The conjugate acid : H₂CO₃
Further explanationGiven
Reaction
HCO₃− + H₂S → H₂CO₃ + HS−
Required
The conjugate acid
Solution
Bronsted-Lowry
Acid ⇒ H⁺ + conjugate base
Bases + H⁺⇒ conjugate acids
Acid and conjugate base : H₂S and HS−
Base and conjugate acid : HCO₃− and H₂CO₃
H₂S gives (H⁺), then the remaining acid is a conjugate base HS−
HCO₃− receives (H +), then the conjugate acid H₂CO₃
Answer:
The correct answer is D.
Explanation:
Edge'21
flourine is more reactive than chlorine . why ? with short reason.
Answer:
Electronegativity is probably the biggest thing that plays into reactivity. Therefore, since fluorine has a higher electronegativity than chlorine, fluorine is more reactive.
Explanation:
I got it right
How would a long period without sunlight affect the food web? PLEZZ HELP MEH IF YOU WANT BRAINEIST AND LIKE COMMENTED
It would cause consumers to consume more food.
It would have no effect on the food web.
It would stop decomposers from breaking down matter.
It would stop producers from producing food.
Answer:
im pretty sure its the last one
Explanation:
if plants dont have sun light they will die because the sunlight gives them the nutrients to survive
If 10.88 moles of NH3 were produced, how many moles of N2 would be
required?
Answer:
5.44 moles of nitrogen required.
Explanation:
Given data:
Number of moles of NH₃ = 10.88 mol
Moles of N₂ required = ?
Solution:
Chemical equation:
N₂ + 3H₂ → 2NH₃
Now we will compare the moles nitrogen and hydrogen.
NH₃ : N₂
2 : 1
10.88 : 1/2×10.88 = 5.44mol
5.44 moles of nitrogen required.
3. What do you notice about the temperature of the substance in the test tube after it is placed in the beaker of water?
A)The temperature of the substance remains the same as it sits in the beaker of water.
B) The temperature of the substance decreases as it sits in the beaker of water.
C) The temperature of the substance increases as it sits in the beaker of water.
Answer:
C: The temperature of the substance increases as it sits in the beaker of water
Explanation:
This question was taken from a video where an attempt was made to investigate the changes in temperature when a substance undergoes change from it's solid phase to its liquid phase.
To do this, as seen in the video online, it shows a solid substance in a test tube being placed in a beaker of water.
From observation, the water in the beaker has a warmer temperature than the solid substance present in the test tube and this in turn makes the test tube gradually increase in temperature.
Thus, the solid substance will as well increase increase in temperature when it is placed in the beaker of water.
Will give brainliest
what is the mass of 8.07 x 10^24 molecules of 02?
Answer:Avogadro's number 6.02 x 10^23 of O2 molecules has a mass of 32 gm (atomic weight of O = 16 gm, 2 x 16 = 32).
Explanation:pls brainless
Atoms are stationary and don't move when in solid form.
False
True
Answer:
True? The don't stay exactly still i dont think, but i'd say true.
Explanation:
Answer:
TRUE
Explanation:
In a solid, atoms are packed tightly together and move very slowly. In fact, they do not flow at all: they simply vibrate back and forth.
Key words vibrate, not movement.
Correct me if I'm wrong of course
1pt Copper chloride and aluminum react to produce
aluminum chloride and copper. Which of the
following is the correctly balanced chemical
equation for this reaction?
O A. CuCl, + Al -> AICI, + u
O B. 3CuCl, + Al -> AlCl, + 2Cu
OC. 3CUCI, + 2Al -> 2AICI, + 3Cu
OD. CuCl, + 3Al -> AICI, + 2Cu
Answer:
None of the above
but it must be:
for Copper(I)chloride
3CuCl + Al ==> AlCl3 + 3Cu
for Copper (II) chloride
3CuCl2 + 2Al ==> 2AlCl3 + 3Cu
4. On the island of Hawaii, Keanu notices that the sand on the beach is black, the same color as the
rock formations on the island. Keanu realizes the sand used to be part of the rock formations. How
did material from the rock formations turn into sand?
Answer:
The ricks were degraded over time by wind and water and were crushed down into tiny, smaller rocks, which is sand.
Explanation:
This is my first answer sorry im not that smart
Why milk sours is chemical change ?
Answer:
Explanation:
So chemical changes require a change on a molecular level that cannot be reversed because they form some new substance. Souring milk is not something you can reverse, and the process of it souring produces new molecules.
Plsss name this compound
Explanation:
It looks like 2,2,4-trimethylpentane.
Longest alkane chain contains 5 carbons. => -pentane
3 methyl groups on the 2nd, 2nd and 4th carbons.
One mole of a substance has a different number of particles as one mole of another substance.
O True
O False
Which of the following is a radioactive element?Sodium, Fluorine,Oxygen
francium
Answer:
Fluorine
Explanation:
These particles stick in the atoms and make them radioactive.
Draw both the chair and boat conformation of 1,4-dimethylcyclohexane with the methyl groups as cis and trans for both conformations. Label your molecules for cis and trans. Tell which is the highest in energy.
Answer:
Boat conformation cis 1,4-dimethyl cyclohexane has the highest energy.
Explanation:
From the conformations, the boat conformation cis 1,4-dimethyl cyclohexane is least stable due to the fact that two methyl groups are located in opposite direction to each other, this leads to the production of a higher strain. Similarly, Chair conformations appear more stable than boat conformation. Hence, energy is inversely proportional to stability. As a result of the aforementioned, boat conformation cis 1,4-dimethyl cyclohexane has the highest energy.
Number of atoms in 4.5 moles of Au?
A compound is found to contain 2.270 % hydrogen, 34.80 % phosphorus, and 62.93 % oxygen by mass. What is the empirical formula for this compound
Answer: The empirical formula is [tex]H_4P_2O_7[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of H= 2.270 g
Mass of P = 34.80 g
Mass of O = 62.93 g
Step 1 : convert given masses into moles
Moles of H = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{2.270g}{1g/mol}=2.270[/tex]
Moles of P = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{34.80g}{31g/mol}=1.122[/tex]
Moles of O = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{62.93g}{16g/mol}=3.933[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For H = [tex]\frac{2.270}{1.122}=2[/tex]
For P= [tex]\frac{1.122}{1.122}=1[/tex]
For O = [tex]\frac{3.933}{1.122}=3.5[/tex]
The simples ratio will be = H: P : O= 4: 2: 7
Hence the empirical formula is [tex]H_4P_2O_7[/tex]
2. Explain Why would it be difficult to find the volume of a rock using
a ruler?
Answer:
Most of these rocks are not made up of common geometric shapes
Explanation:
Because most rocks are not made up of common geometric shapes, it would be difficult or impossible to find the volume of a rock using a ruler; there would be no easy way to measure the rock's volume using a ruler
Hope this helped!
A 52 gram sample of an unknown metal requires 714 Joules of energy to heat it from
30.5◦C to 82◦C. What is the specific heat of
this metal?
Answer in units of J/g ·
◦ C.
Answer: Approximately [tex]0.267 \frac{\text{J}}{\text{g}^{\circ}\text{C}}[/tex]
===================================================
Work Shown:
We have the following variables
Q = 714 joules = heat requiredm = 52 grams = massc = specific heat = unknown[tex]\Delta t[/tex] = 82-30.5 = 51.5 = change in temperaturenote: the symbol [tex]\Delta[/tex] is the uppercase Greek letter delta. It represents the difference or change in a value.
Apply those values into the formula below. Solve for c.
[tex]Q = m*c*\Delta t\\\\714 = 52*c*51.5\\\\714 = 52*51.5*c\\\\714 = 2678*c\\\\2678*c = 714\\\\c = \frac{714}{2678}\\\\c \approx 0.26661687826737\\\\c \approx 0.267\\\\[/tex]
The specific heat of the unknown metal is roughly [tex]0.267 \frac{\text{J}}{\text{g}^{\circ}\text{C}}[/tex]
QUESTION 3
Identify the number that has 3 significant figures.
O A. 100
OB. 12.0
O C. 120
OD. 123.00
Answer:
D
Explanation:
pleaseee help thank youu
Answer:
i just took it the answers is C
Explanation:
What is the molar mass of magnesium sulfate, MgSO4?
Answer:
120.37 g/mol is the molar mass of magnesium sulfate
PLEASE HELP ASAPPPP I WILL VENMO YOU MONEY IF YOU DO THIS CORRECTLY Write the name for the following compounds.
1. N2O (Covalent)
2. Cu2S (Ionic)
Write the Chemical Formula for the following compounds.
3. Dichlorine heptoxide (Covalent)
4. Magnesium bromide (lonic)
Answer:
Dichlorine heptoxide=Cl₂O₇
magnesium bromide=MgBr2
Explanation:
what type of molecule are these and what is the strongest IMFs in between?
Answer:
CH2O is formaldehyde a covalent compound and its intermolecular forces are week
KCl is an ionic compound formed by electrostatic force of attraction between positive and negative charge. Ionic compounds also exists in three dimensional crystal lattic that is why intermolecular forces in KCl is stronger.
Moreover melting point of KCl is higher than CH2O
Explanation:
what does (I) means in a chemical equation
Answer:
the l sign means the substance in the chemical equation is a liquid. (hope this helped : D )
Will the composition of water molecules vary depending on their source?
Answer:
It does not matter where the sample of water came from or how it was prepared. Its composition, like that of every other compound, is fixed.
What is the correct formula to determine density?
Answer:
density =mass/volume
Explanation:
p=m/v
p means raw
m means mass
v means volume.
please helpppppppppp
Answer:
Environmental factors such as diet, temperature, oxygen levels, humidity, light cycles
And the presence of mutagens can all impact which of an animal's genes are expressed, which ultimately affects the animal's phenotype.
Describe the process of freezing ice cream in terms of heat flow.
Answer:
Freezing the mix is one of the most important operations in making ice cream, for upon it depend the quality, palatability, and yield of the finished product. Typically, freezing of ice cream is accomplished in two steps: (1) dynamic freezing, where the mix is frozen quickly while being agitated to incorporate air and to limit the size of ice crystals formed; and (2) static freezing, where the partially frozen product is hardened without agitation in a special low-temperature environment designed to remove heat rapidly. Although these steps primarily encompass freezing, or the formation of ice crystals, there are several other important processes that take place during this time that significantly impact the quality of ice cream. Both the dispersion of air bubbles and rearrangement of fat globules occur during the freezing steps.
Explanation:
Which action is necessary for a solar eclipse to occur?
Answer:
Moon has to be in-between the Earth and the Sun.
2. Moon's umbra should sweep your place.
3. Latitude and longitude of your place should be within the befitting limits.
Which chemical equations show a precipitation reaction?
Select all the correct answers.
2NaNO3(aq) + NiCl2(aq) → 2NaCl(aq) + Ni(NO3)2(aq)
MgSO4(aq) + CaCl2(aq) → MgCl2(aq) + CaSO4(s)
AlBr3(aq) + 3LiI(aq) → AlI3(aq) + 3LiBr(aq)
FeCl2(aq) + Na2CO3(aq) → FeCO3(s) + 2NaCl(aq)
2AgNO3(aq) + Na2S(aq) → Ag2S(s) + 2NaNO3(aq)
The equations that show a precipitation reaction would be [tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex], [tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex], and [tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex]
What is a precipitation reaction?It is a reaction in which two soluble salts react in aqueous solutions to form one soluble and one insoluble salt.
Thus, all the equations with an insoluble salt as one of the products will qualify as precipitation reactions. The insoluble is designated as (s).
Hence, the following are precipitation reactions:
[tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex][tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex][tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex]More on precipitation reactions can be found here: https://brainly.com/question/24158764
#SPJ2