What is the velocity of a ball that is thrown in the air 16 meters? The ball reaches the ground in 25 seconds

v = d/t

please be quick ​

Answer:

96.3%

Explanation:

Efficiency = Work input/Work output * 100%

Work done = Force * distance\

Work done by the engine is the work output = 700 * 0.55

Work output = 423.5Nm

Work done by you is the work input = 35.7*11.43

Work input = 408.051Nm

Efficiency = 408.051/423.5 * 100

Efficiency = 0.963 * 100

Efficiency = 96.3%

Hence the efficiency of the pulley system is 96.3%

Answer:

Position.

Explanation:

Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.

This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.

Mathematically, the motion of an object is described in terms of acceleration, time, distance, speed, velocity, displacement, position, etc.

A reference point refers to a location or physical object from which the motion (movement) of another physical object or body can be determined.

For example, a point on a map is considered to be a reference point because it represents the starting point of an object or person in motion.

Hence, a reference point allows you to determine the position an object.

Answer:

The shadow would be on your left side.

Explanation:Give brainliest if this helped :)

Answer:

30 kg·[tex]\frac{m}{s}[/tex]

Explanation:

Impulse is equal to the average force multiplied by the elapsed time, or

J=[tex]F_{av}[/tex]Δt

Your average force [tex]F_{av}[/tex] is 50 newtons because it was a constant force. Your elapsed time Δt was 0.6 seconds.

Multiply these values and you get an impulse of 30 kg·[tex]\frac{m}{s}[/tex]

Answer:

500000 approx........

...

Answer:

b

Explanation:

in this condition the atom is not stable so in order to become stable ( trying to have the last energy level completely filled like the Nobel gases) it tends to lose or gain or share the electrons and that debend on its condition . I hope that's the right answer

Answer:

the 750 j will have potential energy is 375

Explanation:

750/2 is 375

Answer:

RT = 35 Ohms

Explanation:

Let the three resistors be R1, R2 and R3 respectively.

Given the following data;

R1 = 14 Ohms

R2 = 12 Ohms

R3 = 9 Ohms

To find the total resistance, RT;

Since all the resistors are connected in series, the total resistance is equal to the sum of all three resistance of the resistors.

RT = R1 + R2 + R3

Substituting into the equation, we have

RT = 14 + 12 + 9

RT = 35 Ohms.

Therefore, the total resistance of the circuit is 35 Ohms.

Answer:

P = 928.09 Pa

Explanation:

Given that,

Mass of a gas cylinder, m = 90 kg

The diameter of the cylinder, d = 1.1 m

Radius, r = 0.55 m

We need to find the ground pressure. The pressure is equal to force per unit area. So,

[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]

So, the ground pressure is 928.09 Pa.

Answer:

the first one is D

Explanation:

so if the others u put are right the the second would be c

Answer:

hello

Explanation:

Answer:

Adiabatic

Explanation:

Adiabatic is defined as a process in which no heat transfer takes place.

Answer:

2.65

Explanation:

Its simple just find the newtons

Answer:

displacement = 100 - 75 = 25 km east

Answer:

Why sex cells only need half the number of chromosomes compared to other cells in the body?  As gametes are produced, the number of chromosomes must be reduced by half. Why? The zygote must contain genetic information from the mother and from the father, so the gametes must contain half of the chromosomes found in normal body cells.

Explanation:

Brainliest Plzz

Answer:

During Mitosis, the chromosomes split at G2 Phase.

The thermal energy needed to melt 1.25 kg of water at its melting point is 416.25 kJ.

The latent heat of fusion is the amount of thermal energy required to change the phase of a substance from a solid to a liquid state without a change in temperature.

When a substance is in a solid state, the molecules are packed closely together and are held in a rigid structure by intermolecular forces. As heat is added to the solid, the temperature of the substance increases until it reaches the melting point, which is the temperature at which the solid starts to change into a liquid.

At the melting point, the added thermal energy is used to break the intermolecular bonds that hold the molecules in the solid structure. The energy absorbed during this process causes the molecules to become less ordered and to move more freely, resulting in a liquid state. However, during the melting process, the temperature of the substance remains constant until all of the solid has melted.

The latent heat of fusion is a property of the substance and is defined as the amount of energy required per unit mass to change the phase from solid to liquid. It is usually measured in units of joules per kilogram (J/kg) or kilojoules per kilogram (kJ/kg).

The latent heat of fusion is an important concept in thermodynamics and is used in many applications, such as the melting of ice, the solidification of molten metals, and the formation of igneous rocks.

Here in the Question,

To calculate the thermal energy needed to melt 1.25 kg of water at its melting point, we can use the formula:

Q = mass x latent heat of fusion

where Q is the thermal energy required, and the latent heat of fusion is the amount of energy required to change the phase of a substance from solid to liquid without changing its temperature.

Substituting the given values, we get:

Q = 1.25 kg x 333 kJ/kg

Q = 416.25 kJ

Therefore, 1.25 kilogram of water requires 416.25 kJ of thermal energy to melt at its melting point.

To learn more about specific heat click:

brainly.com/question/31608647

#SPJ7

Answer:

D: All

Explanation:

In cats, noise pollution causes what is known as acoustic stress in them.

In birds, noise pollution delays their nesting because it makes their songs which they use to probe to be at a low frequency.

Noise pollution affects humans because it can lead to loss of hearing, sleep disturbance, stress, high blood pressure e.t.c

Therefore, it affects Cats, birds and humans.

So option D is correct.

Answer:

Car A has twice the energy of car B.

Explanation:

The kinetic energy of an object is given by :

[tex]K=\dfrac{1}{2}mv^2[/tex]

Where

m is the mass

v is the speed of the object

Car A has twice the mass of Car B. Both travel at the same speed i.e.

[tex]m_A=2m_B[/tex]

So,

[tex]\dfrac{K_A}{K_B}=\dfrac{(1/2)m_Av^2}{(1/2)m_Bv^2}\\\\=\dfrac{2m_B}{m_B}\\\\\dfrac{K_A}{K_B}=2\\\\K_A=2\times K_B[/tex]

So, the kinetic energy of car A is twice of the kinetic energy of car B.

Answer:

Car A has twice the energy

Explanation:

Answer:

I think its distance

Explanation:

when measuring how far a p.o art u can use mm

Answer:

The correct answer is - puberty.

Explanation:

Sebaceous glands are the exocrine glands present in mammals that are microscopic glands, produce an oily substance, Sebum, lubricates the skin and hair follicles.

Activation of these glands is triggered twice in the developmental stage or phase, neonatal (0 to three months from birth) but the major activation of these glands when puberty hits an individual. It produces 500 percent of its normal production during the puberty phase.

Answer:

Resistance of resistor A = 6.0 Ω and resistance of resistor B = 3.0 Ω

Explanation:

When the two resistors are in series, let V₁ = voltage in resistor A and R₁ = resistance of resistor A and V₂ = voltage in resistor B and R₂ = resistance of resistor B.

Given that V₁ + V₂ = 6.0 V and V₁ = 4.0 V,

V₂ = 6.0 V - V₁ = 6.0 V - 4.0 V = 2.0 V

Also, let the current in series be I.

So, V₁ = IR₁ and V₂ = IR₂

I = V₁/R₁ and I = V₂/R₂

equating both expressions, we have

V₁/R₁ = V₂/R₂

4.0 V/R₁ = 2.0 V/R₂

dividing through by 2.0 V, we have

2/R₁ = 1/R₂

taking the reciprocal, we have

R₂ = R₁/2

R₁ = 2R₂

From the parallel connection, let V₁ = voltage in resistor A and R₁ = resistance of resistor A and V₂ = voltage in resistor B and R₂ = resistance of resistor B. Since it is parallel, V₁ = V₂ = V = 6.0 V

Also, V₂ = I₂R₂ where I₂ = current in resistor B = 2.0 A and R₂ = resistance of resistor B

So, R₂ = V₂/I₂

= 6.0 V/2.0 A

= 3.0 Ω

R₁ = 2R₂

= 2(3.0 Ω)

= 6.0 Ω

So, resistance of resistor A = 6.0 Ω and resistance of resistor B = 3.0 Ω

The resistance of A is 6Ω while for B is 3Ω.

Potential difference is the amount of work done in moving a unit charge from one point to another.

When the two resistors are connected in parallel across the 6.0 V battery, the current in B is found to be 2.0 A, hence:

2 * Rb = 6 V

Rb = 3Ω

For the series connection:

I * 3 = (6 - 4)

I = 2/3 A

Hence:

(2/3) * Ra = 4

Ra = 6Ω

The resistance of A is 6Ω while for B is 3Ω.

Find out more on potential difference at: https://brainly.com/question/14306881

Answer:

Water vapor

Explanation:

Water Vapor has the highest temperature, due to its being in a gas state, and gases usually have very high temperatures, for example steam when you boil pasta.

Hope this helps you! Have a nice day!

Answer:

[tex]R = 1.5* 10^{-10}m[/tex]

Explanation:

Given

[tex]r = 2.5 * 10^{-11}m[/tex] -- radius of hydrogen atom

See attachment

Required

Determine the radius of magnesium atom (R)

From the attachment, the ratio of a hydrogen atom to a magnesium atom is:

[tex]Ratio = 6mm : 36mm[/tex]

Simplify

[tex]Ratio =1 : 6[/tex]

Represent the radius as ratio:

[tex]Ratio = r : R[/tex]

Substitute [tex]r = 2.5 * 10^{-11}m[/tex]

[tex]Ratio = 2.5 * 10^{-11}m : R[/tex]

Equate both ratios

[tex]2.5 * 10^{-11}m : R = 1 : 6[/tex]

Express as fraction

[tex]\frac{2.5 * 10^{-11}m}{R} = \frac{1}{6}[/tex]

Cross Multiply

[tex]R * 1 = 2.5 * 10^{-11}m * 6[/tex]

[tex]R * 1 = 2.5 * 6* 10^{-11}m[/tex]

[tex]R * 1 = 15* 10^{-11}m[/tex]

[tex]R = 15* 10^{-11}m[/tex]

[tex]R = 1.5*10* 10^{-11}m[/tex]

[tex]R = 1.5* 10^{1-11}m[/tex]

[tex]R = 1.5* 10^{-10}m[/tex]

Hence, the radius of the magnesium atom is: [tex]1.5* 10^{-10}m[/tex]

Answer:

Object's final momentum = 16.7 kg-m/s

Explanation:

Given that,

Impulse, J = 12.2 kg-m/s

Initial momentum, [tex]P_i=4.5\ kg-m/s[/tex]

We need to find the object's final momentum. We know that the impulse is equal to the change in momentum. So,

Impulse = change in momentum

[tex]J=P_f-P_i\\\\P_f=J+P_i\\\\P_f=12.2+4.5\\\\P_f=16.7\ kg-m/s[/tex]

So, the object's final momentum is 16.7 kg-m/s.

Given:

We know the relation,

→ [tex]Impulse = Change \ in \ momentum[/tex]

or,

→ [tex]J = P_f-P_i[/tex]

then,

→ [tex]P_f = J+P_i[/tex]

By substituting the values,

        [tex]= 12.2+4.5[/tex]

        [tex]= 16.7 \ kg-m/s[/tex]

Thus the above answer is right.      

Learn more about momentum here:

https://brainly.com/question/18551770

the answer is "all organisms evolve at the same rate" :)

Answer:

answer is b

Explanation:

Answer:

Vector has magnitude and direction, scalar only has magnitude.

Answer:

A quantity that has magnitude but no particular direction is described as scalar. A quantity that has magnitude and acts in a particular direction is described as vector

Answer:

  2 m/s

Explanation:

The crest of the wave moves 8 meters in 4 seconds, so its speed is ...

  (8 m)/(4 s) = 2 m/s

Answer:

2 m/s is the answer .

Explanation: