You're driving your pickup truck around a curve with a radius of 22 m. A box in the back of the truck is pressed up against the wall of the truck. How fast must you drive so that the force of the wall on the box equals the weight of the box?

Answers

Answer 1

Answer:

Explanation:

Centrifugal force Fc = m x v2 / r

Weight  = mg

As required by the question

Fc = W

v2 /r = g

given radius r = 22 m

v2 /22 = 9.8

Solve for v

required speed v = √(22 * 9.8)

= 14.35 m/s

v=15 m/s

this may help you

Answer 2

The force of the wall on the box equals the weight of the box when you drive with a speed of 14.68 m/s.

What is centrifugal force?

The centrifugal force can be described as an inertial force that appears to act on all objects in a rotating frame of reference. This force is directed away from an axis that is parallel to the axis of rotation and passes through the coordinate system's origin.

The magnitude of centrifugal force of mass m at the distance r from the origin rotating with angular velocity ω is:

[tex]{\displaystyle F=m\omega ^{2}r}[/tex]

Given, the radius of the curve, r = 22m

The acceleration, a = v²/r

The weight of the box, W = mg

We know that, F = ma

mg = m(v²/r)

v = √gr

[tex]\displaystyle v =\sqrt{9.8 \times 22}[/tex]

v = 14.68 m/s

Therefore, you should drive at a speed of 14.68 m/s

Learn more about centrifugal force, here:

https://brainly.com/question/17167298

#SPJ2


Related Questions

An experiment is conducted such that an applied force is exerted on a 5kg object as it travels across a horizontal surface in which frictional forces are NOT considered to be negligible. A graph of the net force exerted on the object as a function of the object’s distance traveled is shown. How could a student use the graph to determine the net work done on the object?

Answers

If an experiment is conducted such that an applied force is exerted on an object, a student could use the graph to determine the net work done on the object.

The  graph of the net force exerted on the object as a function of the object’s distance traveled is attached below.

A student could use the graph to determine the net work done on the object by Calculating the area bound by the line of best fit and the horizontal axis from 0m to 5m

For more information on work done, visit

https://brainly.com/subject/physics

Answer:

D. There is not enough information that is known or can be obtained from the graph to determine the net work done on the object.

Explanation:

it’s the answer For Ap classroom

1. Sandra buys a $4 000 television and pays $2 000 deposit. The rest is payable in 8 equal monthly payments. If the flat rate of interest charged is 7% p.a. what is the total amount paid for the item?

Answers

Answer:

$2140

Explanation:$2000 missing plus 7 percent of 2000 is 140 so 2000+140=2140. Each month she would pay $268 approx.

The rays travelled from AIR to an unknown substance. Calculate the n value and
determine the unknown by following these steps: {6 marks}
Medium
n
air
water
ethanol
quartz glass
crown glass
flint glass
ruby
zircon
diamond
1
1.33
1.37
1.47
1.52
1.58
1.54
1.92
2.42
a. On your PAPER calculate n for the unknown value using Ray #1. Type in your
final answer to the electronic box. On paper, ensure #6 is written beside the
calculations.
b. Using the table provided, determine what material was used in the dish to
ar bu
ano below

Answers

Answer:

So what you do is you add all of them then you put an n with the answer.

Explanation:

find u + (3v - w)
u =-4i-8j
v= -11i -3j
w=5i+7j

Answers

Answer:

gunrun

Explanation:

10 time 20 minus 5 and yeah that’s all i need

Answers

Answer:

[tex]10 \times 20 - 5 \\ \\ = 200 - 5 \\ = 195[/tex]

can you fit all the planets between earth and moon

Answers

Answer: No, planets of our solar system, with or without Pluto, cannot fit within the mean lunar distance. An additional 3,500 km is needed to squeeze in Neptune

All satellite eventually lose their orbital energy and plummet to earth because of______.

Answers

Answer:

gravity

Explanation:

Even when satellites are thousands of miles away, Earth's gravity still tugs on them. Gravity—combined with the satellite's momentum from its launch into space—cause the satellite to go into orbit above Earth, instead of falling back down to the ground.

The gravitational potential energy of the ball changes as it bounces. Where is the ball located when its gravitational potential energy is greatest? Where is the ball when its gravitational potential energy has the least value?

Answers

When the planet is closest to the Sun, speed v and kinetic energy are the highest, and gravitational potential energy is the lowest. When the planet moves farther away, the speed and kinetic energy decrease, and the gravitational potential energy increases.

how is the physical property of density calculated?

Answers

Answer:

The formula for density is d=M/V

Explanation:

where d is density, M id mass, V is volume.

? Any idea on this I’m getting some mixed up

Answers

Answer:

1. electrochemical reaction

2. combustion

3. photosynthesis

4. respiration

Explanation:

Student 1 lifts a box with a force of 500 N and sets it on a tabletop 1. 2 m high. Student 2 pushes an identical box up a 5 m ramp from the floor to the top of the same table. Which student did the MOST work?.

Answers

The student 2 did the MOST work because he pushed the box to a greater height.

The given parameters:

Force applied by Student 1 = 500 NHeight of table for student 1 = 1.2 mHeight of ramp for student 2 = 5 m

The work done by student 1 is calculated as follows;

Work = P.E = mgh

P.E = 1.2mg

The work done by the student 2 is calculated as;

P.E = 5mg

where;

m is the mass of the box

Thus, we can conclude that the student 2 did the MOST work.

Learn more about work done here: https://brainly.com/question/8119756

do forces that act a distance come in pairs?

Answers

Answer:

Forces come in pairs.

Explanation:

Distances are between two points. The distance from A to B is equal but opposite the distance from B to A.

“Applications of thermal expansion in solids, liquids and gases.”
(Two for each states of matter)​

Answers

Thermal expansion is the tendency of matter to change its shape dimensions, density in response to a change in temperature.

The following are applications of thermal expansion in various matter.SolidsThe principle of thermal expansion is used in thermostat to regulate the temperature of heating device e.g Electric pressing Iron.Rivets are used to hold steel plates together very tightly.

 

  2. Gases

Hot-air balloons are an application of thermal expansionGases turbine

    3. Liquids

Engine CoolantsVolume of thermometer

Learn more about Expansion of matter here:

https://brainly.com/question/518065

A race car makes one lap around a track of radius 180 m in 90.0 s. What is the centripetal acceleration in m/s2?
a
0.5
12.6
Ob
OC
Od
.87
2.
2

Answers

Answer:

0.9m/s^2 (yours is 0.87, so choose that)

Explanation:

formula for centripetal acceleration:

v^2/r

to find v, we know that f=1/90s, and r=180m.

v=(2pir)/T

v=(2pi(180))/90

v=12.6m/s

now plug into a=v^2/r

a=(12.6)^2/180

a=0.9m/s^2

if a tent is touched with a finger on inner surface , when it is raining , it allows the rain water to leak through. give a reason for this observation

Answers

Explanation:

When water vapor in the air comes into contact with something cool, like the ceiling of a tent, its molecules slow down and get closer together. When that happens, the gaseous water vapor turns back into liquid water droplets. That's condensation!

Which statement most completely describes a Lewis electron dot diagram? A.
a representation of the electrons that form bonds in a molecule
B.
a representation of the total number of electrons in an element, compound, or ion
C.
a representation of the total number and arrangement of electrons in an element, compound, or ion
D.
a representation of the arrangement of valence electrons in an element, compound, or ion

Answers

Answer:

D.

Explanation:

it is indeed a representation of how the valence electrons in an element,coumpound, or ion are arranged.

to ensure you i was just quized on this and D is the correct anwser

A representation of the arrangement of valence electrons in an element, compound, or ion -  statement most completely describes a Lewis electron dot diagram. Hence, option (D) is correct.

What is Lewis electron dot diagram?

If the compound's molecular formula is known, electron dot structures or Lewis dot formulas can be drawn.

It describes the type of bond and the placement of the atoms within the molecule that are joined together. In honor of American chemist Gilbert Newton Lewis, molecules are depicted as having a Lewis electron dot structure or simply a Lewis structure.

Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Common names for Lewis dot structures include electron dot structures and Lewis structures. Lewis described an acid as an electron pair acceptor, while a base is an electron pair giver.

Learn more about  Lewis electron dot diagram here:

https://brainly.com/question/19093827

#SPJ2

"PLS HELP ME WITH THIS QUESTION!" Two factors that affect climate patterns on Earth are the tilt of Earth on its axis and the topography of Earth. Describe how these two factors affect the climate patterns of Earth.

Answers

Answer:

The tilt of the Earth causes some places to be hit more by the sun's rays, while the topography affects wind travel.

Explanation:

Because of the way the Earth is tilted on its axis, some parts receive more heat due to being hit more directly by the sun's rays. This is the reason why the North pole is very cold since it doesn't get directly hit by the sun's rays. As for the topography, the way the wind travels is affected by mountains, and the temperature of winds are affected by the places the wind originated from. Also, high altitude places such as mountain summits are colder, while low altitude places are warmer. So, when an area is under direct sunlight, it causes warm climate, and when an area receives warm air because of its topography, it causes further heat.

45. What is the wovelength of a 30. Hertz periodic
wave moving ol 60. meters per second?

a. 0.50m
c. m
b 20m
d 1800 m

Answers

The wavelength is 2m.

Hence, Option c) 2m is the correct answer

Given that;

Frequency; [tex]f = 30Hz[/tex]

Speed; [tex]v = 60m/s[/tex]

Wavelength; [tex]\lambda =\ ?[/tex]

using the expression for the relations between wavelength, frequency and speed of wave:

[tex]\lambda = \frac{v}{f}[/tex]

Where [tex]\lambda[/tex] is wavelength, f is frequency and v is speed.

We substitute our given values into the equation

[tex]\lambda = \frac{60m/s}{30Hz}\\\\\lambda = \frac{60m/s}{30s^{-1}}\\\\\lambda = 2m[/tex]

The wavelength is 2m.

Hence, Option c) 2m is the correct answer.

To learn more about wavelength, click here: https://brainly.com/question/1347107

The frequency of the moving wave is 30 Hz and if it is moving at the speed of 60 m/s then the wavelength will be equal to 2 m.

What is Wavelength?

The distance between two identical locations (adjacent crests) in successive cycles is known as the wavelength, and it is used to describe waveform signals that are transmitted over wires or into space. Typically, in wireless systems, this length is specified in meters (m), centimeters (cm), or millimeters (mm).

The wavelength is more frequently described in nanometers (nm), which are units of 10⁻⁹ m, or angstroms, which are units of 10⁻¹⁰ m, for infrared (IR), visible light (UV), and gamma radiation.

As per the provided given data in the question,

Frequency, f = 30 Hz

Speed, v = 60 m/s

Then, the wavelength of the moving wave will be,

λ = v/f

= 60/30

λ = 2 meters.

Therefore, the wavelength will be 2 meters.

To know more about Wavelength:

https://brainly.com/question/13533093

#SPJ2

please help me !! i’ll mark brainliest if you’re right!

Answers

Option 2nd is the answer

The ratio between the force of friction and the normal force is called:

A.the drag
B.rolling friction
C.the coefficient of friction
D.the starting friction

Answers

Answer:

C.the coefficient of friction

Explanation:

Hope this helps. can i have brainliest thanks!

Please help me answer this! ANSWER IN SCENTENCE FORMAT!!! :
Two factors that affect climate patterns on Earth are the tilt of Earth on its axis and the topography of Earth. Describe how these two factors affect the climate patterns of Earth.

Answers

The answer is
You need to look at the top of the axis
You need to look

Answer:

If you are saying How much does the tilt of the Earth affect the climate

This varies between a tilt of 22.1 and 24.5 degrees over a period of about 41,000 years. This trend not only affects the average temperature of the earth, but also how prominent the seasons are. Procession is a wobble in the earth's axis.

which constellation is in contrast with ursa major

Answers

Answer: Ursa Major (/ˈɜːrsə ˈmeɪdʒər/; also known as the Great Bear) is a constellation in the northern sky, whose associated mythology likely dates back into prehistory. Its Latin name means "greater (or larger) she-bear," referring to and contrasting it with nearby Ursa Minor, the lesser bear.

Bordering constellations: Draco; Cameloparda...

Brightest star: ε UMa (Alioth) (1.76m)

Meteor showers: Alpha Ursa Majorids; Leonid...

Symbolism: the Great Bear

which statement is not correct about force.

A, force causes deformation
B, force xauses accleration
C, if there is no force, there is no motion
D, force emerges due to interaction.​

Answers

Answer:

c

Explanation:

without force motion won't take place

The gravitational potential energy of a cucumber-harth system changes when which factor changes?

A) the cucumber's speed
B) the cucumber's mass
c) the cucumber's temperature
D) the length

Answers

The cucumbers mass.

If it’s heavier, the gravitational pull will bring it down faster.

2. What do aerospace engineers do? (1 point)
O design dams
O design machines
O design planes
O design cars

Answers

aerospace engineers design planes
They Design planes yeah

A geothermal plant has been built in a location. Which of these is the most likely benefit of the geothermal plant in this location?

A. Decrease in geothermal fuels consumption
B. Improvement to hot springs and geysers
C. Long-term cost savings for energy users
D. Increase in emission of greenhouse gases

Answers

Answer:

C

Explanation:

A and B are not true and D is a disadvantage

Answer:

C.  Long-term cost savings for energy users.

Explanation:

C is correct because the first option is a drawback that is unlikely.  B is a good answer but not the best.  It's a likely benefit, but C is a more likely benefit.  D is a drawback.  C is correct.  I also got this right on my quiz.

Hope this helps!

Which does not apply to unbalanced forces?


Net force = 0


Have direction


Net force does not = 0


Changes an object's motion

Answers

Answer:

Net force = 0

Explanation:

Whenever there is an unbalanced force, it shows that the net force doesn’t = 0 because if net force = 0, then everything force is balanced by another force. If there is an unbalanced force, acceleration will occur in the direction the net force is towards.

advantages of writing very large and very small numbers in the terms of power of ten​

Answers

Answer:

Large numbers might create fuse, be confusing and if you miss even one of the zeros it is a very big deal in a situation when you are making a spaceship. Hope this answers your questions :) Merry Christmas. Have fun.

Explanation:

2

Explanation:

for saving space in large numbers

and small numbers for multiplying easily

What does the risk of biological harm from radiation depend on?

Answers

Answer:

The effects of radiation depend on the type, energy, and location of the radiation source, and the length of exposure.

Read the excerpt from The Building of Manhattan.

A temporary, small narrow-gauge track system was installed on each floor as it was needed. This enabled the material to be moved from the truck at ground level onto dump carts, raised by elevator to the designated floor, wheeled onto the track, and moved quickly to the exact spot needed. Turntables built into the track allowed the carts to be shifted about in any direction.

Which question can be answered only if an illustration accompanies the text?

What did turntables built into the track allow?
How were dump carts raised to designated floors?
When was a track system installed on a floor?
What does a turntable built into a track loo

Answers

Answer: this would be D.) What does a turntable built into a track look like

Explanation:

Other Questions
At a theater, adult tickets for a play cost $15 each and child tickets cost $10 each. If 300 tickets were sold and the sale of the tickets generated between $3575 and $3500, inclusive, what is a possible number of child tickets that were sold?please help Joy needs 8 feet of fabric for a project she is working on, but the store only sells the fabric in meters. One meter of fabric costs $1. 15. How much will the fabric cost? [1 ft = 0. 305m] $9. 20 $2. 12 $2. 81 $30. 16. special right triangles, solve for x, y and z Find the simple interest paid on a $200 investment at 4.4% annual interest for 60 days. In how many ways can you arrange six trophies on a shelf? add the expression(3x+2)+(2x+5) PLease help and I will mark brainliest The Dutch settlement of New Netherland was claimed for the English by Charles IHenry VIII James Duke of York William Penn c) What are the causes of Green House Effect? How has treatment of Latinos and Native Americans changed over time? What does it look like now? Dothey have more freedoms and rights? PLEASE ASP HELP THIS WILL GIVE 50 POINT AND BRAINLIEST!In introductory physics, a typical cavendish balance for measuring the gravitational constant G use metal masses 2.39kg and 16g whose center are separated by 6.81cm calculate the gravitation force between these forces, treating each as a point mass located at the center of the sphere.gravitational constant =6.67259 10Nm/kg Need help again first answer gets brainliest PLEASE HELP ASAP! harold makes a plan to save $500 per month for the next 5 years. He is depositing it in an interest bearing account at 2% APR (compounded monthly). What will be Harolds balance at the end of 5 years? He found a crops in the well. ( into ' who ' question ) convent into target question would you rather have no homework with a super difficult final or homework everyday but the can' t have any mistakes. Explain why! :) Please write 3 sentences or more. Ron wants to make money painting portraits of people at the local mall. The mallcharges Ron $22.00 a day for Ron to set up his materials to sell his portraits. Hecharges $15.50 a portrait, but it costs him $3.25 in materials to make that portrait.How much profit will Ron make from each portrait he paints (not including the dailyfee that the mall charges him)?$12.00$12.25$12.50$13.00 What was the Economic Cooperation Act known as?The Better Economy ActThe Japan-Europe Recovery PlanThe Japan Recovery ActThe Marshall Plan The force as a function of displacement of a moving object is presented by the graph. How much work is done when the object moves from 5 m to 8 m? * Most factory workers in the early 1900'swere which of the following?A. ImmigrantsB. Very skilledC. FarmersD. Former railroad workers The motor in a hairdryer is attached to a 3V battery. A current of 0.8A flows through the motor for 3 minutes. Calculate the total charge in this time.