Considering the patterns you have noticed in this activity, which statement best explains why a compound with the molecular formula CH3 doesn't exist in nature?
A. Hydrogen typically needs four bonds to reach a noble gas configuration.
B. Carbon needs more than just three bonds to reach a noble gas configuration. C. The chemical CH3 does not react with other substances because of its high stability.
D. CH3 has three double bonds, which fails to give it a noble gas configuration​

Answer:

############################

Explanation:

Answer:

Trioxocarbonate (iv) are salts derived from trioxocarbonate (iv) acid when it reacts with metals and metallic oxides. All trioxocarbonate (iv) salts of Sodium (Na), Potassium (K) and Ammonium(NH4+) are soluble while all others are insoluble.

Answer:

Zamir walked

27

meters and Talia walked

19

meters.

Explanation:

27 and 19

Answer:

zamir:27  Talia:19

Explanation:

i got it right on my test :)

Answer:

Tenacity describes the reaction of a mineral to stress such as crushing, bending, breaking, or tearing. ... The majority of all minerals are brittle. An example is Quartz. (Minerals that are not brittle may be referred to as Nonbrittle minerals.)

Answer:

Warm Water

Explanation:

In warm temperatures, cold-blooded animals are more active and can travel more quickly. This occurs because heat activated reactions provide energy to move muscles. In the absence of heat the animal becomes slow and sluggish. So they are usually inactive and rest when it is cold. As they do not need to feed much, they spend less time looking for food, so this life strategy works for them.

Brainliest?

Answer warm water Explanation:i have the same question

Answer:

D,B

Explanation:

there are 79 elements in gold

Answer:

23 Sandwiches

6 slices of bread

0 slices of cheese

Explanation:

brainliest pls:)

Answer:

None. Electrons are not in the nucleus.

Explanation:

We know that an atom consist of electrons, protons and neutrons. Neutrons and protons are present inside the nucleus while electrons are present out side the nucleus. Electron has a negative charge and is written as e⁻. The mass of electron is 9.10938356×10⁻³¹ Kg . While mass of proton and neutron is 1.672623×10⁻²⁷Kg and 1.674929×10⁻²⁷ Kg respectively.

Symbol of proton= P⁺  

Symbol of neutron= n⁰  

The number of electron or number of protons are called atomic number while mass number of an atom is sum of protons and neutrons. The umber of protons and electrons are always equal to make the atom electrically neutral .

The atom having atomic number 16 have 16 electrons and these electrons are present out side the nucleus.

Answer:

one more time

Explanation:

shpuld i go

Answer:

C

Explanation:

Answer:

I think is A

Explanation:

Hope it helps

Answer:

2.70 g of glucose.

Explanation:

The following data were obtained from the question:

Molarity of the glucose solution = 0.1 M

Volume of solution = 0.15 L

Molar mass of glucose = 180.16 g/mol

Mass of glucose =.?

Next, we shall determine the number of mole of glucose in the solution. This can be obtained as follow:

Molarity of the glucose solution = 0.1 M

Volume of solution = 0.15 L

Mole glucose =?

Molarity = mole /Volume

0.1 = Mole of glucose /0.15

Cross multiply

Mole of glucose = 0.1 × 0.15

Mole of glucose = 0.015 mole

Finally, we shall determine the mass of glucose in the solution as follow:

Mole of glucose = 0.015 mole

Molar mass of glucose = 180.16 g/mol

Mass of glucose =.?

Mole = mass /molar mass

0.015 = mass of glucose /180.16

Cross multiply

Mass of glucose = 0.015 × 180.16

Mass of glucose = 2.70 g

Therefore, the solution contains 2.70 g of glucose.

The grams that the solution must contain is :

- 2.70 g of glucose.

Given:

Molarity of the glucose solution = 0.1 M

Volume of solution = 0.15 L

Molar mass of glucose = 180.16 g/mole

Molarity of the glucose solution = 0.1 M

Volume of solution = 0.15 L

Molarity = mole /Volume

0.1 = Mole of glucose /0.15

Mole of glucose = 0.1 × 0.15

Mole of glucose = 0.015 mole

Mole of glucose = 0.015 mole

Molar mass of glucose = 180.16 g/mol

Mass of glucose =.?

Mole = mass /molar mass

0.015 = mass of glucose /180.16

Mass of glucose = 0.015 × 180.16

Mass of glucose = 2.70 g

The solution contains 2.70 g of glucose.

Learn more about "Mole":

https://brainly.com/question/1269011?referrer=searchResults

Answer:

A

Explanation:

its A

facts o.o

Nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.

Nuclear power plant is defined as a particular kind of power plant that produces electricity by nuclear fission. Nuclear power plants use the heat generated by nuclear fission to transform water into steam in a controlled environment, which then powers generators to produce electricity.  Low-enriched uranium fuel is used in nuclear power plants to generate electricity through a process known as fission, which involves breaking uranium atoms in a nuclear reactor.

A clean energy source with no emissions is nuclear. It produces energy by fission, which is the splitting of uranium atoms to release energy. Without the toxic consequences that come from burning fossil fuels, electricity is produced using the heat from fission to produce steam, which turns a turbine.

Thus, nuclear power plants pollute the environment and causes cancer in populations that use nuclear energy instead of traditional electricity. Hence option A is correct.

To learn more about nuclear power plant, refer to the link below:

https://brainly.com/question/424603

#SPJ2

Answer:

2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)

General Formulas and Concepts:

Explanation:

Step 1: RxN

HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + H₂O (l)

Step 2: Balance RxN

2HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + 2H₂O (l)

Step 3: Ionic Equations

Total Ionic Equation:

2H⁺ (aq) + 2NO₃⁻ (aq) + Ca²⁺ (aq) + 2OH⁻ (aq) → Ca²⁺ (aq) + 2NO₃⁻ (aq) + 2H₂O (l)

Cancel out spectator ions.

Net Ionic Equation:

2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)

if you just look up the answer it comes up btw!!

have a great day

Answer:

The correct option is the last option (Some dissolved solids may be nonelectrolytes)

Explanation:

Total dissolved solids (TDS) cannot be calculated by conductivity alone because conductivity involves ionic charges and there are solids that dissolve in water but do not carry ionic charges (and thus form non-electrolytes). Examples include sucrose (common sugar) and glucose. These two solids will dissolve in water but would not form ions that will carry ionic charges which are responsible for conductivity. Thus, if TDS only depends solely on conductivity, then a solution that contains dissolved sucrose will be wrongly accounted for as the sucrose will be omitted from the dissolved substances.

A valid reason why total dissolved solids (TDS) cannot be accurately

calculated by conductivity alone because some dissolved solids may be

non-electrolytes.

Conductivity means the ability of electric current to pass through a

substance and an electrolyte has a high conductivity when dissolved in

water.

Dissolved solids can't be measured by conductivity because not all

dissolved solids are electrolytes.

Read more on https://brainly.com/question/19457008

This quantity = 0.298 nanograms(ng)

Mass is one of the principal quantities, which is related to the matter in the object

The main mass unit consists of 7 units of other than other units of mass such as quintals, tons, pounds, ounces:

Kilogram, kg

Hectogram, hg

Decagram, dag

gram, g

Desigram, with

centigram, cg

milligram, mg

Each unit descends then multiplied by 10, and if one unit increases then divided by 10

Conversion of other mass units:

10⁻³ g ⇒mg-milligrams

10³ g ⇒kg-kilograms

10⁻⁶ g ⇒µg-micrograms (mcg)

10⁶ g ⇒Mg-megagrams (tons)

10⁻⁹ g ⇒ng-nanograms

10⁹ g ⇒Gg-gigagram

10⁻¹² g ⇒pg-pikogram

2.98 x 10⁻¹⁰ g to nanograms(ng)

[tex]\tt 2.98\times 10^{-10}\times 10^9=0.298~ng[/tex]

Answer:

alot of things

Explanation:

a. P=0.971 atm=737.6 mmHg

b. n=2.88 x 10⁻³

Dalton's law of partial pressures states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases

[tex]\tt P_T=P_1+P_2+..P_n[/tex]

A. vapor pressure of water at 22.5 = 20.4 mmHg

Pt=P H₂ + P H₂O

758 = P H₂ + 20.4

P H₂=737.6 mmHg=0.971 atm

B.Ideal gas Law = PV=nRT

P = 0.971 atm

V = 72 ml = 0.072 L

R = 0.082 L/atm mol

T = 22.5 + 273.15 =295.65

[tex]\tt n=\dfrac{0.971\times 0.072}{0.082\times 295.65}=2.88\times 10^{-3}[/tex]

The empirical formula : C₁₂H₁₇N₂O₄P

The empirical formula is the smallest comparison of atoms of compound =mole ratio of the components

The principle of determining empirical formula

[tex]\tt \dfrac{50.7}{12}=4.225[/tex]

[tex]\tt \dfrac{6.03}{1}=6.03[/tex]

[tex]\tt \dfrac{9.86}{14}=0.704[/tex]

[tex]\tt \dfrac{22.51}{16}=1.407[/tex]

[tex]\tt \dfrac{10.9}{31}=0.352[/tex]

Divide by the smallest mole ratio(0.352)

C : H : N : O : P

[tex]\tt C\rightarrow \dfrac{4.225}{0.352}=12[/tex]

[tex]\tt H\rightarrow \dfrac{6.03}{0.352}=17[/tex]

[tex]\tt N\rightarrow \dfrac{0.704}{0.352}=2[/tex]

[tex]\tt O\rightarrow \dfrac{1.407}{0.352}=4[/tex]

[tex]\tt P\rightarrow \dfrac{0.352}{0.352}=1[/tex]

Answer:

167 mL.

Explanation:

We'll begin by calculating the number of moles in 45 g of aluminum (Al). This can be obtained as follow:

Mass of Al = 45 g

Molar mass of Al = 27 g/mol

Mole of Al =?

Mole = mass /Molar mass

Mole of Al = 45/27

Mole of Al = 1.67 moles

Next, the balanced equation for the reaction. This is given below:

2Al + 3H2SO4 → Al2(SO4)3 + 3H2

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Next, we shall determine the number of mole of H2SO4 needed to react with 45 g (i.e 1.67 moles) of Al. This can be obtained as:

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Therefore, 1.67 moles of Al will react with = (1.67 × 3)/2 = 2.505 moles of H2SO4.

Thus 2.505 moles of H2SO4 is needed for the reaction.

Next, we shall determine the volume of H2SO4 needed for the reaction. This can be obtained as follow:

Molarity of H2SO4 = 15.0 M

Mole of H2SO4 = 2.505 moles

Volume =?

Molarity = mole /Volume

15 = 2.505 / volume

Cross multiply

15 × volume = 2.505

Divide both side by 15

Volume = 2.505/15

Volume = 0.167 L

Finally, we shall convert 0.167 L to mL. This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.167 L = 0.167 L × 1000 mL / 1 L

0.167 L = 167 mL

Thus, 0.167 L is equivalent to 167 mL.

Therefore, 167 mL H2SO4 is needed for the reaction.

J.J. Thomson's plum pudding model of the atom followed the discovery of negatively charged particles with a very small mass. Thus, the correct option for this question is A.

J.J. Thomson was a British physicist who discovered sub-atomic particles known as electrons within an atom. He also announced that atoms are made up of smaller components.

The plum pudding model is defined by Thomson in order to demonstrate that negatively charged sub-atomic particles known as electrons are surrounded by a volume of positively charged particles known as protons. It is one of the historical scientific model of the atom that governs all sorts of properties of sub-atomic particles.

Therefore, "negatively charged particles with a very small mass" is the discovery that follows J.J. Thomson's plum pudding model of the atom. Thus, the correct option for this question is A.

To learn more about the Plum pudding model, refer to the link:

https://brainly.com/question/4839193

#SPJ2

Answer:

The wavelength of the energy that needs to be absorbed  = 52.36 nm

Explanation:

For this study;

Let consider the Rydgberg equation from Bohr's theory of atomic model:

i.e.

[tex]\dfrac{1}{\lambda} = R_H (Z^*)^2( \dfrac{1}{n_1^2}-\dfrac{1}{n_2^2})[/tex]

where

Z* = effective nuclear charge of atom = Z - σ = 6

n₁ = lower orbit = 3

n₂ = higher orbit = 4

[tex]R_H[/tex] = Rydyberg constant = 1.09 × 10⁷ m⁻¹

λ = wave length of the light absorbed

∴

[tex]\dfrac{1}{\lambda} = 1.09 \times 10^7}(6)^2( \dfrac{1}{3^2}-\dfrac{1}{4^2})[/tex]

[tex]\dfrac{1}{\lambda} = 1.09 \times 10^7}(36)( \dfrac{1}{9}-\dfrac{1}{16})[/tex]

[tex]\dfrac{1}{\lambda} = 392400000\times0.0486111111[/tex]

[tex]\dfrac{1}{\lambda} =19075000[/tex]

[tex]\lambda = \dfrac{1}{19075000}[/tex]

[tex]\lambda = \dfrac{1}{1.91\times 10^7 \ m^{-1}}[/tex]

[tex]\lambda = 5.236 \times 10^{-8} m[/tex]

[tex]\lambda = 52.36 \times 10^{-9} m[/tex]

[tex]\lambda = 52.36\ n m[/tex]

Therefore, the wavelength of the energy that needs to be absorbed  = 52.36 nm

Answer:

idek akxkkwskkd nwkdkekekd

Answer:

D. Thermal energy increases as the atoms and molecules in a system move more.

Explanation:

Thermal energy is a form of kinetic energy possessed by molecules of a system. The measure of this kinetic energy in an atom is called heat.

The average kinetic energy of a system is the temperature.

Answer:

Gneiss forms by regional metamorphism from both high temperature and pressure. Quartzite and marble are the most commonly used metamorphic rocks.

Answer:

Copper, a metal known since ancient times, is used in electrical cables and pennies, among other things. ... Calculate the average atomic mass of copper. ... The atomic masses of the two stable isotopes of boron 10B (19.78%) and 11B (80.22%) are 10.0129 amu ... (.1978)(10.0129 amu) + (.8022)(11.0093 amu) =10.81 amu.

Explanation:

I hope I help :)

Answer:

is highly respect is correct I promise!