Answer:
V2= 1.03L
Explanation:
Start off with what you are given.
V^1: 1.00L
T^1: 23°C
V^2?
T^2: 33°C
If you know your gas laws, you have to utilise a certain gas law called Charles' Law:
V^1/T^1 = V^2/T^2
Remember to convert Celsius values to Kelvin whenever you are dealing with gas problems. This can be done by adding 273 to whatever value in Celsius you have.
(23+273 = 296) (33+273 = 306)
Multiply crisscross
1.00/296= V^2/306
296V^2 = 306
Dividing both sides by 296 to isolate V2, we get
306/296 = 1.0337837837837837837837837837838
V2= 1.03L
Danielle is designing a system to help race cars slow safely and rapidly at her local racetrack. The racetrack is a straight, 1,000-meter stretch of asphalt. Half of the track is devoted to races and the other half is designed to let cars decelerate after crossing the finish line.
Danielle has designed a pair of small parachutes that are automatically released out the back of a car once it crosses the finish line. When her system works properly, the race car driver does not need to apply the brakes to bring the car to a stop before running out of track.
When Danielle tests a prototype of her design, it brings a race car to a stop 275 meters behind the finish line. After taking some measurements, she decides that her design causes the driver to experience too much force. To correct this, she could
A.
make the parachutes larger in order to increase the drag forces on the car and bring it to a stop 200 meters after crossing the finish line.
B.
add a third parachute in order to increase the drag forces on the car and bring it to a stop 175 meters after crossing the finish line.
C.
make the parachutes smaller in order to decrease the drag forces on the car and bring it to a stop 400 meters after crossing the finish line.
D.
remove one of the parachutes in order to decrease the drag forces on the car and bring it to a stop 550 meters after crossing the finish line.
Answer:
The answer is C
Explanation:
She should make the parachutes smaller in order to decrease the drag forces on the car and bring it to a stop 400 meters after crossing the finish line.
nitrophenol is more acidic than phenol.
Answer:
The p- nitrophenol is more acidic than phenol because the deactivating nature of nitro group and after loosing the protons it makes more resonance stabilization as nitro group is having strong deactivating nature so it attracts electrons towards it.
where do coal,oil and natural gas came from?
Answer:
I hope it will help you
plz mark me as brainliest
plz thank my answer
What is an oceanographer likely to find in a typical sample of salt water from the
ocean floor?
Water with high salt content, low in temperature, and low in density.
Water with average salt content, high in temperature, and high in density.
Water with high salt content, high in temperature, and high in density.
Water with high salt content, low in temperature, and high in density.
Explanation:
the oceanographic is likely to find water with high salt content, low in temperature and high in density
Water with high salt content, low in temperature, and high in density likely to find in a typical sample of salt water from the ocean floor. Therefore, the correct option is option D.
What is an oceanography?Oceanography, also known as oceanology as well as ocean science, is indeed the scientific paper of the seas. The term is derived from the Ancient Greek words "ocean" (v) and "writing" (graph), respectively.
Geophysical fluid dynamics, plate tectonics, the geology of the ocean floor, and fluxes of different chemical compounds and physical qualities both inside and across the ocean are all factors that affect waves and ocean currents. Water with high salt content, low in temperature, and high in density likely to find in a typical sample of salt water from the ocean floor.
Therefore, the correct option is option D.
To know more about oceanography, here:
https://brainly.com/question/13276902
#SPJ5
a)
Name the following compounds
CH, -CH-CH
(i)
CH, Br
-
Answer:
methyl, ethyl,
Explanation:
that should be the case
What is the solar radius of a main sequence star?
Answer:I'm going to give some fictitious values just so that we can get some perspective on the matter.
Let's say that the surface temperature of our sun is 10, the surface temp of the bigger star- the red giant formed from leaving the main sequence, has a temp of 0.2. of that- 2.
We can also say that the radius of our sun is 10, and the radius of the red giant is 1000. (100 times more)
Using the equation:
L
=
σ
A
T
4
σ
= The Stefan-Boltzmann constant =
5.67
×
10
−
8
But we can ignore the constant, as we are only interested in a ratio of these values.
L
S
u
n
=
4
π
(
10
)
2
×
10
4
=
1.26
×
10
7
L
S
t
a
r
=
4
π
(
1000
)
2
×
2
4
≈
2.01
×
10
8
2.01
×
10
8
1.26
×
10
8
≈
16
So the newly formed, red giant star is almost 16 times more luminous than the sun. This is owing to the increased surface area of the star due to the massively increased radius.
A small sidenote:
There is an equation that might be useful for comparing the radii, temperature and luminosity of main sequence stars. As red giants are not on the main sequence it could not be used here, but if you stumble across a question where they ask you to find the radius, luminosity or temperature given the other two, you can relate it to the sun's characteristics:
r
s
t
a
r
r
s
u
n
=
√
L
s
t
a
r
L
s
u
n
×
(
T
s
u
n
T
s
t
a
r
)
2
(I know, it's not a beauty to look at- but it works)
Where
X
s
u
n
is the radius, temperature, and luminosity of the sun. These are not often given in numerical values, but this equation serves well when asked to find e.g the radius of a star, in solar radii given that a star is twice as luminous and has 5 times the temperature of that of the sun.
Hence:
T
s
t
a
r
=
5
T
s
u
n
L
s
t
a
r
=
2
L
s
u
n
r
s
t
a
r
r
s
u
n
=
√
2
L
s
u
n
L
s
u
n
×
(
T
s
u
n
5
T
s
u
n
)
2
(cancel the common terms)
r
s
t
a
r
r
s
u
n
=
√
2
×
(
1
5
)
2
r
s
t
a
r
≈
0.057
r
s
u
n
(divide both sides by 0.0057)
17.5
r
s
t
a
r
≈
r
s
u
n
So the star's radius is almost 17.5 times that of the sun.
Hopefully, you find this info useful!
Explanation:
In the periodic table what is the 65th element? (pls help me)
Answer:
Terbium
Explanation:
All elements are put in squares on the periodic table. They represent the number of protons in the nucleus. They are the largest number in the square. The elements go up in order. Number 65 is in the row following Calcium. It is about in the middle of that row.The law that states when different compounds are formed by a combination of the same elements, different masses of one element combine with the same fixed to other elment
Answer:
The law of multiple proportions states that whenever the same two elements form more than one compound, the different masses of one element that combine with the same mass of the other element are in the ratio of small whole numbers.
Which statement correctly describes atoms? *
-Atoms combine to make all the substances on Earth.
-Atoms of all substances have the same chemical properties.
-Atoms are easily destroyed when matter is cooled or heated.
-Atoms come in different sizes, but most are visible using a simple hand lens.
Answer: Atoms combine to make all the substances on Earth.
Explanation:
Atom is a smallest entity of any matter. The atoms of different elements combine together in order to form new substances. The atoms have electrons, neutrons, as well as protons. The atoms are combined by the chemical bond. When two or more atoms combine they form a molecule. The molecules combine to form compound. Atoms cannot be broken into sub parts. The two atoms of hydrogen and one of oxygen forms water which is an essential liquid on planet earth. Other substances like carbon dioxide, coal, and sodium chloride.
What animal has a see through body?
A 1,900-m3 water tower has been cleaned with a chlorine solution. The vapors of chlorine in the tower exceed allowable concentrations for the work crew to enter and finish repairs. If the chlorine concentration is 15 mg/m3 and the allowable concentration is 0.0015 mg/L, how long must the workers vent the tank with clean air flowing at 2.35 m3/s
Answer:
t = 1862 s
Explanation:
To do this, we need first to determine the theorical detention time, which can be determined with the following expression:
t₀ = ∀/Q (1)
Where:
t₀: detention time
∀: Volume of the fluid in the reactor
Q: Flow rate in the reactor
With this time, we must use the following expression to determine the time that the workers will take to vent the tank:
C = C₀ e^(-t/t₀) (2)
From here, we must solve for time t, and the expression will be:
t = ln(C₀/C) * t₀ (3)
Now that we know the expression to use, let's solve for t. Using (1) to determine the detention time, ∀ is 1900 m³, and Q is 2.35 m³/s so:
t₀ = 1900 / 2.35 = 808.51 s
Now, let's solve for the time t. C will be 0.0015 mg/L (or 1.5 mg/m³ cause in 1 m³ we have 1000 L) and C₀ 15 mg/m³:
t = ln(15/1.5) * 808.51
t = 1861.66 s or simply 1862 sHope this helps
Definition of chemical change
Answer:
Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions.
Explanation:
Complete the following table. The first row has been completed as an example.
Symbol
Atomic number Mass number Number of protons Number of neutrons
17C1
17
37
17
20
238
U
92
92
238
146
92
325
16
32
16
16
5 Fe
54
26
I
19
1.K
41
22
Submit Answer
Try Another Version
4 item attempts remaining
Answer:
because all chemical reaction involve the rearrangement of atoms, the mass is an electron is negatively charged, it has a mass approximately 1/2000 that of a, Atoms of an element that contain the same number of protons but a different Copy and complete the following tables concerning the isotopes of silicon SI-28.
Explanation:
20 POINTS! NEED HELP
How many electrons does sulfur have to gain to achieve the Octet Rule?
1. 1 electron
2. 2 electrons
3. 3 electrons
4. 4 electrons
Answer:
Sulfur needs 2 more electrons to achieve octet in its valence shell.
Explanation:
According to the electronic configuration, 2 electrons are required to be gained by the sulfur to achieve the octet rule.
What is electronic configuration?
Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/29757010
#SPJ6
of nitrogen gas)?
How many grams of H2 are needed to produce 71.1 g of ammonia (NH3) (assuming unlimited availability
3 H2+ N2 + 2NH3
Provide the answer with 3 or more significant figures.
Answer:
[tex]m_{H_2}=12.6gH_2[/tex]
Explanation:
Hello there!
In this case, given the reaction:
[tex]3 H_2+ N_2 \rightarrow 2NH_3[/tex]
It is possible to compute the necessary grams of hydrogen which produce 71.1 g of ammonia, given the 3:2 mole ratio and their molar mass as shown below:
[tex]m_{H_2}=71.1gNH_3*\frac{1molNH_3}{17.04gNH_3}*\frac{3molH_2}{2molNH_3} *\frac{2.02gH_2}{1molH_2}\\\\m_{H_2}=12.6gH_2[/tex]
Best regards!
An adaptation is best described as occurring over which time scale? *
(10 Points)
O A. over many eras
O B. over many generations
O C. over one generation
D. over the lifetime of one individual
Answer:
over many eras
Explanation:
In an ecosystem, an adaptation is best described as occurring over many generations.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
There are various types of ecosystem present in the environment.
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ6
Question 9 a N20(9) + CO(9) - N2(9) + CO2(9) The rate of the reaction represented above increases significantly in the presence of Pd(s). Which of the following best explains this observation?
А Pd increases the activation energy of the reaction.
B Pd absorbs the heat produced in the reaction. C One of the reactants binds on the surface of Pd, which introduces an alternative reaction pathway with a lower activation energy.
D One of the products binds on the surface of Pd, which increases the reaction rate by decreasing the concentration of products in the mixture.
Answer:
Ans choise B
Explanation:
Increasing rates of reaction by catalysts always results because of decrease in activation energy occurs.
Please someone help mee
Answer:
13.9kj/mol
Explanation:
[tex]h = 891 -(393.5 +2*241.8)=1768.1=13.9kj/mol[/tex]
Which two notations represent isotopes of the same element?
1.
N and EN
2.
N and Ne
3
N and Ne
4.
N and Ne
Submit Answer
Answer:
No.2, No.3 and No.4 answers are same. Give the options properly.
Mass of hydrated copper sulfate in CuSo4.5H2O
Answer: Molar mass of [tex]CuSO_4.5H_2O[/tex] is 249.68 g/mol.
Explanation:
Molar mass is the mass of 1 mole of the molecule. It is calculated by adding masses of all the atoms in the given molecule.
[tex]CuSO_4.5H_2O[/tex] contains one atom of copper , 1 atom of sulphur, 9 atoms of oxygen and 10 atoms of hydrogen
Mass of copper = 63.5 g/mol
Mass of sulphur = 32.06 g/mol
mass of oxygen = 16.00 g/mol
Mass of hydrogen = 1.008 g/mol
Thus mass of [tex]CuSO_4.5H_2O[/tex] = 63.5(1)+32.06(1)+16.00(9)+1.008(10)=249.68 g
Molar mass of [tex]CuSO_4.5H_2O[/tex] is 249.68 g/mol.
IUPAC name for c2h2cl2?
Answer:
okay that is cool
Explanation:
Answer:
I hope it helps u! :)
Explanation:
what structure and bonds are formed in group 1 elements
What causes red blood cells to become sickle-shaped in a person with sickle
cell anemia?
A. Inheriting a specific gene
B. Eating a diet lacking a specific vitamin
C. Breathing in a specific pathogen
D. Touching a specific plant toxin
Answer:
A. Inheriting a specific gene
Explanation:
I hope this helps! ^^
☁️☁️☁️☁️☁️☁️☁️
Answer:
A. inheriting a specific gene
Explanation:
because sickle cell anemia is caused by a mutation in the gene responsible for making hemoglobin that makes blood red and enable the rbcs to carry o2 from lungs to the whole body.
but both mother and father must pass the defective gene to the child to be sick with sickle cell anemia otherwise the child will carry the gene but shows no sign of the anemia.
The bond order for a double bond is
Answer:
B.Two
Explanation:
Which statement best explains how the solution should be made?
A) Add 1.5 mL of 0.50 M H2SO4 to 10.5 mL of water to get 12 mL of 4 M H2SO4.
B) Add 1.5 mL of 4.00 M H2SO4 to 10.5 mL of water to get 12 mL of 0.50 M H2SO4.
C) Add 1.5 mL of 4.00 M H2SO4 to 12 mL of water to get 0.50 M H2SO4.
Answer:
B
Explanation:
Correct on Edge
450. grams of water are heated from 20.0 °C to 37.0 °C. How many kcal were absorbed by the water? Note that this is the amount of heat absorbed when a glass of cold water is consumed.
Answer:
Q = 32,007.6 J
Explanation:
Hello there!
In this case, since the energy involved during a heating/cooling process is:
[tex]Q=mC(T_f-T_i)[/tex]
Thus, given the mass, specific heat of water, initial temperature and final one, we plug in obtain:
[tex]Q=450g*4.184\frac{J}{g\°C} (37.0\°C-20.0\°C)\\\\Q=32,007.6J[/tex]
Best regards!
How does fertilizer benefit the daily lives of people?
Answer:
Fertilizers play an important role in providing crops with the nutrients they need to grow and be harvested for nutritious food. Fertilizers help deliver enough food to feed the world's population. ...
For example, micronutrients such as zinc are important to human nutrition, especially children.
Explanation:
Hope it is helpful.....
According to the tow of conservation of matter, we know that the total number of atoms does not change in a chemical reaction and thus mas is conserved This
is part of a chemical reaction hydrogen plus orygon yobis water Can you complete this moder? Reorganize the reactants in order to complete the productie
of the reaction
Your answer:
Answer:
no sé de eso perdón necesito los puntos
what is the molarity of ethanol c2h5oh in an aqueous solution that is 36.4% ethanol by mass
Answer:
the answer is A
Explanation:
Write the equation for the acid dissociation, write the Ka expression, solve for Ht concentration, then do an ICE chart. Put the values into the Ka expression (the one you solved for Ht and find Ht, convert to pH and input that to 2 decimal place. Or use the Henderson-Hasselbalch equation:
pH = pka, + log ( Base/Acid)
Calculate the pH of a buffer solution consisting of 0.39 M HA (Ka = 8.8 x 10^-6) and 0.2 M NaA.
Answer:
The pH of the buffer is 4.77
Explanation:
Using Henderson-Hasselbalch equation we can solve the pH of the buffer:
pH = pKa + log [A⁻] / [HA]
Where pH is the pH of the buffer
pKa is -log Ka = 5.056
[A⁻] = [NaA] = 0.2M
[HA] = 0.39M
Replacing:
pH = 5.056+ log [0.2] / [0.39]
pH = 4.77
The pH of the buffer is 4.77