Answer:
the CG would move toward the rear.
Explanation:
Adding a paper clip to the vertical stabilizer of your glider will, the CG would move toward the rear. The correct option is A.
What is center of gravity?The place on an item where the force of gravity is thought to act is known as the center of gravity (CG).
The gravitational pull is thought to be focused at the point where an object weighs on average. Depending on the object's size, shape, and mass distribution, the center of gravity will be in one place or another.
The impact of adding a paper clip to your glider's vertical stabilizer is to shift the center of gravity (CG) to the back of the glider.
This is due to the fact that the paper clip adds weight to the glider's rear, moving the center of mass there and, as a result, the center of gravity.
Thus, the correct option is A.
For more details regarding center of gravity, visit:
https://brainly.com/question/20662119
#SPJ6
sadfsdfsdfasdfsafdsafaf
Finish the program to compute how many gallons of paint are needed to cover the given square feet of walls. Assume 1 gallon can cover 350.0 square feet. So gallons = the square feet divided by 350.0. If the input is 250.0, the output should be:
0.714285714286
Answer:
gallons_paint = wall_area / 350.0
Explanation:
So gallons = the square feet divided by 350.0:
So gallons = gallons_paint
the square feet = wall_area
then divide by 350.0
the whole thing:
wall_area = float(input())
# Assign gallons_paint below
gallons_paint = wall_area / 350.0
print(gallons_paint)
The program to compute how many gallons of paints are needed to cover the given square feet's of walls is as follows:
def square_feet_to_gallons(area):
gallons = area / 350
return gallons
print(square_feet_to_gallons(250))
1 gallon covers 350 square feet.
Therefore, gallons = area / 350
The user inputs is the area in square feet. Then the output should be the number of gallons.
The code explanation python.We declared a function named square_feet_to_gallons and the argument is area.
Then we declared a variable and assigned the mathematical operation area/350 to it.
Then we return the gallons.
Finally, we call the function with a print statement.
learn more on programming here:https://brainly.com/question/14469650?referrer=searchResults
In which type of network will a problem with one computer crash the network?
mesh
ring
star
bus
Answer:
Probably a mesh since they daisy chain off one another. If one in the middle crashes, there is a disconnect of all the ones following it.
Answer:
bus + ring
Explanation:
edge 2021 :)
Differentiate between Calling and Called program?
Answer:
The program name in CALL statement called as CALLED program/Sub program. A program can contain as many CALLs required and no restriction on it. In other words, CALLING program can CALL as many subprograms required. CALLED may not have the CALL statement to call another program.
Explanation:
Assuming dataFile is an ofstream object associated with a disk file named payroll.dat, which of the following statements would write the value of the salary variable to the file
A) cout <
B) ofstream
C) dataFile << salary;
D) payroll.dat <
Answer:
dataFile << salary;
Explanation:
To write salary to a file (payroll.dat) using ofstream, you make use of the following instruction:
ofstream dataFile;
myfile.open ("payroll.dat");
myfile <<salary;
myfile.close();
This line creates an instance of ofstream
ofstream dataFile;
This line opens the file payroll.dat
myfile.open ("payroll.dat");
This is where the exact instruction in the question is done. This writes the value of salary to payroll.dat
myfile <<salary;
This closes the opened file
myfile.close();
Lesson 3 - Calling All Operators
Exit
37 of 42
Test
Reset
order
75
do
create variable amount ToCoupon
75 +
order
print
"To receive a coupon, you will need to spend $ >
amount ToCoupon
print
Code
Check the customer's order amount. If it is less than $75, determine how much more
needs to be spent to reach $75 and give the customer that information.
< PREV
Answer:
.m
Explanation:
what time is spellrd the same forwards and backwards
The tool chest for programmers is also known as the CPU.
True or False?
Explanation:
I would say yes, but I'm not sure
At Moore High, 456 students attended the prom. This is 65 more students than
the previous year.
To the nearest percent, what is the percent of increase from last year to this
year?
12%
15%
17%
19%
Answer:
B-15%
Explanation:
Most Information Technology careers require workers to perform their jobs in
A. a home office.
B. a business office.
C. a secure office.
D. an off-site office.
Answer:
b on edge 2020
Explanation:
Answer:
b
Explanation:
Which of the following is not a form of technology?
A) computer
B) ketchup
C) pencil
D) umbrella
Answer:
ketchup because all of the others are objects with certain creative functions but ketchup is just K e t c h u p.
DRAG DROP -A manager calls upon a tester to assist with diagnosing an issue within the following Python script:#!/usr/bin/pythons = "Administrator"The tester suspects it is an issue with string slicing and manipulation. Analyze the following code segment and drag and drop the correct output for each string manipulation to its corresponding code segment. Options may be used once or not at all.Select and Place:
Answer:
The output is to the given question is:
nist
nsrt
imdA
strat
Explanation:
The missing code can be defined as follows:
code:
s = "Administrator" #defining a variable that hold string value
print(s[4:8])#using slicing with the print method
print(s[4: 12:2])#using slicing with the print method
print(s[3::-1])#using slicing with the print method
print(s[-7:-2])#using slicing with the print method
In the above code, a string variable s is declared, that holds a string value, and use the multiple print method to print its slicing calculated value.
When defining a class, it is a best practice to declare ____ as private. constructors mutators nothing should be private accessors variables
Answer:
The answer is "variables".
Explanation:
It is necessary to declare a variable privately when declaring a class because the private variable 'protects' the code while it is in operation. It may not aim to protect it at this stage from changing the codes themselves for other developers. Its purpose of the so-called "data hiding" is to hold the internal data from many other classes using the class protected.
HELP AASAP BRAINLIEST JUST HELP
Answer:
d
Explanation:
plz brainliest
If you wanted to help your phone , a nonliving thing , perform the process of life which is to gain energy which would be the best description of what to do ?
Help
Answer:
d. plug it into the charger.
Explanation:
var nums = [1,1, 2, 3, 5, 8, 13, 21];
var copyNums = [1,1, 2, 3, 5, 8, 13, 21];
for(var i=0; i < copyNums.length; i++){
if(copyNums[i] == 1){
insertItem(copyNums,i,"hello");
}
}
This code will create an infinite loop. Why does it create an infinite loop?
Answer:
Explanation:
This code creates an infinite loop because it is detecting that the first value of copyNums is 1, therefore it runs the insertItem code. This code then adds the value "hello" to the array in position i which would be 0. Then moves to the next value of the array, but since the element "hello" pushed the value 1 to the next index then the code just repeats itself with the same value of 1. This continues to happen because every time the value "hello" is added it simply pushes the 1 to the next index and repeats the same code.
Answer:
[tex]var nums = [1,1, 2, 3, 5, 8, 13, 21];
var copyNums = [1,1, 2, 3, 5, 8, 13, 21];
for(var i=0; i < copyNums.length; i++){
if(copyNums[i] == 1){
insertItem(copyNums,i,"hello");
}
}[/tex]
How do we use game maker?
Answer:
The easy to use powerful game engine that is the best for 2D games
III. FILL-IN THE BLANK (five points each)
11. Open divided scales have scales going in
directions.
12. There are
groups of scales.
13. The open divided scales have an
unit preceding zero.
14. The triangular scale can have up to
different scales on one piece of plastic.
15. The mechanical inch is divided into
equal parts.
6.2 lesson practice
Answer:
I am guessing it would be 20
Explanation:
In the draw canvas text code the last number from the color is probably the font size.
Correct me if I'm wrong
ve phenotypk percentages of the offspring
Social media marketing began in the mid
1970s
1980s
1990s
2000s
Answer:
1990's i think
Explanation:
Completing an algorithm means stating the ____ of an algorithm.
(Fill in the blank pls)
WARNING! pls don't do it if you don't want to do it, Don't put an answer that doesn't have anything to do with the question If you do I'll report you full stop!
The reward for answering and correctly :
I will give you the brainiest answer, Mark 5 star, send thanks, put a nice comment and don't forget the points as well!!! ( remember only if it's right!)
THANKS SO MUCH TO ALL!!!
Answer:
procedures for calculation
Boolean, integer, string, and float are examples of:
constants.
recursions.
loops.
variables.
Answer:
variables
Explanation:
Conside following prototype of a function
int minArray(int [], int );
Which of the option is correct way of function CALL assuming following arraydeclaration
int x[5] = {7,4,6,2,3};*
a) minArray(x,5);
b) minArray(x[],10);
c) minArray(x[5],5);
d) minArray(5,x);
Answer:
The answer is "Option a"
Explanation:
Following are the code to this question:
#include <stdio.h>//header file
int minArray(int x[], int n)//defining method minArray that accepts two parameters
{
for(int i=0;i<n;i++)//defining loop for print value
{
printf("%d\n",x[i]);//printf array value
}
}
int main()//defining main method
{
int x[] ={7,4,6,2,3};//defining array that hold values
int n=5;//defining integer variable
minArray(x,5);//calling method minArray
return 0;
}
In this code, a method "minArray" is defined, that accepts two parameters array and an integer variable in its parameter, and in the next step, the for loop is declared, that uses the print method to prints its value.
In the next step, the main method is declared, which declared an array and holds its values and defines an integer variables, and calls the method "minArray".
The Circle and CircleTester have been created, but they have errors. The public and private settings for variables and methods are not all correct.
Your job is to go through and fix them. You will need to make edits in both files to get them working correctly, but once complete, your output should match the output below.
Sample Output:
Circle with a radius of 5.0
The diameter is 10.0
The perimeter is 31.41592653589793
CIRCLE.JAVA
public class Circle {
public double radius;
private Circle(double myRadius) {
radius = myRadius;
private void setRadius(int myRadius){
radius = myRadius;
}
private double getDiameter() {
return radius*2;
}
public double getRadius() {
return radius;
}
private double getPerimeter() {
return Math.PI*getDiameter();
}
private String toString() {
return "Circle with a radius of " + radius;
}
}
CIRCLE TESTER.JAVA
public class CircleTester {
public static void main(String[] args) {
Circle circ = new Circle(10);
circ.radius = 5;
System.out.println(circ);
System.out.println("The diameter is " + circ.getDiameter());
System.out.println("The perimeter is " + circ.getPerimeter())
}
}
Answer:
CIRCLE.JAVA
public class Circle {
private double radius;
public Circle(double myRadius) {
radius = myRadius;
private void setRadius(int myRadius){
radius = myRadius;
}
public double getDiameter() {
return radius*2;
}
public double getRadius() {
return radius;
}
public double getPerimeter() {
return Math.PI*getDiameter();
}
public String toString() {
return "Circle with a radius of " + radius;
}
}
CIRCLE TESTER.JAVA
public class CircleTester {
public static void main(String[] args) {
Circle circ = new Circle(10);
circ.radius = 5;
System.out.println(circ);
System.out.println("The diameter is " + circ.getDiameter());
System.out.println("The perimeter is " + circ.getPerimeter())
}
}
Explanation:
public class Circle {
//This could be made private or public.
//Making it private is better
private double radius;
//This is a constructor. It should be made public
//since it would most likely be used in another class
//to create an object of this class.
//Making it private means no other external class can create
//an object of this class.
//Since the tester class (CIRCLETESTER.java), as shown on line 3,
// needs to create
//an object of this class, this should be made public
public Circle(double myRadius) {
radius = myRadius;
private void setRadius(int myRadius){
radius = myRadius;
}
//This should be made public since it will be
// used in another class (CIRCLETESTER.java in this case)
public double getDiameter() {
return radius*2;
}
public double getRadius() {
return radius;
}
//This should be made public since it will be
//used in another class (CIRCLETESTER.java)
public double getPerimeter() {
return Math.PI*getDiameter();
}
//The toString() method is the string representation
//of an object and is called when there is an attempt to
//print the object. It should be made public since it will
//be used in another class (CIRCLETESTER.java)
public String toString() {
return "Circle with a radius of " + radius;
}
}
CIRCLE TESTER.JAVA
public class CircleTester {
public static void main(String[] args) {
Circle circ = new Circle(10);
circ.radius = 5;
System.out.println(circ);
System.out.println("The diameter is " + circ.getDiameter());
System.out.println("The perimeter is " + circ.getPerimeter())
}
}
Intrusion Detection System (IDS) is a security mechanism that detects unauthorized user activities, attacks, and network compromises.
a. True
b. False
Answer: True
Explanation:
The Intrusion Detection System (IDS) is used for the detection of malicious activities and thus is done by monitoring if the network communications and also the examination of systems logs.
When something looks suspicious of fishy, the Intrusion Detection System scans such thing out. When violations of policy occurs, the Intrusion Detection System is at alert to notice.
Therefore, the answer to the statement in the question is true.
Type a statement using srand() to seed random number generation using variable seedVal. Then type two statements using rand() to print two random integers between (and including) 0 and 9. End with a newline. Ex:
5.
7.
Note: For this activity, using one statement may yield different output (due to the compiler calling rand() in a different order). Use two statements for this activity. Also, after calling srand() once, do not call srand() again. (Notes)
1 #include
2 #include //
3 Enables use of rand ()
4 int main(void) ( int seedval;
6.
7. scanf ("%d", &seedval);
8.
9.
10 srand(int seedval);
11 printf("%d\n", srand());
12 printf("%d\n", srand());
13
14 return e;
15 }
Answer:
#include<stdio.h>
#include<stdlib.h>
int main(void){
int seedval;
scanf ("%d", &seedval);
srand(seedval);
printf("%d\n", rand()%10);
printf("%d\n", rand()%10);
return 0;
}
Explanation:
The given code is poorly formatted. So, I picked what is usable from the code to write the following lines of code:
#include<stdio.h>
#include<stdlib.h>
int main(void){
This line declares seedval as integer
int seedval;
This line gets user input for seedval
scanf ("%d", &seedval);
This line calls the srand function to generate random numbers
srand(seedval);
This prints a random number between 0 and 9
printf("%d\n", rand()%10);
This also prints a random number between 0 and 9
printf("%d\n", rand()%10);
return 0;
}
If you are working in a word-processing program and need to learn about its features, the best place to get assistants is from the ________.
A. application's help menu
B. desktop
C. toolbar
D. start menu
Answer:
A
Explanation:
plz mark me brainlies
Answer:
A. Application's help menu
Explanation:
Any1??
Write the names of atleast 22 high-level programming languages
Answer:
1 Array languages
2 Assembly languages
3 Authoring languages
4 Constraint programming languages
5 Command line interface languages
6 Compiled languages
7 Concurrent languages
8 Curly-bracket languages
9 Dataflow languages
10 Data-oriented languages
11 Decision table languages
12 Declarative languages
13 Embeddable languages
13.1 In source code
13.1.1 Server side
13.1.2 Client side
13.2 In object code
14 Educational languages
15 Esoteric languages
16 Extension languages
17 Fourth-generation languages
18 Functional languages
18.1 Pure
18.2 Impure
19 Hardware description languages
19.1 HDLs for analog circuit design
19.2 HDLs for digital circuit design
20 Imperative languages
21 Interactive mode languages
22 Interpreted languages
23 Iterative languages
Explanation:
write down the name of output devices
Answer:
Monitor
Printer
Headphones
Computer Speakers
Projector
GPS
Sound Card
Video card
Explanation:
monitor
printer
headphones
computer speakers
projector
GPS
sound card
video card
hope it helps you
plese follow me