They burn fossil fuels, which releases huge amounts of sulfur dioxide and nitrogen oxide that pollute the air. ... Two thirds of all sulfur dioxide and more than one third of all nitrogen oxides that pollute the air.
khan academy sucks. can someone answer this? :)
How are cations formed? A. when one or more electrons of an atom disintegrate B. when an atom gains one or more electrons from other atoms C. when an atom shares one or more electrons with another atom D. when an atom loses one or more electrons
Answer:
D
Explanation:
When an atom loses an electron the number of electrons exceeds the number of protons. This means that the negative charge induced by the electrons exceeds the positive charge induced by the protons.
do i have to know the chemical and physical properties of alloys? only chemistry students answer this.
Answer:
yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use
Answer:
alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.
physical properties of alloys:-Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.
chemical properties of alloys:-Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.
dnt learn all thr properties.
these are the main properties..u can learn thse only. hope it will help u
Question 25 points)
Obsidian is a glassy black igneous rock. A sample of obsidian is shown.
Which type of rock forms in a similar manner as obsidian but at a slower
rate?
Oa
Oь
Ос .
Od
schist, which forms under extreme heat and pressure
conglomerate, which forms when different-sized sediments cement together
gypsum, which forms when water evaporates and leaves behind minerals
granite, which forms as magma cools deep underground
Answer:
Granite
Explanation:
Answer:
Granite
Explanation:
Igneous forms when rock is cooled and hardens by Magma.
And the option granite, which forms as magma cools deep underground
Hope it helps have a Good Day
Which of the following describes how covalent
compounds differ from ionic compounds?
A. ionic bonds form between non metals only. B. ionic bonds are more likely to be gas. C. covalent bonds have a lower melting and boiling point. D. covalent bonds are more likely to be solids
Answer: The answer is C
covalent bonds have a lower melting and boiling point
HOPE THIS HELPS !! IF YOU NEED MORE HELP FEEL FREE TO COMMENT IN THE COMMENT SECTION
Where is each conversion factor found?
Answer:
Explanation: A conversion factor is a number used to change one set of units to another, by multiplying or dividing. When a conversion is necessary, the appropriate conversion factor to an equal value must be used. For example, to convert inches to feet, the appropriate conversion value is 12 inches equal 1 foot.
In a reaction 25.00mL of nitric acid required 51.4mL of 0.73M calcium hydroxide. Calculate the grams of nitric acid per liter of solution
Answer:
47.27 g HNO₃
Explanation:
The reaction between nitric acid (HNO₃) and calcium hydroxide (Ca(OH)₂) is the following:
2HNO₃(aq) + Ca(OH)₂(aq) → Ca(NO₃)₂ + 2H₂O(l)
According to the chemical equation, 2 moles of HNO₃ reacts with 1 mol of Ca(OH)₂. At the point of total neutralization, the total number of moles of HNO₃ reacts with the total number of moles of Ca(OH)₂:
2 x moles HNO₃ = moles Ca(OH)₂
The number of moles is equal to the product of molarity of the solution (M) and the volume in liters (V):
M(HNO₃) = ?
M(Ca(OH)₂) = 0.73 M
V(HNO₃) = 25.00 mL x 1 L/1000 mL = 0.025 L
V(Ca(OH)₂) = 51.4 mL x 1 L/1000 mL = 0.0514 L
So, we can write the equation at neutralization point as:
2 x (M(HNO₃) x V(HNO₃)) = M(Ca(OH)₂) x V(Ca(OH)₂)
From this, we can calculate the molarity of HNO₃:
M(HNO₃) = (M(Ca(OH)₂) x V(Ca(OH)₂))/2 x V(HNO₃)
= (0.73 M x 0.0514 L)/(2 x 0.025 L)
= 0.75 M HNO₃
We can convert the molarity from M (mol/L) to g/L by using the molecular weight of HNO₃:
Mw(HNO₃) = 1 g/mol H + 14 g/mol N + (3 x 16 g/mol O) = 63 g/mol
Finally, we multiply the molarity by the molecular weight to obtain the grams of nitric acid per liter of solution:
0.75 mol/L HNO₃ x 63 g/mol = 47.27 g HNO₃
Consider the following reaction occurring in a 1.0 L container:
H2 (g) + I2 (g) → 2 HI (g)
State 2 requirements for a successful collision between H2 and I2.
Answer:
jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw
Calculate the amount of copper obtained by this reaction
The diagram shows the molecular structure of butane. What is the chemical
formula for butane?
Butane
H
Н
Hн
н—с-с-с-с-Н
|| []
Н н н Н
А. 4C1ОН
В. С4Н10
С. 4CH10
D. HC4H
Answer: B
Explanation: sorry if I'm too late but i just did this question and that was the right answer
Balance the following equation: N2 + H2 --> NH3
Write the coefficients that you decide balance the equation like this 3, 4, 3. If you do not add a coefficient in front of an element or compound, use a 1 in your answer. For instance the for this balanced equation: 2H2 + O2 --> 2H2O you would write your answer: 2, 1, 2
Answer:
3, 2
Explanation:
Balanced equation:
N2 + 3 H2 = 2 NH3
El ozono es una sustancia pura cuya molécula está formada por tres átomos de oxígeno, O3. Se encuentra en pequeñas cantidades en la estratosfera formando una ligera capa alrededor de la tierra. El ozono es un filtro para ciertas radiaciones como los rayos ultravioleta que provienen del sol y son muy perjudiciales. Desde hace varias décadas se ha observado una disminución de O3 en el polo sur y comienza a disminuir en el polo norte formando un agujero en esta capa. Qué consecuencias trae para los seres vivos la destrucción de la capa de ozono y cómo podría revertirse este deterioro en dicha capa?
Answer and Explanation:
Dado que la capa de ozono protege la vida en la Tierra actuando como filtro de radiaciones nocivas del Sol, su destrucción trae como consecuencia un aumento de la radiacion UV que puede provocar:
- daños en animales y en el hombre: aumento de casos de cáncer de piel, cataratas en ojos, debilitamiento del sistema inmune.
- alteración en el desarrollo de especies vegetales .
- contribución al efecto invernadero y al calentamiento global.
Para revertir el deterioro de la capa de ozono, podemos tomar algunas medidas:
- no utilizar productos que contengan clorofluorocarbonos (CFC), como por ejemplo algunos aerosoles.
- evitar el uso de productos que contengan halones
- evitar el uso de hidrofluorcarbonos (HFCF)
Estos compuestos químicos reaccionan y destruyen el ozono, por lo que si evitamos utilizarlos, con el tiempo la capa de ozono se recuperará.
Stoichmetric calculations must not be based on the limiting reagent
true or false
Answer:
Ture
Explanation:
Ture
True
True
True
Alia needs to order the following isotopes by atomic number. Use what you know about atomic number and
isotopes to drag and drop the tiles in order of increasing atomic number from lowest to highest.
Silver-109
Cadmium-106
Rhodium-122
Indium-110
Palladium-109
Answer:
Rhodium-122 < Palladium-109 < Silver-109 < Cadmium-106 < Indium-110
Explanation:
Atomic number - Number of protons.
The number displayed at the end of the element in this question represents the mass number (Number of protons + Number of neutrons).
The atomic number of the isotopes are given below;
Silver-109 --> 47
Cadmium-106 --> 48
Rhodium-122 --> 45
Indium-110 --> 49
Palladium-109 --> 46
Arranging in order of increasing atomic number from lowest to highest;
Rhodium-122 < Palladium-109 < Silver-109 < Cadmium-106 < Indium-110
The different between molecules in a liquid and molecules in a gas
Answer:
Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. ... gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
What is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution?
Answer: the answer is 12M
Explanation: 3.0mol/ 0.25L =12M
12M is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution.
What is molarity?The amount of molecules of molecules divided by the quantity of liters in solution is the definition of molarity, a concentration unit in chemistry. It is crucial to comprehend how it is calculated as well as when to employ it in comparison to other units because it is among the most widely used concentration units.
A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per liter of solution. To be clear, this is not the same as the liters of solvents (a common mistake).
molarity = number of moles of solute/ volume of solution in litre
molarity =3.0mol/ 0.25L
=12M
Therefore, 12M is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution.
To know more about molarity, here:
https://brainly.com/question/29884686
#SPJ2
Help me please I’ll give brainliest answer
Answer:
the answer is c I believe
Newtons law of motion
What is the electron configuration of the calcium ion?
Answer: Calcium ion Ca² : 1 s² 2s² 2p ^6 (sorry I don't get 6 similar way as 2) 3s² 3p^6
Also 18 electrons, because Calcium donates two 4s electrons
Explanation:
Select the most reactive metal from the options below
Iron
Copper
Zinc
Gold
Answer: Hello, This is my most favorite class so I know this is right.
The most Reactive metal source is Copper.
Explanation:
This is the most reactive because it contains Lithium supplement.
Your Welcome! Mark me as Brainliest! :)
1. How many liters of a 0.50 M solution are needed to give 3.5 moles of solute?
Answer:
The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution
Explanation:
The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution
Therefore we have;
The concentration of the intended solution = 0.250 M
Therefore, the number of moles per liter of the required resolution = 0.250 moles
Therefore, the concentration of the required solution = 0.250 moles/liter
The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;
The required volume of solution = The number of moles of the solute/(The concentration of the solution)
∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters
The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
how many grams of sulphur contain 3.0×1021 atoms
Answer:
There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
Explanation:
One mole of a substance contains 6.02 × 10²³ particles
One mole of sulphur atom contains 6.02 × 10²³ atoms
Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³
Number of moles of sulphur atom = 0.00498 moles of sulphur atom
The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.
Molar mass of sulphur atom = 32 grams per mole (g/mol)
Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol
Mass of sulphur = 0.16 g
Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.
Which is which, acid or base?
Answer:
HCI - BASE
KOH - ACID
H2SO4 - ACID
H30 + :- BASE
NAOH - ACID
40 g of NaCl is added to 1500 g of water. What is the molality of the resulting
solution?
Molality = moles of solute/mass (in kg) of solvent
The solute here is NaCl, of which you have 40 g or 40/58.4428 = 0.6844 moles NaCl.
The solvent here is water, of which you have 1500 g or 1.500 kg H2O.
The molality of the resulting solution would thus be 0.6844 moles NaCl/1.500 kg H2O = 0.4562 mol/kg.
If you have to consider sig figs, then your final answer would have one sig fig (40 g has one sig fig). In that case, your final answer would be 0.5 mol/kg.
Titanium is a transition metal used in many alloys because it is extremely strong and lightweight. Titanium tetrachloride (TiCl4) is extracted from titanium oxide using chlorine and coke (carbon). TiO2(s) + C(s) + 2 Cl2(g) TiCl4(s) + CO2(g) (a) What mass of Cl2 gas is needed to react with 1.60 mol TiO2? g (b) What mass of C is needed to react with 1.60 mol of TiO2? g (c) What is the mass of all the products formed by reaction with 1.60 mol of TiO2? g
Answer:
a) 226.6 grams of Cl₂
b) 19.2 grams of C
c) 303.2 grams of TiCl₄ and 70.4 grams of CO₂
Explanation:
The balanced chemical reaction is the following:
TiO₂(s) + C(s) + 2 Cl₂(g) → TiCl₄(s) + CO₂(g)
(a) What mass of Cl₂ gas is needed to react with 1.60 mol TiO₂?
From the chemical equation, 1 mol of TiO₂ reacts with 2 moles of Cl₂. So, the stoichiometric ratio is 2 mol Cl₂/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of Cl₂ we need:
1.60 mol TiO₂ x 2 mol Cl₂/1 mol TiO₂ = 3.2 mol Cl₂
Now, we convert from moles to mass by using the molecular weight (MW) of Cl₂:
MW(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol
mass of Cl₂= 3.2 mol x 70.8 g/mol = 226.6 g
Therefore, 226.6 grams of Cl₂ are needed to react with 1.6 mol of TiO₂.
(b) What mass of C is needed to react with 1.60 mol of TiO₂?
From the chemical equation, 1 mol of TiO₂ reacts with 1 moles of C(s). So, the stoichiometric ratio is 1 mol C/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of C(s) we need:
1.60 mol TiO₂ x 1 mol C(s)/1 mol TiO₂ = 1.60 mol C(s)
So, we convert the moles of C(s) to grams as follows:
MW(C) = 12 g/mol
1.60 mol x 12 g/mol = 19.2 g C(s)
Therefore, a mass of 19.2 grams of C is needed to react with 1.60 mol of TiO₂.
(c) What is the mass of all the products formed by reaction with 1.60 mol of TiO₂?
From the chemical equation, we can notice that 1 mol of TiO₂ produces 1 mol of TiCl₄ and 1 mol of CO₂. So, from 1.60 moles of TiO₂, 1 mol of each product will be produced:
1 mol TiO₂/1 mol TiCl₄ ⇒ 1.60 mol TiO₂/1.60 mol TiCl₄
1 mol TiO₂/1 mol CO₂ ⇒ 1.60 mol TiO₂/1.60 mol CO₂
Finally, we convert the moles to grams by using the molecular weight of each compound:
MW(TiCl₄) = 47.9 g/mol Ti + (35.4 g/mol x 4 Cl) = 189.5 g/mol
1.60 mol x 189.5 g/mol = 303.2 g
MW(CO₂) = 12 g/mol C + (16 g/mol x 2 O) = 44 g/mol
1.60 mol x 44 g/mol = 70.4 g
Therefore, from the reaction of 1.60 mol of TiO₂ are formed 303.2 grams of TiCl₄ and 70.4 grams of CO₂.
Dipole-dipole interactions are (weaker than, stronger than, equal to) hydrogen bonds.
Answer and Explanation:
Dipole-Dipole interactions are weaker than hydrogen bonds.
Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.
#teamtrees #PAW (Plant And Water)
There are 5 moles of N20 at STP. What is the density?
Answer:
5 mole of N2O : 112 litre of N2O
5 mole of N2O : 220 g of N2O
Then,
Density = mass/ volume
= 220/112
= 1.96 g per litre
I need help please i need to turn this in today
Answer:
Natural phenomena such as melting glaciers is due to the rise in temperature. This will result to extinction of flora and fauna. Moreover it can cause extreme flooding due to rise in water level in other water bodies such as rivers, lakes
Please help will mark Brainliest!!!
How many grams of HCL (hydrochloric acid) can you make with 50 grams of Cl.
H + Cl -> HCL is the balanced equation
Answer:
Explanation:
It's 21 /
1. Using the structural formulas for ammonia (NH3 on the left) and hexane (C6H14 on the right) below which statement explains what will happen when ammonia and hexane are mixed?
A. Hexane will dissolve with ammonia if you stir them together for 10 minutes
B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.
C. Ammonia and hexane will dissolve together
D. Ammonia and hexane will not dissolve because one molecule is ionic and the other is non polar
2. If you add water to 750.0 mL of a 2.800 M KCl solution, and its molarity changes to 1.500 M, what will the new volume be?
1200 mL
401.0 mL
1400 mL
800.0 mL
Answer:
1. B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.
2. 1400 mL
Explanation:
In chemistry, like dissolve like! Ammonia is a polar molecule having a significant dipole moment owing to its three N-H bonds. On the other hand, hexane is a purely non-polar hydrocarbon hence the two substances can never dissolve in each other.
From the dilution formula;
C1V1=C2V2
C1= Initial concentration of the solution
V1 = Initial volume of the solution
C2 = Final concentration of the solution
V2= Final volume of the solution
2.8 M * 750.0 mL = 1.5 M * V2
V2 = 2.8 M * 750.0 mL/1.5 M
V2 = 1400 mL