Answer:
The shadow would be on your left side.
Explanation:Give brainliest if this helped :)
The cadmium in the control rods slows down a nuclear fission reaction by absorbing neutrons.
Please select the best answer from the choices provided
T
F
answer:
true
explanation:
cadmium is used during controlled reaction to produce energycredits: https://brainly.in/question/6969690Answer:
True!
Explanation:
cadmium is being used during controlled reaction which creates the energy!
I took this test! :3
A spring is pulled to 10 cm and held in place with a force of 500 N. What is the spring constant of the spring in N/cm?
Answer:
K=50N/cm
Explanation:
Force can be calculated using below expresion;
F=ke
where f = force,
k =spring constant,
e = extension
force = 500 N
e= 10 cm =
Then substitute, the given values
500=10 × k
k=500/10
K=50N/cm
Using a box covered with graph paper allows you to simulate which aspect of a car crash?
Answer:
a computer modeling
Explanation:
5.0 kg, with a bullet of mass 0.1 kg. The target was mounted on
low-friction wheels and as the bullet struck the target, the target with
bullet embedded bullet sped off with a velocity of 6.0 ms.
Calculate the velocity of the bullet just before it hit the stationary
target.
Answer:
306 m/s
Explanation:
Law of conservation of momentum
m1v1 + m2v2 = (m1+m2)vf
m1 is the bullet's mass so it is 0.1 kg
v1 is what we're trying to solve
m2 is the target's mass so it is 5.0 kg
v2 is the targets velocity, and since it was stationary, its velocity is zero
vf is the velocity after the target is struck by the bullet, so it is 6.0 m/s
plugging in, we get
(0.1 kg)(v1) + (5.0 kg)(0 m/s) = (0.1 kg + 5.0 kg)(6.0 m/s)
(0.1)(v1) + 0 = 30.6
(0.1)(v1) = 30.6
v1 = 306 m/s
The initial velocity of the bullet can be determined from the total momentum of the system. The velocity of the bullet was 306 m/s.
What is momentum ?Momentum of a body is the product of its mass and velocity. For a collision, the momentum before and after collision will be the same for the colliding system.
Let m1 and m2 be the masses and u be the initial velocity and v is the final velocity.
then, m1 u1 + m2 u2 = m1 v1 + m2 v2.
Given m1 = 5 kg
m2 = 0.1 kg
The velocity of the combined mass v = 6 m/s.
The momentum of the target is zero since it was stationary.
(0.1 × u1) = (0.1 + 5)6 m/s
(0.1 × u1) = 30.6 m/s
then u1 = 30.6/0.1 = 306 m/s
Therefore, the velocity of the bullet before hitting was 306 m/s.
Find more on momentum:
https://brainly.com/question/29113044
#SPJ2
Plzzzz help me!! Plz don’t guess, than you!!
Answer:
The answer is W
Una fuente luminosa de 75 W consume 75W de potencia electrica. Suponga que toda la energía se transforma en luz emitida de 600 nm de longitud de onda. a) Calcule la frecuencia de luz emitida b) ¿Cuántos fotones por segundo emite la fuente? C) ¿Son iguales las respuestas de de los incisos a) y b)?
Answer:
a) La frecuencia de la luz emitida es 5,0 × 10¹⁴ Hz
b) El número de fotones por segundo que emite la fuente es 2.26380924 × 10²⁰ fotones
c) Las respuestas del inciso a) yb) son diferentes
Explanation:
Los parámetros dados son;
La potencia de la fuente de luz, P = 75 W
La energía consumida cada segundo por la fuente de luz, E = 75 J
La longitud de onda de la luz emitida, λ = 600 nm
a) La relación entre la energía y la frecuencia de la luz se da a continuación;
υ = c/λ
E = n·h·υ
[tex]E = \dfrac{h \times c}{\lambda}[/tex]
Dónde;
E = La energía consumida por segundo = 75 J
h = constante de Planck ≈ 6.626 × 10⁻³⁴ J · s
υ = La frecuencia de la luz
λ = La longitud de onda de la luz = 600 nm
c = La velocidad de la luz, c = 3.0 × 10⁸ m / s
Por lo tanto, tenemos;
υ = c / λ = 3,0 × 10⁸ m / s / (600 nm) = 5,0 × 10¹⁴ Hz
∴ La frecuencia de la luz emitida, υ = 5.0 × 10¹⁴ Hz
b) El número de fotones por segundo que emite la fuente, 'n', se da como sigue;
n = E / (h · υ) = 75 J / (6.626 × 10⁻³⁴ J · s × 5.0 × 10¹⁴ Hz) = 2.26380924 × 10²⁰
El número de fotones por segundo que emite la fuente = n = 2.26380924 × 10²⁰ fotones
c) Las respuestas del inciso a) yb) son diferentes
5.0 × 10¹⁴ Hz ≠ 2.26380924 × 10²⁰ fotones.
please help me answer this
Answer:
W>R...............
Explanation:
.........................
Yes
Was Michael Jean Cazabon a local or regional artist?
Answer:
artist
Explanation:
A police car is moving east at 20m/s towards a driver who is moving west at 25m/s. The police car emits a frequency of 900Hz. What frequency is detected by the driver? The speed of sound at the time of this occurrence was 343m/s.
Answer:
f = 2445 Hz
Explanation:
i did the quiz
The frequency that the driver (observer) detects is equal to 1008 Hz
Given the following data:
Observer velocity = 25.0 m/sFrequency of sound = 900 HzSource velocity = 20.0 m/s Speed of sound = 343 m/sTo calculate the frequency that the driver (observer) detects, we would apply Doppler's effect of sound waves:
Mathematically, Doppler's effect of sound waves is given by the formula:
[tex]F_o = \frac{V \;+ \;V_o}{V\; - \;V_s} F[/tex]
Where:
V is the speed of a sound wave.F is the actual frequency of sound.[tex]V_o[/tex] is the observer velocity.[tex]V_s[/tex] is the source velocity.[tex]F_o[/tex] is the observer frequency.Substituting the given parameters into the formula, we have;
[tex]F_o = \frac{343 \;+ \;20}{343\; - \;20} \times 900\\\\F_o = \frac{363}{323} \times 900\\\\F_o = 1.12 \times 900\\\\F_o =1008 \;Hz[/tex]
Driver (observer) frequency = 1008 Hz
Read more: https://brainly.com/question/23460034
Which type of information about rattlesnakes does the bar graph above show?
Answer:
Variation
Explanation:
Which correctly describes have any giveaway on the electromagnetic spectrum depends on the wavelength and frequency
Answer:
c = λ f
Explanation:
In the electromagnetic spectrum, the wavelength and frequency of a specific radiation are related to the speed of the wave, which in this case the speed of light
c = λ f
where c is the speed of light, λ the wavelength and f the frequency of radiation
b) The man has a mass of 85 kg. Gravitational field strength = 9.8 N/kg.
Calculate the weight of the man. Use the equation: weight = mass x
gravitational field strength
Answer:
mass× weight
85×9.5=807.5 kg
1 HELP
----
A box is connected to a spring is extended to 200mm, and it stored 3578J of energy. Find the
force.
Answer:
The force applied to the spring is 35,780 N
Explanation:
Given;
extension of the spring, x = 200 mm = 0.2 m
energy stored in the spring, E = 3578 J
The force applied to the spring is calculated as;
E = ¹/₂Fx
where;
F is the applied force
F = 2E/x
F = ( 2 x 3578) / 0.2
F = 35,780 N
Therefore, the force applied to the spring is 35,780 N
A plant fertilized by another plant is called __________. *
Answer:
pollination
Explanation:
it involves the transfer of a fertilized plant to another
Answer:
pollination
Explanation:
plants can't really do much without bees keep in mind
a rock is an example of a solid because
Answer:
The key is that solids hold their shape and they don't flow like a liquid. A rock will always look like a rock unless something happens to it.
Solids can hold their shape because their molecules are tightly packed together.
Explanation:
Yes; it is a solid
A wave has a period of 2 seconds and a wavelength of 4 meters. Calculate its frequency and speed.
Note: Recall that the frequency of a wave equals 1/period & the period of a wave equals 1/frequency.
Answer:
frequency = 0.5 /s
speed = 2m/s
Explanation:
frequency = 1/period = 1/2 = 0.5 /s
speed = frequency × wavelength
= 0.5 × 4 = 2m/s
A total lunar eclipse is:
a. Visible only from the path of totality
b. Visible to all observers on the night time side of the earth
c. Visible only during a new moon
d. an opportunity to study the corona of the sun
Answer:
B) Visible to all observers on the night time side of the earth
Explanation:
I hope this helps.
5 points
What did Alfred Wegener think happens during Continental Drift?
A. Continents move
B. The mantle warms
C. Convection Stops
D. Continents freeze
Answer:
Continents move
Explanation:
A tugboat is pulling a barge into a harbor. The barge is exerting a force of 3000 N against the tugboat. Which force would most likely allow the tugboat to move the barge into the harbor? –4500 N –2500 N 2500 N 4500 N
Answer:
the correct one is F’= 4500 N
Explanation:
To solve this problem we must use Newton's second law
where F₁ is the force of the barge F₁ = 3000N and the force of the tugboat is F '
F '- F₁ = m a
we substitute
F '- 3000 = m a
the mass is always a positive quantity, therefore if we want the tug to pull the barge
F ’-3000> 0
when you check it, you respect the correct one is F’= 4500 N
Answer:
The answer is -4500 N
Explanation:
I just got it right on the test
Which two statements are true about the wave shown?
A. The wave could be transmitting light. B. The wave is a transverse wave.
C. The wave is a mechanical wave.
D. The wave could be transmitting sound.
Answer:
c and d
Explanation:
The wave shown in the figure is Sound waves. The sound wave is a mechanical wave. Hence, options C and D are correct.
What are sound waves?Sound is traveled by means of vibrations of particles in the medium. Sound waves require a medium to propagate. The energy propagation by means of adiabatic loading and unloading is called sound or acoustic waves.
The sound waves produce compression and rarefaction in the air. The sound waves are called Longitudinal waves because the direction of propagation is parallel to the vibration of particles.
Sound waves are considered only as waves because they exhibit a wave nature. Light has both properties of wave and particle. Light is an electromagnetic wave and it is transverse in nature.
The sound waves require a medium like air, water, solids, etc for propagation. Hence it is called Mechanical waves. Light waves do not require a medium to propagate. From the given wave pattern, it exhibits the property of sound waves.
Hence, the correct option is C) the wave is a mechanical wave, and D) the wave could be transmitting sound.
To learn more about Sound waves:
https://brainly.com/question/11797560
#SPJ5
can someone help me please
2. A bullet was shot by a gun with an initial speed of 260 m/s and is fired at an angle of 30 to the ground. a. How much is the value Vy at the top of the bullet's trajectory? b. Calculate the time taken by the bullet to reach its maximum altitude. c. Deduce the total time taken by the bullet in the air. d. Calculate the range of the bullet.
Answer:
Explanation:
a )
the value Vy at the top of the bullet's trajectory will be zero . At the top , only the horizontal component Vx will exist .
b )
At the top Vy = 0
initial velocity will have vertical component = 260 sin30 = 130 m /s
acceleration = - g = - 9.8
v = u - gt
o = 130 - 9.8 t
t = 13.26 s .
c )
Total time = Time of ascent + time of descent
= 13.26 + 13.26 = 26.52 s
d )
Range R = u² sin2Ф / g , where u is initial velocity , Ф is angle of throw , g is acceleration due to gravity .
R = 260² sin 2 x 30 / 9.8
= 5973.8 m .
PLS ANSWER FAST WILL GIVE BRAINLY!! BUT ONLY IF YOU KNOW!!
Fill in the blanks
Cobalt has 27 protons, 32 neutrons and 27 electrons. What is it's atomic mass?
Answer:
58.933195 u or 59 u
Explanation:
Atomic mass of cobalt is 58.933195 u
Which statement best describes what occurs when a warm front occurs?
A)Snow showers occur, followed by colder weather.
B)The weather doesn't change.
C)Rain and showers occur, followed by warmer weather.
D)Cloudy, cold weather occurs.
A solar eclipse may occur when:
A. when the moon is 3rd quarter phase
B. when the moon is full
C. when the moon is at 1st quarter phase
D. when the moon is new
If you walk up a set of steps empty handed and walk up the same set of steps holding a flower pot in thesame amount of time. Which requires more work?
a.) empty handed b.) holding flower pot c.) same
Explanation:
I think holding a flower pot. more energy will be needed
Move the slider on the battery to give it some voltage. What do the particles moving through the coil of wire represent?
It represents electrons. The moving electrons show current passing through the wire
A car of mass 150 kg is riding down at constant velocity What is the friction force?
Answer:
I think it's b
Explanation:
friction is the opposite direction of the object do it's definitely left something
Other than the resultant force acting on an object what else do you need to know to calculate the acceleration??
In addition to the resultant force acting on an object, the mass of the object should be known to find the acceleration. So, the mass is the answer.
Newton's second law of motion states that
a = F / m
Where:
a is the acceleration of the object,
The net force acting on the object is F
m is the mass of the object.
By dividing the net force (F) by the mass (m), you can determine the acceleration (a) of the object.
So, both the net force and the mass are necessary to calculate the acceleration. So, the mass is the answer.
To know more about mass:
https://brainly.com/question/30940568
#SPJ4
100%
Look carefully at the diagram below, which shows two cells connected in series. What will the reading on the ammeter be?
Enter your answer as a number
Submit
1.5v
1.5v
Answer:
The reading on the ammeter is 0 ampere
Explanation:
When two or more voltage sources are arranged in series as shown in the diagram, the resultant voltage is given by the sum of the voltages by taking into consideration the direction of the polarities of the voltage sources which can be either series aiding voltage source configuration or series opposing voltage source configuration
In the series aiding voltage source configuration, the positive terminal of one voltage source is connected to the negative terminal of the next voltage source such that the current flows in the same direction in both sources of the voltage in the circuit and the resultant voltage source is given by adding the individual voltage sources together
However, in the series opposing voltage source configuration, the positive terminal of one voltage source is connected to the positive terminal of the next voltage source such that the current flows in opposite direction in both voltage sources and the voltage across the entire voltage sources is given by finding the sum of the differences of the opposing voltage sources
The arrangement of the voltage sources in the question is one of a series opposing voltage configuration and the voltage across both voltage sources is given by subtracting one (usually the smaller voltage source) from the other as follows;
[tex]V_{(series \ opposing)}[/tex] = V₁ - V₂
Where;
V₁ = The voltage of one (usually the larger) of the voltage source = 1.5 V
V₂ = The voltage of the other voltage source = 1.5 V
Therefore;
[tex]V_{(series \ opposing)}[/tex] = 1.5 V - 1.5 V = 0 V
The reading on the ammeter = The current in the circuit, 'I', which is given as follows;
V = I·R
∴ I = V/R = 0/R = 0
I = 0 A (ampere)
The reading on the ammeter = I = 0 A (Current cannot flow without the presence of a voltage).