Answer:
Personally, I use Superglue
Explanation:
Would you expect a Boron (B) atom with atomic mass = 9.999 to be stable?
The balance of forces allows to find the result for the question if the isotope of boron 9.99 una is stable:
The boron isotope of mass 9.99 uma is unstable because the repulsive force increases.The stability of atomic nuclei depends on the balance the force is electrostatic repulsion between the protons and the strong interaction of attraction.
One way to achieve this balance is to increase the separation of the protons with uncharged particles between them, the neutral ones, the strong interaction is of the same magnitude for protons and neutrons, therefore the repulsion is decreased and the strong attraction interaction is maintained. .
In the case of Boron, which has 5 protons, the stable structures have more atomistic 10 and 11 una, which is why it has 5 and 6 neutrons each. Therefore each proton has a neutrons next to it and in the other case a proton at the end has two neutrons, this causes the distance between the protons to increase, decreasing the electrostatic repulsion.
It indicates that we have a Boron nucleus of mass 9.999. The number of protons must remain fixed, therefore there are only 4 neutrons.
Consequently, some of the protons does not have a neutron next to it and can approach the other proton, therefore the electrostatic repulsion increases and the stability of the atom decreases.
In conclusion, using the balance of Forces we can find the result for the question if the isotope of boron 9.99 una is stable:
The boron isotope of mass 9.99 amu is unstable because the repulsive force increases.Learn more about nuclear stability here: https://brainly.com/question/897383
Diazene, N2H2 (also known as diimine), is commonly used as a reagent for organic syntheses. Label each image with the type of
bond in diazene that it shows.
The first image shown at the left hand side is a pi bond. The other two images show sigma bonds.
In chemistry, a bond results from the overlap of atomic orbitals. This overlap may be end to end (sigma bond) or side by side (pi bond). Having said this, it is easier to decide whether the bonds in the image shown are sigma or bi bonds.
If we label the images; 1,2,3 from left to right, we can see that the overlap in image 1 is side by side. The electron density lies above and below the plane of the bond. This is a pi bond. In images 2 and 3, the overlap occurs in an end to end manner. This is a sigma bond.
Learn more: https://brainly.com/question/14018074
What is the total pressure exerted by a mixture containing two gases if the partial pressure of one gas is 70 kPa and the partial pressure of the other gas is 30 kPa?
Answer:
The total pressure of a mixture of gases can be defined as the sum of the pressures of each individual gas: Ptotal=P1+P2+… +Pn. + P n . The partial pressure of an individual gas is equal to the total pressure multiplied by the mole fraction of that gas.
Explanation:
hope this helps have a wonderfull day!
I have a problem with solving this type of chemistry problem. Please Help!
What is the wavelength, in nanometers, of light with a frequency of 1.97x10^15 Hz?
a) 1.52 nm
b) 1.52x10^-7 nm
c) 152 nm
d) 15.2 nm
Name three sources of atmospheric carbon dioxide.
Answer:
Natural sources include decomposition, ocean release and respiration. Human sources come from activities like cement production, deforestation as well as the burning of fossil fuels like coal, oil and natural gas.
convert 8.4 • 10^16 molecules of CO2 to moles
Answer:
0.00000000000000084
Explanation:
An ammonia solution has a pH of 8.25. What is its [OH-]?
pH + pOH = 14
If pH=8.25, then:
pOH = 14 - 8.25 = 5.75
pOH = -log[OH-]
5.75 = -log[OH-]
-5.75 = log[OH-]
10^(-5.75) = [OH-]
[OH-] = 0,0000017783
[OH-] = 1,78×10^(-6) mol/dm³
Which of the following best represents a chemical change?
A. Chopping wood
B. Silver tarnishing (changing color)
C. Grape kool-aid mix dissolving in water
D. Dry ice turning into a gas (sublimation- a change of state)
B. silver tarnishing
Why does the Hubble Space Telescope take clearer pictures than other telescopes?
Answer:
Space-based telescopes like Hubble get a much clearer view of the universe than most of their ground-based counterparts. ... Ground-based telescopes can't do the same, because the Earth's atmosphere absorbs a lot of the infrared and ultraviolet light that passes through it.
what is the chemistry of super glue
cyanoacrylate
When cyanoacrylate polymerizes, the cyanoacrylate sticks together on an atomic level, and it becomes solid. Super Glue solidifies in all the microscopic crevices of an object that it moved into when it was a liquid, and it can form chemical bonds with any anions in the object.
C= ( F - 32) / 1.8
86 F = ?
Answer:
C = 30
Explanation:
C = (86 - 32)/1.8
C = (54)/1.8
C = 30
increasing temperature increases:
1:Enthalpy
2:Free Energy
3:Entropy
4:Specific heat
Answer:
2 :free energy
Explanation:
I hope it is fine answer for you ☺️☺️☺️
Polyvalent ions are
1) Anions with variable charges
2) Cations from columns 3 to 12
3) Ions that can be positive or negative
If 2.5 moles of PA react completely, how many
moles of P203 are formed?
Answer:
For every 2 moles of Na used, 2 moles of NaCl are produced.
Explanation:
calculate the mass percentage of each element in aluminum oxide.Then calculate themass of aluminum in a 3.62 gram sample of of aluminum
1. The mass percentage of each element in aluminum oxide Al₂O₃ are:
i. The mass percent of Al in Al₂O₃ is 52.9%
ii. The mass percent of O in Al₂O₃ is 47.1%
2. The mass of Al in 3.62 g of Al₂O₃ is 1.73 g
1i. Determination of the percentage of Al
Molar mass of Al₂O₃ = (2×27) + (3×16) = 102 g/mol Mass of Al of Al₂O₃ = 2 × 27 = 54 gPercentage of Al =?Percentage = mass / mass of sample × 100
Percentage of Al = (54 / 102) × 100
Percentage of Al = 52.9%
1ii. Determination of the percentage of O
Molar mass of Al₂O₃ = 102 g/mol Mass of O of Al₂O₃ = 3 × 16 = 48 gPercentage of O =?Percentage = mass / mass of sample × 100
Percentage of O = (48 / 102) × 100
Percentage of O = 47.1%
2. Determination of the mass of Al in 3.62 g of Al₂O₃.
102 g of Al₂O₃ contains 54 g of Al.
Therefore,
3.62 g of Al₂O₃ will contain = (3.62 × 54) / 102 = 1.73 g of Al.
Thus, 1.73 g of Al is present in 3.62 g of Al₂O₃.
Learn more about percentage composition: https://brainly.com/question/3940233
is the effect of hot and cold water on acid different?
Answer:
When the acid is mixed with the water, an immediate chemical reaction takes place. The formation of carbon dioxide causes breakdown of the sample into finer particles.
The heat in the Stomach rises up, causing esophageal reflux, chronic sinusitis, headaches, eye disorders and problems with the teeth. Furthermore, ingesting cold water creates moisture or “dampness.” Bacteria, candida, and parasites thrive in damp areas, especially in your stomach and uterus.
Define Endothermic reaction in terms of Deta H
I didn't learn about that topic in school,but I found this :
I hope it helps<3
1. List the ketose carbon(s) that is(are) reduced with NaBH4.
Answer:
ehh im nit sure but here!
Explanation:
which planet is closests to the moon
Answer:
Earth
Explanation:
Answer:
Earth
Explanation:
Hope this helps! Pls give brainliest! Also, please sub to Kgirl633 on yt.
Which of the following is not part of an amino acid?
A. ammonium group
B. carboxylate group
C. ether group
D. unique "R" group
Answer:
C
Explanation:
Ether group does not exist in amino acids
Ammonium group is on one side
the carboxylate group is opposite to the ammonium group
the R group defines what amino acid it is.
please help me!! DUE TOMORROW :(
Answer:
It’s in the photo, sorry if it’s really messy!
Explanation:
Please ask if you have any questions!
Explain in your own words:
i. Sublimation
ii. Condensation
iii. Melting
Which statement best explains the purpose of using a mole in the measurement of matter? It is commonly used as another unit of mass. It allows chemists to deal with a large number of atoms. It is used only for studying the properties of gases. It explains that substances with the same moles have the same mass.
Answer:
B) It allows chemists to deal with a large number of atoms.
Explanation:
On Edge 2022
The statement which best explains the purpose of using a mole in the measurement of matter is that it allows chemists to deal with a large number of atoms.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons .Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Learn more about mole,here:
https://brainly.com/question/30892840
#SPJ5
Sulfuric acid reacts with sodium carbonate to form water, a salt, and a gas. Write the formulas for the salt and other compound that are formed in the reaction.
Answer:
H2So4 + Na2Co3 -> H20 + Na2So4 + CO2
The chemical formulas for the salt and other compound that are formed in the reaction are Na₂SO₄,H₂O and CO₂.
What is chemical formula?Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.
There are four types of chemical formula:
1)empirical formula
2) structural formula
3)condensed formula
4)molecular formula
Learn more about chemical formula,here:
https://brainly.com/question/29031056
#SPJ5
what are the solar home lighting
Answer:
Sunlight
Explanation:
Home lighting System is powered by solar energy using solar cells that convert solar energy (sunlight) directly to electricity. The electricity is stored in batteries and used for the purpose of lighting whenever required
Which of the following is a challenge of prosthetic engineering that has been met through tissue engineering?
- Predicting failure
- Biocompatibility
- Strength
- Power
Answer:
Biocompatibility
Explanation:
I’m a genius and it’s the answer :D
Biocompatibility is a challenge of prosthetic engineering that has been met through tissue engineering. Hence, option B is correct.
What is Biocompatibility?Biocompatible materials are used in medical devices, such as menstrual cups, stents, or ventilators.
A biocompatibility problem might happen when some of the materials are trapped in the patient's gingival sulcus.
Tissue engineering is an important field of regenerative medicine for tissue repair (after damaged caused by a disease or an accident, for example).
To offer this possibility, stem cells are important tools owing to their capacity to differentiate into a large number of cells according to the stimuli provided.
Hence, option B is correct.
Learn more about Biocompatibility here:
https://brainly.com/question/16037547
#SPJ2
how many compounds can I make with sodium, hydrogen, oxygen?
will give brainliest and 100 points to the correct answer
Answer:
маны
Explanation:
Answer:
2H2 + O2 → 2H2O
Explanation:
Can someone please help. I have no idea how to do this
Explanation:
c-o number if electrons shared: 4. doubke bond. non polar
c-cl 2 electrons sharde single bond non polar
I know this cause one dash equals 2 electrons chemistry teachers use them when two compounds are sharing electrons rather then using two dots so people know the difference
Which pair of elements form an ionic bond with
each other?
A. KCL
B. ICL
C. PCL
D. HCL
I think it’s A and D but if it’s not both can you please explain why it’s one and not the other?
Answer:
Yes Both A) KCL and D) HCL are correct...
Answer:
It's only A
Explanation:
Potassium (K) is a metal and Chlorine (Cl) is a nonmetal, and ionic compounds are formed between metals and nonmetals. So KCl forms ionic bonds.
Hydrogen (H) and Chlorine (Cl) are both nonmetals, and only covalent bonds form between nonmetals. (Only exception is when its an acid, then it's ionic)
Also, the question indicated which "pair" and not "pairs" meaning that there is only one answer, and I'm more likely to go with A rather than D.