Answer: A pair of elements will most likely form an ionic bond if one is a metal and one is a nonmetal. These types of ionic compounds are composed of monatomic cations and anions
Explanation:
lobal wind patterns have less to do with air temperature than local winds. A True B False
Answer:
False
Explanation:
Depends mostly on heating of the earths surface being uneven
It is false that global wind patterns have less to do with air temperature than local winds.
What is global wind?Local winds are those that blow over a small area. Local geography, such as proximity to an ocean, has an impact on them.
Monsoons and land and sea breezes are among them. Global winds occur in belts all over the world.
Temperature differences, particularly the difference in heating at the equator and poles, and the Earth's rotation determine the global atmospheric circulation pattern.
By transporting heat and water, winds shape regional climate and influence daily weather.
Global winds are winds that occur in belts that circle the globe. Global winds, like local winds, are caused by uneven heating of the atmosphere.
Because of the Coriolis effect, winds blow diagonally across the surface.
Thus, the given statement is false.
For more details regarding global wind, visit:
https://brainly.com/question/8957184
#SPJ2
If I bought a pen, would this be an irreversible change? Explain why
Answer:
No
Explanation:
it will not be a irreversible change because u can give back the pen if it is in its original state and the shop keeper might accept it back that is what mostly happens. if the pen breaks or is used then it might me called a irreversible change until then it is reversible if not used yet.
thank u
Answer:
No
this is reversible because you can return the pen.
How would you make up 75 ml of a 45 mg/ml BSA solution?
Answer: see below
Explanation: for 75 ml, take 45*75 mg of BSA and make up to 75 mL with distilled water.
4.) What is atomic number.
Answer: the number of protons in the nucleus of an atom, which determines the chemical properties of an element and its place in the periodic table.
Explanation:
A 18.5 gram sample of metal was added to a graduated cylinder that had
an initial volume of 45.50 mL. The water level raised to 54.10 mL. Using
this information, calculate the density of the metal. *
Answer:
[tex]d=2.15g/mL[/tex]
Explanation:
Hello there!
In this case, since the density of the metal is computed as shown below:
[tex]d=\frac{m}{V}[/tex]
We need to calculate the volume of the solid by subtracting the final volume and the initial volume of water:
[tex]V=54.10mL-45.50mL\\\\V=8.60mL[/tex]
Thus, we obtain:
[tex]d=\frac{18.5g}{8.60mL}\\\\d=2.15g/mL[/tex]
Best regards!
Most of Earth's major earthquakes are caused by
x
seasonal heating and cooling of Earth's surface
B
x
weathering of rock at Earth's surface
C
x
earth's gravitational attraction to the Moon
D
x
faulting of rock in earth's crust
Answer:
d
When the stress on the edge overcomes the friction, there is an earthquake that releases energy in waves that travel through the earth's crust and cause the shaking that we feel.
An ore sample is found to contain 10.500000 g of cobalt and 87.3 g waste rock (gangue). What is the
percent by mass of cobalt in the ore?
Answer:
[tex]\% Co=10.7\%[/tex]
Explanation:
Hello!
In this case, since this is a mixture composed by cobalt and waste rock, we can compute the percent by mass of cobalt as shown below:
[tex]\% Co=\frac{m_{Co}}{m_{Co}+m_{waste}} *100\%\\\\[/tex]
Thus, we plug in to obtain:
[tex]\% Co=\frac{10.500000g}{10.500000g+87.3} *100\%\\\\\% Co=10.7\%[/tex]
Best regards!
If 0.332 mol of zinc reacts with excess lead(IV) sulfate, how many grams of zinc sulfate will be produced in the reaction?
Answer:
53.6 g
Explanation:
Step 1: Write the balanced equation
2 Zn + Pb(SO₄)₂ ⇒ 2 ZnSO₄ + Pb
Step 2: Calculate the moles of ZnSO₄ produced from 0.332 moles of Zn
The molar ratio of Zn to ZnSO₄ is 2:2. The moles of ZnSO₄ produced are 2/2 × 0.0332 mol = 0.0332 mol.
Step 3: Calculate the mass corresponding to 0.332 moles of ZnSO₄
The molar mass of ZnSO₄ is 161.44 g/mol.
0.332 mol × 161.44 g/mol = 53.6 g
If false rewrite the statements to make them correct True or False.
1. Only particles in the solid state are in motion.
2. The particles of a solid have more energy than those of a gas.
3. In a glass of iced tea, tea is the solute.
All of the following have an OCTET of electrons except
о
S-1
O
N-3
O
Be+2
O
Br-1
Answer:
full octets live in noble gas world so you need to be whatever your charge is away from there in steps on the periodic table so s-1 is the one that falls short as it is 2 moves away from Ar which is its closest Noble gas
Explanation:
In this case you have unlimited iron, but only 6.40 moles of oxygen (O2). How much Fe2O3 can you produce?
Answer: 682 grams
Explanation:
The balanced chemical reaction is:
[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]
[tex]O_2[/tex] is the limiting reagent as it limits the formation of product and [tex]Fe[/tex] is the excess reagent.
According to stoichiometry :
3 moles of [tex]O_2[/tex] produce = 2 moles of [tex]Fe_2O_3[/tex]
Thus 6.40 moles of [tex]O_2[/tex] will produce=[tex]\frac{2}{3}\times 6.40=4.27moles[/tex] of [tex]Fe_2O_3[/tex]
Mass of [tex]Fe_2O_3=moles\times {\text {Molar mass}}=4.27moles\times 159.69g/mol=682g[/tex]
Thus 682 g of [tex]Fe_2O_3[/tex] will be produced from 6.40 moles of oxygen
Which two formulas are used to calculate potential and kinetic energy?
Answer:
[tex]\boxed{\bold { \large { \boxed {KE=\frac{1}{2} mv^2 \ , \ PE=mgh}}}}[/tex]
Explanation:
Kinetic energy formula
[tex]\displaystyle KE=\frac{1}{2} mv^2[/tex]
Potential energy formula
[tex]\displaystyle PE=mgh[/tex]
[tex]\displaystyle KE \Rightarrow \sf kinetic \ energy \ (J)[/tex]
[tex]\displaystyle PE \Rightarrow \sf potential \ energy \ (J)[/tex]
[tex]\displaystyle m \Rightarrow \sf mass \ (kg)[/tex]
[tex]\displaystyle v \Rightarrow \sf velocity \ (m/s)[/tex]
[tex]\displaystyle g \Rightarrow \sf acceleration \ of \ gravity\ (m/s^2)[/tex]
[tex]\displaystyle h \Rightarrow \sf height \ (m)[/tex]
The representative particle for NaF
Answer:
Na2S, it is the formula unit
Explanation:
The representative particle of CO2 is the molecule, while for Na2S, it is the formula unit
A hot air ballon will rise in air because:
Answer: C
Explanation:
Hot air is a lot less dense for a few reasons. Hot air essentially means the particles have more kinetic energy, and move around a lot more. Cold air is dense because the particles move a lot less, have less energy, and are closer together.
Answer:
A
Explanation:
Since the balloon itself is heavier than air, it must be filled with a large volume of something much lighter—either hot air or a very light gas, such as helium. Because the combined weight of the balloon and the gas is less than the weight of an equal volume of surrounding air, the balloon rises.
If 0.813 g of O3 reacts with 0.605 g of NO, how many grams of NO2 will be produced?
Answer:
0.74 g O
3
=
48
0.74
=0.0154 mol O
3
0.67 g NO=
30
0.67
=0.0223 mol NO
O
3
is the limiting reagent and NO is in excess =0.0223−0.0154=0.007 mol
Thus, O
3
taken =NO
2
formed =0.0154 mol NO
2
=0.0154×46 g NO
2
Explanation:
please help I really need this
Answer:
You eat a hamburger and breathe in oxygen.
Oxygen goes immediately from your lungs to blood vessels to cells.
Food molecules in the hamburger are broken down into glucose in the digestive system.
Explanation:
If 5.025 grams of NaOH are dissolved in 2.4 liters of water, what is the Molarity of the solution?
Answer:
0.052 M.
Explanation:
Hello!
In this case, since the molarity is computed by dividing the moles of the solute by the volume of the solution in liters (M=n/V), we first need to compute the moles in 5.025 grams of NaOH as shown below:
[tex]n=5.025g*\frac{1mol}{40.0g}\\\\n=0.126mol[/tex]
In such a way, we compute the molarity as show below:
[tex]M=\frac{0.126mol}{2.4L}\\\\M=0.052M[/tex]
Best regards!
how does a decrease in potential energy during a chemical rwaction relate to the temperature of the surroundings
Answer: If the potential energy of the reaction system decreases, then kinetic energy in the surroundings increases and the temperature of the surroundings rises
Explanation:
The decrease in the potential energy results in an increase in the temperature of the system and surroundings.
Mechanical energy has been described as the sum of the kinetic and the potential energy in the system. With the increase in the potential energy, there has been a decrease in the kinetic energy and vice versa.
The decrease in the potential energy results in an increase in the kinetic energy of the system. The kinetic energy has been termed as the energy of performing work. The rise in the kinetic energy results in an increase in the work done in the system and there has been an increase in the temperature of the system.
Thus, the decrease in the potential energy results in an increase in the temperature of the system and surroundings.
For more information about the potential energy, refer to the link:
https://brainly.com/question/21288807
This is IXL pls hurry pls! SOS major
Answer:
the same as
Explanation:
that's what makes the most since to me but i may be wrong
When the following molecular equation is balanced using the smallest possible integer coefficients, the values of these coefficients are: sodium chloride (aq) silver nitrate (aq) silver chloride (s) sodium nitrate (aq)
Answer:
1 on each compound there
Explanation:
A balanced reaction is a reaction that has the same number of atoms in the reactants and products. If this number is not the same, we need to balance it putting some numbers as coefficients behind the compound or element that needs to be balanced, For example:
NH₃ ------> N₂ + H₂
As you can see in this reaction, we have 1 nitrogen and 3 hydrogens in the reactants, and in the side of products we have 2 of each element. This needs to be balanced. To do this we put a number as coeffcient to balance the atoms. In this case, we can put a number 2 behind the NH₃, so the number of atoms of nitrogen becomes 2:
2NH₃ ------> N₂ + H₂
But this 2, changes the number of hydrogens, we now have 6 (cause 2 * 3 = 6), so, let's balance hydrogen on the products to be 6, putting a 3:
2NH₃ ------> N₂ + 3H₂
Now, the reaction is balanced in each side of the reaction.
Applying the same principle to the reaction of this exercise we have the following:
NaCl(aq) + AgNO₃(aq) ---------> AgCl(s) + NaNO₃(aq)
As you can see, we have the same number of atoms on each side:
Na: 1; Cl: 1; Ag: 1; N: 1; O: 3
So we don't need to balance this reaction, with just putting the number 1 or none, is perfectly balanced.
Hope this helps
(CH3CH2)2CHCH(CH3)2 Check all that apply. Check all that apply. alkane alkene alkyne cycloalkane cycloalkene cycloalkyne aromatic hydrocarbon
Answer:
Alkane
Explanation:
Alkane is a class of organic compounds that contain only carbon and hydrogen and the carbon atoms are connected to each other by single bonds.
Now, if we look at the molecule whose condensed structural formula is shown in the question, we will notice that the compound can only contain single bonds. That is, the molecule is a saturated hydrocarbon(alkane).
I have drawn out the full structure of the compound to illustrate this point.
can someone tell me the answer and how to do the problem?
Answer:
is tht wht u want
Explanation:
1 grams Sodium is equal to 0.043497607849056 mole.
Which of the following was a major goal of the National Association for the Advancement of Colored People when it
was formed in 1909?
to end integration
to end segregation
to support black nationalism.
O to support the accommodationist approach
When’s end
Answer:
to end segregation
Explanation:
National Association for the Advancement of Colored People (NAACP), interracial American organization created to work for the abolition of segregation and discrimination in housing, education, employment, voting, and transportation; to oppose racism; and to ensure African Americans their constitutional rights.
To end segregation was a major goal of the National Association for the Advancement of Colored People when it was formed in 1909. Therefore, the correct option is option B.
What is NAACP?
A group of individuals led by W. E. B. Du Bois, Mary's White Ovington, Moorfield Storey, and Ida B. Wells founded the National Association over the Advancement of Coloured People (NAACP) in 1909 as an interracial effort to advance fairness for African Americans. Roy Wilkins and Thurgood Marshall were among the group's leaders.
"To ensure the equal treatment in politics, schools, society, and the economy of the liberties of all persons as to eliminate ethnicity-based discrimination" is its stated objective for the twenty-first century. Political lobbying, public relations campaigns, and legal team-developed lawsuit strategies are just a few of the national NAACP initiatives. To end segregation was a major goal of the National Association for the Advancement of Colored People when it was formed in 1909.
Therefore, the correct option is option B.
To know more about NAACP, here:
https://brainly.com/question/30517849
#SPJ7
Kito puts his spoon into a helping of fresh, hot, mashed potatoes as shown in the figure. Which process takes place when the two objects come together
A. The temperature of the spoon increases, but its thermal energy does not change
B. Energy in the form of heat is transferred from the warmer mashed potatoes to the cooler spoon
C. The thermal energy of both the mashed potatoes and the spoon increases as energy in the form of heat is transferred between them
(please answer quickly, I don't want to fail this test due to being stuck on this one)
Answer:
B. is the answer
Explanation:
Energy in form of heat is transferred from the warmer mashed potatoes to the cooler spoon.
Radioactive decay follows first-order kinetics. If a sample of I-131 decays from 25.0 mg to 8.25 mg in 12.8 days, what is the rate constant, k?
Answer:
k = 0.0866 days⁻¹
Explanation:
The isotope decay of the atom follows the equation:
ln [A] = -kt + Ln[A]₀
Where [A] is the amount of the isotope after time t = 8.25mg
Time = 12.8days
k is rate constant
[A]₀ is actual amount of the isotope = 25.0mg
Replacing:
ln 8.25mg = -k*12.8days + ln 25.0mg
2.11 - 3.22 = -k*12.8days
-1.11 = -k12.8days
k = 0.0866 days⁻¹
Solder is a silver metal used to hold pipes together. When the solder is heated, it melts and acts as a type of metal "glue." Mrs. Hanley heats a piece of solder until it melts between two pipes. What best identifies the point at which a physical change first takes place?
A)when the solder melts
B)when the solder cools down
C)when the solder is a soft metal
D)when the solder becomes solid again
Answer:
A
Explanation:
I need 11 12. 13. 14. 15. And 16 please and thank you ❤
Answer:
11.) Radio
12.) Microwave
13.) Infrared
14.) Ultraviolet
15.) X-Ray
16.) Gamma Ray
Radio waves have the longest wavelength, and gamma rays have the shortest wavelength.
How many grams of propane, C3H8, are needed to make 140 grams of water?
Answer:
85.6 g
Explanation:
Step 1: Write the balanced combustion equation
C₃H₈ + 5 O₂ ⇒ 3 CO₂ + 4 H₂O
Step 2: Calculate the moles corresponding to 140 g of H₂O
The molar mass of H₂O is 18.02 g/mol.
140 g × 1 mol/18.02 g = 7.77 mol
Step 3: Calculate the moles of C₃H₈ needed to produce 7.77 moles of H₂O
The molar ratio of C₃H₈ to H₂O is 1:4. The moles of C₃H₈ needed are 1/4 × 7.77 mol = 1.94 mol.
Step 4: Calculate the mass corresponding to 1.94 moles of C₃H₈
The molar mass of C₃H₈ is 44.10 g/mol.
1.94 mol × 44.10 g/mol = 85.6 g
Which kingdom contains both unicellular and multicellular eukaryotic organisms?
Animalia
Fungi
Plantae
Bacteria
what is is pls
Writing Prompt/Open-Ended Question
What are limiting reactants? How can you predict how much of a product you will create if you know how much of a reactant you used?
Answer:
If you are given a chemical equation and specific amounts for each reactant in grams, you have to follow these steps, in order, to determine how much product can possilby be made:
1. Convert each reactant into moles of the product.
2. Determine which reactant is the limiting reactant.
3. Convert the moles of product, from the limiting reactant, to grams.
Explanation: