Answer:
There are two major categories of energy: renewable and non-renewable.
Non-renewable energy resources are available in limited supplies, usually because they take a long time to replenish. The advantage of these non-renewable resources is that power plants that use them are able to produce more power on demand. The non-renewable energy resources are:
CoalNuclearOilNatural gasRenewable resources, on the other hand, replenish themselves. The five major renewable energy resources are:
SolarWindWater, also called hydroBiomass, or organic material from plants and animalsGeothermal, which is naturally occurring heat from the earthWhile renewable energy resources have the advantage of unlimited supply over the long haul, they are limited in their availability at any given moment.
For example, the sun rises each day, but its ability to generate power is limited when its cloudy. Another disadvantage is that power plant operators can’t crank up renewable energy production when people are consuming more power, such as on a hot day when many people are running air conditioners at the same time.
pls help
Plot the point (5,9)
True or False:
Houston, Texas received approximately 2 inches of snow on February 15, 2021. Based on this, we can now say Houston's climate consists of long, freezing winters and yearly snowfall. Please answer ASAP. Thanks
Answer:
False.
Explanation:
I majored in Chemistry
Which name for an ionic compound is
incorrect?
Chromium(IID fluoride (for CrF3 )
Copper(ID) oxide (for Cuo)
Potassium(I bromide (for KBr)
Answer:
no se ingles todavía no aprendo a hablar inglés ya si estuvieran en español los respondia
Pls help I’ll mark brainliest pls pls pls
Answer:
the tea was not hot sugar dissolves quickly and hot water than cold
Chemical reactions happen when _____. a.atoms attract or repel one another b.heat is created by friction c. two or more substances are mixed substances are heated or d.cooled
Answer:
A
Explanation:
How many moles are there in 1.20 x 1025 particles of helium?
Answer:
You would get 19.969 moles.
Explanation:
You would get 19.969 moles.
I’m stuck on number 2
What would be an inference you could make about this cat?
Answer:
pickles are ligit good
Explanation:
i like pickles but not his
 how are subscripts determine the formula of ionic and covalent compounds ?
Answer:
To determine the correct subscripts in a chemical formula, you have to solve how many atoms you need to balance the charge.
For example if I had the compound Calcium Fluoride I would look at the periodic table and see that Calcium's ionic formula is
Ca2+
. How do I know this? Well all elements want to have 8 valance electrons so they can be stable(happy). Seeing that Calcium has 2 valance electrons it is going to give away 2 electrons because that is easier than gaining 6 to be happy. Since Calcium has given away 2 electrons it has two more protons than electrons. We know that Protons have a Positive charge, Electrons have Negative charge, and the number of electrons is equal to the atomic number of an element in its pure non-ionic state. (Meaning it doesn't have a positive or negative charge; it is balanced.)
So if calcium gave away two electrons, it will have two more protons than an electron giving it a (2+) charge. The same process can be applied to Fluoride. Since fluoride is one to the left of the noble gases(group 18 or 8A) on the periodic table we know that it has 7 valance electrons because it is in group 7A or 17.
Knowing that we have 7 electrons the fluoride atom will gain an extra electron. Since the fluoride atom gained an extra electron it will have one more negative charge than a positive making it a ^(−)ion.
So you know that Calcium has a 2+ charge and that fluoride has a 1- charge, you then need these ions to balance out. So you need two fluorine atoms with a 1- ions to balance out the 2+ ion of calcium. Your final answer would be
CaF2
because you need two fluorine atoms to balance out the 2+ charge of the calcium.
Final Tip: Determine the charges then inverse the charges, remove the positive and negative superscipts, and write the charge numbers as a sub script. Ie. Calcium Fluoride
Ca2+ and F−
inversing and removing the charge signs would give you
why are oxidation numbers assigned to the elements before writing a chemical formula
Answer:
Oxidation numbers assign ownership of the electrons to one atom or another in a compound. ... Scientists use these numbers to help name compounds, write formulas and balance chemical equations. They are also useful when studying reactions and they can help you identify when something is oxidized or reduced.
determine the empirical and molecular formulas of a compound that gives the following analysis in math percent: 24.27% C,4.07% H, and 71.65%CL. the molar mass is known to be 197.92g/mol.
Answer:
help me with this
Explanation:
In a graph, what effect would adding a catalyst have on D?
A. It would decrease.
B. It would increase.
C. It would stay the same.
D. You cannot tell from this graph.
Answer:
C. It would stay the same
Explanation:
PLATO answer
Which one of the following ionic solids would have the largest lattice energy?
CaBr2
CsI
CaCl2
NaCl
NaF
Answer:
CaCl2
Explanation:
The ionic solid CaCl₂ would have the largest lattice energy. Therefore, option (c) is correct.
What is the lattice energy?Lattice energy is the heat of formation when one mole of crystalline ionic solid is generated from its constituent ions in their gaseous state.
For example, the lattice energy of sodium chloride crystal is the energy change of reaction when Na⁺ and Cl⁻ ions react to produce a NaCl crystal, which is equal to -786 kJ/mol.
The relation between lattice energy and lattice enthalpy at constant pressure is given by:
ΔU (lattice) = ΔH (lattice) - PΔV
Lattice energy is directly proportional to the charge on ions and inversely proportional to the interionic distance between ions.
For NaCl and NaF the charge on the ions is +1 and -1 while the size of the ions is small. So they have less lattice energy.
CsI ionic solid have a larger size of ions Cs⁺ and I⁻. So CsI will have less lattice energy. CsBr₂ has +2 charge on calcium but the size of both ios is larger. So, CsBr₂ will have less lattice energy.
CaCl₂ has + 2 charge on calcium as well as the ionic radius is also samll. Therefore, CaCl₂ would have the largest lattice energy.
Learn more about lattice energy, here:
https://brainly.com/question/13169815
#SPJ2
How many atoms of which elements are represented by the following formula?
H3PO4
How many atoms is 45 moles of silicon (Si)?
how does bases taste?
Answer:
bases taste bitter, feel slippery, and conduct electricity when dissolved in water
Explanation:
Answer:
like peas
Explanation:
How many atoms is 45 moles of silicon (Si)?
Jewelry and tableware are sometimes made of sterling silver. Sterling silver is 92.5% silver (Ag) and 7.5% copper (Cu). If you wanted to make 30 grams of sterling silver for a ring, how many grams of silver and copper would you need to start with?
Amount of sterling silver?
Amount of copper?
total grams of alloys needed?
Answer:
12.33
Explanation:
92.5/7.5= 12.33
30g of the sterling silver ring contains, 27.75 g of silver and 2.25 g of copper.
What is cross multiplication?Cross multiply fractions by multiplying one fraction's denominator by the other fraction's numerator and then comparing the two values. The larger fraction is the one with the higher value.
100g of sterling silver contains 92.5g of silver and 7.5g of copper.percentage of element = amount of the element present in 100 g of materialTherefore,
100g sterling silver = 92.5g silver30g sterling silver = X g silver( cross multiplication),
100 × X = 92.5 × 30
X = 92.5 × 30/ 100
X= 27.75g silver100g sterling silver = 7.5g copper
30g sterling silver= Y g copper
(cross multiply)
100 × Y = 7.5 × 30
Y= 7.5 × 30 / 100
Y= 2.25g copperX (silver)= 27.75 g in 30 g of sterling silverY (copper)= 2.25 g in 30 g of sterling silvertherefore, 30g of sterling silver ring contains, 27.75 g of silver and 2.25 g of copper.
To learn motre about cross multiplication, refer to:
https://brainly.com/question/28839233
#SPJ2
How many protons does isotope of carbon- 14 atom have
Answer:
Number of protons in Carbon - 14 atom [tex]6[/tex]
Explanation:
The atomic number of carbon 14 atom is [tex]14[/tex]
Number of neutrons in the nucleus of Carbon-14 atom [tex]= 8[/tex]
Atomic number is equal to the sum of neutrons and protons
Number of protons in Carbon - 14 atom [tex]= 14 -8 = 6[/tex]
A 57 g g sample of iron reacts with 24 g g of oxygen to form how many grams of iron oxide?
A 57 grams sample of iron reacts with 24 grams of oxygen to form 81 grams of iron oxide.
What is iron oxide?
Iron oxide is a chemical compound that is made by the addition of iron and oxygen can also be known as ferrous oxide if react with two oxygen molecules then ferric oxide.
In the sample, the iron is 57 grams and the oxygen is 24 grams,
Fe + O -------------> FeO
Iron oxygen iron oxide
By adding the mass of iron and oxygen,
57 + 24 = 81 grams of iron oxide.
Therefore, the mass of iron oxide is 81 grams if 57 grams sample of iron reacts with 24 grams of oxygen.
Learn more about iron oxide, here:
https://brainly.com/question/9496279
#SPJ2
Calculate ΔGo if the equilibrium constant is 1.37 x 10-5
Explanation:
your answer willing be 8.7
How many moles are in 74.8 grams of NaCl?
Answer:
1.28 mol NaCl
Explanation:
Find the mass of NaCl by adding the two elements atomic mass
Na: 22.99
Cl: 35.45
22.99+35.45=58.44 g
Now convert to moles
74.8 g / 58.44 g = 1.27994524298 mol
An artificial reef is intended to affect the ocean ecosystem by — А A removing pollution from the water B В providing shelter for marine organisms causing sediment to erode into deeper waters D preventing people from overfishing along the shore
Answer:
B
Explanation:
just answered
An artificial reef is intended to affect the ocean ecosystem by providing shelter and habitat for marine organisms causing sediment to erode into deeper waters. Hence, option C is correct.
What is artificial reef ?An artificial reef is a human-made underwater structure, typically constructed with the purpose of enhancing marine biodiversity, providing habitat for marine organisms, and promoting recreational activities like fishing, diving, and snorkeling.
Artificial reefs can be created from a variety of materials, such as concrete, metal, tires, and sunken ships. The reef structure can also increase the overall biodiversity of an area by creating a new habitat for species that may not have been present before.
Additionally, the presence of an artificial reef can help to reduce pressure on natural reefs by providing an alternative location for fishing and other activities. However, artificial reefs are not typically used as a means of removing pollution from the water or preventing erosion.
Therefore, option C is correct.
Find more on artificial reef:
https://brainly.com/question/17238115
#SPJ2
Hypothesis: What do you think will happen when you add more magnets to the set up?
Answer:
........................
Can someone help me over here? I need an negative charge and also another thing is that in a question it asked me to use something that would represent an ion. I’m not sure on what to choose either Hydrogen or Helium but just please send help.
Answer:
You could use a hydrogen anion which has 2 electrons.
Explanation:
An ion is an atom or molecule with a net electric charge because it has more or less electrons compared to the original atom or molecule.
An anion is a negatively charged ion.
A cation is a positively charged ion.
Normally a hydrogen atom has one proton and one electron.
So a hydrogen anion (H-) means that it has one proton and two electrons, which means the positive charge will be +1 and the negative charge will be -2.
Ultimately, giving the entire molecule a net charge of -1 because -2+1 = -1.
(I hope this helps! I am not 100% sure what's the format of this question. Like is it interactive? online? Did you draw all those electrons on the diagram? or were they given? Are the numbers given as well? or did you type those in? So I just tried my best to give you something that might work.)
13. What is the meaning of the word faint?
g 8. A hydrogen atom is initially a rest and in the ground state. A proton with kinetic energy 1000 eV scatters off the atom. In the process the hydrogen atom is ionized. The kinetic energy of the ionized electron is measured to be 15.2 eV and the kinetic energy of the proton produced from the ionization of hydrogen is 4.3 eV. What would be the final kinetic energy of the projectile proton after the collision
Answer:
Explanation:
Ionization energy of hydrogen atom is 13.6 eV . This energy will be provided by energetic proton , the kinetic energy of which is 1000 eV. The kinetic energy of ionized electron is 15.2 eV . Kinetic energy of proton produced from from the ionization of hydrogen or the nucleus of the hydrogen atom is 4.3 eV . All these energy must have come from kinetic energy of initial proton.
So kinetic energy of projectile proton after collision
= 1000 - ( 13.6 + 15.2 + 4.3 ) eV.
= 966.9 eV .
The energy associated with a current is called____________
(A) mechanical energy
(B) magnetism
(C) geothermal energy
(D) electrical energy
Answer:
D. Electrical energy
Explanation:
I assume you are talking about an electrical current.
(These are by what I know and are simplified, not an exact definition)
A. Mechanical energy is energy that something has because of motion.
B. Magnetism is the attracting and repulsing forces between magnets.
C. Geothermal energy is heat inside of the Earth. Used as source of power.
D. Electrical energy is the result of an electric charge.
How many moles are contained in 7.88 x 10^24 atoms of Iron
Answer:
1.31 × 10^47
Explanation:
1 mol of Fe =
[tex]1 \: mol \: of \ fe = 6.02 \times 10 ^{23} \ \\ x \: mol \: offe \: = 7.88 \times {10}^{24} \\ \\ \\ so \: 7.88 \times {10}^{24} \div 6.02 \times {10}^{23} \\ \\ x = 1.31 \times {10}^{47} [/tex]
how do I find the slope of this graph? Is it even possible?
Answer:
Not exactly But you can take the slope of the curved portion and the slope of the flatline.
It wont do you much good since your working for absorbance but if you ever see something like a temperature change you can use the slope(s) to find freezing points/melting
Explanation:
If you need to submit a slope you could use a best fit which is just point to point or you could break it up like i mentioned