Which two forces keep the planets
and moons in their orbits?

Answer:

C)2 mole Cu(NO3)2 / 2 mole Fe

Explanation:

I'm pretty sure.

When iron is combined with copper (1) nitrate, it produces iron (II) nitrate and copper. The following could NOT be a mole ratio in this chemical reaction is:

D) 1 mole Fe(NO₃)₂ / 1 mole Fe

To determine which of the given mole ratios could NOT be part of the chemical reaction between iron and copper(1) nitrate, we need to write the balanced chemical equation for the reaction and then compare it to the given ratios.

The balanced chemical equation for the reaction is:

Fe + Cu(NO₃)₂ → Fe(NO₃)₂ + Cu

A) 1 mole Fe / 2 mole Cu

This mole ratio is consistent with the balanced chemical equation, where 1 mole of Fe reacts with 2 moles of Cu(NO₃)₂ to produce 1 mole of Fe(NO₃)₂ and 1 mole of Cu. So, this ratio could be part of the chemical reaction.

B) 1 mole Fe(NO₃)₂ / 2 mole Cu

This mole ratio is also consistent with the balanced chemical equation, where 1 mole of Fe(NO₃)₂ is produced by reacting 2 moles of Cu(NO₃)₂. So, this ratio could be part of the chemical reaction.

C) 2 mole Cu(NO₃)₂ / 2 mole Fe

This mole ratio is consistent with the balanced chemical equation, where 2 moles of Cu(NO₃)₂ react to produce 2 moles of Fe(NO₃)₂. So, this ratio could be part of the chemical reaction.

D) 1 mole Fe(NO₃)₂ / 1 mole Fe

This mole ratio implies that 1 mole of Fe(NO₃)₂ is produced by reacting with 1 mole of Fe, which is not consistent with the balanced chemical equation. The equation shows that 1 mole of Fe reacts with 1 mole of Cu(NO₃)₂ to produce 1 mole of Fe(NO₃)₂ and 1 mole of Cu. Therefore, this ratio could NOT be part of the chemical reaction.

So, the correct answer is:

D) 1 mole Fe(NO₃)₂ / 1 mole Fe

To know more about iron (II) nitrate here

https://brainly.com/question/31428625

#SPJ2

Answer:

becous thear are two products

Explanation:

The statement is "Because there is only on reactant."

Reactant are raw materials that react with one another and form products.

What is decomposition reaction?

A decomposition reaction can be defined as a chemical reaction in which one reactant breaks into two or more product.

Hence the correct explanation about the reaction is "because there is only one reactant"

To know more about reactant here

https://brainly.com/question/17096236

#SPJ2

Number of particles inside a sugar bowl = 4.4 x 10²³

Given

The molar mass of sugar = 342.3 g/mol

mass of sugar = 250 g

Required

Number of particles

Solution

1 mol = 6.02 x 10²³ particles

mol of sugar :

[tex]\tt mol=\dfrac{mass}{molar~mass}[/tex]

mol = 250 g : 342.3 g/mol = 0.73 mol

Number of particles :

N = n x No

N = 0.73 x 6.02 x 10²³

N = 4.39 x 10²³ ≈ 4.4 x 10²³

AgCl⇒ the precipitate

Given

Reaction

2AgNO₃+CaCl₂⇒2AgCl+Ca(NO₃)₂

Required

The precipitate

Solution

Solubility rules :

soluble compound  :

All compounds of NO₃⁻ and C₂H₃O₂⁻

Compounds of Cl−, Br−, I− except Ag⁺, Hg₂²⁺, Pb²⁺

So AgCl⇒ the precipitate

Ca(NO₃)₂⇒aqueous

Answer:

62.9%

Explanation:

Step 1: Given data

Step 2: Calculate the mass lost of water

We will use the following expression.

mH₂O = mNa₂CO₃.xH₂O - mNa₂CO₃

mH₂O = 71.5 g - 26.5 g = 45.0 g

Step 3: Calculate the percent of water in the hydrate sodium carbonate

We will use the following expression.

%H₂O = mH₂O / mNa₂CO₃.xH₂O × 100%

%H₂O = 45.0 g / 71.5 g × 100%

%H₂O = 62.9%

Answer:

maile pani aii khojeko tmle sideko dekhya ani thicheko ani comment garya haha

The balance chemical equation is 2LiOH + CO2 → Li2CO3 + H2O. Therefore, option A is correct.

A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and the change are both equal.

The law of conservation of mass states that when a chemical reaction takes place, the mass of the reactants and products should be equal. As a result, during the chemical process, the number of atoms in each element remains constant. The chemical equation must be balanced as a result.

The chemical equation is said to be balanced if there are no inequalities. Every element in this illustration now has the same amount of atoms on the reactant and product sides.

Thus, option A is correct.

To learn more about balance chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ2

Answer:

V = 93.0 L

Explanation:

Hello!

In this case, when computing the PVT properties for an ideal gas, we need to use the following equation:

[tex]PV=nRT[/tex]

In such a way, for 2.5 x 10²⁴ molecules of chlorine at STP (273.15 K and 1.00 atm) we first need the moles based on the Avogadro's number:

[tex]n = 2.5x10^{24}molec*\frac{1mol}{6.022x10^{23}molec} = 4.15mol[/tex]

Now, we solve for volume on the ideal gas equation to obtain:

[tex]V=\frac{nRT}{P}[/tex]

So we plug in and get:

[tex]V=\frac{4.15mol**0.08206\frac{atm*L}{mol*K}*273.15K}{1.00atm}\\\\V=93.0L[/tex]

Best regards!

Answer:

the number of neutrons in above isotope = A - Z = 27 - 13 = 14. Note: The molar mass of aluminium, which is average of atomic masses of all isotopes = 26.981538 g/mol, since 13Al27 is the major isotope.

Explanation:

Answer:

Aluminum

Explanation

mass number = number of protons + number of neutrons

Number of protons = mass number - number of neutrons

No of protons = 27-14 = 13

Aluminum contains 13 protons

Answer: The correct name for the compound [tex]C_2I_3[/tex]  is, Dicarbon triiodide.

Explanation:

[tex]C_2I_3[/tex] is a covalent compound because in this compound the sharing of electrons takes place between carbon and iodine.. Both the elements are non-metals. Hence, it will form covalent bond.

The naming of covalent compound is given by:

The less electronegative element is written first.

The more electronegative element is written second. Then a suffix is added with it. The suffix added is '-ide'.

If atoms of an element is greater than 1, then prefixes are added which are 'mono' for 1 atom, 'di' for 2 atoms, 'tri' for 3 atoms and so on.

Hence, the correct name for the compound [tex]C_2I_3[/tex]  is, Dicarbon triiodide..

Answer:

1-Ecologists call this one-way flow of matter and energy from a producer to a primary, then to secondary, and perhaps to a tertiary consumer, a food chain. The food web shows all the organisms at each feeding level or trophic level.

2-Energy flows through an ecosystem in one direction: from producer to primary consumer to secondary consumer to higher consumers. A biomass pyramid provides a picture of the feeding and energy relationships within a food web and the direction of the flow of energy.

Answer:

food

Explanation:

Answer:

[tex]T_{eq}=28.9\°C[/tex]

Explanation:

Hello!

In this case, since it is observed that hot cadmium is placed in cold water, we can infer that the heat released due to the cooling of cadmium is gained by the water and therefore we can write:

[tex]Q_{Cd}+Q_{W}=0[/tex]

Thus, we insert mass, specific heat and temperatures to obtain:

[tex]m_{Cd}C_{Cd}(T_{eq}-T_{Cd})+m_{W}C_{W}(T_{eq}-T_{W})=0[/tex]

In such a way, since the specific heat of cadmium and water are respectively 0.232 and 4.184 J/(g °C), we can solve for the equilibrium temperature (the final one) as shown below:

[tex]T_{eq}=\frac{m_{Cd}C_{Cd}T_{Cd}+m_{W}C_{W}T_{W}}{m_{Cd}C_{Cd}+m_{W}C_{W}}[/tex]

Now, we plug in to obtain:

[tex]T_{eq}=\frac{37.60g*0.232\frac{J}{g\°C}*100.00\°C+25.00g*4.184\frac{J}{g\°C}*23.0\°C}{37.60g*0.232\frac{J}{g\°C}+25.00g*4.184\frac{J}{g\°C}}\\\\T_{eq}=28.9\°C[/tex]

NOTE: since the density of water is 1g/cc, we infer that 25.00 cc equals 25.00 g.

Best regards!

Answer:

3.746 g/mL

Explanation:

Mass of metal =  15.36 g

Initial Volume = 30.0 mL

Final Volume = 34.1 mL

Volume of metal = Final Volume - Initial Volume = 34.1 mL - 30.0 mL

Volume of metal = 4.1 mL

Density = ?

The relationship between the values is given as;

Density = Mass of metal / Volume of metal

Inserting the values;

Density = 15.36 / 4.1  = 3.746 g/mL

The density of the piece of metal is 3.746 g/ml.

Given the mass of metal is 15.36 g

The initial volume of a cylinder is 30.0 ml

The final volume after putting metal in it is 34.1ml

Step 1-  To find the volume:

The volume of metal = Final Volume – Initial Volume 30.0 mL

Volume of metal = 34.1 – 30.0 = 4.1 ml

Volume of metal = 4.1 mL

Step 2- Find the Density:

Density = Mass of metal is divided by the Volume of metal

[tex]\bold{Density = \dfrac{15.36 }{4.1} =3.746 g/ml}[/tex]  

Thus, the density is 3.746 g/ml.

Learn more about density, here:

https://brainly.com/question/952755

Answer:

Reflection

Explanation:

The light from Earth's surface, reflected back towards the Moon, can illuminate it all the same. This is why, when the Moon is in a crescent phase, you can still see features on the dark portion of the Moon: we call this reflected, illuminating light the phenomenon of Earthshine.

Answer:

Answer:

I

Explanation:

d

k

uhm....is there anything you need help with?

Answer:

Vav=d/t

Explanation:

Because the question already gave d=90m and t=20s. Because the car is the thing that can not travel the same distances at the same times.So the equation is V[tex]\\_{av}[/tex]=[tex]\frac{d}{t} \\[/tex]

Answer:

[tex]6K _{(s)} + N _{2(g)} = = > \:2K _{3} N _{(s)} [/tex]

Potassium nitride

Answer:

average velocity for the time interval from t = 2 s to t = 4 s? ... fractional difference in the two methods when a steady wind blows along the car's route and the ... weight, but when the film reaches the drop, the drop's water suddenly ... boat, moving with constant velocity, that is 12 m from the point of impact when the key is.

Explanation:

ABOVE

The average acceleration of the sail boat is 0.083 m/s². Thus option d is correct.

Acceleration is defined as the rate of change of velocity of an object with respect to time.

It is a vector quantity.

Acceleration can also be defined as the velocity change rate over time, in terms of both speed and direction

Average acceleration is defined as the rate of change of velocity of an object for the particular interval of time.

Average acceleration can also be defined as the change in velocity divided by the time elapsed.

It is measured in meter per second.

Average acceleration =  Change in velocity / time

                                    =  5.5 - 3.0 / 30.0

                                    =  0.083 m / s²

Thus, the average acceleration of the sail boat is 0.083 m/s². Thus option d is correct.

To learn more about acceleration, refer to the link below:

https://brainly.com/question/12550364

#SPJ5

Your question is incomplete, but probably your complete question was

A sudden gust of wind increases the velocity of a sailboat relative to the water surface from 3.0m/s to 5.5m/s over a period of 30.0s. Using the formula a=change in velocity /t, what is the average acceleration of the sailboat?

•2.5m/s2

•1.2m/s2

•25m/s2

•0.083m/s2

Answer:

No

Why?

Explanation:

A pure sample of an unknown molecule has a mass of 0.03551 kg and contains 0.2000 moles.

What is the molecular weight of the substance?

Answer:

177.6 g/mol

Explanation:

Trust me

Answer: D an organism

Explanation:

Answer:

Weight is the measure of the force of gravity on an object. The mass of an object will never change, but the weight of an item can change based on its location. For example, you may weigh 100 pounds on Earth, but in outer space you would be weightless.

Explanation:

I can't see the options but I hope this helps!

Answer:

the answer is B.

I hope this helps!

Explanation:

double replacement

Explanation:

it's double replacement

Answer:

D. All living things provides heat and light on Earth.

Explanation:

its the sun that does that

Answer:

option d.

Explanation:

all living things provides heat and light on Earth.

The given question is incomplete. the complete question is : If 5.15 g[tex]Fe(NO_3)_3[/tex] is dissolved in enough water to make exactly 323 ml of solution, what is the molar concentartion of nitrate ion.

Answer:  The molar concentartion of nitrate ion is 0.195.

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per Liter of the solution.

Given : 5.15 g of [tex]Fe(NO_3)_3[/tex] is dissolved

Volume of solution = 323 ml

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n= moles of solute

[tex]Moles=\frac{\text{Given mass}}{\text{Molar mass}}=\frac{5.15g}{242g/mol}=0.021moles[/tex]  

[tex]V_s[/tex] = volume of solution = 323 ml

[tex]Molarity=\frac{0.021\times 1000}{323}=0.065M[/tex]

As 1 M of [tex]Fe(NO_3)_3[/tex] gives 3 M of [tex]NO_3^-[/tex] ions.

Thus 0.065 M of [tex]Fe(NO_3)_3[/tex] gives  = [tex]\frac{3}{1}\times 0.065=0.195M[/tex] of [tex]NO_3^-[/tex] ions.

The molar concentartion of nitrate ion is 0.195.

Answer:

[tex]Mg(s)+2H^+(aq)\rightarrow Mg^{2+}(aq)+H_2(g)[/tex]

Explanation:

Hello!

In this case, since the writing of a net ionic equation first implies writing the complete molecular equation:

[tex]Mg(s)+2HCl(aq) \rightarrow MgCl_2(aq)+H_2(g)[/tex]

We can see that HCl and MgCl2 are ionized because they are aqueous, thus we write:

[tex]Mg(s)+2H^+(aq)+2Cl^-(aq) \rightarrow Mg^{2+}(aq)+2Cl^-(aq)+H_2(g)[/tex]

In such a way, we can cancel out the chloride ions as they are the spectator ones to obtain the net ionic one:

[tex]Mg(s)+2H^+(aq)\rightarrow Mg^{2+}(aq)+H_2(g)[/tex]

Best regards!

Answer:

True

Explanation: