180 degrees dependent on the data rate.Energy requirements: voltage, accoustic pressure, and magnetization of a magnetic storage mediaPrivacy and security: encryptedClarity of signal: noise is lower in amplitude, electronics can ignore the noise, quality of signal is maintained, signal is highExplanation:
I did mine in bullet points, hopefully this helped!
Analog:
Signal Shape: Smooth and continuous
Numerical Values for Signal Estimations: Analog signals speak to one ceaseless variable as the result of another ceaseless time-based variable.
Amount of Information that can be transmitted: analog circuits can conduct as it were reasonably low-speed information communications.
Energy necessities: light, sound, temperature, position, and pressure Privacy and security : not encrypted
Clarity of Signal: clamor influences clarity and quality, commotion is amplified,
Digital:
Signal shape: stepping, square, and discrete
Numerical Values for Signal Measurements: digital communication methods transmit a complete measured value, in other words both a numeric value and a unit of measurement
Amount of data that can be transmitted: First of all, it is theoretically possible to transmit digital signals directly.
Energy requirements: voltage, accoustic pressure.
Privacy and security: encrypted
Clarity of signal: noise is lower in amplitude, electronics can ignore the noise, quality of signal is maintained, signal is high
Analog and digital is :Analog signal could be a continuous signal which speaks to physical estimations.
Digital signals are discrete time signals created by computerized balance.
Example :Human voice in discuss, analog electronic gadgets. Computers, CDs, DVDs, and other advanced electronic gadgets.
Why can water birds drown if they still have detergent on their feathers?
Science please help. I will add you and please don’t give me any random websites
Answer:
C
Explanation:
Answer:
D)
Explanation:
On land, volcanoes form when one tectonic plate moves under another. Usually a thin, heavy oceanic plate subducts, or moves under, a thicker continental plate. When this happens, the ocean plate sinks into the mantle.
DUE TONIGHT!
I need help doing this question and please type an ACTUAL answer. I don’t want none of that “aNsWeR iN FiLe”. Thank you!
Calculate the specific heat (Cp) for indium metal given a 1.0 mole absorbs 53.0 J
while increasing in temperature from 297.5K to 299.5K.
Answer:
27J/Kmol
Explanation:
Heat = number of moles times the Moeller heat capacity chimes the change in temperature.
^ Q = nC△T
^ C = Q/ n△T = +53J / (1mol) (299.5K - 297.5K)
^ = 26.5 (rounded to 27)
How to know the state of elements in a reaction
Answer:
each compound or molecule is indicated in subscript next to the compound by an abbreviation in parentheses. For example, a compound in the gas state would be indicated by (g), solid (s), liquid (l), and aqueous (aq).
Explanation:
Which two compounds of oxygen are small molecules?
Explain why metals conduct electricity. Refer to structure and bonding in your answer
Answer:
They are electrical conductors because their delocalised electrons carry electrical charge through the metal.
Explanation:
for the second ques
not sure...
1. What is the major determining factor in soil formation? Define this factor and explain how it influences soil formation.
PLEASE HELP ME PLEASE
Answer:
Temperature and precipitation
Explanation:
They determine how quickly weathering will be, and what kind of organic material may be available on the inside of the soils.
Temperature and precipitation is the major determining factor in soil formation. They define the type of organic material that can be present inside the soils as well as how rapidly weathering will occur.
What is soil?The bioactive, porous media that has grown in the top layer of the Earth's crust is known as soil. Being a source of water as well as nutrients, a filter for harmful wastes, a site for their breakdown, and a participant inside the cycle of elements such as carbon through the planet's ecosystem, soil constitutes one of the main substrates of life on Earth.
It has changed as a result of weathering processes influenced by geographical, geologic, biological, and climatic factors. A practical understanding of soils including their management has also developed out of need since the development of agriculture with forestry in the eighth millennium BCE. Temperature and precipitation is the major determining factor in soil formation. They define the type of organic material that can be present inside the soils as well as how rapidly weathering will occur.
Therefore, temperature and precipitation is the major determining factor in soil formation.
To know more about soil, here:
https://brainly.com/question/27588666
#SPJ3
Compare and contrast a driver of a car and truck, and list defensive driving no links
Answer:
These defensive driving skills can help you avoid the dangers caused by other ... being aware of the cars around you, checking your mirrors — the list goes on. ... It's not just teen drivers who are at fault: People who have been driving for a while ... car and a slow-moving truck in the same lane, it's a pretty sure bet the driver ...
Explanation:
(b)
Magnesium sulphate can be made from magnesium and dilute sulphuric acid.
This is the equation for the reaction.
Mg
+
H2SO4
MgSO4
+
H2
Calculate the mass of magnesium sulphate that would be obtained from 4g of
magnesium
(Show your working.)
Answer:
Reaction
Mg+H2SO4 ----》MgSO4+H2
so calculate the moles of magnesium first
moles of magnesium = given mass of mg/molar mass of magnesium
moles = 4/24.30
moles = 0.1646
One mole of magnesium produces one mole of magnesium sulphate
so 0.1646 moles of mg will produce 0.1646 moles of MgSO4
Mass of MgSO4 = 0.1646× 120.366
MgSO4 = 19.81 gm
conclusion the mass of magnesium sulphate that would be obtained from 4g of
magnesium is 19.81 gm!!
I d k it's right or wrong but i tried :)
Pb(NO3)2 (aq) + 2 NaI (aq) --> PbI2 (s) + 2 NaNO3 (aq)
Starting with with 50.0 grams of Pb(NO3)2 and 30.0 grams of NaI:
A. What is the limiting reagent?
B. How many grams of the excess reactant remains?
C. How many grams of each product is formed?
D. If 12 grams of NaNO3 actually formed in the reaction, what is the percent yield of this reaction?
Answer:
Explanation:
Moles of Pb(NO3)2 = mass/molecular mass
= 50.0 grams/(207.20*1 + 14.01*2 + 16*6)
= 50.0 grams/331.22
= 0.15 moles
Moles of NaI
= 30/(22.99+126.9)
= 30/149.89
= 0.2 Moles
A. NaI is less 2x Pb(NO3)2 so NaI is the limiting reagent.
B. The ratio is 1 to 2 so there is 0.15 - 0.2/2 = 0.05 mole
or 16.78 grams of Pb(NO3)2 left.
C. As NaI is limiting, only 0.2 Moles of NaNO3 is formed.
Mass = Moles * Molecular Mass
Molecular Mass of NaNO3 can be calculated as:
Na - 22.99
N - 14.01
O - 3(16) = 48
23+14+48 = 85gram / mole
Thus, Mass = 0.2*85 = 17 gram of NaNO3
Mass is conserved in a chemical reaction.
Mass of PbI2 can be calculated as:
50+30-16.78-17
= 46.3 gram of PbI2
Mass =
12.75
Thus, 12.75g of Sodium Nitrate can be formed
Answer:
Explanation:
Pb(NO3)2 (aq) + 2 NaI (aq) --> PbI2 (s) + 2 NaNO3 (aq)
MM for each compound -
Pb(NO3): 207 + 14x2 + 16x3x2 = 331
PI2: 207 + 127x2 = 461
NaI: 23 + 127 = 150
NaNO3: 23 + 14 + 16x3 = 85
Moles of Pb(NO3)2 = 50/331 = 0.15
Moles of NaI = 30/150 = 0.2
Ratio of moles is 1:2
So NaI is limiting
Limited to 0.2/2 = 0.1 mole of Pb(NO3)2
Excess = 0.15 - 0.1 = 0.05 mole
Mass remains = 0.05x331 = 16.55 grams
Moles of NaNO3 formed = Moles of NaI reacted = 0.2
Mass = 0.2x85 = 17 grams
Moles of PbI2 formed = Moles of Pb(NO3)2 reacted = 0.1
Mass = 0.1x461 = 46.1 grams
If 12 grams of NaNO3 actually formed in the reaction,
percent yield = 12/17x100% = 70.6%
write 2 typical properties that are only common to transition metals
Answer:
Properties of transition elements
they are all metals and that most of them are hard, strong, and lustrous, have high melting and boiling points, and are good conductors of heat and electricity.
Which compound is produced by a neutralization?
H2O(l)
HNO3(aq)
H3PO4(aq)
Ca(OH)2(s)
Explanation:
HNO3(aq) is the compound produced by a neutralization
You have 1 1/2 moles of 1 kg bottles of O2. What is the mass of O2 that you have?
A. 9.033x10^23 kg
B. 9.033x10^23 atoms
C. 1.80x10^27 kg
D. 1.806x10^24 moles
It is not B as I have already tried it :(
Answer:
A: 9.033 × 10^(23) kg
Explanation:
According to avogadro's number, we know that;
1 mole = 6.022 × 10^(23) kg
Thus;
1½(1.5) mole of O2 will produce;
(1.5 × 6.022 × 10^(23))/1 = 9.033 × 10^(23) kg
Looking at the options, the correct one is Option A.
A scientist is adding oxygen to iron in a chemical reaction to create rust. At what point during
this reaction will the oxygen and iron quit making rust?
Answer: What type of chemical reaction is rusting of iron?
Rust is formed when iron reacts with oxygen in moist air. The following chemical equation represents the reaction: 4Fe + 3O2 → 2Fe2O3. Water is necessary for the oxidation reaction to occur and to facilitate transport of the electrons.
The daily change from daylight to darkness is caused by:
Answer:
The daily change from daylight to darkness is caused by:the rotation of the Earth on its axis. If the Earth did not rotate as it does, the day/night cycle would be very different or possibly even nonexistent.
Explanation:
what is the difference between isotopes and allotrope not more than three line
Answer:
An allotrope is one way that atoms can be arranged in a solid. An isotope is one way that protons and neutrons can form the same atomic element.
1. A mixture of 3 gases (A, B, and C) has a total pressure of 240kPa. If the partial pressure of
Gas A is 107 kPa and the partial pressure of Gas B is 55 kPa, what is the partial pressure of
Gas C?
Answer:
78 kPa
Explanation:
The total pressure is the sum of the partial pressures:
240 = Pa + Pb + Pc
240 = 107 + 55 + Pc
Pc = 78 kPa
Answer:
78 kPa
Explanation:
What type of reaction is illustrated?
2S03 —> 2S02 + O2
Answer:
synthesis reaction
Explanation:
synthesis reaction where reactants unite to form a single product.
WHAT IS THE PH OF LEMON JUICE IF IT HAS A HYDROGEN ION CONCENTRATION [AT]ON[H^ + ]=5.0*10^ -2 M.
Can somebody help me please !!!!!!
Answer:
ph=2
Explanation:
Which reaction occurs when equivalent quantities of H" (or H30) and OH" are mixed?
1.
oxidation
2.
reduction
3
hydrolysis
4.
neutralization
Answer: A reaction which occurs when equivalent quantities of H" (or [tex]H_{3}O^{+}[/tex]) and OH" are mixed is a neutralization reaction.
Explanation:
When acid and base chemically combine together to form sat and water then it is know as neutralization reaction.
An acidic substance gives hydrogen ions [tex](H^{+})[/tex] on dissociation and a basic substance gives hydroxide ions [tex](OH^{-})[/tex] on dissociation.
For example, [tex]H^{+} + OH^{-} \rightarrow H_{2}O[/tex] is a neutralization reaction where an acid and base are mixed together to form water.
No salt is formed as because here the reactants are not present as compounds.
In a hydrolysis reaction, water molecule(s) is added to the reactant molecules.
For example, [tex]CH_{3}COOCH_{3} + H_2O \rightarrow CH_{3}COOH + CH_{3}OH[/tex]
Oxidation is the process of addition of oxygen to a molecule and removal of hydrogen.
Reduction is the process of addition of hydrogen in a compound and the removal of oxygen atom.
Therefore, we can conclude that reaction which occurs when equivalent quantities of H" (or [tex]H_{3}O^{+}[/tex]) and OH" are mixed is a neutralization reaction.
im struggling and dont want to fail
Answer: Hey I am sure you will do great just try your best
Explanation:
are you chemistry because you just blew up my heart
Answer:
i needed that lol
thank you
Explanation:
determining the molecular formula of a hydrocarbon with a relative molecular mass of 54
Answer:
C₄H₆
Explanation:
A hydrocarbon is a molecule that only contains atoms of Carbon and Hydrogen. As you remember, the molar mass of Carbon is 12g/mol and the molar mass of Hydrogen is 1g/mol.
To solve this question we can find the amount of Carbons necessary that doesn't exceed the 54g/mol. That is:
54g/mol / 12g/mol = 4.5
As the molecular formula must be given in whole numbers, the amount of Carbons is 4. This 4 carbons have a mass of:
12g/mol*4 = 48g/mol
And the hydrogens necessaries to suply the molecular mass are:
54 - 48 = 6 hydrogens
That means molecular formula is:
C₄H₆Based on the kinetic theory, which statement is true?
Matter is made up of only charged particles.
The particles of matter are stationary.
The particles of matter have zero kinetic energy.
Matter is composed of very small particles.
Answer:Matter is made up of only charged particles.
Explanation: Took the test
Write and balance the following reaction: Hydrogen gas reacts with oxygen gas to form water.
Answer:
[tex]2H_2 + O_2 -> 2 H_2 O[/tex]
How does every single cell in the body get the substances it needs to carry out the chemical reaction that provides it energy?
HELPPPP FASTTT! 4. Which is more electronegative?
A. Fluorine
B. Chlorine
C. Bromine
D. Iodine
Explain Your Answer Choice
Answer:
D.lodine
Explanation:
Lodine is a nonsteroidal anti-inflammatory drug . It works by reducing hormones that cause inflammation and pain in the body. Lodine is used to treat mild to moderate pain, osteoarthritis, or rheumatoid arthritis.
I hope it's helpful for you......
When sewing, push the needle with a force of 10 N. its spike area is equal to 0.0001 mm2. what is the pressure of the needle in the tissue
Answer:
1×10^5
Explanation:
Pressure = Force/Area
P= 10/0.0001
P= 10000
P=1×10^5