Answer:
1105.29 grams
Explanation:
If you calculate the molar mass of Ca3(PO4)4 you'll get 500.13. Molar mass is the mass of one mole of a substance. Multiply 500.1194 by 2.21 because we have 2.21 moles to get 1105.264 grams.
The molar mass of Ca is 40.078 grams, and there are 3 of them. So 40.078 x 3 is 120.234 grams.
The molar mass of P is 30.974 and there are 4 P's, so 30.974 x 4 is 123.896 grams.
The molar mass of O is 16 grams and there are 6 of them. Again, 16 x 16 is 256 grams.
Add up 120.234 + 123.896 + 256 to get the molar mass of Ca3(PO4)4, 500.13.
How many atoms are in 0.580 moles of CO2?
Answer:
[tex]1.05x10^{24}atoms[/tex]
Explanation:
Hello!
In this case, according to the definition of the Avogadro's number, it is possible to realize that one molecule of CO2 contains 3 moles of atoms, one of carbon and two of oxygen, thus, we have:
[tex]0.580molCO_2*\frac{3mol\ atoms}{1molCO_2} =1.74mol\ atoms[/tex]
Then, we use the Avogadro's number to obtain:
[tex]1.74mol\ atoms*\frac{6.022x10^{23}atoms}{1mol\ atoms} \\\\1.05x10^{24}atoms[/tex]
Best regards!
Consider a reaction that connects the ends of a chain of carbons to form a ring. The closure of the ring results in the formation of a new chemical bond, with the bonding electrons going into a bonding sigma molecular orbital at a lower energy. Which of the following statements correctly describes the resulting enthalpy, entropy, and heat changes? Mark all that are correct.
A. The entropy of the surroundings decreases (AS surr < 0) because the closure of the ring results in fewer conformations for the system.
B. The system releases energy to the environment, because its internal energy decreases.
C. The entropy of the surroundings increases (AS surr > 0) because the surroundings absorb heat released by the reaction, and become more disordered.
D. The entropy of the system decreases (AS sys < 0) because the closure of the ring reduces the number of conformations the ring can adopt.
E. The enthalpy or internal energy of the system decreases (AH sys < 0) because the electrons that form the bond enter an orbital that is at a lower energy.
Answer:
The system releases energy to the environment, because its internal energy decreases.
The entropy of the surroundings increases (AS surr > 0) because the surroundings absorb heat released by the reaction, and become more disordered.
The entropy of the system decreases (AS sys < 0) because the closure of the ring reduces the number of conformations the ring can adopt.
The enthalpy or internal energy of the system decreases (AH sys < 0) because the electrons that form the bond enter an orbital that is at a lower energy.
Explanation:
Now we know that when a reaction is exothermic heat is given off. In this case, we have a reaction that connects the ends of a chain of carbons to form a ring. The bonding electrons now move into a lower energy bonding sigma molecular orbital.
This leads to a decrease in the entropy and enthalpy of the system because energy is given off, the closure of the ring reduces the number of conformations the ring can adopt and the electrons that form the bond enter an orbital that is at a lower energy.
The entropy of the surroundings is increased as energy is given out. The surroundings absorb heat released by the reaction, and become more disordered.
Which orbital is partially filled in the Zirconium (ZI) atom?
Answer:
4d orbital.
Explanation:
Hello!
In this case, since zirconium's atomic number is 40, we fill in the electron configuration up to 40 as shown below:
[tex]1s^2,2s^2,2p^6, 3s^2,3p^6,4s^2,3d^{10},4p^6,5s^2,4d^2[/tex]
Thus, the orbital 4d is partially filled.
Best regards!
How does the appearance of a substance change when it
changes phase?
Answer:
Melting: the substance changes back from the solid to the liquid. Condensation: the substance changes from a gas to a liquid. Vaporization: the substance changes from a liquid to a gas. Sublimation: the substance changes directly from a solid to a gas without going through the liquid phase.
Explanation:
The change in appearance of a substance when it changes its phase includes :
Change in volume Change in texture and Change in shapeChange in volume : when a liquid substance is heated to its boiling point ( vaporization) the volume of the liquid substance will change when it turns into gas because gases have no definite volume or shape.
Change in Texture: When water freezes it changes its state from a liquid state to a solid state, also the appearance of the liquid water will undergo changes in its texture when it is in its' solid state ( i.e. the texture of ice is not exactly the texture of liquid water )
Change in shape : when a solid substance changes its state from solid to gas ( sublimation ) the shape of the solid substance will be lost during the phase change.
Hence we can conclude that the change in the appearance of a substance when it changes its phase include. Change in volume, Change in texture and Change in shape.
Learn more : https://brainly.com/question/16785581
If you eat food containing 1800 Calories per day, according to an advertisement
you will lose weight. A handbook says that a person uses 20,000 kJ per day, given normal waking and sleeping activities. Will the person lose weight if he or she eats food as suggested by the advertisement?
Answer:
No he or she will not lose weight
No, the person will not lose weight if they eat food containing 1800 Calories per day based on the given information.
To determine if a person will lose weight, we need to compare their calorie intake with their calorie expenditure. The advertisement suggests consuming 1800 Calories per day, which is equivalent to approximately 7536 kJ (1 Calorie = 4.184 kJ).
The handbook states that a person uses 20,000 kJ per day, which is their estimated calorie expenditure. If the person consumes 7536 kJ (1800 Calories) and expends 20,000 kJ per day, there is an energy imbalance. The person is consuming fewer calories than they are expending, resulting in a calorie deficit.
In this scenario, the person is likely to lose weight. To maintain their current weight, their calorie intake should match their calorie expenditure. However, since their calorie intake is lower than their expenditure, their body will need to rely on stored energy (fat reserves) to make up the difference. This can lead to weight loss over time.
It's important to note that weight loss is influenced by various factors, including individual metabolism, body composition, and overall health. Caloric intake should be balanced with proper nutrition and physical activity to support overall well-being. It's always advisable to consult a healthcare professional or registered dietitian for personalized guidance on weight management.
To learn more about Calories, here
https://brainly.com/question/22374134
#SPJ2
Why is one side of the moon called "the dark side of the moon"?
Answer:
Option C
Explanation:
The answer is option C or "The amount of time it takes to rotate around it's axis is the same amount of time it takes to revolve around Earth."Remember that the Earth and the Moons amount of time to make a full rotation is almost in sync and they're two sides of the moon, one side we do not see and that's because that side is currently faced away from the Earth which is called the dark side of the moon. Each side has two weeks oh night, and two weeks of day because of how long it takes the moon to revolve, so while we have a side towards the Earth which is illuminated by the sun we have another pointing away in the dark.
Hope this helps.
Examine the diagram of the cell cycle.
Which label identifies the stage in which the DNA is copied and the cell grows?
A-W
B-X
C-Y
D-Z
Explanation:
i think w is the required answer
A student reacts 13 moles of iron with 21 moles of oxygen according to the following equation:
4Fe(s) + 3O2(g) +2Fe2O3(s)
How many moles of iron(III) oxide will the reaction produce?
a
34 moles
b
13 moles
c
6.5 moles
d
44 moles
Answer:
Explanation:
C
The limiting reactant in this reaction is Fe. 4 moles of Fe gives 2 moles of ferric oxide. Hence, 13 moles of Fe will give 6.5 moles of iron (iii)oxide.
What is limiting reactant ?The reactant which is not sufficient in amount determines the yield of the reaction and it is called the limiting reactant of the reaction.
In the given reaction, 4 moles of iron reacts with 3 moles of oxygen to give 2 moles of iron oxide.
given , no.of moles of oxygen gas present in the sample = 21 moles
no.of moles of Fe = 13 moles.
Here, 28 moles of Fe is needed to react with 21 moles of oxygen. Hence, Fe is the limiting reactant.
4 moles of Fe gives 2 moles of iron (III)oxide. Hence, number of moles of the product , formed from 13 moles of Fe is calculated as follows:
(13 moles ×2 moles)/4moles = 6.5m moles
Therefore, 6.5 moles of iron (III)oxide is formed from 13 moles of Fe.
Find more on limiting reactant :
https://brainly.com/question/2948214
#SPJ6
The orbit closest to the nucleus has ___________ energy.
Answer:
inonic bonds with cavalent bonds
Explanation:
ionic bonds
Which of these describes the essential conclusion of the Rutherford experiment? The atom contains a very small nucleus that contains most of its mass. The proton is positively charged and the neutron has no charge? Atoms are solid spheres with electrons suspended in them like chocolate chips in a cookie. Mass is neither made nor consumed in a chemical reaction.
Answer:
The atom contains a vey small small nucleus that contains most of its mass.
Explanation:
The Rutherford gold leaf experiment concluded that most (99%) of all the mass of an atom is in the nucleus of the atom, that the nucleus is very small (105 times small than the size of the atom) and that is is positively charged.
What type of equation is this?
AlCl3 + NaOH → Al(OH)3 + NaCL
double
single
synthesis
decomp
combustion
Calculate the pH of a solution that is prepared by dissolving 0.23 mol of hydrofluoric acid (HF) and 0.57 mol of hypochlorous acid (HClO) in water and diluting to 3.60 L. Also, calculate the equilibrium concentrations of HF, F2, HClO, and ClO2. (Hint: The pH will be determined by the stronger acid of this pair.)
Answer:
The equilibrium concentrations of HF = 0.058 , F2 = 0.006M , HClO =0.16M , and ClO2 = 7.7 × 10⁻⁷M.
Explanation:
The Ka values for HClO₃ and HF are given as 2.9 × 10⁻⁸ and 6.6 × 10⁻⁴ respectively. The molar concentration for HF = 0.23/ 3.60L = 0.064 M and 0.57/ 3.60 = 0.16 M.
When HF is reacted with water, it ionizes to form H₃O⁺ and F⁻. The concentration of H₃O⁺ and F⁻ can be calculated below:
HF(aq) <------------------------> H30^+ + F^-.
Ka = [H^+] [F^-]/[HF] .
6.6× 10^-4 = [x][x]/ ( 0.064- x).
x = 0.0060 M.
The concentration of H₃O⁺ and F⁻ = 0.0060 M respectively.
The pH = - log [ H₃O⁺ ] = -log [0.0060] = 2.22.
When HClO is reacted with water, it ionizes to form H₃O⁺ and F⁻. The concentration of H₃O⁺ and ClO⁻ can be calculated below:
HClO(aq) <------------------------> H30^+ + ClO^-.
Ka = [H^+] [ClO^-]/[HClO] .
6.6× 10^-4 = [0.006 + x] [x]/ ( 0.16 - x).
x = 7.7 × 10^-7M.
[ClO^-] = 7.7 × 10^-7 M.
[HClO] = 0.16 - 7.7 × 10^-7 = 0.16M.
[F^-] = 0.006 M.
[HF] = 0.064 - 0.006 = 0.058 M.
compute the mass-specific enthalpy change associated with Nz that is undergoing a change in state from 400 k to 800 k
Answer:
The correct answer is "430 kJ/kg". A further explanation is given below.
Explanation:
The given values are:
T₁ = 400 k
T₂ = 800 k
The average temperature will be:
= [tex]\frac{T_1+T_2}{2}[/tex]
= [tex]\frac{400+800}{2}[/tex]
= [tex]600 \ k[/tex]
From table,
At 600 k the [tex]C p[/tex] will be = 1.075
Now,
⇒ The specific enthalpy = [tex]Cp(T_2-T_1)[/tex]
⇒ [tex]\Delta h=1.075 (800-700)[/tex]
⇒ [tex]=430 \ kJ/kg[/tex]
The picture has my question
Answer:
b or c
Explanation:
Choose the correct statement regarding the behavior of water.Group of answer choicesThe heat capacity of liquid water is greater than the heat capacity of solid ice.The water phase with the smallest temperature increase when adding 10 kcal of heat is solid ice.Ice has a higher density than liquid water and therefore sinks.The water phase with the smallest temperature increase when adding 10 kcal of heat is gas vapor.The heat capacity of gas vapor is greater than the heat capacity of liquid water.
Answer:
The water phase with the smallest temperature increase when adding 10 kcal of heat is solid ice.
Explanation:
The rest of the statements are incorrect. The density of ice is lower than the density of water. The heat capacity of solid ice is greater almost twice the heat capacity of the liquid water. The heat capacity of vapors is less than heat capacity of liquid.
A solid sample of Zinc Hydroxide is added to 0.350 L of 0.500 M aqueous Hydrogen Bromide. The solution that remains is still acidic. It is then titrated with 0.500 M NaOH solution, and it takes 88.5 mL of the NaOH solution to reach the equivalence point. What mass of Zinc Hydroxide was added to the Hydrogen Bromide solution?
Answer:
6.499 g
Explanation:
One part of the aqueous HBr reacted with Zinc Hydroxide following the reaction:
Zn(OH)₂ + 2HBr → ZnBr₂ + 2H₂OAnd the remaining HBr reacted with NaOH:
NaOH + HBr → NaBr + H₂OFirst we calculate how many HBr moles remained after reacting with Zn(OH)₂. That number equals the number of NaOH moles used in the titration:
0.500 M * 88.5 mL = 44.25 mmol NaOH = mmol HBrNow we calculate how many moles of HBr reacted with Zn(OH)₂:
Originally there were (350 mL * 0.500 M) 175 mmol HBr175 mmol - 44.25 mmol = 130.75 mmol HBrThen we convert those 130.75 mmoles of HBr to the Zn(OH)₂ moles they reacted with:
130.75 mmol HBr * [tex]\frac{1mmolZn(OH)_{2}}{2mmolHBr}[/tex] = 65.375 mmol Zn(OH)₂.Finally we convert Zn(OH)₂ moles to grams:
65.375 mmol Zn(OH)₂ * 99.424 mg/mmol = 6499.8 mg Zn(OH)₂6499.8 mg Zn(OH)₂ / 1000 = 6.499 ga reaction vessel contains a small piece of magnesium metal and air (20%) of which is oxygen gas. The mixture is ignited and burns with a burst of light and heat, producing solid magneisum oxide. The mass of mgO, however, is less than the initital mass of magnesium and oxygen combined. What loss of mass
Answer: see below
Explanation:
Mg burning in air gives MgO and a smaller amount of Mg3N2
2Mg+O2=2MgO. 2*24.3+32=2*40.3
3Mg+N2=Mg3N2
Ignoring the nitride, MgO loss of mass during the reaction can be ascribed to
(1) relativistic loss as energy (too small to be measurable)
(2) During the reaction, which is strongly exothermic, a fraction f the material is blown off as tiny particles which adhere to the vessel.
Help pls!!!!!!!!!!!!!!!!!!!
Answer:
water
Explanation:
water is made up of both hydrogen and oxygen (h2o)
Would you consider an aquifer a renewable resource? Why or why not?
Answer:
an aquifer is a renewable resource
Explanation:
Aquifers are defined as the groundwater found deep in the layers of rocks.
An aquifer is considered as a renewable resource because groundwater is renewed over time. Aquifers are water resources and follow hydrological cycle through which it can renew itself.
Some of the deep aquifers are considered as nonrenewable resource because it toll hundreds of years to accumulate.
Hence, the correct answer is yes an aquifer is a renewable resource except some deep aquifers.
What is the answer for number 9 in the Half-life gizmo activity B.
ou are a work study for the chemistry department. Your supervisor has just asked you to prepare 500 mL of 3 M HCl for tomorrow’s undergraduate experiment. In the stockroom explorer, you will find a cabinet called "stock solutions". Open this cabinet to find a 2.5 L bottled labeled "11.6 M HCl". The concentration of the HCl is 11.6 M. Please prepare a flask
Answer:
Add to a 500mL volumetric flask 300mL of water, the 129mL of the 11.6M HCl solution and then complete to volume with water
Explanation:
To make 500mL = 0.500L of a 3M HCl from the 11.6M HCl stock we need first to find the moles of HCl we need:
Moles HCl:
0.500L * (3mol / L) = 1.5 moles of HCl are needed
These moles are obtained from the 11.6M HCl solution. The volume required is:
1.5mol * (1L / 11.6moles HCl) = 0.129L = 129mL must be added to the solution.
That means to prepare the 500mL of the 3M HCl you need to:
Add to a 500mL volumetric flask 300mL of water, the 129mL of the 11.6M HCl solution and then complete to volume with water
Answer:
Calculation: 11.6 M × V = 3.0 M × 0.500 liters
V = 0.13 liters
Steps for dilution:
Measure out 0.13 liters of the concentrated solution of 11.6 M HCl using a volumetric pipet.
Transfer this into solution into a 500 milliliter volumetric flask.
Add water to the flask until it reaches a total volume of 500 milliliters.
Solution: V = 0.13 liters
Explanation:
Give the formula of the alkanes his molecule contains 28 hydrogen atoms
Answer:
jayfeather friend me
Explanation:
Table 1. Summary of the Straight-Chain Alkanes
Name Formula Number of Structural Isomers
Octadecane C18H38
Nonadecane C19H40
Eicosane C20H42 366,319 (!)
29 more rows
The formula of the alkanes the molecule contains 28 hydrogen atoms is [tex]C_1_3H_2_8[/tex], i.e., tridecane.
What are alkanes?Alkanes are organic compounds made up entirely of single-bonded carbon and hydrogen atoms with no other functional groups.
Alkanes have the general formula CnH2n+2 and are classified into three types: linear straight-chain alkanes, branched alkanes, and cycloalkanes.
Alkanes are important raw materials in the chemical industry and the main component of gasoline and lubricants.
Natural gas is primarily composed of methane and ethane and is used for heating, cooking, and power generation (gas turbines).
Natural gas and petroleum are separated from the alkanes. Natural gas is primarily composed of methane, with trace amounts of other low molecular weight alkanes.
All other alkanes are derived from petroleum, which is a complex mixture of many compounds.
Here, the formula for 28 hydrogen atom containing alkane is
[tex]C_1_3H_2_8[/tex]
Thus, this given formula is of tridecane.
For more details regarding alkanes, visit:
https://brainly.com/question/4260635
#SPJ2
Calculate the number of moles in 15.5g of CaSO4.5H2O
Answer:
No. of moles = 0.0685
Explanation:
Given mass, m = 15.5g
We need to find the number of moles in 15.5 g of CaSO₄.5H2O
First, we find the mass of CaSO₄.5H2O.
M = (1×40)+(1×32)+(4×16)+(5×18)
M = 226 g/mol
We know that,
Number of moles = given mass/molar mass
[tex]n=\dfrac{15.5\ g}{226\ g/mol}\\\\n=0.0685\ \text{mol}[/tex]
Hence, there are 0.0685 moles in 15.5 g of CaSO₄.5H2O.
Sound waves are longitudinal, mechanical, compression waves.
A. True
B. False
Answer:
True
Explanation:
Sound waves traveling through air are indeed longitudinal waves with compressions and rarefactions. As sound passes through air (or any fluid medium), the particles of air do not vibrate in a transverse manner.
Answer:
true
Explanation:
ape x
If you were to burn a candle inside of a closed jar and the mass of the
closed jar and candle was 50 grams to begin with, what would the mass of
the jar and smoke be after the candle is done burning?
Answer:
50g
Explanation:
At the end of the burning process, the mass of the jar and smoke should be 50g after the candle burning is done.
In most systems, the law of conservation of matter finds expression. According to this law "matter is neither created nor destroyed but atoms are rearranged".
In this kind of system, no matter is allowed to escaped and the starting mass of the reactants compared to that of the product will be the same.
what are three things that are considered a chemical change
Answer:
Color change, precipitation, bubbling
Explanation:
Chemical change changes the chemical composition and undergoes a process in which it results as a new substance.
Which upgrade to a school will most likely reduce the school's consumption of
nonrenewable resources?
Answer: if they use solar collection panels
Explanation:
How many molecules are in 97.21 grams of Sodium Chloride (NaCl)?
There is a third bromobutene structure that could have been formed in the addition of HBr to butadiene: cis-1-bromor-2-butene (the cis isomer of structure 2). Draw this structure. Would you predict (no calculation) its heat of formation to be more or less negative that the trans isomer? Explain.
Answer:
its less negative hope I helped buster
Because trans isomers are more stable than cis isomers, the cis isomer will have a less negative heat of formation than the trans isomer.
What are cis- and trans- isomers?Cis- and trans isomers are compounds that have different configurations in space because of the presence of a rigid structure or functional groups in their molecule.
Cis atoms have functional groups on the same side.
Trans isomers have functional groups on alternate different.
The structure of cis-1-bromor-2-butene is attached.
Generally, trans isomers are more stable than cis isomers..
Stable compounds have more negative heat of formation while unstable compounds have less negative heat of formation.
Therefore, the cis isomer will have a less negative heat of formation than the trans isomer.
Learn more about cis and trans isomers at: https://brainly.com/question/4625349
Pls answer this ASAP thank you
Answer:
The anwer is not D the anwer is A
Explanation: