Answer:
A
Explanation:
Because I said so
Answer:
A
Explanation:
i took the test and got it right please mark me ❤️
Based on the data, which statement describes the most reliable way to
encode and transmit data and tells why?
A. Digital waves are more reliable because they are less likely to
change when copied.
B. Analog waves are more reliable because they include a range of
values like the original.
C. Analog waves are more reliable because they are less likely to
change when copied.
D. Digital waves are more reliable because they are slightly different
from the original.
Answer:it’s A. right for ape x
Explanation:
Based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
What is a wave?A wave is a periodic distortion capable of traveling through a suitable media (either air or water).
The waves can be classified according to their direction into transversal and perpendicular.In conclusion, based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
Learn more on waves here:
https://brainly.com/question/15663649
#SPJ2
What quantity measures the amount of space an object occupies?
A. Volume B.Temperature C. Mass D. Density
Answer:
mas
Explanation:
mass is the amount of space something occupies.
If the car has a mass of 0.2 kg, the ratio of height to width of the ramp is 12/75, the initial displacement is 2.25 m, and the change in momentum is 0.58 kg*m/s, how far will it coast back up the ramp before changing directions
Answer:
l = 0.548 m
Explanation:
For this exercise we compensate by finding the speed of the car
p = m v
v = p / m
v = 0.58 / 0.2
v = 2.9 m / s
this is how fast you get to the ramp, let's use conservation of energy
starting point. Lowest point
Em₀ = K = ½ m v²
final point. Point where it stops on the ramp
[tex]Em_{f}[/tex] = U = m g h
mechanical energy is conserved
Em₀ = Em_{f}
½ m v² = m g h
h = [tex]\frac{m v^2}{2 g}[/tex]
let's calculate
h = [tex]\frac{0.2 \ 2.9^2}{2 \ 9.8}[/tex]
h = 0.0858 m
to find the distance that e travels on the ramp let's use trigonometry, we look for the angle
tan θ = y / x
tan θ = 12/75 = 0.16
θ = tan⁻¹ 0.16
θ = 9º
therefore
sin 9 = h / l
l = h / sin 9
l = 0.0858 / sin 9
l = 0.548 m
Hearing rattles from a snake, you make two rapid displacements of magnitude 1.8 m and 2.4m. Draw sketches, roughly to scale, to show how your two displacements might add to give the following resultant of magnitudes.
a. 4.2 m
b. 0.6 m
c. 3.2 m
Answer:
The answer is a 4.2m
Explanation:
Given data
Please see attached the rough drawing for your reference.
From the drawing, you ran 18m west and 2.4m south
The displacement is
= 1.8+2.4
=4.2m
Do You think History is the most important subject that deserves first place? Do you see a way that learning history could assist you in your future career?
yes
Explanation:
history is an important class and it helps to you understand what went on in the past so that we can learn from our mistakes and help us grow
A plane wishes to fly due north to an airport which is 205 km away. The plane can fly at a speed in still air of 220 km/h. A wind of 43 km/h blows from east to west.
a. In which direction,relative to north, should the plane head to reach it’s destination?
b. How long does this take?
Answer:
nique ta mama
Explanation:
Please Help! Will mark brainliest.
Answer:W = m*g*h
19*9.8*32.4 = 6,032.9 rounded
honestly, I do not know if this is correct so please don't come back at me
hopefully this helps
Explanation: [do the following, if you think I am wrong]
just pick a formula,
plug in the number to the mass, gravity, and height
than multiply
get your answer, but don't forget to round to the nearest tenth
Two loudspeakers are about 10 mm apart in the front of a large classroom. If either speaker plays a pure tone at a single frequency of 400 HzHz, the loudness seems pretty even as you wander around the room, and gradually decreases in volume as you move farther from the speaker. If both speakers then play the same tone together, what do you hear as you wander around the room
Answer:
I hear points of low volume sound and points of high volume of sound.
Explanation:
This is because, since the two sources of sound have the same frequency and are separated by a distance, d = 10 mm, there would be successive points of constructive and destructive interference.
Since their frequencies are similar, we should have beats of high and low frequency.
So, at points of low frequency, the amplitude of the wave is smallest and there is destructive interference. The frequency at this point is the difference between the frequencies from both speakers. Since the frequency from both speakers is 400 Hz, we have, f - f' = 400 Hz - 400 Hz = 0 Hz. So, the volume of the sound is low(zero) at these points.
Also, at points of high frequency, the amplitude of the wave is highest and there is constructive interference. The frequency at this point is the sum between the frequencies from both speakers. Since the frequency from both speakers is 400 Hz, we have, (f + f') = 400 Hz + 400 Hz = 800 Hz. So, the volume of the sound is high at these points.
So, as you wander around the room, I should hear points of high and low sound across the room.
.1 An 8-ft 3 tank contains air at an initial temperature of 808F and initial pressure of 100 lbf/in. 2 The tank develops a small hole, and air leaks from the tank at a constant rate of 0.03 lb/s for 90 s until the pressure of the air remaining in the tank is 30 lbf/in. 2 Employing the ideal gas model, determine the final temperature, in 8F, of the air remaining in the tank
Correct temperature is 80°F
Answer:
T_f = 38.83°F
Explanation:
We are given;
Volume; V = 8 ft³
Initial Pressure; P_i = 100 lbf/in² = 100 × 12² lbf/ft²
Initial temperature; T_i = 80°F = 539.67 °R
Time for outlet flow; t_o = 90 s
Mass flow rate at outlet; m'_o = 0.03 lb/s
Final pressure; P_f = 30 lbf/in² = 30 × 12² lbf/ft²
Now, from ideal gas equation,
Pv = RT
Where v is initial specific volume
R is ideal gas constant = 53.33 ft.lbf/°R
Thus;
v = RT/P
v_i = 53.33 × 539.67/(100 × 12²)
v_i = 2 ft³/lb
Formula for initial mass is;
m_i = V/v_i
m_i = 8/2
m_i = 4 lb
Now change in mass is given as;
Δm = m'_o × t_o
Δm = 0.03 × 90
Δm = 2.7 lb
Now,
m_f = m_i - Δm
Thus; m_f = 4 - 2.7
m_f = 1.3 lb
Similarly in above;
v_f = V/m_f
v_f = 8/1.3
v_f = 6.154 ft³/lb
Again;
Pv = RT
Thus;
T_f = P_f•v_f/R
T_f = (30 × 12² × 6.154)/53.33
T_f = 498.5°R
Converting to °F gives;
T_f = 38.83°F
The final temperature, in °F, of the air remaining in the tank is 38.83°F
It is given that volume V = 8 ft³
Initial Pressure Pi = 100 lbf/in² = 100 × 12² lbf/ft²
Initial temperature Ti = 80°F = 539.67 °R
Time for outlet flow; to = 90 s
Mass flow rate at outlet; m'o = 0.03 lb/s
Final pressure; Pf = 30 lbf/in² = 30 × 12² lbf/ft²
Now, from ideal gas equation,
Pv = RT
where v is initial volume, R is ideal gas constant = 53.33 ft.lbf/°R
[tex]v = RT/P\\ \\ v_i = 53.33 *539.67/(100*12^2)\\ \\ v_i = 2 ft^3/lb [/tex]
The initial mass is;
[tex]m_i = V/v_i\\ \\ m_i = 8/2\\ \\ m_i = 4 lb [/tex]
Now change in mass is given as;
Δm = [tex]m'_o*t_o[/tex]
Δm = 0.03 × 90
Δm = 2.7 lb
[tex]m_f[/tex] = [tex]m_i[/tex] - Δm
[tex]m_f[/tex] = 4 - 2.7
[tex]m_f[/tex] = 1.3 lb
now,
[tex]v_f = V/m_f\\ \\ v_f = 8/1.3\\ \\ v_f = 6.154 f^3/lb [/tex]
From the gas equation
Pv = RT
Final state:
[tex]T_f = P_fv_f/R\\\\ T_f = (30*12^2*6.154)/53.33\\\\ T_f = 498.5^oR [/tex]
Converting to °F:
[tex]T_f[/tex] = 38.83°F is the final temperature.
Learn More:
https://brainly.com/question/18518493
Which of the following is NOT a characteristic of noble gases?
unreactive
odorless
solid at room temperature
colorless
To have the highest magnification in a telescope, the focal length of the objective lens should be _________ and the focal length of the eyepiece lens should be ________. To have the highest magnification in a telescope, the focal length of the objective lens should be _________ and the focal length of the eyepiece lens should be ________. small; small small; large large; small large; large
Answer:
Large; small.
Explanation:
A telescope can be defined as an optical instrument or device which comprises of a curved mirror and lenses used for viewing distant objects i.e objects that are very far away such as stars and other planetary bodies. The first telescope was invented by Sir Isaac Newton.
To have the highest magnification in a telescope, the focal length of the objective lens should be large and the focal length of the eyepiece lens should be small.
This ultimately implies that, the eyepiece lens has a small focal length while the objective lens has a large focal length.
In the 1986 Olympic Games, Abdon Pamich of Italy won the 50 km walk, in
4h, 11 min and 11.2 s. Find his average speed in m/s.
Answer: 4
Explanation: because my pet monkey said it was
true or false solubility can be used to identify an unknown substance
A 0.500 cm diameter plastic sphere, used in a static electricity demonstration, has a uniformly distributed 44.0 pC charge on its surface. What is the potential near its surface
Answer:
Explanation:
Radius of sphere R = .250 x 10⁻² m
Potential on the surface V = k Q / R , where Q is charge on the surface , R is radius of the surface and k = 9 x 10⁹
Q = 44 x 10⁻¹² C
V = 9 x 10⁹ x 44 x 10⁻¹² / ( .25 x 10⁻²)
= 1584 x 10⁻¹ Volt .
= 158.4 Volt
plsss answer this plsss answer this plsss answer this plsss answer this
Answer:
I dont see file
dndndndbnfbfbfbfbfbf
Answer:
ye ek rod h or electric ⚡ field h P point
Which of the following sentences is an example concerns smerne might have at lunchtime?
I would be to have brocoll stead of fres,
I wonder if my chicken is ooked all the way
I have never ordered smething I did not ke,
of ordered a salad with the dressing on the site
Answer:
yes
Explanation:
becausw yesnssjsdkwww
how is friction involved in the movement of space
Answer:
Friction can stop or slow down the motion of an object.
Explanation:
The slowing force of friction always acts in the direction opposite to the force causing the motion.
Which option tells the forces that influence the movement of earths plates
Answer:
Gravity
Explanation:
Which formula is used to find an objects acceleration
Answer:
a=∆v/∆t
Explanation:
The definition of Acceleration is the change in velocity in a given time. So this means you first calculate ∆v (Change in velocity), and you calculate ∆t which is the time taken to apply that change in velocity. Then you find a= ∆v/∆t. This gives us the equation of Acceleration.
Answer:
C. a=∆v/∆tExplanation:
Pulling a rubber band back and then letting it fly across the room is an example of
A. converting energy to work
B. converting elastic energy to gravitational
C. converting kinetic energy to potential
Answer:
b
Explanation:
because a elastic band uses elastic energy
The nearest neighbor interaction force is of magnitude 481 nanoNewtons, e.g., the magnitude of the force of the leftmost electron on the proton, or the magnitude of the force of any of the three on its nearest neighbor electron. Calculate the size of the net force on the leftmost proton.
Answer:
F = 120.25 10⁻⁹ N
Explanation:
In this exercise, the force between the closest neighbors is indicated by f = 481 10⁻⁹ N, in general between the one-dimensional solid the distances remain the same, if the distance between the first neighbor is d, the distance between the second neighbors is 2d.
For most solids the attractive forces are electrical, therefore force is proportional to the electrical charges and the inverse of the distance squared,
F = [tex]k \frac{q_1 q_2}{r^2}[/tex]
if we call fo the force for the first neighbors
F₀ = k \frac{q_1 q_2}{d^2}
the force for the second neighbors r= 2d
F = k \frac{q_1 q_2}{(2d)^2}
F = F₀ / 4
let's calculate
F = 481 10⁻⁹ / 4
F = 120.25 10⁻⁹ N
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer:
10 J.
Explanation:
Given that,
Net force acting on the rake, F = 2 N
Distance moved by the rake, d = 5 m
We need to find the kinetic energy gained by the rake. We know that,
Kinetic energy = work done
So,
K = F×d
K = 2 N × 5 m
K = 10 J
So, 10 J of kinetic energy is gained by the rake.
Violet pulls a rake horizontally on a frictionless driveway with a net force of 2.0 N for 5.0 m.
How much kinetic energy does the rake gain?
Answer: 10 J
HELP ASAP PLS
A balloon with a positive charge will stick to a wall that has a negative charge.
What force causes this?
A. Gravity
B. Electric force
C. Magnetic force
D. Air gesistance
Astronomers study the electromagnetic radiation emitted by distant stars and planets to determine things like: how far away they are, their temperatures and speed, etc. Based on what you learned in this class, explain why the NASA Hubble Space Telescope is better for observing the electromagnetic radiation emitted from stars and planets at 560 km above sea level compared to the Keck telescope in Hawaii, which is 4 km above sea level
Answer:
This same Hawaii telescope, which would be 4 km across water level, can't provide an appropriate version of distanced planetary bodies. A further overview is provided below.
Explanation:
The surface area of that same earth's orbit seems to be approximately 480 km heavy. The atmosphere isn't translucent to the only certain wavelength range of the radioactivity. Not because all-stars, as well as gliders, emit specific wavelengths, but several of them generate ultraviolet as well as infrared. Those same radiations have either been mediated primarily as well as passes through the atmosphere. Due to the Blockage, they can't even be interpreted with such a similar quality unless the telescope would be positioned throughout the portion of the atmosphere.Which object would have the greatest acceleration?
Answer:
D
Explanation:
A and C are balanced, B has a resultant force of 5N right, and D has a resultant force of 20N right.
What term is used to describe DNA Replication?
Conservative
Un-conservative
Non-conservative
Semi-conservative
Answer:
Semi-conservative
Explanation:
Each strand of the original DNA molecule serves as a template for the production of its counterpart
A pendulum has a period of 5.14s and a length of 0.25m. What is the acceleration
due to gravity? *
Answer:
Acceleration due to gravity, g = 2.68m/s²
Explanation:
Given the following data;
Period = 5.14s
Length = 0.25m
To find acceleration due to gravity, g;
[tex] Period, T = 2 \pi \sqrt {lg} [/tex]
Substituting into the equation, we have;
[tex] 5.14 = 2*3.142 \sqrt {0.25g} [/tex]
[tex] 5.14 = 6.284 \sqrt {0.25g} [/tex]
[tex] \frac {5.14}{6.284} = \sqrt {0.25g} [/tex]
[tex] 0.8180 = \sqrt {0.25g} [/tex]
Taking the square of both sides
[tex] 0.8180^{2} = 0.25g [/tex]
[tex] 0.6691 = 0.25*g[/tex]
[tex] g = \frac {0.6691}{0.25} [/tex]
Acceleration due to gravity, g = 2.68m/s²
How do projectors project the color black?
Answer:
Projectors do not project the color black. This makes sense since black is really the absence of light, and you can't project something that does not exist. When a projector sends a beam of light on to a wall or a projector screen so that an image is formed on the wall or screen, the parts of the image that look black are really a very dim white color (which we sometimes call gray). - wtamu
Answer is:
Projectors do not project the color black.
6 An object can never have
A. a positive speed.
B. a negative speed.
C. a positive velocity.
D. a negative velocity.
Answer:
B
Explanation:
Speed is the magnitude of the velocity vector, so it can never be negative.
An object can never have a negative velocity. Therefore, option (D) is correct.
What is velocity?Velocity is a vector quantity that describes an object's speed and direction of motion. If an object is moving in a positive direction, it has a positive velocity. If it is moving in the opposite direction, it has a negative velocity.
However, an object can never have a negative speed. Speed is a scalar quantity that describes an object's rate of motion, and it is always positive. The speed of an object can be positive or negative, depending on the direction of its velocity, but the magnitude of its speed is always positive.
Learn more about velocity, here:
https://brainly.com/question/18084516
#SPJ6
Heart Disease is the number one cause of preventable death in the United States
A True
B False
Heart disease is the leading cause of death for both men and women. This is the case in the U.S. and worldwide. More than half of all people who die due to heart disease are men.
TRUE