Why is red tide dangerous to ocean animals?

Answer:

Light reflected off objects. Color has three main characteristics: hue (red, green, blue, etc.), value (how light or dark it is), and intensity (how bright or dull it is). Colors can be described as warm (red, yellow) or cool (blue, gray), depending on which end of the color spectrum they fall.

Christ Crowned / Honthorst

Christ Crowned with Thorns, Gerrit van Honthorst, about 1620

Value describes the brightness of color. Artists use color value to create different moods. Dark colors in a composition suggest a lack of light, as in a night or interior scene. Dark colors can often convey a sense of mystery or foreboding.

Light colors often describe a light source or light reflected within the composition. In this painting, the dark colors suggest a night or interior scene. The artist used light colors to describe the light created by the candle flame.

Annunciation / Bouts

The Annunciation, Dieric Bouts, 1450–1455

Intensity describes the purity or strength of a color. Bright colors are undiluted and are often associated with positive energy and heightened emotions. Dull colors have been diluted by mixing with other colors and create a sedate or serious mood. In this image the artist captured both the seriousness and the joy of the scene with the dull gray stone interior and the bright red drapery.

Explanation:

Answer:

D) 100*C

Explanation:

Answer:

A. 0°C

Explanation:

El agua se evapora a los 0 grados

Answer:

3CaCi2 + 2Na3PO4 → Ca3(PO4)2 + 6NaCi

Explanation:

Answer:

The enthalpy of solution for AgNO3 is positive because the temperature of the solution decreases (the dissolution is endothermic). Hsol = Hsolute + Hsolvent + HmixHsolute and Hsolvent are endothermic because energy is required to overcome intermolecular forces and separate solute and solvent particles.

Answer:

the enthalpy of solution for agno3 is positive because the temperature of the solution decreases. (the dissolution is endothermic.)

Delta H sol=delta HSolute +delta H solvent +delta H mix

HSolute and H solvent are endothermic because energy is required to overcome intermolecular forces and separate solute and solvent particles.

H mix is exothermic because energy is released when intermolecular forces form between solute and solvent particles.

if the overall enthalpy of solution is positive, then HSolute + H solvent must be larger in magnitude than H mix.

Explanation:

correct on edge2021

Answer:

Reflection-energy waves bouncing off the surface of an object

Explanation:

Answer:

es correcto bro claro eres un crak

Answer:

Decomposition Reaction

Explanation:

You can determine the type of reaction by writing out a balanced equation.

Solid Potassium Chlorate: KClO3

Potassium Chloride: KCl

Oxygen Gas: O2

Balanced Equation: 2KClO3 -> 2KCl + 3O2

By definition, a decomposition reaction is when a single substance decomposes into two more simpler substances. AB -> A + B

Because the solid potassium chlorate is breaking into two substances, potassium chloride and oxygen gas, it is a decomposition reaction.

Answer:hey did you ever get an answer? I need it for this exam

Explanation:

Answer:

my answer I think is tetrahedral

Answer:

Explanation:

Here's the complete question:

A chemist analyzes two samples.One sample contains 14g of element x and 6.0g of element y.The second sample contains 28g of element x and 6.0g of element y. Does it appear that the two samples are the same substance?

The two samples that we are given in the question are different. They are not the same thing because we can deduce that their components ratio are different.

Sample One contains 14g of element x and 6.0g of element y. The ratio of element x to y is 14/6 = 7/3 = 7:3.

Sample Two contains 28g of element x and 6.0g of element y. The ratio of element x to y is 28/6 = 14/3 = 14:3.

Therefore, they have different ratio for their components and are therefore not thesame.

Answer:

Biopolymers are natural polymers produced by the cells of living organisms. Biopolymers consist of monomeric units that are covalently bonded to form larger molecules. There are three main classes of biopolymers, classified according to the monomers used and the structure of the biopolymer formed: polynucleotides, polypeptides, and polysaccharides.

Explanation:

Answer:

2.35 x 10²⁴ atoms Al

Explanation:

Given 3.9 moles of aluminum (Al), determine number of aluminum atoms in that quantity of substance.

By definition a mole is the mass of substance containing one Avogadro's Number (N₀) of particles. That is, 1 mole = 1 N₀ = 6.023 x 10²³ particles*.

So, if 1 mole aluminum contains 6.023 x 10²³ atoms of aluminum then

3.9 moles Al = 3.9 moles Al  x  6.023 x 10²³ atoms Al/mole Al = 2.35 x 10²⁴ atoms Al.

________________

*The complete equivalent relationship is ...

1 mole (atoms or compounds) = 6.023 x 10²³ atoms or molecules = 1 formula weight of the substance = 22.4 Liters (if in gas phase at STP conditions (0°C and 1atm pressure).

________________

Sure hope this is understandable ... if not, kick back a note. Doc

Answer:

[tex]\boxed {\boxed {\sf 4.20 *10^{24} \ atoms \ Al }}[/tex]

Explanation:

To convert from moles to atoms, we must us Avogadro's number: 6.022*10²³. This tells us the number of particles (atoms, molecules, etc.) in 1 mole of a substance. In this case, it is atoms of aluminum.

We can use the number as a fraction.

[tex]\frac{6.022*10^{23} atoms \ Al}{1 \ mol \ Al}[/tex]

Multiply by the given number of moles: 6.98

[tex]6.98 \ mol \ Al *\frac{6.022*10^{23} atoms \ Al}{1 \ mol \ Al}[/tex]

The moles of aluminum will cancel.

[tex]6.98 *\frac{6.022*10^{23} atoms \ Al}{1 }[/tex]

The denominator of 1 can be ignored.

[tex]6.98 * {6.022*10^{23} atoms \ Al}[/tex]

Multiply.

[tex]4.203356*10^{24} \ atoms \ Al[/tex]

The original measurement of moles has 3 significant figures, so our answer must have the same.

For the number we calculated, that is the hundredth place. The 3 in the thousandth place tells us to leave the 0.

[tex]4.20 *10^{24} \ atoms \ Al[/tex]

There are about 4.20*10²⁴ atoms of aluminum in 6.98 moles.

Answer:

The effects of supercritical CO2 (SC-CO2) on the microbiological, sensory (taste, odour, and colour), nutritional (vitamin C content), and physical (cloud, total acidity, pH, and °Brix) qualities of orange juice were studied. The CO2 treatment was performed in a 1 litre capacity double-walled reactor equipped with a magnetic stirring system. Freshly extracted orange juice was treated with supercritical CO2, pasteurised at 90°C, or left untreated. There were no significant differences in the sensory attributes and physical qualities between the CO2 treated juice and freshly extracted juice. The CO2 treated juice retained 88% of its vitamin C, while the pasteurised juice was notably different from the fresh juice and preserved only 57% of its vitamin C content. After 8 weeks of storage at 4°C, there was no microbial growth in the CO2 treated juice.

Answer:

Metals conduct electricity because they have free Electrons in them which helps the current to move eaisily

[tex]7.8 \: mol = \frac{6.02 \times {10}^{23} atoms}{1 \: mol} = 4.6956 \times {10}^{24} \: atoms[/tex]

round as you wish.

Answer:

No because if there was an attraction hydrogen would not do it's function