Answers
1. All the relevant resistors are in series, so the total (or equivalent) resistance is the sum of the resistances of the resistors: 20 Ω + 80 Ω + 50 Ω = 150 Ω [choice A].
2. The ammeter will read the current flowing through this circuit. We can find the ammeter reading using Ohm's law in terms of the electromotive force provided by the battery: I = ℰ/R = (30 V)(150 Ω) = 0.20 A [choice C].
3. The voltmeter will measure the potential drop across the 50 Ω resistor, i.e., the voltage at that resistor. We know from question 2 that the current flowing through the resistor is 0.20 A. So, from Ohm's law, V = IR = (0.20 A)(50 Ω) = 10. V, which will be the voltmeter reading [choice F].
4. Trick question? If the circuit becomes open, then no current will flow. Moreover, even if the voltmeter were kept as element of the circuit, voltmeters generally have a very high resistance (an ideal voltmeter has infinite resistance), so the current moving through the circuit will be negligible if not nil. In any case, the ammeter reading would be 0 A [choice B].
Related Questions
Which of the following ways of writing 1000w is incorrect?
1) 1 kW
2) 1 x 10³ W
3) 10 x 10³ W
4) 1.0 x 10³ W
Answers
Answer:
the third one is incorrect
Explanation:
10 x 10³= 10^1 x 10^3 = 10^4
PLEASE ANSWER THIS ASAP I WILL MARK YOU THE BRAINLIEST The actual subject is Science but they dont have that as a option in pick a subject
Answers
Answer:
Third option
Explanation:
To calculate meters per second you divide the distance by the time.
it's 8m/s
Match the choices below to the correct description. Drag the terms on the left to the appropriate blanks on the right. ResetHelp blank − this body wave is a compressional wave. − this body wave is a compressional wave. blank − this body wave is a shear wave. − this body wave is a shear wave. blank − this surface wave moves from side to side. − this surface wave moves from side to side. blank − this surface wave moves up and down. − this surface wave moves up and down.
Answers
Answer: hello the terms are missing but I have provided the answer ( the terms and matched them properly
answer :
P WAVESS WAVESL WAVESR WAVESExplanation:
This body wave is a compressional wave : P WAVES
This body wave is a shear wave : S WAVES
This surface wave moves from side to side : L WAVES
This surface wave moves up and down. : R WAVES
A body wave is a type of wave that passes through the interior of the earth and they are classified as ; P and S waves while surface waves are seismic waves that travel near the earth's surface
Two resistors, 2.50 Ω and 4.95 Ω, are wired in series to a 12.00 V battery. What is the equivalent resistance of the circuit?
Answers
Answer:
7.45 Ω
Explanation:
From the question given above, the following data were obtained:
Resistor 1 (R₁) = 2.50 Ω
Resistor 2 (R₂) = 4.95 Ω
Voltage (V) = 12 V
Equivalent Resistance (Rₑq) =?
Since the resistors are in series arrangement, the equivalent resistance can be obtained as follow:
Rₑq = R₁ + R₂
Rₑq = 2.5 + 4.95
Rₑq = 7.45 Ω
Therefore, the equivalent resistance is 7.45 Ω
1. What is the magnitude of the force on a charge of +40 μC that is 0.6 m from a charge of - 80 μC?
Answers
Answer:
The magnitude of the force is 79.893 N.
Explanation:
The magnitude of the electrostatic force between the two particles is determined by Coloumb's Law, whose formula is:
[tex]F = \frac{\kappa \cdot |q_{A}|\cdot |q_{B}|}{r^{2}}[/tex] (1)
Where:
[tex]\kappa[/tex] - Electrostatic constant, in newtons-square meters per square coulomb.
[tex]q_{A}, q_{B}[/tex] - Electric charges, in coulombs.
[tex]r[/tex] - Distance, in meters.
If we know that [tex]\kappa = 8.988\times 10^{9}\,\frac{N\cdot m^{2}}{C^{2}}[/tex], [tex]q_{A} = +40\times 10^{-6}\, C[/tex], [tex]q_{B} = - 80\times 10^{-6}\, C[/tex] and [tex]r = 0.6\,m[/tex], then the magnitude of the force is:
[tex]F = \frac{\kappa \cdot |q_{A}|\cdot |q_{B}|}{r^{2}}[/tex]
[tex]F = 79.893\,N[/tex]
The magnitude of the force is 79.893 N.
Why must the Moon travel more than a full orbit around the Earth for the full moon to be complete?
Answers
Answer:
The difference between the sidereal and synodic months occurs becuase as our moon moves around the earth, the earth also moves around our sun. Our moon must travel a little farther in its path to make up for the added distance and complete the phase cycle.
Explanation:
Hope this helps.
Is telekinesis real??? I really wanna start learning it!
Answers
Answer:
if you only have to control your chakra and know how to get all your vibes to pass it to objects and it takes time to practice
Please Help Me!!!
Water is a colorless and odorless liquid. It can exist in solid, liquid, and gas states. It boils at 100 degrees C and melts at 0 degrees C.
Which option best describes this information?
A.
These are the physical properties of water.
B.
These are the chemical properties of water.
C.
These are the physical changes water undergoes.
D.
These are the chemical changes water undergoes.
E.
These are the molecular changes water undergoes.
Answers
Answer:
There are the molecular changes water undergoes
How can I rewrite the equation a - b = d using addition?
Answers
Explanation:
A=b+d that is the way to rewrite the equation
Which equation could not be used to determine straight line acceration?
Answers
Answer:
the answer for the question is the last option
someone please helppp :|||
Answers
Answer:
b
Explanation:
Answer:
its c
Explanation:
i have asked my teacher
Please help me look at the image below
Answers
1. Why is the equivalent resistance in a parallel circuit equal to the sum of the reciprocals of the individual resistances, whereas in a series circuit, the equivalent resistance is the sum of the individual resistances?
Answers
Answer: Kirchhoff first law: sum of currents coming in branch and leaving it are same.
Explanation: in parallel circuit current is divided between resistors.
In series circuit same current passes through all resistors.
state and explain the disadvantages of anomalous expansion of water
Answers
Answer:
я не знаю старайся изо всех сил
Explanation:
[tex]\huge{\mathbb{\tt { QUESTION↓}}}[/tex]
[tex]\color{green}{\tt State \: and \: explain \: the \: disadvantages}[/tex]
[tex]\color{green}{\tt { of \: anomalous \: expansion \: of \: water}}[/tex]
[tex]\huge{\mathbb{\tt {ANSWER↓}}}[/tex]
[tex]{\boxed{\boxed{\tt { DISADVANTAGES \: of \: anomolous \: expansion \: of \: water }}}}[/tex]
Since the maximum density can be found for a positive temperature, water's own weight will prevent it from freezing from the bottom up. However, the anomalous expansion of water has some negative consequences. ... As the water freezes it expands and can rip pipes open.[tex]{\boxed{\boxed{\tt { What \: is \: the \: state \: of \: anomalous \: expansion \: of \: water? }}}}[/tex]
The anomalous expansion of water is an abnormal property of water whereby it expands instead of contracting when the temperature goes from 4o C to 0o C, and it becomes less dense. The density is maximum at 4 degree centigrade and decreases below that temperature as shown in graph#CarryOnLearning
#JustEnjoyTheSummer
→XxKim02xXHow is our magnetic field made?
Answers
Answer:
REVENGE
Explanation:
HAHAAHAHAAHAHAHA
A toy gun uses a spring to shoot plastic balls (m = 50 g). The spring is compressed by 3.0 cm. Let k=2.22 × 105 N/m. (a) Of course, you have to do some work on the gun to arm it. How much work do you have to do? (b) Suppose you fire the gun horizontally. How fast does the ball leave the gun? (c) Now suppose you fire the gun straight upwards. How high does the ball go?
Answers
Answer:
Explanation:
Given that:
mass of the plastic ball = 50 g = 50 × 10⁻³ kg
spring constant (k) = 2.22 × 10⁵ N/m
compression of spring (x) = 3.0 cm = 3 × 10⁻² m
a) Work done:
[tex]= \dfrac{1}{2}kx^2 \\ \\ = \dfrac{1}{2}\times 2.22 \times 10^{5}\times (3 \times 10^{-2})^2 \\ \\ = 99.9 \ J[/tex]
b) When the gun is fired horizontally;
In the spring, the potential energy is changed to kinetic energy.
i.e.
[tex]\implies \dfrac{1}{2}kx^2 = \dfrac{1}{2}mv^2 \\ \\ 2.22 \times 10^5 \times (3\times 10^{-2}) ^2 =50 \times 10^{-3} \times v^2\\ \\ \mathbf{v= 63.2 m/s}[/tex]
c) The max height the bullet will reach if the gun is being shot upward is:
[tex]H_{max}= \dfrac{v^2}{2g} \\ \\ H_{max}= \dfrac{63.2^2}{2\times 9.8}[/tex]
[tex]\mathbf{H_{max}= 203.9 \ m}[/tex]
What type of energy is thermal energy? A. Sound energy B. Chemical energy C. Kinetic energy D. Nuclear energy
Answers
Answer:
kinetic energy
Explanation:
A decibel measures the _____________ of sound.
A.pitch
B,frequency
C.loudness
D.amplitude
Answers
Calculate the refractive index for a substance where the angle of incidence is 300 , the angle of refraction is 600 , and the refractive index of second substance is 1.5
Answers
Answer:
η₁ = 2.6
Explanation:
Here, we will use snell's law to calculate the refractive of the substance:
[tex]\frac{\eta_2}{\eta_1} = \frac{Sin\theta_1}{Sin\theta_2}[/tex]
where,
η₁ = refractive index of first substance = ?
η₂ = refractive index of second substance = 1.5
θ₁ = angle of incidence = 30°
θ₂ = angle of refraction = 60°
Therefore,
[tex]\frac{1.5}{\eta_1} = \frac{Sin\ 30^0}{Sin\ 60^0}[/tex]
η₁ = 2.6
Tyson has been assigned to the offensive line as a left guard on his football team which requires him to make explosive movements and push other players body weight in a specific direction. Which sport skill does he demonstrate as his dominant skill based on this position assignment?
Answers
Answer:
The answer is power.
Explanation:
because in the reading it says it's his dominant skill.
and beacuse i got it right on the test.
Answer:
The answer is power.
Explanation:
how is momentum of an object related to stopping distance
Answers
Answer:
To stop a car must lose its momentum and its kinetic energy. ... If the forces on two cars are equal then the greater the kinetic energy the greater the distance before stopping. But there will be a relationship to the momentum because momentum and mass are both related to the kinetic energy.
can someone help me please? thank you
Answers
How fast is a 0.50 kg ball moving if it's kinetic energy is 400 j
Answers
Answer:
Correct 40 m/s
Explanation:
A truck with a mass of 15,000 kg moving at 25 m/s crashes into the back of a small 1,100 kg car moving at 15 m/s. They
stick together after the collision. Calculate the momentum of the system before the collision and after the collision.
Answers
Explanation:
Given that,
Mass of a truck = 15,000 kg
Speed of the truck = 25 m/s
Mass of car = 1,100 kg
Speed of the car = 15 m/s
As they stick together after the collision. Let V be the speed after the collision.
Initial momentum of the system,
[tex]P_i=15000\times25+1100\times15\\\\=391500\ kg-m/s[/tex]
Final momentum of the system,
[tex]P_f=(15000+1100)V\\\\=16100V[/tex]
Hence, this is the required solution.
What specific type of tide has the smallest difference between high and low tide?
Answers
Answer: Neap tides
Explanation: Neap tides are tides that have the smallest tidal range, and they occur when the Earth the Moon, and the Sun form a 90o angle. They occur exactly halfway between the spring tides when the Moon is at first or last quarter.
7. An object can be accelerating even if its speed is
constant if it
(a) comes to a stop
(b) is not possible
(C) changes direction
(d) moves in a straight line
Answers
Answer:
I think that the answer might be d
Answer:
D
Explanation:
If a car is moving very fast in a straight road or a highway in such a way that it has reached its limits as soon as it is going that fast it can break it limit
Which statement best summarizes the development of the atomic theory over time?
Answers
Answer:
electrons move around nucleus in specific regions
We have that the correct statement that summarizes atoms over time will be
The discovery of new evidence resulted in changes to the atomic theory.
Option B
Generally
The Image shows that in the early 1800 the knowledge of atom was limited and it increased over time and by 1920 it had gone through a 4 stages of modifications to the atomic model
Atoms are solid spheresElectrons are attached to atom surfaceElectrons move around in the nucleus in a specificRapid motion of electrons in the cloudTherefore the correct statement that summarizes atoms over time will be
The discovery of new evidence resulted in changes to the atomic theory
For more information on this visit
https://brainly.com/question/17756498?referrer=searchResults
Highlight two factors which shows that heat from the sun does reach the earth's surface by convection.
Answers
radiation
when the suns radiation fall on the earth and its objects they receive heat energy and hence get heated. Thus the suns heat reaches the earth by. the process of radiation
Absence of medium is the factor which shows that heat from the sun does reach the earth's surface by convection.
The heat of the sun reaches the earth only through radiation because radiation does not require any medium for the transfer of energy but convection and conduction required a medium to transfer heat energy.
We know that there is no medium present in vacuum so convection and conduction are impossible in a vacuum that's why the sun's heat does not reach the earth by conduction or convection.
Learn more about convection here: https://brainly.com/question/9382711
Learn more: https://brainly.com/question/22811911
A boy who is riding his bicycle, moves with an initial velocity of 5 m/s. ten second later, he is moving at 15 m/s. what is his acceleration
Answers
[tex]\Large {{ \sf {Question :}}} [/tex]
A boy who is riding his bicycle, moves with an initial velocity of 5 m/s. Ten second later, he is moving at 15 m/s. What is his acceleration?[tex]\Large {{ \sf {Given :}}} [/tex]
Initial Velocity (u) - 5 m/sFinal Velocity (v) - 15 m/sTime (t) - 10 sec[tex]\Large {{ \sf {Formulae :}}} [/tex]
If the velocity of an object changes from an initial value u to the final value v in time t, the acceleration a is, [tex]a \: = \frac{v - u}{t} [/tex][tex]\Large {{ \sf {Step-by-step explanation :}}} [/tex][tex]a \: = \frac{v - u}{t} \\ or \: \: a = \frac{(15 - 5)}{10} m \: s^{ - 2} \\ or \: \: a \: = \frac{10}{10}m \: s^{ - 2} \\ or \: \: a = 1m \: s^{ - 2} [/tex]
[tex]\Large {{ \sf {Answer :}}} [/tex]
His acceleration is [tex]1m \: s^{ - 2} [/tex]A lightbulb has 25 W stamped on it. What does this mean?
Answers
Answer:
A lightbulb has 25 W stamped on it. What does this mean?:
These labels mean that each lightbulb has Its respective power delivered to It when It Is connected to a constant
Explanation: