Electricity is possible because atoms release and absorb which sub-atomic particle?
Answer:
Electrons
Electric charge is carried by subatomic particles such as electrons and protons, which can be created and destroyed. For example, when particles are destroyed, equal numbers of positive and negative charges are destroyed, keeping the net amount of charge unchanged.
What is created when an acid is mixed with a base?
Answer:
If you mix equal amounts of a strong acid and a strong base, the two chemicals essentially cancel each other out and produce a salt and water. Mixing equal amounts of a strong acid with a strong base also produces a neutral pH (pH = 7) solution.
In an electrical circuit, the presence of a resistor limits the current and prevents
damage related to short circuits.
True or
False
bond. Water is a polar solvent. The oxygen atom, being more electronegative, attracts the electron cloud toward itself. As the electron cloud is pulled by the oxygen atom, it carries a partial negative charge, and the hydrogen atoms carry a partial positive charge. This partial separation of charges in the water molecule makes it polar. Which intermolecular forces contribute to the dissolution of NaCl in water
Answer:
NaCl and water: Ion - Dipolo forces
NaCl and Hexane: Ion-ion force between Na+ and Cl− ions and London dispersion force between two hexane molecules
Explanation:
NaCl and water:
The ion-dipole force is established between an ion and a polar molecule. Polar molecules are dipoles, they have a positive end and a negative end.
H2O has an important charge separation in its atoms (the H has a positive partial charge and the O has a negative partial charge) and this causes permanent electrical dipoles in the water molecules.
Sodium chloride is an ionic compound formed of positive and negative charge ions, Na + and Cl-. Depending on their charge, these ions will be attracted to opposite charges in the water molecules (H attracts chloride ions and O attracts sodium ions), causing the salt to dissolve in water.
Explanation:
If a compressed air cylinder for scuba diving contains 6.0 L of gas at 18°C and 200 atm pressure, what volume does the gas occupy at 1.0 atm and 25°C?
Answer:
[tex]V_2=1228.9L[/tex]
Explanation:
Hello there!
In this case, given the pressure, temperature and volume of the gas, we notice that we need the combined ideal gas as shown below:
[tex]\frac{P_2V_2}{T_2} =\frac{P_1V_1}{T_1}[/tex]
Thus, solving for the final volume, V2, we would obtain:
[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]
Now, we plug in the data and make sure the temperature must be in Kelvins to obtain:
[tex]V_2=\frac{200atm*6.0L*(25+273)K}{(18+273.15)K(1.0atm)}\\\\V_2=1228.9L[/tex]
Best regards!
PLEASE HELP ASAP
A sample of a gas has a volume V1 = 3L at a temperature T1 = 290K. Determine V2 when the temperature is T2
= 700K, while the pressure remains constant.
a.- 7.00L
b.- 7.24L
c.-2.74L
If the pH of a solution is 1.5 , calculate [H^ + ] .
Help plz??
Answer: Thus hydrogen ion concentration is 0.031622777
Explanation:
pH or pOH is the measure of acidity or alkalinity of a solution.
pH is calculated by taking negative logarithm of hydrogen ion concentration.
[tex]pH=-\log [H^+][/tex]
Putting in the values:
[tex]1.5=-\log[H^+][/tex]
[tex][H^+]=10^{-1.5}=0.031622777[/tex]
Thus hydrogen ion concentration is 0.031622777
How many grams (g) are in 4.00 moles of Carbon (C) ?
Answer:
There are 36 grams in 4.00 moles of Carbon.
Explanation:
In order to convert from moles of a substance into grams of the same substance, we need to use the substance's molar mass.
That means that in this case we use the molar mass of Carbon:
4.00 mol * 12 g/mol = 36 gThus, there are 36 grams in 4.00 moles of Carbon.
What is neutralisation reaction? Give an example with reaction involved. State two uses of neutralisation reaction in everyday life.
Answer:
neutralization reaction is when an acid and a base react to form water and salt and involves the combination of hydrogen ions and hydroxyl ions to generate water. The neutralization of a strong acid and strong base has a pH equal to 7.
PLEASE HELPPP WILL GIVE 10 PTS AND MARK BRAINIEST TO RIGHT ANSER!!!!!
Roasted coffee beans contain over_____________ chemical compounds
A) 10000000
B) 1000000
C) 1000
D) 10000
Answer:
C. 1000
l think this is correct answer
l hope it's helpful for you
Which of the following compounds is least soluble in water?
A) iron (III) chloride
B) ammonium acetate
C) sodium hydroxide
D) magnesium carbonate
Answer:
B
Explanation:
Which expression represents the concentration of OH– in solution?
a. 10–14 / [H3O+]
b. [OH–] / 10–14
c. 10–14 – [H3O+]
d. 10–14 x [H3O+]
What are the two types of bonding we have studied?
a. Metallic and covalent
b. Covalent and ionic
c. lonic and metallic
d. Molecular and metallic
Answer:
B: Covalent bond and Ionic bond
What happened during the fusion reaction shown? 2H Зн 4He neutron O A. Two H nuclei fused into one He nucleus. O B. One He nucleus split into two H nuclei. O C. The nuclei that fused lost all their neutrons. D. The nuclei that fused lost some of their protons.
Answer: C.
Explanation:
two H nuclei fused into one He nucleus
Answer: A!
Explanation: just did it
plz, help me I'm so confused!
(this is also science)
Answer:
Well, there is no photo...
Explanation:
A student uses 200 grams of water at a temperature of 60 °C to prepare a saturated solution of potassium chloride , KCI. Identify the solute in this solution.
1. H2O(l)
2. KCl (aq)
3.K + (aq)
4.KCl(s)
Answer:
4. KCl(s)
Explanation:
KCl is an ionic salt that dissolves in water to form a KCl aqueous solution.
A solution is defined as the homogeneous mixture of one or more solutes dissolved in a solvent. Here in the saturated solution of potassium chloride, the solute is KCl. The correct option is 4.
What is a solute?A solute is defined as the substance which is dissolved in a solution. In a solution the amount of the solute present is always smaller than the amount of the solvent. For example in a salt solution, salt dissolves in water and therefore salt is the solute.
The particles of the solute present in a solution cannot be seen by our eye. The solute from a solution is not possible to separate by filtration. In an unsaturated solution, the concentration of the solute is much lower than that of the concentration of the solvent.
A solution is a combination of the solute and the solvent.
Thus the correct option is 4 - KCl.
To know more about solute, visit;
https://brainly.com/question/13812915
#SPJ2
What is the final molarity of a solution when 250 mL H2O is added to 150 mL
0,040 M NaOH(aq)?
Answer:
0.015M is the final molarity of the NaOH solution
Explanation:
A solution of 0.040M NaOH is diluted from 150mL to 250mL + 150mL = 400mL. That means the solution is diluted:
400mL / 150mL = 2.667 times.
As the original solution has a concentration of 0.040M, the diluted solution has a concentration of:
0.040M / 2.667 =
0.015M is the final molarity of the NaOH solutionCalculate the number of miles of magnesium,chlorine, and oxygen atoms in 5.00 moles of magnesium perchlorate
Answer:
5.00 mol Mg
10.0 mol Cl
40.0 mol O
Explanation:
Step 1: Given data
Moles of Mg(ClO₄)₂: 5.00 mol
Step 2: Calculate the number of moles of Mg
The molar ratio of Mg(ClO₄)₂ to Mg is 1:1.
5.00 mol Mg(ClO₄)₂ × 1 mol Mg/1 mol Mg(ClO₄)₂ = 5.00 mol Mg
Step 3: Calculate the number of moles of Cl
The molar ratio of Mg(ClO₄)₂ to Cl is 1:2.
5.00 mol Mg(ClO₄)₂ × 2 mol Cl/1 mol Mg(ClO₄)₂ = 10.0 mol Cl
Step 4: Calculate the number of moles of O
The molar ratio of Mg(ClO₄)₂ to Cl is 1:8.
5.00 mol Mg(ClO₄)₂ × 8 mol O/1 mol Mg(ClO₄)₂ = 40.0 mol O
Which property increases as you move down a column in the periodic table?
A) atomic size
B) ionization energy
C) nonmetallic character
D) none of the above (all increase as you move down a column).
Answer:
A) atomic size
Explanation:
how many atoms of carbon are in a diamond with a mass of 0.568 g?
Answer:
There are 2.85 x 10^22 atoms of carbon in a diamond with a mass of 0.568 g.
Hope this helps! :)
What is the coefficient for hydrogen in the balanced equation for the reaction of solid tungsten(VI) oxide with gaseous hydrogen to form solid tungsten and liquid water?
Answer:
2
Explanation:
WO2(s) + 2H2(g) -> W(s) + 2H2O(l)
what is the answer to this question?
Answer:
A
Explanation:
According to Charles Law, volume is directly proportional to absolute temperature so because temperature is being decreased in this case, the volume will also decrease.
What chemical test to differentiate propane and propene
Answer:
If you add bromine water, an aqueous solution of bromine, to the test tubes, you can tell which is propene, the alkene. The bromine reacts with and saturates the double bonds in alkenes, and so decolourises.
please give brainly
Is c6h4cl2 soluble in water?
Answer:
slightly but poorly
Explanation:
it is a white crystalline solid that is practically insoluble in water and soluble in ether, chloroform, carbon disulfide, benzene, alcohol and acetone.
Methane and sulfur react to produce carbon disulfide (CS₂), a liquid often used in the production of cellophane.
2CH₄ + S₈ --> 2CS₂ + 4H₂S
Calculate the moles of H₂S produced when 2.25 mol S₈ is used.
Answer:
9 moles
Explanation:
The balanced chemical equation provided in this question is as follows:
2CH₄ + S₈ → 2CS₂ + 4H₂S
In accordance to the above balanced equation, 1 mole of sulphur (S8) produces 4 moles of hydrogen sulfide (H2S).
Therefore, if 2.25mol of S8 is used, 2.25 × 4 = 9 mol
9 moles of H2S is produced.
17. The equation below represents a chemical reaction that occurs in living cells.
CoH1206 + 602 -- 6002 + 6H20 + energy
How many atoms are represented in the reactants of this equation?
Answer:
36 atoms
Explanation:
C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O + energyThe reactants are in the left side of the equation. First we determine how many atoms are there in the C₆H₁₂O₆ molecule:
6 C atoms + 12 H atoms + 6 O atoms = 24 atoms in totalThere are two atoms in a O₂ molecule, and there are 6 O₂ molecules in the equation:
2 * (6 O atoms) = 12 atoms in totalThe total number of atoms in the reactants is
24 + 12 = 36 atomsEaterfication experiment
Answer:
Do you mean Esterification experiment?
Explanation:
You are given 19.2 liters of H3PO4. How many moles do you have?
Answer:
Explanation:
Do a quick conversion: 1 grams H3PO4 = 0.010204583427424 mole using the molecular. How many grams H3PO4 in 1 mol? You can view more details on each measurement unit: molecular weight of H3PO4 or mol This. The formula weight is simply the weight in atomic mass units of all the atoms in a given formula.
b) Name three substances which can undergo sublimation and deposition respectively
solid carbon dioxide, iodine, arsenic, and naphthalene
Explanation:
Examples of substances that undergo sublimation
Examples of solids that sublime are dry ice (solid carbon dioxide), iodine, arsenic, and naphthalene (the stuff mothballs are made of).
Acid formulas usually start with ______________ because they have hydrogen atoms combined with other atoms in their molecules
Answer:
H
Explanation:
Example,
HCl for hydrochloric acid
H2SO4 for sulphuric acid
HNO3 for nitric (v) acid