Explanation:
water from rain and snow that travels to streams
Please help!
Water from a rain and snow that travels to streams are examples of run off. These natural processes are part of water cycle and balance the water content in the atmosphere and hydrosphere.
What is water cycle ?Water cycle is a geological phenomenon to balance the water content in the atmosphere, hydrosphere and in the biosphere. The water bodies evaporate by the heat radiated by sun.
The air moisture can be restored to the land through the cooling of the vapor and pour as rain. This best illustrates the interaction between atmosphere and hydrosphere.
Rain, snow, sleet, or hail that reaches a surface stream without ever going below the soil's surface is referred to as surface runoff. It differs from direct runoff, which is runoff that directly reaches surface streams following rainfall or snowmelt. Hence option 4 is correct.
Find more on water cycle :
brainly.com/question/1151425
#SPJ6
If the point of the nail can be approximated as a circle with a radius 2.00×10^-3m What is the pressure in MPa exerted on the wall if a hammer strikes the nail with a force of 104 N
Answer:
8.28 MPa
Explanation:
From the question given above, the following data were obtained:
Radius (r) = 2×10¯³ m
Force applied (F) = 104 N
Pressure (P) =?
Next, we shall determine the area of the nail (i.e circle). This can be obtained as follow:
Radius (r) = 2×10¯³ m
Area (A) of circle =?
Pi (π) = 3.14
A = πr²
A = 3.14 × (2×10¯³)²
A = 3.14 × 4×10¯⁶
A = 1.256×10¯⁵ m²
Next, we shall determine the pressure. This can be obtained as follow:
Force applied (F) = 104 N
Area (A) = 1.256×10¯⁵ m²
Pressure (P) =?
P = F / A
P = 104 / 1.256×10¯⁵
P = 8280254.78 Nm¯²
Finally, we shall convert 8280254.78 Nm¯² to MPa. This can be obtained as follow:
1 Nm¯² = 1×10¯⁶ MPa
Therefore,
8280254.78 Nm¯² = 8280254.78 Nm¯² × 1×10¯⁶ MPa / 1 Nm¯²
8280254.78 Nm¯² = 8.28 MPa
Thus, the pressure exerted on the wall is 8.28 MPa
If sperm and egg cells have half of the number of chromosomes found in other body cells, how do gametes form?
Why is 1/t used as a measure of rate of reaction?
1/t denotes that the reaction order is of the first order. That is, the rate of reaction is directly proportional to the concentration of the reactant. Because scientists use standard units, 1/t equals one divided by one second.
What do you mean by first order reaction ?The term first order reaction is defined as a chemical reaction in which the reaction rate is linearly dependent on the concentration of only one reactant.
In other words, a first-order reaction is a chemical reaction in which the rate varies as the concentration of only one of the reactants changes.
Because a reaction that takes longer to complete is obviously a slower reaction. A fast reaction is one that takes less time to complete. 1/t simply provides a quantitative value for comparing reaction rates.
Thus, 1/t denotes that the reaction order is of the first order.
To learn more about the first order reaction, follow the link;
https://brainly.com/question/12209424
#SPJ2
What properties do atoms of the same element share? Select all that apply
atomic number
chemical reactivity
melting point
Answer: your answer is A
Explanation: the atoms has the same properties of the same element as the atomic number.
What is (1.20 x 104 m) x (3.070 x 102m)
Each cell in an organism contains a set of hereditary information that gets passed from one generation to the next. The genes in all organisms contain instructions needed to make offspring. Which statement describes
heredity in animals?
A Offspring show recessive traits only.
B Offspring receive genetic traits from a single parent only.
C Offspring receive genes with traits that are always physically observable.
D Offspring receive genes from each parent, which contribute to the traits in the offspring.
please help
Answer:
D
Explanation:
Offspring receive genes from both parents, they don't always have a recessive or dominant train but if they do have a dominant trait, it will always show while the recessive will only show if there is no dominant trait. For example: DD, Dr, and rr (D= dominant r = recessive)
Answer:D
Explanation:
i did this one too and it’s right
constrast a mixture and a compound , how are. they different?
Answer:
A mixture is composed of two or more elements or compounds in a non-fixed ratio, which means you can vary the amount of substance in a mixture. A compound is composed of two or more elements in a fixed ratio, so you cannot vary the amount of each element in a compound
Answer:
mixture retains property of combing substances while compound has new properties that are different from combing elements...
can be separated by physical means whereas compounds can be separated by chemical or electrochemical methods
How many grams of H,O are needed to produce 13 g of NaOH? 2 Na,O2 + 2 H20-4 NaOH + O2
Answer:
This is a typical stoichiometry question.To answer this question you want to get a relationship between
N
a
2
O and NaOH.
So you can get a relationship between the moles of
N
a
2
O
and moles of NaOH by the concept of stoichiometry.
N
a
2
O +
H
2
O ----------------> 2 NaOH.
According to above balanced equation we can have the stoichiometry relationship between
N
a
2
O and NaOH. as 1:2
It means 1 moles of
N
a
2
O is required to react with one mol of
H
2
O to produce 2 moles of NaOH.
in terms of mass 1 mole of
N
a
2
O has mass 62 g on reaction with water produces 2 moles of NaOH or 80 g of NaOH.
62 g of
N
a
2
O produces 80 g of NaOH.
1g of NaOH is produced from 62/80 g of
N
a
2
O
1.6 x
10
2
g of NaOH will require 62 x 1.6 x
10
2
g / 80 of
N
a
2
O
124g of
N
a
2
O.
Explanation:
which statement best explains why chlorine is added to drinking water? A. Chlorine cures infections caused by bacteria or other microorganisms B. Chlorine protects people teeth against cavities C. Chlorine prepares the body to fight future infections D. Chlorine kills most pathogens in water
Answer:
to protect peoples teeth against cavities
Explanation:
i just know
Answer: its D
Explanation: A.P.E.X.
Explain why it is often necessary to start a campfire with many pieces of kindling (small pieces of wood) rather than with a few large logs
Answer:
It is often necessary to start campfire with many pieces of kindling rather than large logs because it is easier to ignite smaller pieces than larger pieces. Imagine wanting to light up a pile of clothes and a small piece of a shirt. Which ignites faster? The piece of a shirt, because it is smaller and more likely to burn very quickly. Additionally, people criss-cross these tiny pieces of wood to enable more surface area and to allow more oxygen to pass through. As you know, oxygen is necessary for a flame to ignite.
Clear selection
1 point
5. Choose the correct pair to
complete the given statement.
The size of the pupil _ (i) _ in
bright light to allow _ (ii) _ light
to enter our eyes.
O A. (i) increases and (ii) more
B. (i) decreases and (ii) more
O C. (i) increases and (ii) less
O D. (i) decreases and (ii) less
6. Which labelled part gives the 1 poi
human eye, its characteristic
colour
?
Answer:
I believe it is d! Reason being, when you cover your eyes with your hands for a period if time, and then move your hands, your pupils become wide, this means that when there is light your pupils are most like decreasing in size and allowing less light! :) hope this helps
Describe the modern system of classification. Help please!
Answer:
its called TAXON0MY
Explanation:
they are classified in eight steps namely doma!n, k!ngdom, phylum, class, order, family, genus, and spec!es
but sometimes we do not include doma!n
if you want to name an organism you use both the genus group and the spec!es group
Example:
The scientific name for humans like us is h0m0 sap!ens
H0m0- This is our genus group
sap!ens- This is our spec!es group
sorry for using the exclamation mark it means i
Answer:
The modern system of classification is a hierarchy with eight levels. These levels are domain, kingdom, phylum, class, order, family, genus, and species. There are three domains and six kingdoms in the modern system.
Explanation:
Question pic
(Will make brainliest)
Answer:
c
Explanation:
Answer:
a and c
Explanation:
what creates an electric current in a battery?
A. Atoms dissolving
B. Metals generating
C. Electrons jumping
D. Liquids moving
Answer:
There's a separate chemical reaction happening at the positive electrode, where incoming electrons recombine with ions taken out of the electrolyte, so completing the circuit. The electrons and ions flow because of the chemical reactions happening inside the battery—usually two of them going on simultaneously.
Explanation:
option (B) is right
Metals used in batteries undergo a chemical reaction with the electrolyte and free the electrons. The flow of electrons produces the electric current.
What is the electrical battery?An electric battery can be described as a source of electric power containing of one or more electrochemical cells with external connections.
The positive terminal of the battery is the cathode and its negative terminal is the anode. The negative terminal can be denoted as the source of electrons that will flow via an external electric circuit to the positive terminal.
A redox reaction transforms high-energy reactants into lower-energy products, and the free-energy difference provides the external circuit as electrical energy.
Each cell of the battery contains two half-cells connected in series by an electrolyte containing metal cations. One half-cell includes an electrolyte and the negative electrode and the other half-cell includes an electrolyte and the positive electrode. Cations are reduced at the cathode, while metal atoms are oxidized at the anode.
Learn more about electrical battery, here:
https://brainly.com/question/8745955
#SPJ2
list 10 uses of composite
Aerospace
Thermoset composites are being specified for wings, fuselages, bulkheads, and other applications in commercial, civilian and military aerospace applications.
Appliance/Business
Thermoset composite are being used in frames, equipment panels, handles and trims in appliances, power tools, business equipment and many other applications.
Thermoset composites for the appliance industry are used in washers, dryers, refrigerators, freezers, ranges, ovens, dishwashers for components that include control panels, handles, knobs, vent trims, side trims, motor housings, kick plates and many others.
Automotive/Transportation/Farm/Construction
Composites are now being used in vehicle and equipment applications, including, panels, frames, interior components and other parts.
Civil Infrastructure
Some composite infrastructure applications include buildings, roads, bridges and pilings.
Construction
Thermoset composites are replacing many traditional materials for home and offices architectural components including fixtures, doors, wall panels, roofing, window frames, moulding, vanity sinks, shower stalls and even swimming pools.
Corrosive Environments
Composites are ideal for applications in corrosive environments, such as chemical processing plants, pulp and paper converting, oil and gas refineries and water treatment facilities. Common applications include fans, grating, tanks, ducts, hoods, pumps and cabinets.
Electrical
With strong dielectric properties including arc and track resistance, Thermoset components include substation equipment, microwave antennas, standoffs and pole line hardware and printed wiring boards. Applications and components include switchgear, motor controls, standoff insulators, control system components, circuit breakers, arc chutes, arc shields, terminal blocks, terminal boards, metering devices, bus supports and lighting components.
Marine
With their corrosion resistance and light-weighting attributes, Marine composite applications include boat hulls, bulkheads and other components for military, commercial and recreational boats and ships.
what is the answer to this
Answer:
Explanation:
i may be wrong but i think its b
Answer:
B Ndaira is right for real
Explain why the metals conduct electricity
write in your own words please, don't copy-paste from internet
Answer:
Metals conduct electricity because the electrons inside the metal are relatively free to move. So when electricity is pass through metals, electrons carry electricity and spread it all over the metal. The mobility of electrons is the reason why metals conduct electricity.
Which of the following is not an organ in the nervous system?
Please help it’s already overdue
Answer:
no se amigo esquema no entiendo ingles
i really need help with this
Answer:
the process shown here is endocytosis.
Explanation:
endocytosis is a process of taking something inside the cell..
How many grams are in 21.4 mol Cl2 gas?
Cl2 = 70.9 g/mol
=
[tex]21.4 \: mol \times \frac{70.9 \: g}{1 \: mol} = 1517.26 \: g[/tex]
A chemical reaction that is expected to form 325.0 gof product only forms 123.8 g of product. What is the percent yield of this reaction?
38.1%
61.9%
201.2%
262.5%
Answer:
[tex]\boxed {\boxed {\sf A. \ 38.1 \%}}[/tex]
Explanation:
Percent yield is the ratio of the amount actually produced to how much could theoretically be produced. It is found using this formula:
[tex]\% \ yield = \frac{actual \ yield}{theoretical \ yield} *100[/tex]
For this reaction, the theoretical or expected yield is 325.0 grams. The actual yield is 123.8 grams.
[tex]\% \ yield = \frac{ 123.8 \ g }{325.0 \ g }*100[/tex]
Divide.
[tex]\% \ yield = 0.380923077 *100[/tex]
[tex]\% \ yield = 38.0923077[/tex]
Round to the nearest hundredth. The 9 in the hundredth place tells us to round the 0 to a 1 .
[tex]\% \ yield \approx 38.1[/tex]
The percent yield is about 38.1%
Answer:
38.1%
Explanation:
If the available number of valence electrons for a molecule or polyatomic ion does not complete all of the octets in a lewis structure what should you do
Answer:
If the available number of valence electrons for a molecule or ion does not complete all of the octets, then multiple bonds must be drawn.
Explanation:
If the available number of valence electrons for a molecule or ion does not complete all of the octets, then multiple bonds must be drawn.
We must note that Lewis structures are representations of molecules Using dots to show the number of valence electrons on the valence shell of the atoms of each of the constituent elements in the molecule. Each atom is expected to have an octet of electrons on its outermost shell.
Many times, we encounter Lewis structures in which the octet of some atoms are incomplete. This means that the atoms have less than eight outermost electrons.
In such cases, we must invoke the idea of multiple bonds to account for the incomplete octet.
Learn more: https://brainly.com/question/4144781
2 NaOH + H2SO4 ------> 2 H2O + Na2SO4
How many moles of H2O can be produced from 12.5 moles of NaOH?
Explanation:
2moles of NaOH -> 2moles of H2O
so the number of moles r equal.
hence moles of H2O is 12.5
A gas at 127 celsius and 10.0 L expands to 20.0 L. What is the new
temperature in kelvin? (You must convert to Kelvin before calculating
this problem
Answer:
800.3 Kelvin
Explanation:
127°C = 400.15 Kelvin (because 127 + 273.15)
Charles Law:
[tex]\frac{V1}{T1} = \frac{V2}{T2}[/tex] Thus, [tex]\frac{10.0 L}{400.15 K} = \frac{20.0 L}{T2}[/tex]
Then, work out the math algebraically.
T2 = 20.0 / (10.0/400.15)
= 20.0 / 0.02499...
= 800.3 Kelvin
This is assuming the pressure remains constant.
Convert 6.24 x 10g to standard notation.
Answer:
3.45 x 10^5
Explanation:
Our current model of a chemical bond is to think of it as an electrical interaction between what two parts of an atom
Answer:
Explanation:
It involves the thinking of it as an electrical interaction between the positively charged part of an atom and the negatively charged part as well. Succinctly put, the interaction between the proton of an atom and the electron of an atom.
The relationship between these two sub atomic particles is one of the basis for many chemical bonding, and this is inclusive of all the bonds there exist. Hydrogen, Electrovalent and even Covalent bondings to mention but a few
please help me! (brainliest)
Answer:
It is A
Explanation:
HELP ASAP!!!!!! 30 PTS
Mouth, throat, kidney, and stomach cancers can each be linked to a common cause.
Which can be a cause of any of these cancers?
UV radiation
tobacco use
diabetes
sickle cell anemia
Answer:
Tobacco use
Explanation:
Smoking causes cancer, heart disease, stroke, lung diseases, diabetes, and chronic obstructive pulmonary disease (COPD), which includes emphysema and chronic bronchitis. Smoking also increases risk for tuberculosis, certain eye diseases, and problems of the immune system, including rheumatoid arthritis
Answer:
c. Tabaco use
Explanation:
¿Qué es la ciencia? ¿Qué importancia tiene la ciencia para el desarrollo de la humanidad y de la vida? AYUDA PORFAAAAAAAA
Explanation:
La ciencia puede entenderse como una forma que el ser humano encontró para adquirir conocimientos a través de métodos científicos, tecnológicos y basados en estudios, pruebas e investigaciones y no basados en el pensamiento para explicar los fenómenos humanos, de la naturaleza y de la vida.
La ciencia tiene un rol impactante y transformador en la sociedad, todo el conocimiento adquirido por el hombre a través de la ciencia ha transformado para mejor la vida de las personas, generando mayor calidad de vida, salud, educación, sentido crítico, etc.
En el escenario pandémico que vive el mundo actualmente, la ciencia es fundamental, a través de sus estudios e investigaciones que han ayudado en el desarrollo de vacunas efectivas para inmunizar a los humanos contra el virus y salvar vidas.