Answer: Thus 81 grams of Au is 9210 ml
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
[tex]\text{moles of Au}=\frac{81g}{196.96g/mol}=0.411moles[/tex]
1 mole of Au occupies = 22.4 L
Thus 0.411 moles of Au occupy = [tex]\frac{22.4}{1}\times 0.411=9.21L=9210ml[/tex]
81 grams of Au is 9210 ml
What is the mass percent of potassium sulfate in solution if 78g of potassium sulfate is dissolved in 500 mL of water? (The density of water is 1.00 g/mL)
Answer:
13.5 %
Explanation:
First we calculate the mass of 500 mL of water, using its density:
Volume * Density = Mass500 mL * 1.00 g/mL = 500 gThen we calculate the mass percent of potassium sulfate, using the formula:
Mass of Potassium Sulfate / Total Mass * 100%
78 g / (78 + 500) g * 100 % = 13.5 %Identify the type of reaction.
Al + MgSO4 = Al2(SO4)3 + Mg
Answer: its combustion
Explanation:
pleaaaaase helppppppppppppp ASAP
Answer:
Explanation:
a) The forward reaction is exothermic, hence when temperature is increased the equilibrium shift towards the reactants side to get rid of the excess energy. This will mean that more reactants are produced decreasing yield
b) There are a fewer number of moles of gas on the right side compared to the left side (Just count the coefficients before each compound) so a higher pressure will mean that the equilibrium will shift towards the products side in order to decrease the pressure. This will mean that more products are formed increasing yield
c) When something is powdered it's surface area to volume ratio increases. A higher surface area means that the particles around it have more area to work on so the frequency of collisions will increase increasing the rate of reaction. This is why iron is powdered.
HELP FAST 100 PTS Calculate the amount of heat needed to lower the temperature of 50.0g of ice from -40 °C to -100 °C.
Answer:
[tex]\Large \boxed{\sf -6000 \ J}[/tex]
Explanation:
Use formula
[tex]\displaystyle \sf Heat \ (J)=mass \ (kg) \times specific \ heat \ capacity \ (Jkg^{-1}\°C^{-1}) \times change \ in \ temperature \ (\°C)[/tex]
Specific heat capacity of ice is 2,000 J/(kg °C)
Substitute the values in formula and evaluate
[tex]\displaystyle \sf Heat \ (J)=0.05 \ kg \times 2000 \ Jkg^{-1}\°C^{-1} \times (-100\°C-(-40 \°C))[/tex]
[tex]Q=0.05 \times 2000 \times (-100-(-40)) =-6000[/tex]
Estimate the crystal field stabilization energy for the octahedral ion hexacyanomanganate(III) , if the wavelength of maximum absorption for the ion is 600 nm. [Note: This is a high-field (low-spin) complex.]
Answer:
The crystal field stabilization energy for the octahedral ion hexacyanomanganate(III) , if the wavelength of maximum absorption for the ion is 600 nm is - 1987.59kJ/mole
Explanation:
Lets calculate -:
Crystal field stabilization energy -
[tex]E=\frac{hc}{\pi }[/tex]
where h = planks constant = [tex]6.626\times10^-^3^4 Js[/tex]
c= velocity of light = [tex]3\times10^8m/second[/tex]
[tex]\pi =wavelength=600nm=600\times10^-^9m[/tex]
[tex]E=\frac{6.626\times10^-^3^4\times3\times10^8}{600\times10^-^9}[/tex]
=[tex]0.033\times10^-^1^6 J/ion[/tex]
= [tex]0.033\times10^-^1^6\times6.023\times10^2^3[/tex]
= [tex]0.198759\times10^7 J/mole[/tex] = [tex]1987.59\times10^3J/mole[/tex]
= [tex]1987.59kJ/mole[/tex]
Thus , the crystal field stabilization energy for the octahedral ion hexacyanomanganate(III) is 1987.59kJ/mole
How can you determine if elements have the same properties?
Answer:
You will know if elements have the same properties if they are in the same column (up and down) on the periodic table.
Explanation:
Ex: Lithium and a hydrogren has the same properites bcause they are both on the same line/column. Columns are up and down the table and rows are left and right. Hope this helps
Which of the different components of smog depicted in the graph are most likely released from automobile exhaust?
A
A and B
B
B and C
с
A, B, and C
D
B, C, and D
Answer:
B, B and C
Explanation:
The two components (AA, hydrocarbons and BB, nitrogen oxide) are most likely released from automobile exhaust.
What is Smog?This is referred to a type of air pollution which could be from carbon emission etc and reduces the visibility.
(AA, hydrocarbons and BB, nitrogen oxide peaked midmorning when traffic is highest which means they were most likely released from automobile exhaust?.
Read more about Smog here https://brainly.com/question/14029972
5. What types of surfaces would result in greater friction?
Answer:
Rough and irregular surface
these surfaces tends a lot of friction
but on smooth surface there is least friction
hope it helps
calculate the ph of one solution containing 0.1 M formic acid and 0.1 M sodium formate before and after the addition of 1mL of 5 M Naoh. how much could the Ph change if the NaOh were added to 1 L of pure water
Answer:
Pka of formic acid (HCOOH)= 3.75
pH= PKa +log [ Sodium formate/ formic acid] = 3.75
NaOH reacts with HCOOH as HCOOH (aq) + NaOH(aq) --> NaCHO2 (aq) and H2O (l)
Moles of HCOOH= 0.1*1= 0.1 moles
Moles of NaOH= 5*1/1000= 0.005 moles
HCOOH is in excess and the excess is = 0.1 - 0.005 = 0.095
Moles of sodium formate = 0.005 + 0.1 = 0.105 moles of HCOOH= 0.095
volume after mixing = 1 + 5 /1 000=1.005
Concentrations : HCOOH= 0.095/1.005 sodium formate= 0.105/1.005
pH= 3.75+log (0.105/0.095)=3.85
When NaOH is added, molarity is , 1*5= 1000*M
M= 5/1000=0.005
The pH remains the same. Only the molarity of NaOH changes.
3.0L of a gas is at a temperature of 78c. Find the volume of the gas at standard temperature
Answer:
V=2.33361811192L or 2.3x10
Explanation:
Using Charles law V1/T1=V2/T2 Remember to convert celcius to kelvin by using the standard temperature 273.15K
3L/(78C+273.15)=V/273.15
According to the text, fission occurs when the nucleus
two lighter nuclei.
Answer:
Splits into
Explanation:
Because fission reaction is divided into two or more pieces.
In this field of sunflowers variation exists some flowers are tall others short
Answer:
Some flowers are tall, others short, and finally some plants are an intermediate height. The tallest plants shade the shorter; the taller plants are
Explanation:
is oxygen a beginning substance or ending substance?
Solution remained colorless.
During the experimentation, the test tube was gently heated in a Bunsen burner flame for 60 seconds. What was the reason for this specific
procedure?
A)
Heating was done to initiate the combustion of the metal in water.
B)
Heating was done to confirm that no chemical reaction would take
place in acid
0
Heating was done to precipitate the chemical change in each test
tube containing water
D)
Heating helped released the hydrogen contained in water
molecules so students would have a positive H+ test.
write the value of atmosphere pressure at sea level .
Answer:
standard sea- level pressure,by definition,equals 760 mm of Mercury,14.70 pounds per square inch, 1,013.25x10³ dynes per square centimetre, 1,013.25 millibars,one standard atmosphere,or 101.325 kilopascale
Here's your answerl hope it's helpful for u....
Uranium, an important component of both nuclear weapons and nuclearreactors, has two major isotopes, U-238, which has a half-life of approximately billion years, and U-235, which has a half-life of approximately million years. Both were present in equal amounts at the time of thecreation of the Earth, billion years ago. How many years after the creationof the Earth had the amount of radiation from uranium decayed to half theamount present at the time of the creation of the Earth
Answer:
Hello your question is poorly written below is the well written question
Uranium, an important component of both nuclear weapons and nuclear reactors, has two major isotopes, U-238, which has a half-life of approximately 4.5 billion years, and U-235, which has a half-life of approximately 700 million years. Both were present in equal amounts at the time of the creation of the Earth, 4.5 billion years ago. How many years after the creation of the Earth had the amount of radiation from uranium decayed to half the amount present at the time of the creation of the Earth
Answer : 140 billion years
Explanation:
Given that :
U-238 h1/2 = 4.5 billion years
U-235 h1/2 = 700 million years
At the beginning both Isotopes where present in equal amount
Determine the T years before the amount of Uranium decays to Half
T = ? N'2 = N1 / 2
we know that N = No ( 1/2 )^h where h = time / half-life time
attached below is the detailed solution of the given problem
What is the pressure exerted by 2.5 mol of gas with a temperature of 25 Celsius and a volume of 12.2 L
Answer:
5.01 atm
Explanation:
To answer this question, we're going to use the PV=nRT equation, where in this case:
P = ?V = 12.2 Ln = 2.5 molR = 0.082 atm·L·mol⁻¹·K⁻¹T = 25 °C ⇒ 25 + 273.16 = 298.16 KWe input the data:
P * 12.2 L = 2.5 mol * 0.082 atm·L·mol⁻¹·K⁻¹ * 298.16 KAnd finally solve for P:
P = 5.01 atmThis equation shows the combustion of methanol.
2CH2OH(1) +302(g) → 2C02(g) + 4H2O(g)
How many liters of carbon dioxide gas at STP are produced by the combustion of 64.0 g of methanol
(CH3OH)
A. 44.8L
B. 89.6 L
C. 11.2L. D. 22.4L
Answer: 44.8 L
Explination:
44.8 liters of carbon dioxide gas at STP are produced by the combustion of 64.0 g of methanol. Therefore, option A is correct.
What is combustion ?Combustion is a chemical reaction between two or more substances, usually involving oxygen, that produces heat and light in the form of a flame.
Combustion is a high-temperature exothermic redox chemical reaction that occurs between a fuel and an oxidant, frequently atmospheric oxygen, to produce oxidized, often gaseous products in a mixture known as smoke.
The flash point of methanol is extremely low. This means that even trace amounts of ignition material can start a fire. 44.8 liters of carbon dioxide gas at STP are produced by the combustion of 64.0 g of methanol.
Thus, option A is correct.
To learn more about the combustion, follow the link;
https://brainly.com/question/15117038
#SPJ6
The molecular weight for the compound from the previous question is
64.07 g/mol. What is its molecular formula?
Solubility is the mass in a given volume of a substance.
True
False
Answer: True
Explanation:
If anyone could help I’d appreciate it
Answer: 2.00 mol
Explanation:
The balanced chemical equation is:
[tex]2H_2(g)+O_2(g)\rightarrow 2H_2O(g)[/tex]
According to stoichiometry :
2.00 moles of [tex]H_2[/tex] require = 1.00 moles of [tex]O_2[/tex]
Thus 2.00 moles of [tex]H_2[/tex] will require=[tex]\frac{1}{2}\times 2.00=1.00moles[/tex] of [tex]O_2[/tex]
Thus both will act as limiting reagents and will be fully consumed.
2.00 moles of [tex]H_2[/tex] will form = 2 moles of [tex]H_2O[/tex]
Thus 2.00 moles of [tex]H_2[/tex] will form = [tex]\frac{2}{2}\times 2.00=2.00moles[/tex] of [tex]H_2O[/tex]
Thus 2.00 moles of [tex]H_2O[/tex] will be produced from the given masses of both reactants.
Express these temperatures in degrees Fahrenheit and in kelvins. A.-252.97 C B. -40 C C. 1,064 C
Answer:
A. -423.346 °F, 20.18 K
B. -40°F, 233.15K
C. 1947.2 °F, 1337.15 K
Explanation:
A.
(-252.97 °C × 9/5) + 32 = -423.346 °F
-252.97 °C + 273.15 = 20.18 K
B.
(-40 °C × 9/5) +32 = -40 °F
-40 °C + 273.15 = 233.15 K
C.
(1064 °C ×9/5) + 32 = 1947.2 °F
1064 °C + 273.15 = 1337.15 K
What is the concentration of a solution with a
volume of 2.5 liters containing 660 grams of
calcium phosphate Ca3(PO4)2 ?
Answer:
660gx Imol = 2.1278 mol 310.189 2.5L 1.85 m).
Explanation:
The number of moles of 660 grams of calcium phosphate is 2.127. Then the molarity of the solution of 2.5 liter volume is 0.85 M.
What is molarity ?Molarity is a common term used to express the concentration of a solution. It is the ratio of number of moles of solute particles to the volume of solution in liters. Hence, its unit is mol/L or molar.
The molarity of a solution is a colligative quantity as well as temperature dependent.
Given,
molar mass calcium phosphate, Ca₃(PO₄)₂ =310.18 g/mol
Then,
no.of moles of calcium sulphate in 660 g = 660 g/310.18 g/mol = 2.127 moles
volume of solution = 2.5 L
Molarity = no.of moles of solute/ volume of solution in L
M = 2.127 moles/ 2.5 L
= 0.85 M.
Therefore, the molarity of the given solution is 0.85 molar.
Find more on molarity:
brainly.com/question/8732513
#SPJ6
1/5 divided by 3/4 fraction
Answer:
4/15
Explanation:
we can write out an equation by doing (1/5 ÷ 3/4) and then switch the sign to multiplication and we can keep the first fraction the same (in this case 1/5) and then we flip the second fraction BUT when we flip the second fraction upside-down we have to change the symbol to multiplication (1/5x4/3)
then after that all we do is multiply the denominators and numerators :)
1 x 4 = 4
_______
5 x 3 = 15
answer would be 4/15
what makes up the cell menbrane
With few exceptions, cellular membranes — including plasma membranes and internal membranes — are made of glycerophospholipids, molecules composed of glycerol, a phosphate group, and two fatty acid chains. Glycerol is a three-carbon molecule that functions as the backbone of these membrane lipids.
Explanation:
the principal components of plasma membrane are lipids phospholipid and cholesterol proteins and carbohydrates
Which if the following numbers in your personal life are exact numbers?
A. Your cell phone number
B. Your weight
C. Your IQ
D. Your driver's license number
E. The distance you walked yesterday
Answer:
I think D
Explanation:
Your cell phone number and your driver's license number are the numbers of your personal life that are exact.
In this context, an exact number refers to a number that if it undergoes any modification will not refer to the same thing that it referred to before that modification.
For example, my phone number is 12345. This number is exact because it cannot be changed because or else it would cease to be my phone number, that is, if someone wants to call me and writes the number 12346 it is no longer my number.
Addicionally, if my driver's license number is 112233 it is an exact number because if it is modified it would be the number of another driver.
According to the above, options B, C, and E are incorrect because they are inaccurate numbers because if they are modified they all refer to me and they would not change their meaning.
Learn more in: https://brainly.com/question/17093923
7x[(7+7)divide7]
PLEASE HELP
Answer:
ik this isnt the answer but mathwa will solve all yours problems
Explanation:
What is the molality of a solution containing 18.2 g HCl and 250. g of water?
Answer:
m=2.0mol/kg
Explanation:
Hello there!
In this case, according to the formula to compute molality, which requires moles of solute (HCl) and kilograms of solvent (water), we first compute the moles of the former with its molar mass as shown below:
[tex]n=\frac{18.2g}{36.46g/mol}= 0.50mol[/tex]
And then the kilograms of water:
[tex]\frac{250.g}{1000g/kg} =0.250kg[/tex]
Finally, the molality turns out to be:
[tex]m=\frac{0.50mol}{0.250kg}\\\\m=2.0mol/kg[/tex]
Best regards!
Fission and fusion are alike in many ways. However, one difference is
A)
Fusion forms dangerous nuclear waste that is difficult to dispose whereas
fission does not.
Eliminate
B)
Fission is a controllable chain reaction and fusion is not.
Fusion results in a greater product mass whereas fission does not.
D)
Raw materials for fission are cheaper and easy to get.
Explanation:
Fusion vs Fission
In fission, energy is gained by splitting apart heavy atoms, for example uranium, into smaller atoms such as iodine, caesium, strontium, xenon and barium, to name just a few. However, fusion is combining light atoms, for example two hydrogen isotopes, deuterium and tritium, to form the heavier helium. Both reactions release energy which, in a power plant, would be used to boil water to drive a steam generator, thus producing electricity.
Answer:
B
Explanation:
i did this
i
CH3-CH2-CO-CH2-CH2-CH3 + H2
Pd
Answer:
i don't know but I just want to have coins