The initial temperature of water in the beaker is 20⁰C .
What is the correct formula to determine density?
Answer:
density =mass/volume
Explanation:
p=m/v
p means raw
m means mass
v means volume.
Will the composition of water molecules vary depending on their source?
Answer:
It does not matter where the sample of water came from or how it was prepared. Its composition, like that of every other compound, is fixed.
please helpppppppppp
Answer:
Environmental factors such as diet, temperature, oxygen levels, humidity, light cycles
And the presence of mutagens can all impact which of an animal's genes are expressed, which ultimately affects the animal's phenotype.
Why milk sours is chemical change ?
Answer:
Explanation:
So chemical changes require a change on a molecular level that cannot be reversed because they form some new substance. Souring milk is not something you can reverse, and the process of it souring produces new molecules.
Draw both the chair and boat conformation of 1,4-dimethylcyclohexane with the methyl groups as cis and trans for both conformations. Label your molecules for cis and trans. Tell which is the highest in energy.
Answer:
Boat conformation cis 1,4-dimethyl cyclohexane has the highest energy.
Explanation:
From the conformations, the boat conformation cis 1,4-dimethyl cyclohexane is least stable due to the fact that two methyl groups are located in opposite direction to each other, this leads to the production of a higher strain. Similarly, Chair conformations appear more stable than boat conformation. Hence, energy is inversely proportional to stability. As a result of the aforementioned, boat conformation cis 1,4-dimethyl cyclohexane has the highest energy.
Number of atoms in 4.5 moles of Au?
Atoms are stationary and don't move when in solid form.
False
True
Answer:
True? The don't stay exactly still i dont think, but i'd say true.
Explanation:
Answer:
TRUE
Explanation:
In a solid, atoms are packed tightly together and move very slowly. In fact, they do not flow at all: they simply vibrate back and forth.
Key words vibrate, not movement.
Correct me if I'm wrong of course
Covalent bonding occurs between atoms when 1. The potential energy of the shared elec- trons is lower in the bond than it would be if the electrons were not shared between two nuclei 2. The potential energy of the shared elec- trons is independent of the covalent bond, but the potential energy of the newly formed molecule is greater than the individual atoms 3. Covalent bonding occurs when the octet rule is satisfied regardless of the potential en- ergy of the shared electrons 4. The potential energy of the shared elec- trons is higher in the bond than it would be if the electrons were not shared between two nuclei
Answer:The potential energy of the shared elec- trons is lower in the bond than it would be if the electrons were not shared between two nuclei
Explanation:
The entire essence of chemical combination is the attainment of a lower potential energy.
When two atoms are isolated at a large distance from each other, the potential energy is high.
However as the nuclei of the two atoms approach each other, the potential energy decreases until a minimum is attained. The distance between the nuclei at this point is the bond distance.
Hence, the potential energy of the shared electrons is lower in the bond than it would be if the electrons were not shared between two nuclei.
Which of the following is a radioactive element?Sodium, Fluorine,Oxygen
francium
Answer:
Fluorine
Explanation:
These particles stick in the atoms and make them radioactive.
QUESTION 3
Identify the number that has 3 significant figures.
O A. 100
OB. 12.0
O C. 120
OD. 123.00
Answer:
D
Explanation:
4. On the island of Hawaii, Keanu notices that the sand on the beach is black, the same color as the
rock formations on the island. Keanu realizes the sand used to be part of the rock formations. How
did material from the rock formations turn into sand?
Answer:
The ricks were degraded over time by wind and water and were crushed down into tiny, smaller rocks, which is sand.
Explanation:
This is my first answer sorry im not that smart
helpp pleasee.............
Answer:
it's answer is lithium and boron.
One mole of a substance has a different number of particles as one mole of another substance.
O True
O False
pleaseee help thank youu
Answer:
i just took it the answers is C
Explanation:
Will give brainliest
A compound is found to contain 2.270 % hydrogen, 34.80 % phosphorus, and 62.93 % oxygen by mass. What is the empirical formula for this compound
Answer: The empirical formula is [tex]H_4P_2O_7[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of H= 2.270 g
Mass of P = 34.80 g
Mass of O = 62.93 g
Step 1 : convert given masses into moles
Moles of H = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{2.270g}{1g/mol}=2.270[/tex]
Moles of P = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{34.80g}{31g/mol}=1.122[/tex]
Moles of O = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{62.93g}{16g/mol}=3.933[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For H = [tex]\frac{2.270}{1.122}=2[/tex]
For P= [tex]\frac{1.122}{1.122}=1[/tex]
For O = [tex]\frac{3.933}{1.122}=3.5[/tex]
The simples ratio will be = H: P : O= 4: 2: 7
Hence the empirical formula is [tex]H_4P_2O_7[/tex]
Which chemical equations show a precipitation reaction?
Select all the correct answers.
2NaNO3(aq) + NiCl2(aq) → 2NaCl(aq) + Ni(NO3)2(aq)
MgSO4(aq) + CaCl2(aq) → MgCl2(aq) + CaSO4(s)
AlBr3(aq) + 3LiI(aq) → AlI3(aq) + 3LiBr(aq)
FeCl2(aq) + Na2CO3(aq) → FeCO3(s) + 2NaCl(aq)
2AgNO3(aq) + Na2S(aq) → Ag2S(s) + 2NaNO3(aq)
The equations that show a precipitation reaction would be [tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex], [tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex], and [tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex]
What is a precipitation reaction?It is a reaction in which two soluble salts react in aqueous solutions to form one soluble and one insoluble salt.
Thus, all the equations with an insoluble salt as one of the products will qualify as precipitation reactions. The insoluble is designated as (s).
Hence, the following are precipitation reactions:
[tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex][tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex][tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex]More on precipitation reactions can be found here: https://brainly.com/question/24158764
#SPJ2
PLEASE HELP ASAPPPP I WILL VENMO YOU MONEY IF YOU DO THIS CORRECTLY Write the name for the following compounds.
1. N2O (Covalent)
2. Cu2S (Ionic)
Write the Chemical Formula for the following compounds.
3. Dichlorine heptoxide (Covalent)
4. Magnesium bromide (lonic)
Answer:
Dichlorine heptoxide=Cl₂O₇
magnesium bromide=MgBr2
Explanation:
please help..............
Answer:
hope this help
Explanation:
change: volume of solid , volume of liquid , the volume of gases
not change: the shape of solid , the shape of liquid , the shape of gases
what type of molecule are these and what is the strongest IMFs in between?
Answer:
CH2O is formaldehyde a covalent compound and its intermolecular forces are week
KCl is an ionic compound formed by electrostatic force of attraction between positive and negative charge. Ionic compounds also exists in three dimensional crystal lattic that is why intermolecular forces in KCl is stronger.
Moreover melting point of KCl is higher than CH2O
Explanation:
Describe the process of freezing ice cream in terms of heat flow.
Answer:
Freezing the mix is one of the most important operations in making ice cream, for upon it depend the quality, palatability, and yield of the finished product. Typically, freezing of ice cream is accomplished in two steps: (1) dynamic freezing, where the mix is frozen quickly while being agitated to incorporate air and to limit the size of ice crystals formed; and (2) static freezing, where the partially frozen product is hardened without agitation in a special low-temperature environment designed to remove heat rapidly. Although these steps primarily encompass freezing, or the formation of ice crystals, there are several other important processes that take place during this time that significantly impact the quality of ice cream. Both the dispersion of air bubbles and rearrangement of fat globules occur during the freezing steps.
Explanation:
Which action is necessary for a solar eclipse to occur?
Answer:
Moon has to be in-between the Earth and the Sun.
2. Moon's umbra should sweep your place.
3. Latitude and longitude of your place should be within the befitting limits.
Which of the following describes hetereogeneous mixture... 1)A mixture that is easily separated, the components are different sixes and unevenly mixed. 2) A mixture that is very difficult to separate, the contents are evenly mixed and the mixture looks like a substance
Answer:
1)A mixture that is easily separated, the components are different sixes and unevenly mixed.
Explanation:
Mixtures are impure substances with usually indefinite composition. Their constituents often retains their identities. They can easily be separated into constituents by physical methods.
Homogenous mixtures have their constituents existing in only one phase.
Heterogeneous mixtures have their constituents existing in at least two different phases.
Heterogenous mixtures are easily separated due to the phase differences of its constituents. They are easily separated by physical processes compared to homogeneous mixtures.A local FM radio station broadcasts at an energy of 6.04E-29 kJ/photon. Calculate the frequency at which it is broadcasting.
Answer:
9.11×10⁷ Hz
Explanation:
From the question given above the following data were obtained:
Energy (E) = 6.04×10¯²⁹ KJ
Frequency (f) =?
Next, we shall convert 6.04×10¯²⁹ KJ to joule (J). This can be obtained as follow:
1 KJ = 1000 J
Therefore,
6.04×10¯²⁹ KJ = 6.04×10¯²⁹ KJ × 1000 J / 1 KJ
6.04×10¯²⁹ KJ = 6.04×10¯²⁶ J
Thus, 6.04×10¯²⁹ KJ is equivalent to 6.04×10¯²⁶ J.
Finally, we shall determine the frequency at which the FM radio station is broadcasting as follow:
Energy (E) = 6.04×10¯²⁶ J
Planck's constant (h) = 6.63×10¯³⁴ Js
Frequency (f) =?
E = hf
6.04×10¯²⁶ = 6.63×10¯³⁴ × f
Divide both side by 6.63×10¯³⁴
f = 6.04×10¯²⁶ / 6.63×10¯³⁴
f = 9.11×10⁷ Hz
Therefore, the frequency at which the FM radio station is broadcasting is 9.11×10⁷ Hz
What is the molar mass of magnesium sulfate, MgSO4?
Answer:
120.37 g/mol is the molar mass of magnesium sulfate
what is the mass of 8.07 x 10^24 molecules of 02?
Answer:Avogadro's number 6.02 x 10^23 of O2 molecules has a mass of 32 gm (atomic weight of O = 16 gm, 2 x 16 = 32).
Explanation:pls brainless
2. Explain Why would it be difficult to find the volume of a rock using
a ruler?
Answer:
Most of these rocks are not made up of common geometric shapes
Explanation:
Because most rocks are not made up of common geometric shapes, it would be difficult or impossible to find the volume of a rock using a ruler; there would be no easy way to measure the rock's volume using a ruler
Hope this helped!
what does (I) means in a chemical equation
Answer:
the l sign means the substance in the chemical equation is a liquid. (hope this helped : D )
3. What do you notice about the temperature of the substance in the test tube after it is placed in the beaker of water?
A)The temperature of the substance remains the same as it sits in the beaker of water.
B) The temperature of the substance decreases as it sits in the beaker of water.
C) The temperature of the substance increases as it sits in the beaker of water.
Answer:
C: The temperature of the substance increases as it sits in the beaker of water
Explanation:
This question was taken from a video where an attempt was made to investigate the changes in temperature when a substance undergoes change from it's solid phase to its liquid phase.
To do this, as seen in the video online, it shows a solid substance in a test tube being placed in a beaker of water.
From observation, the water in the beaker has a warmer temperature than the solid substance present in the test tube and this in turn makes the test tube gradually increase in temperature.
Thus, the solid substance will as well increase increase in temperature when it is placed in the beaker of water.
flourine is more reactive than chlorine . why ? with short reason.
Answer:
Electronegativity is probably the biggest thing that plays into reactivity. Therefore, since fluorine has a higher electronegativity than chlorine, fluorine is more reactive.
Explanation:
I got it right