Which of the following is a true statement about the Earths tectonic plates?

Answer:

Answer:

                   Potassium Nitride is composed of the greatest number of atoms.

Explanation:

find the number of atoms present in each compound we will write down their molecular formulas and then we will add up the number of atoms present in them.

A: Dinitrogen Monoxide:

                                       Chemical formula of Dinitrogen Monoxide is N₂O. Therefore, it contains two atoms of Nitrogen and one atom of oxygen Hence, in total it contains 3 atoms.

B: Sodium Chloride:

                               Chemical formula of Sodium Chloride is NaCl. Therefore, it contains one atom of Sodium and one atom of Chlorine Hence, in total it contains 2 atoms.

C: Potassium Nitride:

                                       Chemical formula of Dinitrogen Monoxide is K₃N. Therefore, it contains three atoms of Potassium and one atom of Nitrogen Hence, in total it contains 4 atoms.

D: Carbon Dioxide:

                               Chemical formula of Carbon Dioxide is CO₂. Therefore, it contains one atom of Carbon and two atoms of Oxygen Hence, in total it contains 3 atoms.

Explanation:

Answer:

It is electrical → heat, sound, and motion

because a hair dryer makes heat to dry your hair and sound is the blowing and motion is how it goes

Explanation:

Answer:

A

Explanation:

electrical -- heat sound, and motion

Answer:

50 CM burette

Explanation:

bvffvvhjf

Answer:

i think its Yes. The bubbles contain hydrogen and oxygen that separated from the water but i could be wrong so i would just wait to see if anybody else says anything

Explanation:

Answer: D)

• Take out the ice and stir it up outside where it is warmer.

Explanation:

Answer:

thank you! I made it to an 100% on USA test prep...

the answer is: Take out the ice and stir it up outside where it is warmer.

Explanation:

I have a lot of rain last night when I go to bed. Stay safe!

An alloy always has two or more elements/metals in it. An alloy always has at least metal in it.

Steels have iron and carbon in it. Bronze is copper and tin, or aluminum, or manganese, or zinc. German silver isn't silver at all and contains copper, zinc, and nickel.

Hope this helps!

Answer:

(i) Change in colour (ii) Change in temperature  (iii) Formation of precipitate

Explanation:

(i) Change in colour: Reaction between lead nitrate solution and potassium iodide solution. Pb(NO3)2(aq)+2KI → PbI2(s)+2KNO3(aq) In this reaction, colour changes from colourless to yellow. (ii)Change in temperature: Action of dilute sulphuric acid on zinc. Zn(s) + H2SO4(aq) → ZnSO4(aq) + H2 In this reaction, heat is evolved (iii) Formation of precipitate: Action of barium chloride on sodium sulphate. BaCl2(aq) +Na2SO4(aq) →  BaSO4(s) +2NaCl(aq) BaSO4(s)

Answer:

the answer is C

Explanation:

Answer:

a

Explanation:

the answer to the question is a

Among the following chemical equations, redox reaction is [tex]3 MnO_2+4 Al\rightarrow 3 Mn +2 Al_2O[/tex].

The redox reaction can be defined as a reaction that involves the transfer of electrons between two species. Redox reactions comprise of two parts a reduced part and an oxidized part, which occur simultaneously . The part which is reduced gain electrons and hence there is a increase in oxidation state of the species.

While, the part which is oxidized looses electrons and hence there is a decrease in oxidation state of the species.During redox reactions, there is no net change in the number of electrons . Electrons which are given off in oxidation are used up in reduction.

Therefore, the correct option is B.

Learn more about redox reactions,here:

https://brainly.com/question/28300253

#SPJ4

Answer:

just until it covers the sample

a low setting and increasing gradually

pipet

as little solvent as possible

Explanation:

In order to dissolve a chemical sample in a recrystallization solvent, add the room-temperature solvent just until it covers the sample in an Erlenmeyer flask on a hot plate. Turn on the heat, starting at a low setting and increasing gradually. Using a pipet, add additional solvent from a second container on the heat source. Swirl the sample flask after each addition, and try to add as little solvent as possible in order to dissolve the solid.

Answer:

An earthquake could occur.

Answer:

The correct answer is (lava)

Explanation:

Youre welcome    

When the plates move they collide or spread apart allowing the very hot molten material called lava to escape from the mantle. When collisions occur they produce mountains, deep underwater valleys called trenches, and volcanoes.

Answer:

safety glasses, safety goggles, face shield, they protect your eyes from harmful liquids, bright lights

Answer:

C . Air resistance

Explanation:

Answer:

Gravity (D)

Explantion:

The more mass the more gravitational force

the more distance the less gravitational force

Answer:

mountian lion

Explanation:

Answer:

CnH2n+2

Explanation:

Alkane have double and two atoms of hydrogen than carbon atoms

Like C4H10

n = 4

CnH2n+2

C4H2×4+2

C4H10

Answer:

stratosphere

Explanation:

Answer:

% recovery

MP range of product

mass of product

Explanation:

Liquid–liquid extraction (LLE) is a process of transferring one (or more) solute(s) which are present in a feed solution to another immiscible liquid (solvent). The other solvent that becomes enriched in the target solute(s) is called extract. The original feed solution that is depleted in solute(s) is subsequently referred to as the raffinate.

This method is used to purify compounds and  separate mixtures of compounds. This is very important when we want to isolate a product from a reaction mixture.

The percent recovery is the amount of solute that is transferred to the extract. This is the most important data to be recorded in an LLE experiment.

The melting point range necessarily helps us to identify the product and the mass of solid tells us the quantity of the solid obtained after extraction.

Explanation:

momentum increases with an increase in mass and velocity

Answer:

Explanation:

First convert the grams of Calcium Bromide to moles by using the atomic weight. Then use the formula for molarity, which is moles per liter.

CaBr2 = 199.9 g/mol

10/199.9 = 0.05 moles of CaBr2

[tex]0.5M=\frac{0.05mol}{x}[/tex]

x = 0.1L or 100mL

Answer:

a. True

Explanation:

The formula for determining the gold bromide formula, aqueous solution is added. When the solution is introduced with aluminum metal, the gold bromide reacts and displaces the gold metal. This is an electrolysis technique which is used for metals.

Answer:

1.01atm is the pressure of the gas

Explanation:

The difference in heights in the two sides is because of the difference in  pressure of the enclosed gas and the atmospheric pressure. This difference is in mm of the nonvolatile liquid. The difference in mm Hg is:

32.3mm * (0.993g/mL / 13.6g/mL) = 2.36mmHg

As atmospheric pressure is 765mm Hg and assuming the gas has more pressure than the atmospheric pressure (There is no illustration), the pressure of the gas is:

765mm Hg + 2.36mm Hg = 767.36 mmHg

In atm:

767.36 mmHg * (1atm / 760 mmHg) =

1.01atm is the pressure of the gas

Given:

Now,

The density of Hg will be:

= [tex]\frac{13.6}{0.791}[/tex]

= [tex]17.2 \ mm[/tex]

then,

= [tex]32.3\times (\frac{1 \ mm \ Hg}{17.2} )[/tex]

= [tex]18.73 \ mm \ Hg[/tex]

hence,

The pressure will be:

= [tex]765-18.73[/tex]

= [tex]746.27 \ mm \ Hg[/tex]

= [tex]0.993 \ atm[/tex]

Thus the above answer is right.

Learn more about gas vessel here:

https://brainly.com/question/7205294

Marine west coast, humid subtropical, and Mediterranean.

Answer: 15.0 g of [tex]CCl_4[/tex] will be formed upon the complete reaction of 27.7 grams of chlorine gas with excess carbon disulfide

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} Cl_2=\frac{27.7g}{71g/mol}=0.390moles[/tex]

The balanced chemical reaction is:

[tex]CS_2(g)+4Cl_2(g)\rightarrow CCl_4(l)+2SCl_2(s)[/tex]

[tex]Cl_2[/tex] is the limiting reagent as it limits the formation of product and [tex]CS_2[/tex] is the excess reagent.

According to stoichiometry :

4 moles of [tex]Cl_2[/tex] give=  1 mole of [tex]CCl_4[/tex]

Thus 0.390 moles of  will give = [tex]\frac{1}{4}\times 0.390=0.0975moles[/tex] of [tex]CCl_4[/tex]

Mass of [tex]CCl_4=moles\times {\text {Molar mass}}=0.0975\times 154=15.0g[/tex]

Thus 15.0 g of [tex]CCl_4[/tex] will be formed upon the complete reaction of 27.7 grams of chlorine gas with excess carbon disulfide

Answer:

%N = 25.94%

%O = 74.06%

Explanation:

Step 1: Calculate the mass of nitrogen in 1 mole of N₂O₅

We will multiply the molar mass of N by the number of N atoms in the formula of N₂O₅.

m(N): 2 × 14.01 g = 28.02 g

Step 2: Calculate the mass of oxygen in 1 mole of N₂O₅

We will multiply the molar mass of O by the number of O atoms in the formula of N₂O₅.

m(O): 5 × 16.00 g = 80.00 g

Step 3: Calculate the mass of 1 mole of N₂O₅

We will sum the masses of N and O.

m(N₂O₅) = m(N) + m(O) = 28.02 g + 80.00 g = 108.02 g

Step 4: Calculate the percent composition  of N₂O₅

We will use the following expression.

%Element = m(Element)/m(Compound) × 100%

%N = m(N)/m(N₂O₅) × 100% = 28.02 g/108.02 g × 100% = 25.94%

%O = m(O)/m(N₂O₅) × 100% = 80.00 g/108.02 g × 100% = 74.06%

Answer:

2a. Calcium chloride

2b.hydrochloride acid

2c. water molecules

2d.hydrochloric acid

2e.carbon dioxide

Explanation:

CaCO3+2HCl＝CaCl2+CO2+H2O

Answer:

At even lower levels mountain lands grade into other types of landform and vegetation—e.g., tropical or temperate forest, savanna, scrubland, desert, or tundra. The largest and highest area of mountain lands occurs in the Himalaya -Tibet region; the longest nearly continuous mountain range is that along the west coast of the Americas from Alaska in the north to Chile in the south.

eh-

Explanation:

The electronic configuration is the depiction of the electron present in the atomic shells. The ground-state electron configuration containing three unpaired 6p electrons is bismuth.

The electronic configuration is said to be the representation of the distribution of the electrons in the orbitals or the sub-shell of the atom. It shows the arrangement from the lower to higher energy levels.  

The element which contained an unpaired 6p electron is bismuth (Bi). It has an atomic number, 83, and an electron configuration: [Xe] 4f¹⁴5d¹⁰6s²6p³. The p orbital can accommodate six electrons and hence the three electrons are unpaired.

Therefore, in the electronic configuration with unpaired 3p orbitals, the element will be bismuth.

Learn more about electron configuration, here:

https://brainly.com/question/17521393

#SPJ2

Your question is incomplete, but most probably your full question was, The ground-state electron configuration contains three unpaired 6p electrons, what is the element symbol?

[tex]\displaystyle 6 \ mol \ N_2[/tex]

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

[RxN - Balanced] N₂ + 3H₂ → 2NH₃

[Given] 12 mol NH₃

[Solve] x mol N₂

Step 2: Identify Conversions

[RxN] 1 mol N₂ → 2 mol NH₃

Step 3: Stoich

Answer:

[tex]\boxed {\boxed {\sf 6 \ moles \ of \ N_2}}[/tex]

Explanation:

1. Balance Equation

We are given the reaction:

[tex]1 N_2+3H_2 \rightarrow 2 NH_3[/tex]

The equation is already balanced. Both sides have 2 moles of nitrogen and 6 moles of hydrogen.

2. Conversions

In this reaction, 1 mole of nitrogen produces 2 moles of nitrogen tryhdride:

[tex]1 \ mol \ N_2 \rightarrow 2 \ mol \ NH_3[/tex]

3. Stoichiometry Calculations

Use the conversion rate as a fraction.

[tex]\frac{ 1 \ mol \ N_2}{2 \ mol \ NH_3}[/tex]

Multiply the number of moles of nitrogen trihydride produced: 12 moles.

[tex]12 \ mol \ NH_3 *\frac{ 1 \ mol \ N_2}{2 \ mol \ NH_3}[/tex]

The moles of nitrogen trihydride cancel.

[tex]12 *\frac{ 1 \ mol \ N_2}{2} = \frac{ 12 \ mol \ N_2}{2}[/tex]

[tex]6 \ mol \ N_2[/tex]

6 moles of nitrogen are needed to produce 12 moles of nitrogen trihydride.

Answer:

Noble gases

Explanation:

Noble gases have filled electron shells (group 18=8 electrons) and are all odorless, colorless, monatomic gases with very low chemical reactivity.

Answer:

D. anions ; +1

Explanation:

Alkali metals tend to lose one electron and form ions with a single positive charge. 'alkali metals typically lose 1 eclectron to form anions with a charge of +1".