Answer:
Molarity of HCl = 1.6M
Explanation:
The chemical reaction equation is;
HCl(aq) + NaOH(aq) —> NaCl(aq) + H2O(l)
Now, molarity = number of moles/volume
Thus, for NaOH, we have;
Number of moles = molarity × volume = 2M × (20/1000) L
Number of moles = 0.04 moles
Using the coefficients in the chemical equation above, we can find the corresponding number of moles for HCl.
Number of moles of HCl = 0.04 moles NaOH × (1 mole of HCl/1 mole of HCl) = 0.04 moles of HCl
Thus;
Molarity of HCl = 0.04/(25/1000)
Molarity of HCl = 1.6M
7. Which word BEST describes symbiosis?
O A. ecosystem
O B. relationship
O C. living
OD. environment
Answer:
d.
Explanation:
po ata d ako sure sorry
How many Zn atoms are there in 4.65 moles of Zn?
atoms
Submit Answer
Retry Entire Group
9 more gra
Convert 812.4 kPa into atm
Answer:
Explanation:
There are a series of unit used to measure PRESSURE. They include millimetre mercury (mmHg), atmospheric pressure (atm), kilopascal etc. These units of measurement are interconvertible i.e. can be changed from one unit to another.
Based on this question asking to convert
1 kilopascal = 0.00986923atm
If 3.0 moles of a gas are in a 60.0 liters container at 400.0 K, what is the pressure, in atm, inside
the container?
A.
0.61 atm
B.
16 atm
C.
1.6 atm
Answer:
C. 1.6 atm
Explanation:
PV = nRT
Solve for P --> P = nRT/V
n = 3.0 mol
R = 0.08206 L atm / mol K
T = 400.0 K
V = 60.0 L
P = (3.0)(0.08206)(400.0) / (60.0) = 1.6 atm
The mass of this atom is:
u. 3 mass units
b. 4 mass units
c. 6 mass units
d. 7 mass units
e. 11 mass units
Viruses are not considered organisms, because they lack many of the characteristics of living things. A virus is essentially a string of genetic material in
a protein coat. Some viruses contain DNA, while others, called retroviruses, contain RNA. One example of a retrovirus is HIV, which causes AIDS
How is RNA different from DNA? Choose the 2 statements that apply
A. DNA and RNA use different sets of nitrogen bases.
B
DNA has 1 strand of genetic material while RNA has 2 strands
C. DNA contains deoxyribose sugar and RNA contains ribose sugar,
D. DNA and RNA are proteins
Answer:
well, I think the answer is C
The difference between RNA and DNA are:
A. DNA and RNA use different sets of nitrogen bases.
C. DNA contains deoxyribose sugar and RNA contains ribose sugar.
What are RNA and DNA?DNA and RNA, both are genetic materials, but DNA is double-stranded and RNA is single-stranded.
DNA is present in all animals and plants, and RNA is present in viruses and bacteria.
Both are made up of nitrogenous bases and sugar.
Thus, the correct options are A and C.
Learn more about viruses
https://brainly.com/question/2401502
1. Which functional group is found in an ester? (1 point)
Answer:
2nd one
Explanation:
Fact!
At conditions of 785 torr of pressure and 233k a gas occupies a volume of 45.5mL what will be the temperature of the same gas at 745 torr and 634L
Answer:
785
=
233
k
=
45.5
m
L
=
745
=
634
L
=
Explanation:
El mercurio ha sido utilizado como elemento para medir la temperatura porque Es una mezcla. Al aumentar la temperatura se dilata con facilidad. Es un buen conductor del calor. Es un buen conductor de la electricidad.
Answer:
La respuesta correcta es: Al aumentar la temperatura se dilata con facilidad
Explanation:
El mercurio (Hg) es un elemento metálico que a temperatura ambiente es un líquido. Tiene la propiedad de dilatarse con facilidad al aumentar la temperatura, propiedad que ha sido utilizada en los termómetros de mercurio. En estos termómetros, el mercurio está dentro de un tubo de vidrio graduado con un bulbo para transmitir el calor. Al estar en contacto con un cuerpo más caliente (a mayor temperatura), el mercurio del interior del termómetro se dilata (expande su volumen) y asciende por el tubo indicando la temperatura correspondiente, graduada en el vidrio.
How many meters are in 65 millimeters?
Answer:
0.065 meters
Explanation:
Answer:
Start by dividing the length value by 1000, so that would be
65 / 1000 = 0.065 meters
how many moles of water is 5.02 x 10 18 molecules of water
Answer:
8.334×10^-6 moles
Explanation:
a mole is 6.023×10^23
5.02×10^18 ÷ 6.023×10^23=8.33×10^-6
so there are 8.33×10^-6 moles of water in 5.02x10^18 molecules of water
The number of moles of water in which 5.02 × 10¹⁸ molecules of water is present is 8.33 × 10⁻⁶.
What is moles?
Moles is a unit which is used to tells about the quantity of any substance, in one moles of any substance 6.023 × 10²³ number of atoms of that substances are present.
In 1 mole of water = 6.023 × 10²³ number of molecules of water is present
So, number of 5.02 × 10¹⁸ molecules of water present in how many moles will be calculated as:
Required moles = 5.02 × 10¹⁸ / 6.023 × 10²³ = 8.33 × 10⁻⁶
Hence, required moles is 8.33 × 10⁻⁶.
To know more about moles, visit the below link:
https://brainly.com/question/15356425
If you want to change the mass of your atom by 1 or more mass units, you can ether
(2 RIGHT CHOICES)
add a proton
add a neutron
add an electron
If you want to change the mass of your atom by 1 or more mass units, you can either? Add a proton and Add a neutron.
Explanation:
Option A and Option B is your answers.
To change the mass of your atom by more mass units ; you can add a proton or add a neutron ( A and B )
The nucleus of an atom is composed of a neutron and a proton while the outer shell of an atom comprises of the electrons.
The mass of an atom is dependent on the mass of the nucleus of the atom therefore to increase the mass of the atom by any number of mass units you can either add a proton or a neutron to the nucleus of the cell.
Hence we can conclude that to change the mass of your atom you can add a proton or add a neutron to the nucleus of the atom
Learn more : https://brainly.com/question/14110259
I have a Helium party balloon that can hold 3.0 liters of gas. If I blow up this balloon with 0.10 moles of oxygen gas at a pressure of 1.0 atmosphere, what is the temperature of the balloon?
Answer:
I am not yet sure on my answer
I would not want to give you wrong answers
Sorry
Sea, sand, sky, palms – made almost all of
Answer:
sup
Explanation:
An experiment was conducted to see which metal pot would be better for cooking food quickly. The table below shows how quickly small pieces of wax melted during the experiment.
Type of metal
Time for the wax to melt (seconds)
Aluminum
27
Bronze
45
Copper
15
Steel
80
The following statement was made after the data were examined: “Copper pots are the best pots for cooking food quickly.” Which term best describes this statement?
conclusion
hypothesis
procedure
result
Answer:
Conclusion.....hope this helps
Answer:
conclusion
Explanation:
A slug travels the length of a log in 2 hours. If the slug's average speed is 1.5 cm / minute how long is the log
Answer:
The length of the log is 180 cm
Explanation:
From the question given above, the following data were obtained:
Time = 2 hours
Speed = 1.5 cm/min
Distance =?
Next, we shall convert 2 hours to minutes. This can be obtained as follow:
1 h = 60 mins
Therefore,
2 h = 2 × 60
2 h = 120 mins
Finally, we shall determine the Lenght of the log. This can be obtained as follow:
Time = 120 mins
Speed = 1.5 cm/min
Distance =?
Speed = distance / time
15 = distance / 120
Cross multiply
Distance = 1.5 × 120
Distance = 180 cm
Therefore, the length of the log is 180 cm
Answer:
180
Explanation:
At equilibrium A. All reactions have ceased B. Only the forward reaction continues C. Only the reverse reaction continues D. Both the forward and reverse reactions continues
Answer:
D)both the forward and reverse reactions continue.
Explanation:
Chemical equilibrium can be regarded as state whereby rate of the forward reaction is equal to rate of backward reaction. It should be noted that At equilibrium both the forward and reverse reactions continue.
The pressure in a Red Rider BB gun cartridge is 1.5 atm. If the rifle was at 25 °C prior to firing, what is the temperature change of the cartridge after firing if the cartridge reaches standard air pressure of 1.0 atm?
Answer:
–99 °C
Explanation:
From the question given above, the following data were obtained:
Initial pressure (P₁) = 1.5 atm
Initial temperature (T₁) = 25 °C
Final pressure (P₂) = 1 atm
Change in temperature (ΔT) =?
Next, we shall determine the final temperature. This can be obtained as follow:
Initial pressure (P₁) = 1.5 atm
Initial temperature (T₁) = 25 °C + 273 = 298 K
Final pressure (P₂) = 1 atm
Final temperature (T₂) =?
P₁/T₁ = P₂/T₂
1.5 / 298 = 1 / T₂
Cross multiply
1.5 × T₂ = 298
Divide both side by 1.5
T₂ = 298 / 1.5
T₂ = 199 K
Converting 199 K to °C, we have:
T(°C) = T(K) – 273
T₂ = 199 – 173
T₂ = –74 °C
Finally, we shall determine change in temperature. This can be obtained:
Initial temperature (T₁) = 25 °C
Final temperature (T₂) = –74 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = –74 – 25
ΔT = –99 °C
Thus, the change in the temperature is –99 °C
PLEASE HELP No links or fake answers or ill report you and every question you have ever answered to getnur acc deleted. I have no idea how to shower these. Ty if you help and I will give brainliest and like and 5 stars. xx
Answer:
!dk bestie i tried to do it but i cant maybe someone else can figure it or they already did :( anyway i hope you have a amazing day luv <3
A form of energy that is related to its temperature...
nuclear energy
thermal energy
potential energy
kinetic energy
Answer:
Kinetic Energy
Explanation:
Temperature and Kinetic Energy are directly proportional.
1. Cierta muestra fue diluida así: 1 mL MP se agrega 4mL de agua, luego se extrae 0,5 mL y se lleva a 5 mL y de esta última se obtiene 0,2 y se añade 1,3 de diluyente. Calcule la dilución total.
Answer:
1/375
Explanation:
Primero se debe calcular el factor de dilución para cada dilución seriada. Para ello, se divide el volumen de muestra entre el volumen final de la solución diluida.
1) 1 mL en 1 mL + 4 mL = 5 mL
D1 = 1 mL/5 mL = 1/5
2) 0,5 mL en 5 mL
D2 = 0,5 mL/5 mL = 1/10
3) 0,2 mL en 0,2 mL + 1,3 mL = 1,5 mL
D3 = 0,2 mL/1,5 mL = 2/15
La dilución total se calcula como el producto de las diluciones seriadas realizadas:
DT = D1 x D2 x D3 = 1/5 x 1/10 x 2/15 = 1/375
Can someone help me with this
Answer:
4.
A. Alkali
B. Alkaline
C. Transition
5. True (it is extremely powerful especially when reacting with water)
Explanation:
Describe how the size of the sun compares to the sizes of the other stars.
Answer:
The sun's circumference is about 2,713,406 miles (4,366,813 km). It may be the biggest thing in this neighborhood, but the sun is just average compared to other stars. Betelgeuse, a red giant, is about 700 times bigger than the sun and about 14,000 times brighter.
Explanation:
looked it up
Explanation:
The sun's circumference is about 2,713,406 miles (4,366,813 km). It may be the biggest thing in this neighborhood, but the sun is just average compared to other stars. Betelgeuse, a red giant, is about 700 times bigger than the sun and about 14,000 times brighter
The figure shows a nutrition label. How much energy does this food contain?
Answer:
i need help with that too.
Explanation:
At a certain temperature 3.24 moles of co2 gas at 2.15atm takes up a volume of 35.28 what is the temperature in celsius
Answer:
The temperature is 12.35 C.
Explanation:
An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:
P * V = n * R * T
In this case:
P= 2.15 atmV= 35.28 Ln= 3.24 molesR= 0.082 [tex]\frac{atm*L}{mol*K}[/tex]T= ?Replacing:
2.15 atm* 35.28 L= 3.24 moles* 0.082[tex]\frac{atm*L}{mol*K}[/tex] * T
Solving:
[tex]T=\frac{2.15 atm* 35.28 L}{3.24 moles* 0.082\frac{atm*L}{mol*K}}[/tex]
T=285.5 K= 12.35 C (being 273.15 K= 0 C)
The temperature is 12.35 C.
The relation between the moles, volume, temperature, and pressure is given by the ideal gas equation. The temperature of a gas is 12.35 celsius.
What is the ideal gas law?The ideal gas law is the hypothetical gas law that depicts the relation between pressure, volume, moles of the compound, and the temperature of the gas.
The ideal gas equation is given as,
[tex]\rm PV = nRT[/tex]
Given,
Pressure (P) = 2.15 atm
Volume (V) = 35.28 L
Number of moles (n) = 3.24 mol
Gas constant (R) = 0.082
Temperature (T) = ?
Substituting values in the above equation, the temperature is calculated as:
[tex]\begin{aligned} \rm T &= \rm \dfrac{PV}{nR}\\\\&= \dfrac{2.15\times 35.28}{3.24 \times 0.082}\\\\&= 286.23 \;\rm K\end{aligned}[/tex]
Therefore, 12.35 degrees Celsius is the temperature of the gas.
Learn more about ideal gas law here:
https://brainly.com/question/4406716
Help me pretty please
Answer:
Light demonstrates wave-like and particle-like characteristics
Explanation:
Light itself is a wave but under circumstance it will present particle-like charcteristics. This is called wave-particle duality :)
convert 5.91 x 10^26 molecules h20 to moles
Answer:
0.432 mol
Explanation:
Divide the given number of molecules by Avogadro's constant. Avogradro's constant is the number of atoms/molecules in a mole of a substance.
Therefore,
2.60
⋅
10
23
molecules
6.022
⋅
10
23
molecules/mol
=
0.432175 moles
≈
0.432 moles
Explanation:
A bottle contains 2.5 moles of KOH dissolved in water, and the molarity of the solution is 0.16 M.
What volume of solution is in this bottle?
Answer:
V = 15.6 L
Explanation:
Hello there!
In this case, according to the definition of molarity in terms of the moles of solute divided by the volume of the solution, it is possible for us to write:
[tex]M=n/V[/tex]
Thus, given the moles and concentration of the solution, we can find the volume as shown below:
V=n/M
Therefore, we plug in the given data to obtain:
V = 2.5mol /(0.16mol/L)
V = 15.6 L
Best regards!
how many moles of sodium phosphate are required to make 7.5 moles of sodium nitrate in 2Na3PO4+3Be(NO3)=6NanO3+Be3(PO4)2
Answer:
2.5 moles of sodium phosphate
Explanation:
3 Pb(NO3)2 + 2 Na3PO4 → Pb3(PO4)2 + 6 NaNO3
6 (moles in the reaction)- 7.5(moles in the task)
2 (moles in the reaction)- x (moles in answer) ⇒6x = 2*7.5 ⇒ x = 15/6=2.5 (moles)
1. How many moles are in 3.50 grams of NaCl?
0.0600 mol
O 203 mol
O 78.4 mol
O 0.156 mol