[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the concept of Efficiency.
We know that, efficiency is given as,
E (eta) = Output work / Input Work
hence, here, E = 29% and Output work = 225
hence, 29% = 29/100 in real..
hence, the work done on piston is given as,
29/100 = 225/I
therefore, I = 225*100/29 ==> I = 22500/29 ==> I = 775.8 joules
hence, the work done on the pistons is 775 J
Help me on this please
1. Heat energy is also known as
energy.
?
Heat energy is also called thermal energy.
Forces at a Distance
Use Equation: e-r/T
If the distance between the two foci in an orbit is 4 AU, and the length of the major axis is 9 AU, what is the eccentricity of the orbit?
O 0.888
O 0.222
O 2.25
O 0.444
What is atomic composition
Answer:
The atom consists of a tiny nucleus surrounded by moving electrons. The nucleus contains protons, which have a positive charge equal in magnitude to the electron's negative charge. The nucleus may also contain neutrons, which have virtually the same mass but no charge.
Explanation:
So what is 27+22? Is it
A 8338
B 8282
C 8228
D 8234
Answer:
You put the add sign, so it would be 49. I don't believe that is what you meant to put though.
Explanation:
i gotchu, 27+22 so you take the 8 and multiply that by the number of times you blink every 2 minutes and then divide that by 0×1 and carry the 3 and that gives you -7
A spiral staircase winds up to the top of a tower in an old castle. To measure the height of the tower, a rope is attached to the top of the tower and hung down the center of the staircase. However, nothing is available with which to measure the length of the rope. Therefore, at the bottom of the rope a small object is attached so as to form a simple pendulum that just clears the floor. The period of the pendulum is measured to be 8.5 s. What is the height of the tower
Answer:
L = 17.94 m
Explanation:
The angular velocity of a simple pendulum is
w = [tex]\sqrt{ \frac{g}{L} }[/tex]
the angular velocity is related to the period
w = 2π / T
we substitute
[tex]\frac{4\pi ^2 }{T^2} = \frac{g}{L}[/tex]
L = [tex]\frac{g T^2}{4 \pi ^2}[/tex]
let's calculate
L = 9.8 8.5² / 4π²
L = 17.94 m
what is conservation of energy in physics?
Answer:
https://www.khanacademy.org/science/physics/work-and-energy/work-and-energy-tutorial/a/what-is-conservation-of-energy
Explanation:
Look at this website it gives you all the details! :)
Water is a great conductor of electricity. True or False
Answer:
False
Explanation:
Think about every warning on electrical products, which is 'DO NOT KEEP NEAR WATER'
Answer:
FALSE
Explanation:
Pure water is not a good conductor of electricity. ... Because electrical current is carried by ions in solution, conductivity increases as the ion concentration increases. In such a way, that the conductivity when water dissolves ionic compounds.
A meteor moving through space speeds up as it gets closer to Earth. What force causes the meteor's speed to increase the closer it gets to Earth?
PLS Help
Answer:
gravity
Explanation:
its hard to explain its one of the resons we do gravity assists for space probes and such the meteor will catch earths gravity and be pulled in by it if you look at sednas orbit as it gets closer to the sun it speeds up.
The force that causes the meteor's speed to increase as it gets closer to Earth is the gravitational force of earth.
What is meant by gravity ?Gravity is defined as the force by which a planet attracts another body towards its center.
Here,
The meteor was moving through space and the speed of the meteor started increasing as it moves closer to the earth.
This is because of the gravitational force of earth that is being exerted on the meteor. Gravitational force of earth is defined as the force of attraction that the earth exerts on another body in its gravitational field and draws them towards the center of the earth.
As the meteor moves towards the earth's , it gets accelerated by the earth's gravitational field such that the speed of the meteor increases and thus it attains more kinetic energy. As a result, the meteor moves faster when it gets closer to earth. This is because of the force of gravity of the earth.
Hence,
The force that causes the meteor's speed to increase as it gets closer to Earth is the gravitational force of earth.
To learn more about gravity, click:
https://brainly.com/question/14874038
#SPJ3
NO LINKS OR UNUSEFUL ANSWERS
What is the trade off between the input and output forces when someone uses a screw?
Sara travels east 6 miles and then goes south 3 miles and then north 8 miles. What is her displacement? Round
your answer to two significant figures.
a
Ob
6.3 miles SW
7.8 miles SW
0 miles
5.7 miles SW
7.8 miles NE
6.3 miles NE
od
Оe
Of
5.7 miles NE
Oh
9.1 miles sw
9.1 miles NE
Answer:
Explanation:
so her displacement is the distance from the start... she's now at a point (6,5) away from the start.. so what's the length of the side of the right triangle made by one side of 6 and the other of 5
Yes.. use Pythagoras theorem to solve this
C = √([tex]6^{2}[/tex]+[tex]5^{2}[/tex])
C = √(36 + 25)
C = √61
C = 7.810 miles.. north east of where she started
C = 7.8 miles NE :P
When the Asthenosphere transfers heat, what happens?
Convection Currents, Earthquakes, volcanic eruptions, or weathering?
anyone good at physics that can help me plss
Answer:
Where is the question?
-_-
-_-
-_-
-_-
-_-
Recommend An architect wants to design a conference room that
reduces noise coming from outside the room. Suggest some design
features that should be considered in this project.
Answer:
Install sound absorbers such as foam or acoustical panels
Explanation:
They could install some sound absorbers such as foam or acoustical panels in the walls, floors, and ceiling of the conference room.
Can you please answer my question correctly ASAP
Answer:
1) C, 2) C, 3) B, 4) D, 5) A/B, 6) D, 7) D, 8) A, 9) B, 10) A
Explanation:
1) Seconds, minutes and days are time units. (Correct answer: C)
2) The displacement is shortest distance between the point of origin and the point of destination. (Correct answer: C)
3) The velocity is the rate of change of position in time. (Correct answer: B)
4) Graphs are a very useful ressource to infer characteristics inherent to a studied physical variable. (Correct answer: D)
5) There are two possible answers, since both milimeters and meters are units for distance. (Correct answers: A/B)
6) The distance is the arc length of the entire path that object travelled. (Answer: D)
7) Traditionally, in a position vs. time graph we plot time in the x-axis. (Answer: D)
8) In this case, we use a distance-time graph, where travelled distance is the dependent variable and time is the independent variable. (Answer: A)
9) The point of origin is the initial position of the object. (Answer: B)
10) The point of destination is the final position of the object. (Answer: A)
What concept does the image above show?
A commercial jet liner takes off with an average acceleration of 3 g. How long does it take to reach the end of its runway which is 1524 meters away?
Answer:
The time taken for the commercial Jet liner to reach the end of its runway is 10.18 s.
Explanation:
Given;
average acceleration of the commercial Jet liner, a = 3g = 3 x 9.8 m/s² = 29.4 m/s²
distance traveled by the commercial Jet liner, s = 1542 m
The time taken for the commercial Jet liner to reach the end of its runway is calculated as follows;
s = ut + ¹/₂at²
where;
u is the initial velocity of the commercial Jet liner = 0
s = 0 + ¹/₂at²
s = ¹/₂at²
2s = at²
[tex]t = \sqrt{\frac{2s}{a} } \\\\t = \sqrt{\frac{2 \times 1524}{29.4} } \\\\t = 10.18 \ s[/tex]
Therefore, the time taken for the commercial Jet liner to reach the end of its runway is 10.18 s.
PLZZ HELP ME PLZ I NEED YALL HELP WITH THIS LAST QUESTION
Answer:
The 5 Forces
Explanation:
The five forces that influence wind speed and direction are: Pressure gradient force (flow from high to low pressure) Coriolis force (apparent deflecting force due to the rotation of the Earth) Turbulent drag (Earth's surface or objects like trees or grass resist air flow and decrease wind speed near the ground)
A girl runs 40m due south in 40 seconds an d then 20m due north in 10 secondsCalculate.
the average speed,
her average velocity .
in her change in velocity for the whole journey!
The average speed of the girl is 1.2 m/s.
Average velocity is defined as the trade in position or displacement (∆x) divided by the time durations (∆t) wherein the displacement takes place. The common velocity can be effective or negative depending upon the sign of the displacement. The SI unit of average velocity is meters per second (m/s or ms-1).
Given;
Total distance = 40 + 20 = 60 M
Displacement = 40 - 20 = 20 m south
total time = 40 + 10 = 50 seconds
Average speed = total distance / total time
= 60/50
= 1.2 m/s
average velocity = total displacement / total time
= 20 / 50
= 0.4 m/s due south.
Average velocity is calculated by means of dividing your displacement (a vector pointing out of your initial role in your final position) through the entire time; the average pace is calculated by way of dividing the overall distance you traveled by means of the total time.
Learn more about average velocity here:-brainly.com/question/1844960
#SPJ1
If it takes 35J to lift up an object to some height, then how much gravitational potential energy will that object have?
What kind of energy does an electromagnet use to pick up metallic objects?
Answer:
Magnetic energy is used by an electromagnet to pick up metallic objects
Explanation:
An electromagnet generates its own magnetic field in presence of electric current.
As an electric current is induced in an electromagnet , it magnetic dipole arrange themselves in order to behave as a magnet and hence generate magnetic field with a proper north and south. This leads to attraction of metallic object.
Hence, it can be said that Magnetic energy is used by an electromagnet to pick up metallic objects
A family is driving from Vancouver to Calgary, a distance of 907.3 km. During the first 300 km, they average 92 km/h. They stop for lunch for 38 min. They arrive in Calgary 8 h and 21 min after their lunch break.. What was their average speed (in km/h) for the entire journey, including the break?
Answer:
89 i would say
Explanation:
The carbon cycle relies on producers and consumers to survive. What is the role of each in the carbon cycle?
8. An electric force F exists between two objects, both having thecharge, q. If the charge on one object is doubled to 2q, the force
between the objects becomes
A. 1/4 F
B. 1/2 F
C. 2F
D. 4F
what is the difference between storm spotter and storm chaser?
Answer:
this is just a guess
Explanation:
a storm spotter only spots the storm and a storm chaser looks for the storm????
2. Why is alcohol thermometer not suitable to measure high temperature?
Answer:
Alcohol thermometers are used rather than mercury thermometers in very cold regions because alcohol has a lower freezing point than mercury. Pure ethanol freezes at -115 degrees C, while mercury freezes at -38 degrees C.
Explanation:
It is less durable because alcohol evaporates faster than mercury. It cannot measure high temperature because of a low boiling point. It wets the walls of the thermometer, which can adversely impact the accuracy of readings
4. Given that the specific heat of copper is 385J/kg/K and if 81.2J of heat is applied to 17.8g of copper by how much will the temperature of the copper increase?
Answer:
11.85 k
Explanation:
11.85 k
A dog sits on a flat surface. If the dog has a mass of 13 kg, what is the normal force acting on it?
85 N
13 N
127 N
41 N
Answer:
127
Explanation:
f(n)=mg
(13)*(9.81)
127.4N
will give Brianliest answer. help.
consider a collusion in one dimension that invoves two objects of masses 4.5 kg and 6.2 kg the larger mass is originally at rest, and the smaller mass has an initial velocity of 16 m/s [E]. the final velocity of the larger object is 10.0 m/s [E]. calculate the final velocity of the smaller object after the collision.
Answer:6.2
Explanation:
Which statement compares the strengths of electric forces between particles of matter?
Please don't just guess for points, if your answer is wrong i'll report it.
A. Hydrogen bonds are stronger than ionic bonds but weaker than Van der Waals forces.
B. Metallic bonds are stronger than hydrogen bonds but weaker than ionic bonds.
C. Hydrogen bonds are weaker than Van der Waals forces but stronger than metallic bonds.
D. Metallic bonds are weaker than hydrogen but are stronger than ionic bonds.
B. Metallic bonds are stronger than hydrogen bonds but weaker than ionic bonds.
The statement is discussing the relative strengths of different types of electric forces that can exist between particles of matter.
Metallic bonds are formed by the sharing of electrons between atoms in a metal, and are considered relatively strong. Hydrogen bonds are formed between molecules that contain hydrogen and are relatively weak compared to metallic bonds.
Ionic bonds are formed between positively and negatively charged ions and are generally considered to be the strongest of these three types of bonds. Thus, the statement concludes that metallic bonds are stronger than hydrogen bonds but weaker than ionic bonds in terms of their relative strengths.
For more such question on hydrogen
https://brainly.com/question/2111051
#SPJ11