Answer:
Acceleration
Explanation:
Answer: Acceleration
Explanation:
what is a Lever?
what is wedge
what is a inclined Plane/screw
what is a wheel and axle
what is a Pulley?
Answer:lever
Explanation:
Based on the data, which statement describes the most reliable way to
encode and transmit data and tells why?
A. Digital waves are more reliable because they are less likely to
change when copied.
B. Analog waves are more reliable because they include a range of
values like the original.
C. Analog waves are more reliable because they are less likely to
change when copied.
D. Digital waves are more reliable because they are slightly different
from the original.
Answer:it’s A. right for ape x
Explanation:
Based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
What is a wave?A wave is a periodic distortion capable of traveling through a suitable media (either air or water).
The waves can be classified according to their direction into transversal and perpendicular.In conclusion, based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
Learn more on waves here:
https://brainly.com/question/15663649
#SPJ2
Review Conceptual Example 6 as background for this problem. A car is traveling to the left, which is the negative direction. The direction of travel remains the same throughout this problem. The car's initial speed is 17.8 m/s, and during a 4.68-second interval, it changes to a final speed of (a)23.5 m/s and (b)15.3 m/s. In each case, find the acceleration (magnitude and algebraic sign).
Answer:
(a) 1.21 m/s² (b) 1.75 m/s²
Explanation:
The initial speed of the car, u = 17.8 m/s
Case 1.
Final speed of the car, v = 23.5 m/s
Time, t = 4.68-s
Acceleration = rate of change of velocity
[tex]a=\dfrac{23.5 -17.8 }{4.68}\\\\a=1.21\ m/s^2[/tex]
Case 2.
Final speed of the car, v = 15.3 m/s
[tex]a=\dfrac{23.5 -15.3}{4.68}\\\\a=1.75\ m/s^2[/tex]
Hence, this is the required solution.
Acceleration is the change in the velocity of a body with time.
What is acceleration?The term acceleration is the change in the velocity of a body with time. We have to find the acceleration in two separate cases;
Case 1;
a = -(23.5 m/s - 17.8 m/s)/4.68-s
a = -1.2 m/s^2
Case 2;
a = -(15.3 m/s - 17.8 m/s)/4.68-s
a = 0.53 ms-2
Learn more about acceleration: https://brainly.com/question/12134554
Heart Disease is the number one cause of preventable death in the United States
A True
B False
Heart disease is the leading cause of death for both men and women. This is the case in the U.S. and worldwide. More than half of all people who die due to heart disease are men.
TRUE
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer:
10 J.
Explanation:
Given that,
Net force acting on the rake, F = 2 N
Distance moved by the rake, d = 5 m
We need to find the kinetic energy gained by the rake. We know that,
Kinetic energy = work done
So,
K = F×d
K = 2 N × 5 m
K = 10 J
So, 10 J of kinetic energy is gained by the rake.
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer: 10 J
What are used to measure temperature.
Answer:
A thermometer is an instrument that measures temperature.
Explanation:
Pulling a rubber band back and then letting it fly across the room is an example of
A. converting energy to work
B. converting elastic energy to gravitational
C. converting kinetic energy to potential
Answer:
b
Explanation:
because a elastic band uses elastic energy
A toy car accelerates uniformly from rest at a constant rate. The car travels 1.0 meters in 1.0 seconds. The acceleration of the car is ________ meters per second squared.
Answer:
a=1m/s^2
Explanation:
1÷1÷1=1m/s^2
Pls help!!
1 example of a conductor and 1 example of a insulator in your EVERYDAY world.
Answer:
here
Explanation:
Examples of insulators include plastics, Styrofoam, paper, rubber, glass and dry air.
Examples of conductors include metals, aqueous solutions of salts
HELP ASAP PLS
A balloon with a positive charge will stick to a wall that has a negative charge.
What force causes this?
A. Gravity
B. Electric force
C. Magnetic force
D. Air gesistance
which particles do not affect the stability of the atom
Electrons are the particle pr4esent inside the atom that does not affect the stability of the atom,
What is radioactivity?The ability of some unstable atoms to emit nuclear radiation spontaneously, typically in the form of alpha or beta particles frequently accompanied by gamma rays, is known as radioactivity.
An overabundance of neutrons or protons can make the nucleus of an atom unstable.
A radioactivity atom will try to become stable by extruding other particles, such as protons or neutrons, or by releasing energy in various ways.
Thus, Electrons are the particle present inside the atom that does not affect the stability of the atom,
To learn more about radioactivity here, refer to the link;
https://brainly.com/question/13950350
#SPJ2
The nearest neighbor interaction force is of magnitude 481 nanoNewtons, e.g., the magnitude of the force of the leftmost electron on the proton, or the magnitude of the force of any of the three on its nearest neighbor electron. Calculate the size of the net force on the leftmost proton.
Answer:
F = 120.25 10⁻⁹ N
Explanation:
In this exercise, the force between the closest neighbors is indicated by f = 481 10⁻⁹ N, in general between the one-dimensional solid the distances remain the same, if the distance between the first neighbor is d, the distance between the second neighbors is 2d.
For most solids the attractive forces are electrical, therefore force is proportional to the electrical charges and the inverse of the distance squared,
F = [tex]k \frac{q_1 q_2}{r^2}[/tex]
if we call fo the force for the first neighbors
F₀ = k \frac{q_1 q_2}{d^2}
the force for the second neighbors r= 2d
F = k \frac{q_1 q_2}{(2d)^2}
F = F₀ / 4
let's calculate
F = 481 10⁻⁹ / 4
F = 120.25 10⁻⁹ N
Which formula is used to find an objects acceleration
Answer:
a=∆v/∆t
Explanation:
The definition of Acceleration is the change in velocity in a given time. So this means you first calculate ∆v (Change in velocity), and you calculate ∆t which is the time taken to apply that change in velocity. Then you find a= ∆v/∆t. This gives us the equation of Acceleration.
Answer:
C. a=∆v/∆tExplanation:
What is the mass of a block concrete that gains 52,800 joules of energy when its temperature is increased by 5 degrees Celsius specific heat of concrete 880 J/K degrees Celsius
Answer:
12 kg
Explanation:
q = 52,800 J
c = 880 J/(kg * K) Pretty sure you missed the kg here
ΔT = 5 °C = 5 K (reminder that this only applies to ΔT and not T)
q = mcΔT ⇒ m = q/(cΔT) = 52,800 J / (880 J/(kg * K) * 5 K) = 12 kg
The mass of a block concrete that gains 52,800 joules of energy when its temperature is increased by 5 degrees Celsius specific heat of concrete 880 J/K degrees Celsius is 12kg
The formula for calculating the quantity of heat energy absorbed by the block is expressed as:
Q = mcΔt
Q is the quantity of heat = 52,800 Joules
m is the mass of the concrete
c is the specific heat of concrete = 880 J/K
Δt is the change in temperature = 5 degrees
substitute the given values into the formula:
[tex]52800=m(880)(5)\\52800 = 4400m\\m=\frac{52800}{4400}\\m= 12kg[/tex]
Hence the mass of a block of concrete that gains 52,800 joules of energy when its temperature is increased by 5 degrees Celsius specific heat of concrete 880 J/K degrees Celsius is 12kg
Learn more here: https://brainly.com/question/22991121
Two loudspeakers are about 10 mm apart in the front of a large classroom. If either speaker plays a pure tone at a single frequency of 400 HzHz, the loudness seems pretty even as you wander around the room, and gradually decreases in volume as you move farther from the speaker. If both speakers then play the same tone together, what do you hear as you wander around the room
Answer:
I hear points of low volume sound and points of high volume of sound.
Explanation:
This is because, since the two sources of sound have the same frequency and are separated by a distance, d = 10 mm, there would be successive points of constructive and destructive interference.
Since their frequencies are similar, we should have beats of high and low frequency.
So, at points of low frequency, the amplitude of the wave is smallest and there is destructive interference. The frequency at this point is the difference between the frequencies from both speakers. Since the frequency from both speakers is 400 Hz, we have, f - f' = 400 Hz - 400 Hz = 0 Hz. So, the volume of the sound is low(zero) at these points.
Also, at points of high frequency, the amplitude of the wave is highest and there is constructive interference. The frequency at this point is the sum between the frequencies from both speakers. Since the frequency from both speakers is 400 Hz, we have, (f + f') = 400 Hz + 400 Hz = 800 Hz. So, the volume of the sound is high at these points.
So, as you wander around the room, I should hear points of high and low sound across the room.
Which of the following is a physical quantity that has a magnitude but not
direction?
- vector
- frame of reference
- scalar
- resultant
Answer:
Scalar
Explanation:
A scalar quantity is a physical quantity that has magnitude but no directional attribute.
An example of a scalar is speed and distance.
A vector is a physical quantity that has both magnitude and direction.
An example is displacement and velocity.
Scalar has only the magnitude value specified and nothing else.
6 An object can never have
A. a positive speed.
B. a negative speed.
C. a positive velocity.
D. a negative velocity.
Answer:
B
Explanation:
Speed is the magnitude of the velocity vector, so it can never be negative.
An object can never have a negative velocity. Therefore, option (D) is correct.
What is velocity?Velocity is a vector quantity that describes an object's speed and direction of motion. If an object is moving in a positive direction, it has a positive velocity. If it is moving in the opposite direction, it has a negative velocity.
However, an object can never have a negative speed. Speed is a scalar quantity that describes an object's rate of motion, and it is always positive. The speed of an object can be positive or negative, depending on the direction of its velocity, but the magnitude of its speed is always positive.
Learn more about velocity, here:
https://brainly.com/question/18084516
#SPJ6
Describe the political actions that led to successful conservation in both stories.
Answer:
The political actions that led to successful conservation in both stories were what they call an FC company that makes the forest industry true. They make it out of a factory and it can make it very successful and accomplished.
Explanation:
Which of the following is NOT a characteristic of noble gases?
unreactive
odorless
solid at room temperature
colorless
Do You think History is the most important subject that deserves first place? Do you see a way that learning history could assist you in your future career?
yes
Explanation:
history is an important class and it helps to you understand what went on in the past so that we can learn from our mistakes and help us grow
Answer this and you get 100 points
You better answer it quick though
Answer what? Apologies, but I don't see anything. (。>︿<)
What quantity measures the amount of space an object occupies?
A. Volume B.Temperature C. Mass D. Density
Answer:
mas
Explanation:
mass is the amount of space something occupies.
A 4-stroke heat engine in an automobile is
used to
A convert mechanical energy into heat
energy.
B convert heat energy into mechanical
energy.
с convert steam into solar energy.
D convert chemical energy into electrical
energy.
Answer:
b
Explanation:
convert heat energy into mechanical
50 points Two waves combine with constructive interference. What must be true of the
combined wave that forms?
A. It has a lower frequency than that of the original waves.
B. It has a higher amplitude than that of the original waves.
C. It has a higher frequency than that of the original waves.
D. It has a lower amplitude than that of the original waves.
Answer:
it has a higher amplitude than that of the original waves
Explanation:
trust me its right
The two waves combined with constructive interference have a higher amplitude than the original wave.
Which wave has the highest amplitude?High energy waves are characterized by high amplitude. Low energy waves are characterized by their small amplitude. As explained in Lesson 2, wave amplitude is the maximum amount of particle movement on a medium from a resting position.
What are superposition and interference?Superposition is a combination of two waves in the same place. Constructive interference occurs when two identical waves interfere in phase. Destructive interference occurs when two identical waves are exactly out of phase and overlap.
Learn more about higher amplitude waves at
https://brainly.com/question/19036728
#SPJ2
How do projectors project the color black?
Answer:
Projectors do not project the color black. This makes sense since black is really the absence of light, and you can't project something that does not exist. When a projector sends a beam of light on to a wall or a projector screen so that an image is formed on the wall or screen, the parts of the image that look black are really a very dim white color (which we sometimes call gray). - wtamu
Answer is:
Projectors do not project the color black.
A 0.500 cm diameter plastic sphere, used in a static electricity demonstration, has a uniformly distributed 44.0 pC charge on its surface. What is the potential near its surface
Answer:
Explanation:
Radius of sphere R = .250 x 10⁻² m
Potential on the surface V = k Q / R , where Q is charge on the surface , R is radius of the surface and k = 9 x 10⁹
Q = 44 x 10⁻¹² C
V = 9 x 10⁹ x 44 x 10⁻¹² / ( .25 x 10⁻²)
= 1584 x 10⁻¹ Volt .
= 158.4 Volt
Hearing rattles from a snake, you make two rapid displacements of magnitude 1.8 m and 2.4m. Draw sketches, roughly to scale, to show how your two displacements might add to give the following resultant of magnitudes.
a. 4.2 m
b. 0.6 m
c. 3.2 m
Answer:
The answer is a 4.2m
Explanation:
Given data
Please see attached the rough drawing for your reference.
From the drawing, you ran 18m west and 2.4m south
The displacement is
= 1.8+2.4
=4.2m
Please help! This is due in 10 minutes
Answer:
Atom - the basic particle of matter
Density - calculated from measurements of mass and volume
Motion - calculated from measurements of distance and time
Energy - can change form and move matter
Matter - the scientific word for stuff
Hope this helps! Please mark brainliest if correct :D
Could I get help on this question please
Answer:
124.51 m
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 49.4 m/s
Final velocity (v) = 0 m/s (at maximum height)
Maximum height (h) =?
NOTE: Acceleration due to gravity (g) = 9.8 m/s²
The maximum height to which the cannon ball attained before falling back can be obtained as illustrated below:
v² = u² – 2gh ( since the ball is going against gravity)
0² = 49.4² – (2 × 9.8 × h)
0 = 2440.36 – 19.6h
Collect like terms
0 – 2440.36 = –19.6h
–2440.36 = –19.6h
Divide both side by –19.6
h = –2440.36 / –19.6
h = 124.51 m
Therefore, maximum height to which the cannon ball attained before falling back is 124.51 m
how is friction involved in the movement of space
Answer:
Friction can stop or slow down the motion of an object.
Explanation:
The slowing force of friction always acts in the direction opposite to the force causing the motion.