Answer:
(C) when bonds in food are broken, energy is released
Is liquid ammonia a household acid?
Yes it is an cleaning product
Answer:
yes
Explanation:
it cleans in the house
A student added copper wire to a flask containing silver nitrate after a period of three hours,the flask and its contents looked like this Did a chemical reaction occur? Use evidence and scientific reasoning to support your claim
Answer:
Yes
Explanation:
Cause the student add wire To the flash and changed colour
Answer: Yes
Explanation: Because the color changed and one of the ways to see if a chemical reaction occured is color change.
What solid figure has two bases, but no lateral faces?
cylinder
rectangular prism
triangular prism
cone
Answer:
it is cylinder as it has two bases but no lateral faces.
can someone help me with 5?
Answer:28 g
Explanation:
Environments have changed over millions of years. Which of these would be best for a scientist to study when investigating these environmental changes?
A. volcanic deposits
B. weather forecasts
C. fossil records
D. ocean currents (There is no science subject so ima put mathematics)
Answer:
c
Explanation:
fossil records
How many moles can be found in 1.5 x 10^24 atoms of Calcium?
How many grams of Mg(NO3), are necessary to
make 1500 mL of a 0.50 M solution?
Answer:
1.1 × 10² g
Explanation:
Step 1: Given data
Concentration of the solution (C): 0.50 M (0.50 mol/L)Volume of solution (V): 1500 mL (1.500 L)Step 2: Calculate the moles of Mg(NO₃)₂ (solute)
Molarity is equal to the moles of solute (n) divided by the liters of solution.
C = n/V
n = C × V
n = 0.50 mol/L × 1.500 L = 0.75 mol
Step 3: Calculate the mass corresponding to 0.75 moles of Mg(NO₃)₂
The molar mass of Mg(NO₃)₂ is 148.3 g/mol.
0.75 mol × 148.3 g/mol = 1.1 × 10² g
A sample of gas initially has a volume of 2.25 L at 350 K and a pressure of 1.75 atm. What will be sample pressure if the volume is
changed to 1.00 L and the temperature to 750 K
O 3.75 atm
O 1.84 atm
O 3.94 atm
O 8.44 atm
O 0.119 atm
Answer:
8.44 atm
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 2.25 L
Initial temperature (T₁) = 350 K
Initial pressure (P₁) = 1.75 atm
Final volume (V₂) = 1 L
Final temperature (T₂) = 750 K
Final pressure (P₂) =?
The final pressure of the gas can be obtained as illustrated below:
P₁V₁/T₁ = P₂V₂/T₂
1.75 × 2.25 / 350 = P₂ × 1 / 750
3.9375 / 350 = P₂ / 750
Cross multiply
350 × P₂ = 3.9375 × 750
350 × P₂ = 2953.125
Divide both side by 350
P₂ = 2953.125 / 350
P₂ = 8.44 atm
Thus, the final pressure of the gas is 8.44 atm.
If a drum skin vibrates with a frequency of 100 Hz, how many times does it move up and down each second?
( Chemistry )
Choose the options below that are true of chemical equilibria.
A. The reaction proceeds in the forward and reverse directions at the same rate.
B. Both the forward and the reverse reactions are achievable.
C. The relative amounts of all species must be different.
D. There is no net change in concentrations of reactants and products.
Answer:
A. The reaction proceeds in the forward and reverse directions at the same rate.
B. Both the forward and the reverse reactions are achievable.
D. There is no net change in concentrations of reactants and products.
Explanation:
Chemical equilibrium can be defined as the state of a reversible reaction in which the concentration (rate) of the forward reaction is equal to the concentration (rate) of the backward or reverse reaction. Thus, both the reactants and products of the chemical equation don't have the tendency to change with respect to time.
Hence, the options that are true of chemical equilibria include the following;
I. The reaction moves in both forward and reverse directions simultaneously i.e at the same rate.
II. The chemical equation can attain both forward and reverse reactions.
III. The concentrations of both reactants and products are the same i.e there's no net change.
Answer:
A B D knewton
Explanation:
Write the chemical symbols for three different atomic cations that all have 14 protons.
Explanation:
The symbols for three different cations with 14 protons are Si²⁺, Si⁴⁺, and Si³⁺. An element with 14 protons must be silicon, Si. Its electron configuration is [Ne] 3s²3p², so it could lose up to four valence electrons. The most likely cations are Si²⁺, Si⁴⁺, and Si³⁺ (or Si⁺)
1
is the amount of space
that matter in an object occupies.
intermolecular dehydration of alkanols will gives what?
Answer:
One way to synthesize alkenes is by dehydration of alcohols, a process in which alcohols undergo E1 or E2 mechanisms to lose water and form a double bond. The dehydration reaction of alcohols to generate alkene proceeds by heating the alcohols in the presence of a strong acid, such as sulfuric or phosphoric acid, at high tempera (sorry if this is wrong )
r.
25. An organic compound (A) C3H5N, undergoes reduction with
LiAlHe to give (B), CzHgN. Compound (B) reacts with
chloroform and KOH to give an unpleasant smell. Compound
(B) reacts with sodium nitrite and hydrochloric acid to give
(C), C3H80, which on treatment with conc. H2SOа acid gives
(D) C3H6. (D) on reaction with conc. H2SO4 and subsequent
hydrolysis yield an isomer of (C). Identify A, B, C, D with
proper explanation and chemical reactions.
frivolont metal was
Answer:
A - Nitrile compound
B- AlkylAmine
C- Alcohol
D - Alkene
Explanation:
(A) undergoes reduction to form alkylamine.
(B) is a primary alkyl amine which on carbylamine test gives a foul smell.
(B) reacts with NaNO2 + HCl undergoes diasotisation following which alcohol is produced.
(C) being a alcohol undergoes hydrolysis to give alkene.
(D) On further reaction with H2S04 by the rule of Markownikoff rule it forms a isomer of (C).
Which two changes would make this reaction product-favored? 3H2 + N2 ⇄ 2NH3 + energy  A. Decreasing the pressure  B. Increasing the temperature  C. Increasing the pressure  D. Reducing the temperature
Answer:C and D
Explanation:Just did it
Increasing the pressure and Decreasing the temperature are the two changes would make this reaction product-favored.
What is Equilibrium ?It is a state when a reaction is reversible and both forward and reverse reaction occur simultaneously at the same rate .
In the process of manufacture of Ammonia , both forward and reverse reaction are taking place
N₂(g) + 3H₂ (g) → 2NH₃ (g)
2NH₃(g) → N₂ (g) + 3H₂ (g)
when these reaction occur at same rate , the state is called equilibrium and is represented by
N₂ (g) + 3H₂(g) ⇔ 2NH₃(g) +Heat
As we can see from the equation , heat is produced in the forward reaction so if we increase the temperature the reverse reaction will be favored ,
On decreasing temperature the reaction will become product favored .
While on increasing the Pressure the manufacture of Ammonia increases.
Therefore Option C and Option D are the two changes would make this reaction product-favored.
To know more about Equilibrium
https://brainly.com/question/13463225
#SPJ2
Given [H3O+] = 3.06x10-10 M, find the [OH-].
Show your calculation for full credit
Answer:
3.27*(10^-5) M
Explanation:
For 25°C:
[H3O+] *[OH-] =(10^-14)-->
[OH-]=(10^-14)/[H3O+]-->
[OH-]=(10^-14)/(3.06*10^-10)-->
[OH-]=3.27*(10^-5) M
When an organism eats a plants,the energy and nutrients stored in the consumed organism flows up to the____level
Answer:
Energy is transferred between trophic levels when one organism eats another and gets the energy-rich molecules from its prey's body.
Explanation:
The flow of energy in an ecosystem is always linear ie uni direction. At each energy step in food chain, the energy received by the organisms is used for its own metabolism and maintenance. The left over energy is passed to next higher trophic level. Thus the energy flow decreases with successive trophic level.
The pH of an acidic solution is 5.59. What is [H+]?
Answer:
[H⁺] = 2.57x10⁻⁶ M
Explanation:
This problem can be solved using the definition of pH:
pH = -log[H⁺]
Now we isolate [H⁺] in the equation:
-pH = log[H⁺]
[tex]10^{-pH}[/tex]=[H⁺]
As we are given the pH by the problem, we can now proceed to calculate the [H⁺]:
[H⁺] = [tex]10^{-5.59}[/tex]
[H⁺] = 2.57x10⁻⁶ M
Thus, when the pH of a solution is 5,59; the molar concentration of H⁺ species is 2.57x10⁻⁶.
When the concentration of reactant molecules is increased
Complete question is;
When the concentrations of reactant molecules are increased, the rate of reaction increases. The best explanation for this phenomenon is that as the reactant concentration increases,
A)the average kinetic energy of molecules increases.
B)the frequency of molecular collisions increases.
C)the rate constant increases.
D)the activation energy increases.
E)the order of reaction increases.
Answer:
B) The frequency of molecular collisions increases.
Explanation:
When we increase number of reactant molecules, the effective collision between the reactant molecules will form a product which also increases. As a result, the overall rate of the reaction will also increase which means the frequency of the molecular collision will also increase as well.
Thus, the correct answer is Option B
Can somebody please help me!!!
Answer:
force are called roll
Explanation:
force your answer give me five Points
Answer:
friction
Explanation:
The other terms honestly just don't make any sense in this context. Round objects experience less friction, since they have less of their surface touching the ground at a time. Imagine a bowling bowl: only a small part of the ball is ever touching the ground at one instant. Now imagine a waffle: almost all of the surface is touching the ground.
A 50.0 mL sample of buffer solution contains 0.120 M acetic acid and 0.150 M sodium acetate. If 5.55 mL of 0.092 M NaOH is added to this solution, identify the resulting number of moles of acetic acid, sodium acetate, and NaOH.
Answer:
see calculations below
Explanation:
Given: HOAc ⇄ [H⁺] + [OAc⁻]
C(i) 0.12M 0M 0.15M
mix => 5.55ml(0.092M NaOH) / (50ml + 5.55ml)
= 0.00555(0.092)mole NaOH / 0.0555 L Soln
= 0.0092M in NaOH is added into the initial buffer solution
= 0.0092M in OH⁻ (NaOH is a strong base => 100% ionized)
Rxn => Addition of 0.0092M OH⁻ will react with 0.0092M H⁺ shifting buffer . equilibrium to the right decreasing [HOAc] and increasing [OAc⁻] by . 0.0092M each.
Therfore ...
Given: HOAc ⇄ [H⁺] + [OAc⁻]
C(i) 0.12M 0M 0.15M
ΔC - 0.0092M +x +0.0092M
C(f) 0.1108M x 0.1592M => New Concentrations . after adding 0.0092M . NaOH
Substituting new acid and ion concentrations into Ka expression ...
Ka = [H⁺][OAc⁻]/[HOAc] = (x)(0.1592M)/(0.1108M) = 1.75 x 10⁻⁵M
=> x = [H⁺](new) = (1.75 x 10⁻⁵M*)(0.1108M)/(0.1592M) = 1.22 x 10⁻⁵M in H⁺ ions
*units of Ka are Molar
FYI => Adding a strong base to a buffer solution will shift pH to more basic.
Adding a strong acid to a buffer solution will shift pH to more acidic.
=> (such is a good way to check that your buffer calculations are correct.)
NOTE => Question asks for moles of HOAc, Na⁺OAc⁻ & NaOH after adding base. Giving answers in terms of Molarity (moles/Liter) is same as moles. Therefore ...
[HOAc] = 0.1108M
[NaOAc] = 0.1592M
[NaOH] = ∅M (from rxn of H⁺ + OH⁻ => H₂O, all NaOH was consumed in acid/base reaction. Remaining are only Na⁺ as a spectator ion and OH⁻ as a function of the new concentration of H⁺ => [OH⁻] = Kw/[H⁺] = 1 x 10⁻¹⁴/1.22 x 10⁻⁵ = 8.2 x 10⁻¹⁰M.
Hope this helps. :-)
Are based on the intrinsic properties of the chemical
Answer:
In materials science, an intrinsic property is independent of how much of a material is present and is independent of the form of the material, e.g., one large piece or a collection of small particles. Intrinsic properties are dependent mainly on the fundamental chemical composition and structure of the material.
Explanation:
mark as brainliest
Human blood contains a buffer of carbonic acid (H_2 CO_3) and bicarbonate anion (HC〖O_3〗^-) in order to maintain blood pH between 7.35 and 7.45, as a value higher than 7.8 or lower than 6.8 can lead to death. In this buffer, hydronium and bicarbonate anion are in equilibrium with carbonic acid. Furthermore, the carbonic acid in the first equilibrium can decompose into CO_2 gas and water, resulting in a second equilibrium system between carbonic acid and water. Because CO_2 is an important component of the blood buffer, its regulation in the body, as well as that of O_2 , is extremely important. The effect of this can be important when the human body is subjected to strenuous condition.
Carbonic acid buffer:
H_2 CO_3 (aq)+ H_2 O(l) ↔H_3 O^+ (aq)+HC〖O_3〗^- (aq)
1. Write the equilibrium constant expression K_c for the carbonic acid buffer in the blood.
Kc = [H3O+][HCO3-] / [H2CO3]
Remember that Kc is products over reactants. Also, you do not include liquid water in a Kc expression, since liquid water has no concentration.
What would a curve with the shape of an isoceles triangle indicate?
The melting of ice is considered a/an _______ because the ice absorbs heat from the surroundings.
Question 3 options:
A)
chemical reaction
B)
thermochemical process
C)
exothermic process
D)
endothermic process
Answer:
the correct answer is D
Explanation:
Basically, melting ice is an endothermic reaction because the ice absorbs (heat) energy, which causes a change to occur.
what is reduction potential?
Answer:
A reduction potential measures the tendency of a molecule to be reduced by taking up new electrons. ... Standard reduction potentials can be useful in determining the directionality of a reaction. The reduction potential of a given species can be considered to be the negative of the oxidation potential.
Explanation:
What is standard pressure in atmospheres?
a.10
b.1
c.5
d.2
The gas phase decomposition of hydrogen peroxide at 400 °C
H2O2(g)H2O(g) + ½ O2(g)
is second order in H2O2 with a rate constant of 0.650 M-1 s-1.
If the initial concentration of H2O2 is 8.00×10-2 M, the concentration of H2O2 will be 1.70×10-2 M after
seconds have passed.
Answer:
t = 71.3 s
Explanation:
Hello there!
In this case, since the second-order integrated law is given by the following equation:
[tex]\frac{1}{[H_2O_2]} =\frac{1}{[H_2O_2]_0}+kt[/tex]
Thus, given the initial and final concentration of hydrogen peroxide and the rate constant, we obtain the following time:
[tex]\frac{1}{[0.0170M]}-\frac{1}{0.0800M}=0.650M^{-1}s^{-1}t\\\\t=\frac{46.32M^{-1}}{0.650M^{-1}s^{-1}} \\\\t=71.3s[/tex]
Best regards!
Which ones are soluble in water and which ones are not soluble in water.
a. NH4CH3COO Ammonium acetate soluble
b. Ba(OH)2 Barium hydroxide soluble
c. FeCO3 Iron (II) Carbonate insoluble
d. NaOH Sodium hydroxide soluble
e. RbNO3 Rubidium nitrate soluble
Answer:
d. NaOH Sodium hydroxide soluble
make a chart to show the effect of Sodium Hydroxide and Sulphuric acid on methyl orange and red litmus paper
Answer:
mark me as brainliest plsss
Hence in the Sodium hydroxide, methyl orange will turn into yellow color and in Sulfuric acid shows red color. Red litmus will turn into blue color in the Sodium hydroxide solution.
What is litmus paper?Litmus paper is a paper which is used to identify the acidity or basicity of any solution.
Sulfuric acid is acidic in nature, and red litmus paper shows no effect in this acid as red paper change into blue in the presence of base. Methyl orange is an indicator and it shows red color in the acidic medium.Sodium hydroxide is basic in nature and red litmus paper will change into blue in this solution and color of methyl orange changes from red to yellow in the basic solution.Hence, the effect of red litmus & methyl orange is explained above.
To know more about litmus paper, visit the below link:
https://brainly.com/question/1287856