Answer:
336.6 grams of CO₂ and 183.6 grams of H₂O are formed from 2.55 moles of propane.
Explanation:
In this case, the balanced reaction is:
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of reactant and product participate in the reaction:
C₃H₈: 1 moleO₂: 5 molesCO₂: 3 molesH₂O: 4 molesBeing the molar mass of each compound:
C₃H₈: 44 g/moleO₂: 16 g/moleCO₂: 44 g/moleH₂O: 18 g/moleThen, by stoichiometry, the following quantities of mass participate in the reaction:
C₃H₈: 1 mole* 44 g/mole= 44 gramsO₂: 5 moles* 16 g/mole= 80 gramsCO₂: 3 moles* 44 g/mole= 132 gramsH₂O: 4 moles* 18 g/mole= 72 gramsSo you can apply the following rules of three:
If by stoichiometry 1 mole of C₃H₈ forms 132 grams of CO₂, 2.55 moles of C₃H₈ how much mass of CO₂ will it form?[tex]mass of CO_{2} =\frac{2.55 moles of C_{3} H_{8}*132 gramsof CO_{2} }{ 1 mole of C_{3} H_{8}}[/tex]
mass of CO₂= 336.6 grams
If by stoichiometry 1 mole of C₃H₈ forms 72 grams of H₂O, 2.55 moles of C₃H₈ how much mass of H₂O will it form?[tex]mass of H_{2}O =\frac{2.55 moles of C_{3} H_{8}*72 gramsof H_{2}O }{ 1 mole of C_{3} H_{8}}[/tex]
mass of H₂O= 183.6 grams
336.6 grams of CO₂ and 183.6 grams of H₂O are formed from 2.55 moles of propane.
A solid sample of Zinc Hydroxide is added to 0.350 L of 0.500 M aqueous Hydrogen Bromide. The solution that remains is still acidic. It is then titrated with 0.500 M NaOH solution, and it takes 88.5 mL of the NaOH solution to reach the equivalence point. What mass of Zinc Hydroxide was added to the Hydrogen Bromide solution?
Answer:
6.499 g
Explanation:
One part of the aqueous HBr reacted with Zinc Hydroxide following the reaction:
Zn(OH)₂ + 2HBr → ZnBr₂ + 2H₂OAnd the remaining HBr reacted with NaOH:
NaOH + HBr → NaBr + H₂OFirst we calculate how many HBr moles remained after reacting with Zn(OH)₂. That number equals the number of NaOH moles used in the titration:
0.500 M * 88.5 mL = 44.25 mmol NaOH = mmol HBrNow we calculate how many moles of HBr reacted with Zn(OH)₂:
Originally there were (350 mL * 0.500 M) 175 mmol HBr175 mmol - 44.25 mmol = 130.75 mmol HBrThen we convert those 130.75 mmoles of HBr to the Zn(OH)₂ moles they reacted with:
130.75 mmol HBr * [tex]\frac{1mmolZn(OH)_{2}}{2mmolHBr}[/tex] = 65.375 mmol Zn(OH)₂.Finally we convert Zn(OH)₂ moles to grams:
65.375 mmol Zn(OH)₂ * 99.424 mg/mmol = 6499.8 mg Zn(OH)₂6499.8 mg Zn(OH)₂ / 1000 = 6.499 gWhich of the following Noble Gases has only 2 valence electrons because it only has 1 energy level?
Helium (He)
Neon (Ne)
Argon (Ar)
Krypton (Kr)
Answer:
it is he
Explanation:
beacuse Noble gases have 2 volence
How does the appearance of a substance change when it
changes phase?
Answer:
Melting: the substance changes back from the solid to the liquid. Condensation: the substance changes from a gas to a liquid. Vaporization: the substance changes from a liquid to a gas. Sublimation: the substance changes directly from a solid to a gas without going through the liquid phase.
Explanation:
The change in appearance of a substance when it changes its phase includes :
Change in volume Change in texture and Change in shapeChange in volume : when a liquid substance is heated to its boiling point ( vaporization) the volume of the liquid substance will change when it turns into gas because gases have no definite volume or shape.
Change in Texture: When water freezes it changes its state from a liquid state to a solid state, also the appearance of the liquid water will undergo changes in its texture when it is in its' solid state ( i.e. the texture of ice is not exactly the texture of liquid water )
Change in shape : when a solid substance changes its state from solid to gas ( sublimation ) the shape of the solid substance will be lost during the phase change.
Hence we can conclude that the change in the appearance of a substance when it changes its phase include. Change in volume, Change in texture and Change in shape.
Learn more : https://brainly.com/question/16785581
If 1 teaspoons of vinegar are equivalent in 60 drops. How many drops of vinegar are there in
1 ½ teaspoons?
Answer:
90 drops
Explanation:
1 teaspoon = 60 drops
Half a teaspoon = 60 ÷ 2 = 30 drops
1 and a half = 60 + 30 = 90
Police investigating the scene of a sexual assault recover a large blanket that they believe may contain useful physical evidence. They take it to the laboratory of forensic serologist Scott Alden, asking him to test it for the presence of semen. Noticing faint pink stains on the blanket, Scott asks the investigating detective if he is aware of anything that might recently have been spilled on the blanket. The detective reports that an overturned bowl of grapes and watermelon was found at the scene, as well as a broken glass that had contained wine. After the detective departs, Scott chooses and administers what he considers the best test for analysing the piece of evidence in his possession. Three minutes after completion of the test, the blanket shows a positive reaction. What test did Scott choose, and what was his conclusion? Explain your answer.
Answer:
Acid Phosphatase (AP) Test
Explanation:
Acid phosphate is an enzyme that is found in the body. It is secreted majorly by the prostrate gland into the seminal fluid. The acid phosphatase test is used to test for the presence of semen in items.
Scott chose the acid phosphatase test because it is very useful in testing for semen on large items such as blankets. The reaction time for an acid phosphatase test for semen is less than 30 seconds. Seeing that the test was completed in three minutes, Scott concluded that the positive reaction was as a result of some other fluid.
The detectives reported that an overturned bowl of grapes and watermelon was found at the scene as well as a broken glass that had contained wine. Scott knew that some fruit juices like that of watermelon give a positive reaction to the acid phosphatase test but with more time that of the semen fluid because the reaction is a very slow one.
Scott concluded that there was no presence of semen on the blanket and therefore there was no sexual assault.
Pedro created the following table for his observations on balanced and unbalanced forces. He forgot to record some of the information. Which two measurements correctly complete the table?
A. 50 N in row one and 100 N in row two
B. 100 N in row one and 30 N in row two
C. 100 N in row one and 60 N in row two
D. 90 N in row one and 50 N in row two
Answer:
Option B. 100 N in row one and 30 N in row two
Explanation:
To know the the correct answer to the question, do the following:
For Row 1:
Force to the right (Fᵣ) = 100 N
Net force (Fₙ) = 0 (since it is balanced)
Force to the left (Fₗ) =?
Fₙ = Fᵣ – Fₗ
0 = 100 – Fₗ
Collect like terms
0 – 100 = – Fₗ
– 100 = – Fₗ
Multiply through by –1
Fₗ = 100 N
For Row 2:
For the net force to be unbalanced, it means that one of the force is greater or lesser than the other.
In the question given above, the force to the left is given as 50 N and it show it is greater than the force to be right. The other force must be lesser than 50 N to result in unbalanced force according to the illustration from the question.
From the options given above, option B has a lesser force (i.e 30 N) for row 2 compared to option C which has a greater force (60 N) for row 2.
Therefore, option B gives the correct answer to the question.
Don’t skip please!!! I need help
Given
Atomic symbol
Required
Atomic composition
Solution
Atomic number = number of protons = number of electrons
Mass Number (A) is the sum of protons and neutrons
Number of protons and Number of Neutrons in nucleus
Number of electrons in the shell
From the picture:
protons = 3
neutrons = 4
electrons = 3
atomic number = protons = electrons = 3
mass number = protons + neutrons = 3+4 = 7
Vinegar is sold as % acidity which means a weight/volume or w/v% calculation. The density of acetic acid is 1.05 g/ml and water is (effectively) 1.0 g/ml. Recollect (from CHMY121) the %w/v refers to a solution with a certain mass of additive made up to 100 mL with the addition of (in this case) water; or gramsofsolute100mLsolution The molar mass of Acetic Acid is 60.052 g/mol. What is the molarity of CH3COOH in water of a 5% acidity vinegar solution
Answer:
0.83M is molarity of the solution
Explanation:
In a 5% w/v solution of vinegar there are 5g of acetic acid per 100mL of solution. Or 50g per liter of solution. As molarity is defined as the moles of the solute (Acetic acid) per liter of solution we need to convert the 50g per liter to moles per liter using molar mass of acetic acid:
Molarity:
50g/L * (1mol / 60.052g) = 0.8326moles/L =
0.83M is molarity of the solutioncompute the mass-specific enthalpy change associated with Nz that is undergoing a change in state from 400 k to 800 k
Answer:
The correct answer is "430 kJ/kg". A further explanation is given below.
Explanation:
The given values are:
T₁ = 400 k
T₂ = 800 k
The average temperature will be:
= [tex]\frac{T_1+T_2}{2}[/tex]
= [tex]\frac{400+800}{2}[/tex]
= [tex]600 \ k[/tex]
From table,
At 600 k the [tex]C p[/tex] will be = 1.075
Now,
⇒ The specific enthalpy = [tex]Cp(T_2-T_1)[/tex]
⇒ [tex]\Delta h=1.075 (800-700)[/tex]
⇒ [tex]=430 \ kJ/kg[/tex]
Examine the diagram of the cell cycle.
Which label identifies the stage in which the DNA is copied and the cell grows?
A-W
B-X
C-Y
D-Z
Explanation:
i think w is the required answer
Would you consider an aquifer a renewable resource? Why or why not?
Answer:
an aquifer is a renewable resource
Explanation:
Aquifers are defined as the groundwater found deep in the layers of rocks.
An aquifer is considered as a renewable resource because groundwater is renewed over time. Aquifers are water resources and follow hydrological cycle through which it can renew itself.
Some of the deep aquifers are considered as nonrenewable resource because it toll hundreds of years to accumulate.
Hence, the correct answer is yes an aquifer is a renewable resource except some deep aquifers.
Give the formula of the alkanes his molecule contains 28 hydrogen atoms
Answer:
jayfeather friend me
Explanation:
Table 1. Summary of the Straight-Chain Alkanes
Name Formula Number of Structural Isomers
Octadecane C18H38
Nonadecane C19H40
Eicosane C20H42 366,319 (!)
29 more rows
The formula of the alkanes the molecule contains 28 hydrogen atoms is [tex]C_1_3H_2_8[/tex], i.e., tridecane.
What are alkanes?Alkanes are organic compounds made up entirely of single-bonded carbon and hydrogen atoms with no other functional groups.
Alkanes have the general formula CnH2n+2 and are classified into three types: linear straight-chain alkanes, branched alkanes, and cycloalkanes.
Alkanes are important raw materials in the chemical industry and the main component of gasoline and lubricants.
Natural gas is primarily composed of methane and ethane and is used for heating, cooking, and power generation (gas turbines).
Natural gas and petroleum are separated from the alkanes. Natural gas is primarily composed of methane, with trace amounts of other low molecular weight alkanes.
All other alkanes are derived from petroleum, which is a complex mixture of many compounds.
Here, the formula for 28 hydrogen atom containing alkane is
[tex]C_1_3H_2_8[/tex]
Thus, this given formula is of tridecane.
For more details regarding alkanes, visit:
https://brainly.com/question/4260635
#SPJ2
Why is one side of the moon called "the dark side of the moon"?
Answer:
Option C
Explanation:
The answer is option C or "The amount of time it takes to rotate around it's axis is the same amount of time it takes to revolve around Earth."Remember that the Earth and the Moons amount of time to make a full rotation is almost in sync and they're two sides of the moon, one side we do not see and that's because that side is currently faced away from the Earth which is called the dark side of the moon. Each side has two weeks oh night, and two weeks of day because of how long it takes the moon to revolve, so while we have a side towards the Earth which is illuminated by the sun we have another pointing away in the dark.
Hope this helps.
How does latitude affect water temperature? Choose ALL that apply Lesson 2.05 none of the choices Temperatures are greatest at low altitudes because of the proximity to the equator As you move to higher latitudes approaching the poles, the temperature decreases. Temperatures are lowest at low altitudes because of the proximity to the equator
Answer:
I think it's option 3 (From top to bottom)
Explanation:
When the water is at a higher altitude there's only about 40 percent heat that the equator does.
Will give brainliest to correct answer of this picture:
Answer:
option C : cellular respiration
Explanation:
cellular respiration is taking place in this diagram .
as in respiration food get oxidised to release energy and it releases CO2 and water
what are three things that are considered a chemical change
Answer:
Color change, precipitation, bubbling
Explanation:
Chemical change changes the chemical composition and undergoes a process in which it results as a new substance.
Define
wheel and axel
Answer:
A wheel and axle is a simple lifting machine that consists if rope that unwind a wheel onto a cylindrical drum/ shaft to provide mechanical advantage.
wheel and axle is a simple machine having two co-axial cylinder of different radii fitted to a common axies.
A student reacts 13 moles of iron with 21 moles of oxygen according to the following equation:
4Fe(s) + 3O2(g) +2Fe2O3(s)
How many moles of iron(III) oxide will the reaction produce?
a
34 moles
b
13 moles
c
6.5 moles
d
44 moles
Answer:
Explanation:
C
The limiting reactant in this reaction is Fe. 4 moles of Fe gives 2 moles of ferric oxide. Hence, 13 moles of Fe will give 6.5 moles of iron (iii)oxide.
What is limiting reactant ?The reactant which is not sufficient in amount determines the yield of the reaction and it is called the limiting reactant of the reaction.
In the given reaction, 4 moles of iron reacts with 3 moles of oxygen to give 2 moles of iron oxide.
given , no.of moles of oxygen gas present in the sample = 21 moles
no.of moles of Fe = 13 moles.
Here, 28 moles of Fe is needed to react with 21 moles of oxygen. Hence, Fe is the limiting reactant.
4 moles of Fe gives 2 moles of iron (III)oxide. Hence, number of moles of the product , formed from 13 moles of Fe is calculated as follows:
(13 moles ×2 moles)/4moles = 6.5m moles
Therefore, 6.5 moles of iron (III)oxide is formed from 13 moles of Fe.
Find more on limiting reactant :
https://brainly.com/question/2948214
#SPJ6
Which types of energy transformations does a television make?
Electrical energy to energy of motion and heat energy
Electrical energy to heat energy and light energy
Electrical energy to sound energy and energy of motion
Electrical energy to sound energy and light energy
Answer:
d.
Explanation:
the electricity is why we can hear sounds from the television and see it
List 5 things that were made possible because of the use of microscope
Answer:
the invention of the microscope has made seeing bacteria/cells, examining forensic evidence (such as fingerprints), studying atomic structure, tissue analysis, and the study of our ecosystem possible to the naked eye
Explanation:
hope this helps
What is the answer for number 9 in the Half-life gizmo activity B.
A gas stream contains 18.0 mole% hexane and the remainder nitrogen. The stream flows to a condenser, where its temperature is reduced and some of the hexane is liquefied. The hexane mole fraction in the gas stream leaving the condenser is 0.0500. Liquid hexane condensate is recovered at a rate of 1.50 L/min. N2 C6H14(v) (5.00 mole%) N2 C6H14(v) (18.0 mole%) Liquid condensate 1.50 L C6H14 (l)/min CONDENSER (a) What is the flow rate of the gas stream leaving the condenser in mol/min
Answer:
the flow rate of the gas stream leaving the condenser is 71.9 moles/min
Explanation:
Given the data in the question and the figure below;
N2 BALANCE
(100% - 18%) × ( mole rate in ) = ( 100% - 5%) × ( mole rate out)
0.82 × ( mole rate in ) = 0.95 × ( mole rate out)
mole rate in = 0.95 × ( mole rate out) / 0.82
mole rate in = 1.1585365853 × ( mole rate out)
now;
HEXANE BALANCE
0.18 × ( mole rate in ) = 0.0500 × ( mole rate out) + condensate --- equ 1
but condensate = 1.5 L/min × ( density of hexane ) × 1/molar mass of hexane
we know that;
density of hexane is 0.6548 g/mL
and molar mass of hexane is 86.18 g/mol
so,
condensate = 1.5 L/min × ( 0.6548 g/mL × 1000 mL/L ) × ( 1/86.18 g/mol)
condensate = 11.3970758876
now lets substitute into equation 1
0.18 × ( mole rate in ) = 0.0500 × ( mole rate out) + condensate
⇒ 0.18 × ( 1.1585365853 × ( mole rate out) ) = 0.0500 × ( mole rate out) + 11.3970758876
⇒ 0.208536585354(mole rate out) = 0.0500( mole rate out) + 11.3970758876
⇒ 0.208536585354(mole rate out) - 0.0500( mole rate out) = 11.3970758876
⇒ 0.158536585354(mole rate out) = 11.3970758876
mole rate out = 11.3970758876 / 0.158536585354
mole rate out = 71.889247 ≈ 71.9 moles/min
Therefore, the flow rate of the gas stream leaving the condenser is 71.9 moles/min
what are the three important properties of acids
Pure acetic acid is often called glacial acetic acid because it is purified by fractional freezing at its melting point of 16.6 °C. At 1 atm, a flask containing several moles of acetic acid at 16.6 °C is briefly lowered into an infinitely large ice-water bath. When it is removed it is found that exactly 1 mol of acetic acid has frozen. Given: ΔH_fusion,acetic acid = 11.45kJ/mol and ΔH_fusion, H2O= 6.01 kJ/mol.
Required:
a. What is the change in entropy of the acetic acid?
b. What is the change in entropy of the water bath?
c. Now consider that the water bath and acetic acid are the same system. What is the entropy change for the combined system? Is the process reversible or irreversible? Why?
Answer:
Explanation:
a ) ΔH_fusion of acetic acid is 11.45 kJ / mol . It means 11.45 kJ of heat will be released when 1 mole of acetic acid will freeze . During this process temperature of acetic acid will be constant .
Temperature of acetic acid T = 16.6⁰C = 273 + 16.6 K = 289.6 K .
By definition change in entropy
ΔS = dQ / T
= dH / T
As temperature remains constant during withdrawal of heat
ΔS = ΔH / T
T = 289.6 K .
ΔH = - 11.45kJ
ΔS = - 11.45kJ / 289.6
= - 11450 / 289.6
= - 39.53 J
It will be negative as heat is released by acetic acid .
b )
Heat amounting ΔH will be absorbed by water bath so its entropy will be increased . As water bath is very large , temperature of bath also will remain constant at 289.6 K .
Increase in entropy of water bath =
ΔS = ΔH / T
T = 289.6 K .
ΔH = 11.45kJ
ΔS = 11.45kJ / 289.6
= 11450 / 289.6
= 39.53 J
c )
consider that the water bath and acetic acid are the same system : --
Total change in the heat content of the system
= 289.6 - 289.6 = 0
So for the whole system
ΔQ =ΔH = 0
Change in entropy is zero .
Δ G = ΔH - TΔS
= ΔH - ΔH = 0
ΔG = 0
Change in entropy is zero .
What is a common effect of warm ocean currents on nearby coastlines?
A. Low wind speeds
B. Lower temperatures
C. Changing wind directions
D. Increased clouds and precipitation
What is the mass of 2.90 L of O2 gas at STP
Answer:
4.16 g
Explanation:
Volume, V = 2.90 L
STP mans standard temperature and pressure
T = 273 K
P = 1 atm
Mass = ?
Using the ideal gas equation;
PV = nRT
where R = General gas constant = 0.082 L atm mol-1 K-1
n = PV / RT
n = 1 * 2.90 / (0.082 * 273)
n = 2.90 / 22.386
n = 0.130 mol
The relationship between moles and mass;
Mass = number of moles * Molar mass
Mass = 0.130 mol * 32 g/mol
Mass = 4.16 g
Answer:4.14
Explanation:just answered the question
What are the differences between proton, neutron, and electron
Sound waves are longitudinal, mechanical, compression waves.
A. True
B. False
Answer:
True
Explanation:
Sound waves traveling through air are indeed longitudinal waves with compressions and rarefactions. As sound passes through air (or any fluid medium), the particles of air do not vibrate in a transverse manner.
Answer:
true
Explanation:
ape x
There is a third bromobutene structure that could have been formed in the addition of HBr to butadiene: cis-1-bromor-2-butene (the cis isomer of structure 2). Draw this structure. Would you predict (no calculation) its heat of formation to be more or less negative that the trans isomer? Explain.
Answer:
its less negative hope I helped buster
Because trans isomers are more stable than cis isomers, the cis isomer will have a less negative heat of formation than the trans isomer.
What are cis- and trans- isomers?Cis- and trans isomers are compounds that have different configurations in space because of the presence of a rigid structure or functional groups in their molecule.
Cis atoms have functional groups on the same side.
Trans isomers have functional groups on alternate different.
The structure of cis-1-bromor-2-butene is attached.
Generally, trans isomers are more stable than cis isomers..
Stable compounds have more negative heat of formation while unstable compounds have less negative heat of formation.
Therefore, the cis isomer will have a less negative heat of formation than the trans isomer.
Learn more about cis and trans isomers at: https://brainly.com/question/4625349
Calculate the pH of a solution that is prepared by dissolving 0.23 mol of hydrofluoric acid (HF) and 0.57 mol of hypochlorous acid (HClO) in water and diluting to 3.60 L. Also, calculate the equilibrium concentrations of HF, F2, HClO, and ClO2. (Hint: The pH will be determined by the stronger acid of this pair.)
Answer:
The equilibrium concentrations of HF = 0.058 , F2 = 0.006M , HClO =0.16M , and ClO2 = 7.7 × 10⁻⁷M.
Explanation:
The Ka values for HClO₃ and HF are given as 2.9 × 10⁻⁸ and 6.6 × 10⁻⁴ respectively. The molar concentration for HF = 0.23/ 3.60L = 0.064 M and 0.57/ 3.60 = 0.16 M.
When HF is reacted with water, it ionizes to form H₃O⁺ and F⁻. The concentration of H₃O⁺ and F⁻ can be calculated below:
HF(aq) <------------------------> H30^+ + F^-.
Ka = [H^+] [F^-]/[HF] .
6.6× 10^-4 = [x][x]/ ( 0.064- x).
x = 0.0060 M.
The concentration of H₃O⁺ and F⁻ = 0.0060 M respectively.
The pH = - log [ H₃O⁺ ] = -log [0.0060] = 2.22.
When HClO is reacted with water, it ionizes to form H₃O⁺ and F⁻. The concentration of H₃O⁺ and ClO⁻ can be calculated below:
HClO(aq) <------------------------> H30^+ + ClO^-.
Ka = [H^+] [ClO^-]/[HClO] .
6.6× 10^-4 = [0.006 + x] [x]/ ( 0.16 - x).
x = 7.7 × 10^-7M.
[ClO^-] = 7.7 × 10^-7 M.
[HClO] = 0.16 - 7.7 × 10^-7 = 0.16M.
[F^-] = 0.006 M.
[HF] = 0.064 - 0.006 = 0.058 M.