Answer:
c
Explanation:
You can differentiate between calcite and halite without using any measuring equipment based on: C. Hardness.
What is a mineral?A mineral can be defined as a form of naturally occurring, inorganic solid substance that is typically characterized by a crystal structure.
The properties of a mineral.In Science, the properties that can be used to identify and differentiate two or more minerals include the following:
LusterStreakHardnessIn conclusion, hardness is a mineral property that can be used to differentiate between calcite and halite without using any measuring equipment.
Read more on hardness here: https://brainly.com/question/24333064
Match the special cases of each gas law with its description. A law may be used more than once. In the equations, K is a constant.
A. Boyle's law
B. Charles's law
C. Avogadro's law
D. Dalton's law
____ P1 V1 = P2 V2
____ V/T = k
____ V1 / T1 = V2 / T2
____ V = kn
____ PV = k
____ Ptotal = P1 + P2 + P3 + .
The special cases of gas laws and its description includes:
A. Boyle's law: P1 V1 = P2 V2
B. Charles's law: V/T = k or V1 / T1 = V2 / T2
C. Avogadro's law: V = kn
D. Dalton's law: Ptotal = P1 + P2 + P3 + .
What is gas law?Gas laws are laws that relate a gas's pressure, volume, and temperature. Boyle's law, named after Robert Boyle, states that the pressure P of a gas varies inversely with its volume V at constant temperature, or PV = k, where k is a constant. Charles' law is named after J. -A. -C.
They also include; Gay-Lussac's Law, Avogadro's Law and Dalton's law of partial pressures.
Learn more on gas laws here: https://brainly.com/question/25290815
#SPJ1
how many miles will a person run an 800 km race?
Answer:
uhh its 497 miles
Explanation:
How many elements are in (NH4)3PO4
Answer:
4
Explanation:
There are 4 different elements in the compound (N, H, P, O) but if you want to count the number of each element then the answer is different.
In NH4, theres 1 N and 4 H, but since there are 3 NH4s then u have 3 N and 12 H. There's 1 P and 4 Os as well.
Added together u have 3 + 12 + 1 + 4 = 20 elements in total.
hope this helps!
In the tropical rainforests, birds have evolved to eat the brightly-colored fruits. The fruits have evolved their attractive color so the birds will eat them and spread their seed. What theory is this an example of? A artificial selection b coevolution c mutation d natural selection
Answer:
coevolution
Explanation:
Coevolution plays a key role in shaping the biodiversity on Earth. Coevolution is commonly defined as reciprocal evolutionary changes brought about by interactions between species, implying that interacting species impose selection on each other(Science direct).
We can see that the change that occurred in the plants of the tropical rainforests is closely related to their link to birds. The fruits evolved an attractive color so that birds, having evolved to eat the brightly-colored fruits, may eat them.
If I combine atoms then I must be performing which process?
A) Radiation Reaction
B) Strong Force
C) fission
D)Fusion
Answer:
D: fussion
Explanation:
The process called nuclear fussion.
for example, four hydrogen atoms combine in a nuclear fussion reaction to form one helium atom.
What is the molecular mass for a non-electrolyte if 35.0 g of it is dissolved in 45.0 grams of water and the solutions boiling point is 101.25oC? (The KB for H2O is .51°C/m)
The boiling point of water increases as the amount of impurities dissolved in it increases. For our purposes, we will consider the non-electrolyte to be the dissolved impurity. The change in the boiling point can be calculated using the equation:
[tex]\Delta T_b = i \times K_b \times m[/tex]
where [tex]\Delta T_b[/tex] is the change in boiling point, [tex]i[/tex] is the van ‘t Hoff factor (whose value denotes the number of particles each formula unit of the dissolved substance dissociates into in water), [tex]K_b[/tex] is the boiling point elevation constant, and [tex]m[/tex] is the molality (moles of solute/kilogram of solvent) of the solution.
Right off the bat, since we're dealing with a non-electrolyte, the dissolved substance can be assumed not to dissociate in water. So, our van ‘t Hoff factor, [tex]i[/tex], would be 1 (by contrast, the [tex]i[/tex] for an ionic compound like NaCl would be 2 since, in water, NaCl would dissociate into two particles: one Na⁺ ion and one Cl⁻ ion). We're also given our [tex]K_b[/tex], which is 0.51 °C/m.
Assuming the normal boiling point of pure water to be 100 °C (a defined value for sig fig purposes), the change in boiling point from having dissolved 35.0 g of the non-electrolyte can be obtained by subtracting 100 °C from the final—elevated—boiling point of 101.25 °C:
[tex]\Delta T_b = 101.25\text{ }^o\text{C} - 100\text{ }^o\text{C} = 1.25\text{ }^o\text{C}[/tex]
Now, recall what we're asked to determine: the molecular mass of the dissolved substance. There is one unknown left in the equation: the molality of the solution. Let's first solve for that:
[tex]m = \frac{\Delta T_b}{K_b} = \frac{1.25^\text{ o}\text{C}}{0.51^\text{ o}\text{C}/m} \\ m = 2.45 \text{ mol solute/kg water}.[/tex]
Notice that we didn't include the i since its value is 1.
Now, what would happen if we multiplied our molality by the mass of water we've been given? We would be left with the moles of solute. And what are we asked to find? The molecular mass, or the mass per mole. We can accomplish this in two steps. Remember to convert your mass of water to kilograms:
[tex]2.45 \text{ mol solute/kg water} \times 0.045 \text{ kg water} = 0.110 \text{ mol solute.}[/tex]
And, finally, we divide the mass of our solute by the number of moles of solute:
[tex]\frac{35.0 \text{ g solute}}{0.110 \text{ mol solute}} = 317.5 \text{ g/mol}[/tex]
Our answer to two significant figures (which is the number of sig figs to which our [tex]K_b[/tex] is given) would be 320 g/mol.
NEED HELP ASAP!!!
Please choose correctly!!
Will mark brainliest thank you!!!
When using pH paper, the pH of a solution can be determined by looking at the _______ of the paper.
CO2 + H2O --> C2H2 + O2
Answer:
C2H2 + 5 O2 = 4 CO2 + 2 H2O
Add / Edited: 27.09.2014 / 25.01.2015
Evaluation of information: 5.0 out of 5 / number of votes: 2
Source: https://chemiday.com/en/reaction/3-1-0-339
Explanation:
temperature is defined as the average kinetic energy of the molecules. what is the temperature reading when all molecules completely stop vibrating?
A.0 degrees F
B. 0 degrees C
C.0 degrees K
D.273 degrees K
Answer:
Temperature is the average kinetic energy of the molecules. Absolute zero is the temperature where molecular motion stops and is the lowest possible temperature. ... The relationship between Celsius and Kelvin temperature scales is given by K = °C + 273.15.5
so the answer is B
MARK ME A BRAINLIEST
What does the skeleton do
Explanation:
"The skeletal system works as a support structure for your body. It gives the body its shape, allows movement, makes blood cells, provides protection for organs and stores minerals"
PLS HELP!!! i have no idea what this could be
Answer:
121.5g
Explanation:
from the equation:
2mol of Al react to give 3 mol of Zn
i.e 81g of Al will give 3×81/2 = 243/2 = 121.5g
b) Write a few paragraphs describing the chemical reaction and explaining the energy change in the reaction. Your document should: i. identify the reactants and products. ii. describe the change in energy that occurs as bonds are broken and formed. iii. identify how the potential energy of the reactants compares to the potential energy of the products. iv. state and explain the net change in enthalpy. v. identify whether the reaction is endothermic or exothermic. vi. explain how energy is conserved between the reaction and the surrounding environment.
Answer:
The energy change in a chemical reaction is due to the difference in the amounts of stored chemical energy between the products and the reactants. This stored chemical energy, or heat content, of the system is known as its enthalpy.
Explanation:
if u want to u can give me the crown btw have a good day
Answer:
here is what i put for this project:
The reaction in this project is exothermic. The energy change in a chemical reaction is due to the difference in the amounts of stored chemical energy between the products and the reactants. This stored chemical energy, or heat content, of the system is known as its enthalpy. The potential energy in reactants is higher than the potential energy of products in an exothermic reaction. Since energy is given off, the products are lower in energy than the reactants. The energy that is given off is a result of the formation of new bonds.
The change of the enthalpy happening in the chemical reaction is different from the pathway in between the initial and the final states. The addition of the equation gives the net change of the enthalpy. Enthalpy change is the amount of heat evolved or absorbed in the reaction under constant pressure. This can be calculated by checking the amount of heat evolved during the reaction. This reaction occurs at a constant pressure.
What causes warm air to rise?
a. The fact that it's less dense than cold air.
b. The fact that it weighs more than cold air.
c. The fact that it has higher pressure than cold air.
d. The fact that it's more dense than cold air.
How many electrons can each individual orbital hold?
Answer:
Orbitals of equal energy are each occupied by one electron before any orbital is occupied by a second electron, and all electrons in singly occupied orbitals must have the same spin state. Noble-gas configuration refers to an outer main energy level occupied, in most cases, by eight electrons.
Explanation:
I hope this helps you.
Answer:
Two electrons
Explanation:
Each individual orbital can hold a maximum of two electrons. Hope this helps :)
Urgent please help!!!
Describe what you think is your responsibility in taking care of the natural
world in which you live.
Answer:
Well I would say " I think my responsibility is recycling, gardening, picking up litter, and using less pollution. All of this stuff is very important. Sometimes, it's the tiny things that change the world for the better."
I hope this helped! Feel free to add your own little tweaks.
The empirical formula of a compound is CH. Its molecular mass is 70.14 g.
What is the factor? |
What is its molecular formula? (Write your formula without any space A2B3)
___________ mL = 2.2 L
Answer:
2,200 mL I believe it is.
Answer:
2,200 is the answer of your question
Help ASAP!!!!10 Points
The sun’s mass is about 30 million times greater than the moon. Why does the gravitational pull between Earth and the moon affect Earth’s tides more than the gravitational pull between Earth and the sun?
a The moon is denser than the sun.
b The moon is closer to Earth than the sun.
c The moon has phases, but the sun does not.
d The moon orbits Earth, but the sun does not.
Answer:
B
Explanation:
stronger gravitational gradient
2H20 → 2H2 + O2
Type of reaction?
Answer:
Notice how the elements splitIt is a decomposition reaction I do exams and quizzes if ur interestedSuppose you weigh the unknown substance on an electronic balance and find it has a mass of 445 grams. Analyzing the products of decomposition, you find that the masses of the elements in the sample are 232 grams of carbon, 58 grams of hydrogen, and 155 grams of oxygen. Finally, through further experimentation, you determine that the molar mass of the compound is 46.07 grams/mole.
Calculate the amount, in moles, of each component element in your substance. Use the periodic table to help you find the necessary molar masses.
____ moles of carbon
____ moles of hydrogen
____ moles of oxygen
Answer:
19.32 = moles of carbon
57.54 = moles of hydrogen
9.69 = moles of oxygen
Explanation:
232 g carbon × 1 mol C / 12.011 g C= 19.32 mol C
58 g hydrogen × 1 mol H / 1.008 g H = 57.54 mol H
155 g oxygen × 1 mol O / 15.999 g O = 9.69 mol O
how does a drupe fruit differ from a hesperidum fruit.
Answer:
hi
Explanation:
Answer:
Fleshy Fruits: All of most of the ovary wall (pericarp) is soft or fleshy at maturity. ... partitions, juicy seed vesicles, and a leathery exocarp similar to a hesperidium. ... This is a very common dry fruit found in many different plant families.
Explanation:
Describe the natural processes which remove carbon dioxide from the atmosphere
Answer:
Explanation:
The process is photosynthesis as plants need carbon dioxide and humans need oxygen so plants release oxygen which humans breath/take in and plant/trees take in carbon dioxide which humans release.
The natural process which removes carbon dioxide from the atmosphere is photosynthesis.
What is photosynthesis?
It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy through the process of cellular respiration.
Some of the energy which is converted is stored in molecules of carbohydrates like sugar and starches which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.
The process begins with proteins absorbing light energy which are called reaction centers and contain a green pigment which is called chlorophyll . In plants ,these pigments are present inside organelles called chloroplasts while in bacteria they are present in plasma membrane.
Learn more about photosynthesis,here:
https://brainly.com/question/29764662
#SPJ2
You are watching the Indy 500 car race on television with your brother. He says, "Did you know that these cars race at a speed of over 200 mph? That velocity is amazing!" Having learned that speed and velocity are not the same, you decide to explain the difference to your brother.
Answer:
See explanation
Explanation:
All physical quantities are broadly classified into scalar quantities and vector quantities.
Scalar quantities have magnitude but do not have direction. Vector quantities have both magnitude and direction. Hence the main difference between a scalar quantity and a vector quantity is that a vector has direction while a scalar quantity does not.
Speed is a scalar quantity while velocity is a vector quantity. You have just specified a magnitude of 200 mph without mentioning its direction. This implies that you are referring to speed of the cars in the race and not velocity because velocity of the cars must indicate the direction!
Which substance is the least toxic?
a. chlorine (LD50 = 850 mg/kg)
b. vitamin A (LD50 = 2000 mg/kg)
c. cola (LD50 = 140 mg/kg)
d. aspirin (LD50 = 200 mg/kg)
Answer:
I believe it's D. I searched up a lethal table chart and it states Aspirin is even more toxic than chlorine. As for the other two, it didn't specifically state it was toxic with one dose - meaning you have to take more than one dose for toxicity to take effect.
Explanation:
Hold the slides for observation
Whats the correct answer ?
Help pleaseedeeeeeeeeeeeeeeee
Answer:
the answer to this question here is A
Explanation:
trust me
Answer:
Acid and Salt
Explanation:
Common hydrogen compounds
Hydrogen combines with other elements, forming a number of compounds, including common ones such as water (H2O), ammonia (NH3), methane (CH4), table sugar (C12H22O11), hydrogen peroxide (H2O2) and hydrochloric acid (HCl), according to Jefferson Lab.
is mending a broken bone chemical change and why(short answer pls)
Answer:
In a physical change, the substances involved retain their original properties. A new substance is not formed. A physical change can be reversed. Chemical changes happen on a molecular level when two or more substances chemically bond together.
Mending a broken bone is a chemical change as to heal the bone enzymes are released which are chemicals.
What is a chemical change?Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical change,here:
https://brainly.com/question/23693316
#SPJ2
What is the molar mass of methane (CHA)?
A. 16.05
grams
O B. 13.02 grams
O C. 49.05 grams
O D. 10 grams