Answer:
0.55 m/s².
Explanation:
From the question given above, the following data were obtained:
Mass (m) of ball = 2 Kg
Force (F) applied = 1.1 N
Acceleration (a) =?
Force (F) is defined as the product of mass (m) and acceleration (a). Mathematically, the force (F) can be represented as:
Force (F) = mass (m) × acceleration (a)
F = ma
With the above formula, we can calculate the acceleration of the ball as follow:
Mass (m) of ball = 2 Kg
Force (F) applied = 1.1 N
Acceleration (a) =?
F = ma
1.1 = 2 × a
Divide both side by 2
a = 1.1 / 2
a = 0.55 m/s²
Therefore, the acceleration of the ball is 0.55 m/s²
What is a type of light that the sun emits but a light bulb does not?
Gamma ray
X-ray
Ultra violet (UV)
Visible
Infrared (IR)
Microwave
Radio
Household lightbulbs don't emit radio, microwave, X-rays or gamma rays, and only a smidgen of ultraviolet.
The sun emits everything on the list.
The Sun emits many types of light , the ultraviolet, X-ray, and even gamma-ray, radio and infrared parts of the spectrum.
The light bulb emits very small amounts of UV light.
The Sun emits many types of light , the ultraviolet, X-ray, and even gamma-ray parts of the spectrum.But most of the Sun's light is in the infrared, visible, and ultraviolet parts of the electromagnetic spectrum.The Incandescent light bulbs, the most commonly used light bulbs in homes, give off small amounts of UV light. The UV light emitted by these bulbs is so small that it's impossible for human health to be affected in any way.Learn more:
https://brainly.com/question/2499551
Which of the following statements about infrared telescopes is NOT true?
a. They are typically operated at lower temperatures.
b. They are especially helpful for viewing cool or obscured astronomical objects.
c. They were first built in the 1960s.
d. They are often placed on mountaintops.
e. They do not work well at high altitudes.
Answer:
a. They are typically operated at lower temperatures.
a. They are typically operated at lower temperatures.b. They are especially helpful for viewing cool or obscured astronomical objects.
Which of these is used to find the estimated age range of a fossil? Group of answer choices Absolute dating Half-life Index fossils Radioactive dating
Answer:
Radioactive Dating
Explanation:
To get the age range of rocks or fossils, researchers usually make use of radiometric dating technique which is also called radioactive dating. Now, this radioactive dating is based on the principle of comparison between the abundance that's observed from a naturally occurring radioactive isotope including its decay products, with the use of known decay rates.
what reactions do catalytic converters catalyze
What is used to turn the pointer of a galvanometer?
a.
a crank
b.
an electric current
c.
a bar magnet
d.
a battery
Answer:
b. an electric current is used to turn the pointer of a galvanometer
Explanation:
well , galvanometer is an important device which is used to detect an electric current through a conductor or circuit.
something special about it is that it can detect very minute current too
Answer:
b
Explanation:
a high school physics student with a mass of 68.18 KG is sitting in a seat reading this question the magnitude of the force with which the seat is pushing up upon the student is
A) 6.96 N
B) 66.82 N
C) 668.16 N
D) 1200 N
A dog starts at position x=2.50m, and undergoes a displacement of 8.25m. What is its final position?
Answer:
Civil law deals with behavior that constitutes an injury to an individual or other private party, such as a corporation. Examples are defamation (including libel and slander), breach of contract, negligence resulting in injury or death, and property damage.
Explanation:
Which graph accurately shows the relationship between kinetic energy and speed as speed increases?
Answer:
B
Explanation:
kinetic energy (KE) is the energy possessed by moving bodies. It can be expressed as:
KE = [tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex]
Where: m is the mass of the object, and v its speed.
For example, a stone of mass 2kg was thrown and moves with a speed of 3 m/s. Determine the kinetic energy of the stone.
Thus,
KE = [tex]\frac{1}{2}[/tex] x 2 x [tex]3^{2}[/tex]
= 9
KE = 9.0 Joules
Assume that the speed of the stone was 4 m/s, then its KE would be:
KE = [tex]\frac{1}{2}[/tex] x 2 x [tex]4^{2}[/tex]
= 16
KE = 16.0 Joules
Therefore, it can be observed that as speed increases, the kinetic energy increases. Thus option B is appropriate.
When you heat water, it changes from-- *
A a gas to a liquid
B a liquid to a gas.
C a liquid to a solid
Answer:
Hi! It's B - liquid to a gas.
The electric field between two parallel plates has a magnitude of 180 N/C. The two plates are 2.5 cm apart. Recall that the magnitude of the charge on an electron is 1.602 × 10-19 C.
How much work is done to move an electron from the positive plate to the negative plate?
4.0 × 10-21 J
7.2 × 10-19 J
4.5 J
7200 J
Answer:
b
Explanation:
The amount of work done to move an electron from the positive plate to the negative plate is : 7.2 * [tex]10^{-19}[/tex] J
Step 1: Given data
magnitude of two parallel plate ( E ) = 180 N/C
Distance between plates ( d ) = 2.5 cm
magnitude of charge on electron ( e ) = [tex]1.602 * 10^{-19}[/tex] C
Step 2 : determine the work done
Work done = qV = еEd
= [tex]1.602 * 10^{-19}[/tex] * 180 * 2.5
= 720 * [tex]10^{-22}[/tex] J ≈ 7.2 * [tex]10^{-19}[/tex] J
Hence the amount of work done to move an electron from the positive plate to the negative plate = 7.2 * [tex]10^{-19}[/tex] J
learn more about electric field : https://brainly.com/question/11509296
Calculate the volume of water in gallons that 4.1 mL of water takes up. Express your answer in scientific notation,
Explanation:
The unit of volume derived from SI units(1) is the cubic meter, m3.
Chemists in a laboratory usually deal with much smaller volumes than cubic meters and the metric but non-SI units of liter or litre (L) and milliliter or millilitre (mL or ml) are in common use.
In 1964 the litre was redefined as being equal to exactly 1 cubic decimetre:
1 L = 1 dm3
So 1 milliltre = 1 cubic centimetre
1 mL = 1 cm3 (= 1cc)
Other metric units of measuring volume are given in the table below:
large volume → → → → → → → → → → small volume
name teralitre gigalitre megalitre kilolitre hectolitre decalitre decilitre centilitre millilitre microlitre nanolitre picolitre femtolitre attolitre
symbol TL GL ML kL hL daL dL cL mL µL nL pL fL aL
volume (L) 1012 L 109 L 106 L 103 L 102 L 101 L 10-1 L 10-2 L 10-3 L 10-6 L 10-9 L 10-12 L
PLZZZ HELP
In addition to how much force Earth exerts on the object, which features of an object affect its weight?
A.mass and location of the object
B.shape and location of the object
C.location of the object and how much energy the object has
D.mass of the object and how much energy the object has
Answer/Explanation:
The weight of an object is defined as the force that is exerted due to the gravitational force.
Mathematically, it can be written as :
W = m g
Where
m is the mass of the object
g is the acceleration due to gravity
Also,
We know that the value of g varies with respect to the location. At the equator, the value of g is less as compared to the poles.
The feature of an object that affects its weight are :
Mass of the object
Location of the object
How much force Earth exerts on the object
A student lifts a basketball to a height of 6 feet and lets the ball drop to the ground. Which statement accurately compares the ball's energy at a height of 6 feet (at rest) and at a height of 2 feet (falling)?
A.
The ball's kinetic energy is the same at both heights, but its potential energy is different.
B.
The ball has less potential energy and more kinetic energy at 6 feet than at 2 feet.
C.
The ball's potential energy is the same at both heights, but its kinetic energy is different.
D.
The ball has more potential energy and less kinetic energy at 6 feet than at 2 feet.
Answer:C
Explanation:
If you are holding the ball that would be the ball would have potential energy since it it not moving. Once you drop the ball it will have kinetic energy since it’s moving. If you drop the ball from 6ft it will have more kinetic since it will have more time to accelerate. If you drop the ball from 2ft then it will have less kinetic energy since it is closer to the ground and won’t have beeping time to accelerate and get rid of the potential energy.
Answer:
c
Explanation:
Help me on question 5 pls I’m giving out brainlest!!
A 1000 kg car’s velocity increases from 5 m/s to 10 m/s. What is the change to the car’s kinetic energy? Show your work.
Answer:
k. e. = 1/2 mv^2
1/2 * 1000 * (5)^2
1/2 * 1000 * 25
12500 joules
k. e. = 1/2 mv^2
1/2 * 1000 * (10)^2
1/2 * 1000 * 100
50000
change in k. e. = final - initial
50000 - 12500
= 37500 joules
hope it helps you
4. The electric force between electric charges is much larger than the
gravitational forces between charges. Why, then, is the gravitational force
between the Earth and the Moon much larger than the electric force between
them?*
A. The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
B. The electric charge is actually greater and the question is false.
C. The phases of the Moon determine the amount of electric and gravitational force.
The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
Which of these force&mass pairs will result in the largest acceleration? *
50 N and 5 kg
60 N and 3 kg
30 N and 1 kg
25 N and 100 kg
10 N and 8 kg
Answer:
30N and 1 kg has largest acceleration
hope it helps youa stone is thrown vertically upwards with an initial velocity of 20 metre per second find the maximum height it reaches and the time taken by to reach the height( g =10m/s)
Answer:
y = 20 [m]
Explanation:
To solve this type of problem we must use the following equation of kinematics.
[tex]v_{f}^{2} =v_{o}^{2}-2*g*y[/tex]
where:
Vf = final velocity = 0
Vo = initial velocity = 20 [m/s]
g = gravity acceleration = 10 [m/s²]
y = elevation [m]
Now the key to solving this problem is to know that when the stone reaches the maximum height its speed is zero. Therefore the final velocity term is zero.
[tex]0 = (20)^{2}-2*10*y\\20*y=400\\y=20 [m][/tex]
Another important fact is that the sign of gravitational acceleration was taken as negative, since it acts in the opposite direction to the movement of the stone.
wooden block has a mass of 0.2 kg, has a specific heat of 710 J/(kg°C), and is a temperature of 20.0°C.
What is the block’s final temperature if its thermal energy increases by 2130 J?
Answer:
The final temperature is 35 °C.
Explanation:
Given that,
Mass of the wooden block, m = 0.2 kg
The specific heat of the block, c = 710 J/(kg°C)
Initial temperature, [tex]T_i=20^{\circ} C[/tex]
Thermal energy, Q = 2130 J
We need to find the block's final temperature. The thermal energy due to change in temperature is given by :
[tex]Q=mc(T_f-T_i)\\\\T_i\ \text{is initial temperature}\\\\\dfrac{Q}{mc}=(T_f-T_i)\\\\T_f=\dfrac{Q}{mc}+T_i\\\\T_f=\dfrac{2130}{0.2\times 710 }+20\\\\T_f=35^{\circ} C[/tex]
So, the final temperature is 35 °C.
Transfer of charge by touching is called... induction or conduction?
Answer:
Transfer of charge by touching is called conduction.
A car moving round a circular racing track takes 120s to do a lap of 8km what is the speed in km/hr.
Answer:
Solution in photo
Explanation:
A car moves around in a circular racing track, and it takes 120 seconds to do a lap of 8 km, so the speed in km/hr is 239.76 km/hr.
What is Speed?The speed of an object, commonly known as v in mechanics, is a scalar quantity that corresponds towards the size of the change in that object's position over duration or the size of the change in that object's position per unit of time.
The instantaneous velocity is the absolute maximum of the average speed as the time interval's duration gets closer to zero. The cruising pace of an object in a time interval is calculated by dividing its distance traveled by the time interval's duration. Velocity and speed are different concepts.
The given data according to the question is,
Time, t = 120 s
Distance, d = 8 km
s = 8/120
s =0.0666 km/sec or
s = 0.0666/1s × 3600
s = 239.76 km/hr.
Therefore, the speed is 239.76 km/hr.
To know more about Speed:
https://brainly.com/question/312131
#SPJ2
identfy the parts of he atom that are labeied in the
dagram
Label A:
Label B
NEED THE ANSWE ASAP!
Answer :
Label A - nucleus.
Label B- electron cloud.
Explanation :
An atom is the smallest unit of a matter that consist of three subatomic particles which are electrons, protons and neutrons.
The protons and the neutrons are located inside the nucleus or the center of the nucleus where the mass of the an atom is concentrated.
The electrons are located around the nucleus.
The protons are positively charged, the electrons are negatively charged and the neutrons are neutral that means it has no charge.
In the picture, label A shows the nucleus.
Electrons has the ability to revolve around the nucleus in a fixed circular orbit. Electron cloud represents the spreading of the electrons energy.
In the picture, label B shows the electron cloud.
Hence, the label A - nucleus and label B- electron cloud.
Why is a protective apron or lab coat important to use when working with acids?
Acids conduct electricity and contact could cause a shock.
Acids react with lipids and can cause damage to skin tissue.
Acids break down fabrics and can cause burns if the acids are strong.
Acids have a slippery feel and could result in a fall.
Answer:
Acids break down fabrics and can cause burns if the acids are strong.
Explanation:
A protective apron or lab coat is important when working with acids because acids break down fabrics and can cause burns if the acids are strong.
An acid is a substance that interacts with water to produce excess hydroxonium ions in an aqueous solution. A strong acid ionizes completely in solution. When they come in contact with a fabric, they break them down violently. So, if they come in contact with the skin, it causes a violent break down of body tissues. The apron acts a protective layer.Answer:
C
Explanation:
I got it right
what is SI unit electric current ?
Answer:
the si unit of electric current is Ampere .the flow of charge in a close circuit is called electric current
what english word does the following- the first two signify a male, the 1st 3 letters support a female, the first four support a great signifiles a woman. What is the english word?
Answer:
lol i know - i was rushing -_-
he= male
her=female
One word with both is heroin but Im not 100% sure
A sprinter runs at a forward velocity of 8.94 m/s. If the sprinter has a mass of 62.4 kg, what is the sprinter's kinetic energy?
1. 2500 J
2. 249 J
3. 249.3 J
4. 2490 J
Plzzz help me!!!
Answer: 2490 J
Explanation:
The formula to calculate kinetic energy is 1/2mv² where,
m = mass = 62.4
v = velocity = 8.94
Kinetic energy = 1/2mv²
= 1/2 × 62.4 × 8.94²
= 1/2 × 62.4 × 79.9236
= 2493.6J
The closest answer is option D.
3. A 3.0 g bullet traveling at a speed of 400 m/s enters a tree and exits the other side with a speed of 200 m/s. Where did the I bullet's lost KE go, and what was the energy transferred? Solution:
Answer:I had two questions: 1) Shouldnt the equation be : Change of internal energy= Change in Ke or KEi +Ui=KEf+Uf .. I cant seem to understand how the change in KE+ Change in Internal Energy equals 0 2) Also, it has a note which says that if the bullet alone was chosen as a system, then work would be done on it and the heat transfer woudl occur. How would one formulate an equation for this?
Explanation:
If 3.5 waves have a distance of 42M what is the wavelength of one wave?
Please please please tell me how you exactly found the answer!!
Answer:
The answer is 12
Explanation:
Just divide 42/3.5
A ‘thermal tap’ used in a certain apparatus consists of a silica rod which
fits tightly inside an aluminium tube whose internal diameter is 8mm at
0
0C. When the temperature is raised, the fit is no longer exact. Calculate
what change in temperature is necessary to produce a channel whose
cross-section is equal to that of a tube of 1mm internal diameter. (linear
expansivity of silica = 8X10-6
/K and linear expansivity of aluminium =
26X10-6
/K )
Correct question is;
A thermal tap used in a certain apparatus consists of a silica rod which fits tightly inside an aluminium tube whose internal diameter is 8mm at 0°C.When the temperature is raised ,the fits is no longer exact. Calculate what change in temperature is necessary to produce a channel whose cross-sectional is equal to that of the tube of 1mm. (linear expansivity of silica = 8 × 10^(-6) /K and linear expansivity of aluminium = 26 × 10^(-6) /K).
Answer:
ΔT = 268.67K
Explanation:
We are given;
d1 = 8mm
d2 = 1mm
At standard temperature and pressure conditions, the temperature is 273K.
Thus; Initial temperature; T1 = 273K,
Using the combined gas law, we have;
P1×V1/T1 = P2×V2/T2
The pressure is constant and so P1 = P2. They will cancel out in the combined gas law to give:
V1/T1 = V2/T2
Now, volume of the tube is given by the formula;V = Area × height = Ah
Thus;
V1 = (πd1²/4)h
V2 = (π(d2)²/4)h
Thus;
(πd1²/4)h/T1 = (π(d2)²/4)h/T2
π, h and 4 will cancel out to give;
d1²/T1 = (d2)²/T2
T2 = ((d2)² × T1)/d1²
T2 = (1² × T1)/8²
T2 = 273/64
T2 = 4.23K
Therefore, Change in temperature is; ΔT = T2 - T1
ΔT = 273 - 4.23
ΔT = 268.67K
Thus, the temperature decreased to 268.67K
What is the range of wavelengths that our eyes can see on the spectrum(this is called visible light spectrum)
Answer:
380 to 700 nanometers
Explanation:
The visible light spectrum is the segment of the electromagnetic spectrum that the human eye can view. More simply, this range of wavelengths is called visible light. Typically, the human eye can detect wavelengths from 380 to 700 nanometers.