What is the effect of this??
A wave enters a new medium at an angle far from 90 degrees with the boundary between the two media.

Answers

Answer 1

Answer:

Explanation:

The wavelength is the distance between two adjacent wavefronts. ... If the wave crosses to the new medium at an angle (not 90 degrees), the change ... When light enters a more optically dense medium, it is refracted closer to the normal. the same as the critical angle, light will travel along the boundary of the 2 mediums.

Answer 2
Jesus to much wave questions;-;

Related Questions

What did you have to look at it in order to correctly measure the amount of water in the graduated cylinder?

Answers

Answer:

Water sticks to the walls of the graduated cylinder, but only on the sides and not the middle. When students look at the surface, the water level is not straight.

Explanation:

meninges

meniscus

measles

metatarsle

to make it more clear for you, you have to look at bottom the meniscus. :) Rate if this helps

Calculate the mass of a liquid with a density of 4.7 g/mL and a volume of 15 mL. help me plssssssssssssssssssssssssssssssssss

Answers

Answer:

70.5g

Explanation:

D=M/V

D=4.7 g/ml

V=15ml

plug into equation

4.7=m/15

multiply both sides by 15

m=70.5g

Answer:

70.5g/ml

Explanation:

density times volume

Whats the effect?
A wave enters a new medium perpendicular to the boundary between the two media.

Answers

Answer: A wave

Explanation:

Because it’s the one that’s cause the new medium to go between the two media.

Wave A! I hope this helps :)

EASY How does the force of friction affect the motion of objects?

It causes the object to change direction.
It causes the object to create heat energy.
It causes the object to create kinetic energy.
It causes the object to slow down or stop.

Answers

Answer:

It causes the object to slow down or stop.

Explanation:

Friction is a unknown force pressing against another force slightly, making the moving object slow down.

It causes the object to slow down or stop

Pls help me I don’t understand it’s for my science class.

Plz check if correct and tell me wether each is element or compound

Answers

Answer:

there are some materials listed so next to it it shows that which material is pure substance and which material is mixture

and then the next shows which is a homologous and homogeneous compound or element

Hehejejehhehebdidkbcbf r

What type of spectrum is produced when electromagnetic radiation is emitted or absorbed as electrons change energy levels in an atom?

Answers

Then as the electrons in the atoms fall back down, they emit electromagnetic radiation (light). The amount of light emitted at different wavelengths, called the emission spectrum, is shown for a discharge tube filled with hydrogen gas in Figure 12.6 below.

The type of spectrum is produced when electromagnetic radiation is emitted or absorbed as electrons change energy levels in an atom is hydrogen spectrum.

What is hydrogen spectrum?

The hydrogen spectrum is given by the scientist Bohr and it consist of series name lyman, balmer, paschen, bracklet and p- fund as the electromagnetic radiations splits into this.

The lyman series is formed when electrons jumps from any hige energy level to n = 1 and will be same for balmer , pachen ,bracklet and p-fund are obtained when electrons jumps from any higher energy level to n = 2,3,4 and 5 respectively.

Therefore, type of spectrum is produced when electromagnetic radiation is emitted or absorbed as electrons change energy levels in an atom is hydrogen spectrum.

Learn more about hydrogen spectrum, here:

https://brainly.com/question/6836691

#SPJ2

What is convection?

a Transfer of heat through objects touching the source

b Transfer of heat through direct physical contact

c Transfer of heat through electromagnetic waves

d Transfer of heat through the movement of particles

Answers

Answer:

d transfer of heat through the movement of particles

The correct answer is option d: Transfer of heat through the movement of particles. Convection is a mode of heat transfer that occurs through the movement of particles.

Convection is the transfer of heat through the movement of particles in a fluid, such as a gas or liquid. Option (d) is the correct answer. Convection occurs when a temperature difference exists within the fluid, causing the hotter particles to become less dense and rise while the cooler particles sink. This movement creates a circulation pattern known as convection currents. Convection is a significant mechanism for heat transfer in various natural and man-made systems. For example, when a pot of water is heated on a stove, the bottom of the pot gets hot, causing the water near the bottom to heat up and expand. This hot water rises to the top, transferring heat to the surrounding cooler water. As a result, the water circulates in a convection current, leading to a more uniform distribution of heat. Convection is also responsible for phenomena like ocean currents, atmospheric circulation, and even the formation of thunderstorms. It plays a crucial role in distributing heat within the Earth's atmosphere and oceans, impacting weather patterns and climate.

For more question on heat

https://brainly.com/question/30738335

#SPJ8

What would happen if the sand dunes in an area were destroyed?

Answers

if the dunes were destroyed in an area, the upland property and natural habitats
sand dunes protect inland areas from swells, tides, and winds so I think natural disasters would go into play

Electromagnetic waves do not need to carry blank. Electromagnetic waves carry enough through matter, but they also carry enough energy through empty blank in a vacuum.

Answers

Answer: what? whats the quiestion?

Explanation:

What do you see happen when you increase the frequency?

Answers

When frequency increases more wave crests pass a fixed point each second.
Hope this helps!! Pls mark as brainliest!! (It’s a image btw) have a great night!

Please help me I will give you the brain thing and extra points. part 3

Answers

it’s is b because b and b match up

6 Carbon atoms

In the 1st half, there are only 6 Carbon and it is the same on the other side, meaning it is a balenced reaction :)

The amplitude​ of a wave is related to the energy of a wave. Did you see anything on the screen that made you think this or could prove your point? How could you demonstrate this relationship?

Answers

Answer:The higher the amplitude, the higher the energy. To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.

Explanation:

The amplitude​ of a wave is directly related to the energy of a wave.

What is amplitude?

Amplitude is the maximum distance covered by a body from the main point in the vibrating mode.

As we know that energy of the wave is directly proportional to the square of the amplitude:

E ∝ (a)²

As the amplitude of wave increases, energy carried by the wave is also increases. Higher energy increases the amplitude of the propagating wave.

To learn more amplitude, visit the below link:

https://brainly.com/question/413740

Veronica observes how the force of friction causes an object to slow down. She writes the following observation: When an object moves across a smooth surface, there is less friction created than when an object moves across a rough surface. When the object stops moving, friction is created. Which statement corrects the error(s) in Veronica's observations?

It is not smooth or rough surfaces that affects friction. It is the size of the push.
When an object moves across a rough surface, there is no friction.
When an object moves across a smooth surface, the friction increases.
When an object stops moving, there is no friction.

Answers

No surface is completely smooth, friction happens. There is higher friction between rougher surfaces. So, it is the wrong statement that smooth or rough surfaces do not affect friction.

What is friction?The resistance to motion of one object moving in relation to another is known as friction. It is not regarded as a fundamental force like gravity or electromagnetic.The interplay of small bumps on the surfaces of objects as they rub together is thought to be the primary source of friction, though scientists are not entirely certain of this. Particles that stick out above the rest can be found on even the most smooth surfaces. As the objects move, these high points collide and scrape against one another, creating resistance. Friction is brought on by this unwillingness to move.Sliding friction, fluid friction, and rolling friction are the three primary categories into which friction can be categorized. The items that are moving and the force being applied to them determine the type of friction.

To learn more about friction, refer to

https://brainly.com/question/24338873

#SPJ2

PLEASE HELP ME ASAP!!! THIS IS DUE IN 1 HOUR!!!
MONDAY-Explain how you find the volume of an object. (be detailed)

Answers

The volume of an object is how much space can fit inside it. To find the volume of an object, you multiply its length, times its width, times its height. The end result is the volume, which is measured in cubed units (inches sub 3).

The diagram shows a generator powered by a water turbine. Based on the diagram, what type of energy transformation takes place in the generator?

A
Mechanical energy is transformed into electrical energy.

B
Chemical energy is transformed into kinetic energy.

C
Electrical energy is transformed into potential energy.

D
Electrical energy is transformed into chemical energy.

Answers

Answer: C

Explanation:

The transformation takes place in the generator is mechanical energy is transformed into electrical energy.  Hence option A is correct.

What is energy transformation?

Energy transformation is defined as the conversion of energy from one form to another. The passage of energy from one place to another is known as energy transfer. When energy transforms, it goes from one type to another.

Hydroelectricity is a type of renewable energy that produces electricity by harnessing the force of moving water. Mechanical energy is transformed into electrical energy in a generator. Most generators create alternating current as their source of electricity. A generator spins when a turbine's blades rotate due to falling water, converting the mechanical energy of the spinning turbine into electrical energy.

Thus, the transformation takes place in the generator is mechanical energy is transformed into electrical energy.  Hence option A is correct.

To learn more about energy transformation, refer to the link below:

https://brainly.com/question/29102331

#SPJ2

how waves affect matter at the macroscopic and particle levels.

Answers

In a macroscopic object, each particles wave is being absorbed and combined with the waves of the other particles to create one wave for the entire object. Since this object is able to be seen, the wave function immediately collapses.

Anytime you possess anykind of information about the world around us, some wave, somewhere function collapses.

In short, if we can see the object, then it has no wave function.

=:)



Is mass conserved when 10 g of sodium hydroxide undergoes a chemical change during an interaction with 57 g of copper sulfate? Use complete sentences to support your answer by explaining how this can be demonstrated.



please use complete sentences for the answer/an explanation, i'm confused on this questionn v( ‘.’ )v ...

Answers

Answer:Instead of “theory” scientists use the word hypothesis to describe a possible explanation for a scientific mystery. Theories in science are hypotheses that.

Explanation:

_________ energy is to the fission and fusion within an atom as ________ energy is to the fission of atomic compounds.

a. Chemical; Thermal
b. Nuclear; Chemical
c. Nuclear; Radiant
NEED HELP FAST

Answers

I would say C bc I don’t rlly think it’s A or B

Answer:

Watch Naruto that's the answer

Explanation:

When complete, the lab report should be read as a coherent whole. Make sure you connect different pieces with relevant transitions. Review for proper grammar, spelling, punctuation, formatting, and other conventions of organization and good writing.

Answers

Answer: you need to specificlly write down what you did for your lab report and do what all of thet stuff says to do

Explanation:

Answer:

So I went threw the student guide and read it carefully. Then I went threw the walk threw with the teacher and the step by step guide to get the lab done. when did multiple test an example is the height of the track and we did multiple times on that height to see it the results where same or had little difference.  As I went threw it I recorded the data because I was asked to. then i filled out the questions for the lab!

Explanation:

just did it hope it helps future people

1. compare and differentiate weathering erosion.
2.give one example of weathering and one example of erosion that we may observe in our environment every day . ( please keep on moving if your not gonna help , i really need points , so please don't just say idk) (Thanks for the person that actually does)

Answers

Explanation:

weathering is the act of break down of big rocks by sun

Weathering is wearing away the surface of the rock, an example, wind and water cause small pieces of rock to break off at the side of the mountain. EROSION happens when rocks and sediments are picked up and moved to a different area, an example is water getting into cracks then when it freezes it expands causing the area to crack apart

Otis watches a cooking show on making mayonnaise. The chef dissolves salt and sugar in vinegar. She mixes in an egg yolk, and then mixes in oil until the ingredients are completely blended together. The chef says that it’s great on sandwiches and that it can be stored without separating.

Which best describes the purpose of the egg yolk in the recipe?

Answers

Answer:

It acts to hold the vinegar and oil together in a colloid.

Answer:

b

Explanation:

i took the test

What happens in a landslide?


Water moves into an area where it does not belong.


Earth materials that are no longer held by friction move down a slope.


The upper region of a hill becomes built up by rocks.


Soil washes away into a stream.
(This is science)

Answers

The answer is B Earth materials that no longer held by friction move down a slope.

1. If the frequency of a wave increases from 2 Hz to 4 Hz without the wavelength changing, how will the wave speed change? PLS HELP!!!! WILL MARK BRAINLIST!!!!!!!

Answers

Answer:

biraz naruto izle

Explanation:

Which best completes the analogy?
Thyroid : Neck :: Pancreas : ___________________
A. Brain B. Stomach
C. Kidneys D. Chest

Answers

The answer is ether stomach or kidney
I think stomach. I looked it up and it said digestive system which is behind your stomach. Hope this helped. Please give Brainly

When a force is applied to an object, its _____, the object _________________________________________________________.

Subject = Science

Answers

......................

The amplitude​ of a wave is related to the energy of a wave. How could you demonstrate this relationship between energy and wave

Answers

Answer:

People holding the slinky supply the energy to make the patterns. To make pattern 1, people have to shake the slinky back and forth at a certain speed. To make pattern 2, the slinky has to be moved back and forth faster (higher frequency). To make pattern 4, the people need to move the slinky back and forth much faster. It is much easier to make pattern 1 than pattern 4 because it takes less energy. This illustrates the relationship between frequency and energy – the higher the frequency, the higher the energy.

Explanation:

Which of the following best describes a suspension?

A.
A mixture whose components are evenly distributed throughout.
B.
A mixture whose components will settle out over time.
C.
A mixture whose components will not separate over time but does not form a solution.
D.
A mixture whose components consist of a liquid dispersed in another liquid but does not separate over time.

Answers

Answer:

A mixture whose components are evenly distributed throughout.

Hi, Im new! But, why is physical and chemical changes are different?

Answers

Answer:

Physical and chemical changes are different because one deals with changes to ones shape or form, while chemical is changing one substance to another.

Explanation:

A example of a physical change would be cutting a block of wood into a cube of would, its physical change changes from a block to a cube. A chemical change is changing the substance into another substance so for example, burning that cube of wood in a fire. The fire is burning the wood into ash meaning it's no longer wood but ash.

Hope this helps.

do you think the reflected waves would ever return to the airplane that transmitted them? explain

Answers

no, it is very unlikely for that to happen.

The reflected waves should not return back to the transmitted source if there no hindrances in the moving  trajectories. If there is any hindrance or objections in front of the reflected wave there may occur some directional change and does not return to the airplane.

What is reflection?

Reflection is phenomenon by which an incident wave on an object return backs in the straight direction. Reflection make an object shiny as we see from a mirror.

When light passes through a transparent or translucent material it penetrates through it and will refract or scatter from the object. This will happen when the frequency of the incident light does not matches with the frequency of  the incident light.

If the a some waves are transmitted from an airplane and they are reflected in a straight direction, it will not revert back to the airplane because the reflected light  will moves in a straight direction back from airplane.

To get more on reflection, refer here:

https://brainly.com/question/15487308

#SPJ2

Need this asap ill mark brainliest On the Internet, many authors post opinion articles on scientific topics. What are the benefits and drawbacks of these opinion articles in regard to scientific discussion?

Answers

Answer:

A benefit of the opinion of a scientific author is that you can see others points of view on a subject.  A drawback is that they are using an opinion and most likely not stating unbiased facts.

Explanation:

Hope this helps

Answer:

Highlights:

*Researchers in the sciences do not see access to the scientific literature as an especially important problem.

*Authors consider factors such as journal reputation and the absence of publication fees when deciding where to submit their work. In contrast, free access is not a significant factor in their submission decisions.

Implications:

*While open access has the potential to expand the authorship and readership of the scientific literature, that potential has not yet been realized.

*Librarians who encourage scientists to publish in open access journals should be aware of the authors' priorities and perspectives. Authors in the sciences tend to focus on citation impact, reputation, and accessibility to a specialized readership—not breadth of readership, copyright, or access status.

*Journal publishers that charge publication fees may want to consider alternative sources of revenue. Authors' resistance to publication fees is a major barrier to greater participation in open access initiatives.

Explanation:

Other Questions
Please help its due What was Woodrow Wilsons peace plan following WWI? What was the League of Nations? why is it better to hold a musical events or programs in the evening? Which statement is false?1. Print media stopped writing about the Space Race because television was already covering the news.2. During the 1960s, television news casts focused on headlines and big stories, while newspaper reports were more detailed.3. Walter Cronkite was personally enthusiastic about Americas space program, so he covered the news frequently during his news casts.4. American rhetoric at this time declared space exploration a duty of the American people. A(4, -1), B(3, 8), C(-1, 1); y = -2 Simplify: 6(2x 5)12x 3012x + 3012x 3012x + 30 ANYONE PLLSSS HELP DIS PAST DUE Which phrases from the first stanza of the poem illustrate the use of imagery? Check all that apply. Chicago " it is snowing softly " "and a man has just " "he steps into the twilight " "carrying a wrinkled shopping bag" Why did the U.S. State Department repealPaul Robeson's passport and bar him frominternational travel? 8. It took Sharon 85 minutes to wash three cars. She spent x minutes on each car and 10 minutesputting everything away. Solve 3x +10 = 85 to find out how long it took to wash each car.a. 5.5 minutesb. 28.3 minutesc. 25 minutesd. 31.65 minutes Which is a monthly cost associated with renting a house? A. utility bills B. property tax C. security deposit Put the following equation of a line into slope-intercept form, simplifying allfractions.8y 4x = -56 The photograph shows one way individuals work together in groups. Whatkind of work is shown in the photograph? Using complete sentences, list the three benefits nation-states acquire when they are recognized by other nation-states. Which term refers to the semicircular area directly over the door in a portal?A. NaveB. TranseptsC. TympanumD. Cruciform plan Is calcium oxide a Element or compound or mixture? *HELP ASAP I HAVE 20 MINS AND IT NEEDS TO HAVE AT LEAST 2-3 SENTENCES PLEASE!*As Benjamin Franklin was leaving the last session of the Continental Congress, a woman asked, "Well, Doctor, what have we got: a republic or a monarchy?" Franklin answered. "A republic, if you can keep it."What do you think Benjamin Franklin meant by his remark? A race car with a 255 hp (1.90 105 W) engine is able to accelerate from rest to its top speed in 9.00 s. How much work does the car's engine do in this interval of time? major william b hartsfeild is best known for Which expression is equivalent to 6 (a minus 3)?