Answer:
radio waves are the sound waves that are produces by a radio
Explanation:
_____ is responsible for bringing gravity into modern science.
Isaac Newton
Galileo Galilei
Albert Einstein
A magnet is different from a piece of iron that is not magnetic because
Answer:
Under normal conditions, a magnetic material like iron doesn't behave like a magnet because the domains don't have a preferred direction of alignment. On the other hand, the domains of a magnet (or a magnetized iron) are all aligned in s specific direction.
Explanation:
An 240. mL sample of oxygen at 90.00C and was cooled at constant pressure
until it has a volume of 450.0 mL. What was the final Celsius temperature of this
gas? *
The final temperature : T₂ = 680.625 K
Further explanationGiven
V₁=240 ml
T₁ = 90 + 273 = 363 K
V₂ = 450 ml
Required
The final temperature
Solution
Charles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
Input the value :
T₂ = V₂T₁/V₁
T₂ = 450 x 363 / 240
T₂ = 680.625 K
The air we breathe contains different individual gases (mostly nitrogen and oxygen). Which of the following correctly describes the air we breathe?
a
element
b
compound
c
mixture
d
none of these
protons are one of the heavier pieces of an atom. true or false?
Answer:
true
Explanation:
18. What is the molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach
Answer:
0,1276 M
Explanation:
Molair mass of NaOCl = 74,44 g/mol
You have 9,5 g/L.
You need to calculate with the molair mass, how many moles 9,5 g are:
9,5 g / 74,44 g/mol = 0,1276 mol
0,1276 mol / 1 L = 0,1276 M
The molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach is mathematically given as
M= 0.1276 M
What is the molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach?Generally, the equation for the Molar mass is mathematically given as
M=m/(g/mol)
Therefore
M=9,5 g / 74,44 g/mol
M= 0,1276 mol
Hence
M= 0.1276 M
In conclusion, the molarity
M= 0.1276 M
Read more about Molarity
https://brainly.com/question/9149034
#SPJ2
PLEASE HELP Will give brainliest and 50 points!! Please give honest answers
For each type of fuel shown in the table above (H2, CH4, O2), how much energy should
be added to the system in order to break the bond between the atoms forming the
molecule of the fuel?
Answer:
Explanation:
Chapter 4: Energy from Combustion The primary means of generating energy for human
endeavors is the combustion of fuels.
Coal - burned in power plants
Gasoline - burned in automobiles
Natural gas - heating
Heating oil – heating
.Propane, charcoal, wood, candles, …
Combustion (burning in air) releases the chemical energy,stored in the chemical bonds of the fuels.
BRAINLY PLZ
What is the molar mass of Al(NO3)3 · 3H2O?
Answer:
Go to your periodic table and look for each element. Find the mass for Aluminum, Nitrogen, Oxygen, and Hydrogen.
After you find those, for each compound you must add them together and find the least amount of sig figs after the decimal point.
For the first compound, Al(NO3)3, you will have a total of
1 Aluminum atom
3 Nitrogen atoms
9 Oxygen atoms
Aluminum has 26.982 g/mol
Nitrogen has 14.007 g/mol
Oxygen has 15.999 g/mol
Now multiply those numbers by the amount of atoms of each element.
(1)26.982 g/mol = 26.982 g/mol
(3)14.007 g/mol = 42.021 g/mol
(9)15.999 g/mol = 143.991 g/mol
now add all of those numbers together, and you see that their least significant figure after the decimal is 3, so round to 3 digits after the decimal point.
26.983 + 42.021 + 143.991 = 212.994
now do the same for the other compound
to start you off.. you have
6 Hydrogen atoms
3 Oxygen atoms
Hydrogen has 1.009 g/mol
Oxygen has 15.999 g/mol
the least significant figure after the decimal point is 3, so round you 3 digits after the decimal point.
after you finish getting your totals, you. until them and find the greatest sig fig over all. comment on this if you need further instruction :)
If one mole of an unknown substance is 200.59 g/mole, what is the mass of 0.33 moles of that substance?
Answer: 66.83g
Explanation: (200.59 g/mole = Hg)
0.33 moles = 66.83g
A car left from its initial position at 6 pm. The car arrived at its final position at 11pm. How much time did it take the car to arrive ?
Answer:
5 hours.
Explanation:
Given that,
Initial time, [tex]T_i=6\ pm[/tex]
Final time, [tex]T_f=11\ pm[/tex]
We need to find how much time did it take the car to arrive.
Time = final time-initial time
= 11 pm - 6 pm
= 5
So, it takes 5 hours by car to arrive.
Give an example of an object that has potential energy
Answer:
A book on a shelf
Explanation:
HURRY!!!! TIMED!!! WILL GIVE BRAINLIST!!!
A 10.0 g sample containing calcium carbonate (CaCO3) and an unreactive material was placed in excess hydrochloric acid, HCl. A reaction occurred, producing calcium chloride (CaCl2), water, and carbon dioxide. (a) write a balanced equation for the reaction (b) when the reaction was complete, 800 mL of carbon dioxide gas was collected. How many moles of calcium carbonate were used in the creation? (c) How many grams of CaCO3 were used? (d) If there was another contaminant in the sample that was not unreactive, would this have caused the percent yield of carbon dioxide to be higher, lower, or the same, explain your answer.
Explanation:
(a) write a balanced equation for the reaction
CaCO3 + HCl --> CaCl2 + H2O + CO2
The balanced equation is given as;
CaCO3 + 2HCl → CaCl2 + H2O + CO2
(b) when the reaction was complete, 800 mL of carbon dioxide gas was collected. How many moles of calcium carbonate were used in the creation?
From the balanced reaction;
1 mol of CaCO3 reacts to produce 1 mol of CO2
1 mol of CO2 = 22.4 L of CO2
This means;
1 mol of CaCO3 reacts to produce 22.4L of CO2
x mol would produce 800ml (0.8 L) of CO2
1 = 22.4
x = 0.8
x = 0.8 * 1 / 22.4 = 0.0357 mol
(c) How many grams of CaCO3 were used?
Mass = Number of moles * Molar mass
Molar mass of CaCO3 = 100.0869 g/mol
Mass = 0.0357 mol * 100.0869 g/mol = 3.57 g
(d) If there was another contaminant in the sample that was not un reactive, would this have caused the percent yield of carbon dioxide to be higher, lower, or the same, explain your answer.
The same
An un reactive contaminant in the sample is most likely a catalyst. Catalysts only affect the rate of reaction. They do not affect yields of products.
research ocean currents and how they relate to heat transfer.
Answer:
The movement of this heat through local and global ocean currents affects the regulation of local weather conditions and temperature extremes, stabilization of global climate patterns, cycling of gases
During vaporization, heat energy is:
Answers:
Added
Released
Stays the same
Answer:
During vaporization, heat energy is added.
Something that is made out of natural resources for human use is called? Synthetic Resource Natural Resource Materials Living Organisims
Answer:
Natural Resource
Explanation:
A natrual resource is something that was created when Earth was first made. They were intended to fulfill human needs when they needed them. An example of a natural resource can be water, because we will need water to survive.
pls help 6th grade science
⚠️⚠️PLEASE HELPP⚠️⚠️
Describe an every day example of an object that has energy of motion and object that has stored energy
Answer:
Humans
Explanation:
Humans have energy of motion and store energy.
Every object will have any form of energy. For instance, when we are walking we gains a kinetic energy. We use electronic devices where electrical energy is stored and can be converted to mechanical energy to activate any motors.
What is energy transformation?Energy can neither be created nor be destroyed. However it can be transformed to any other forms. Thus, the total energy will conserved always.
We have a lot of example for energy transformation and storage. The energy form stored by virtue of the position of an object is called potential energy. Whereas, when the object starts moving potential energy converts to kinetic energy.
Thus, thermal vibrations of particles, our every day activities all are associated with a kinetic energy. Kinetic energy of each body depends on the mass and velocity of the body. The more the mass and velocity more will be the kinetic energy.
To find more on kinetic energy, refer here:
https://brainly.com/question/26472013
#SPJ5
what volume of 0.20 M NaCl contains 10.0 g
Which of the following would happen if Earth's moon were half the size that it is now? O The oceans' tidal variations would be smaller because the Moon would exert less gravitational pull on Earth's oceans. O The oceans' tidal variations would be greater because the Moon would exert less gravitational pull on Earth's oceans. O The oceans' tidal variations would be greater because the Moon would exert more gravitational pull on Earth's oceans. The oceans' tidal variations would be smaller because the Moon would exert more gravitational pull on Earth's oceans. & Previous
Answer: A. The oceans‘ tidal would be smaller because the moon would exert less gravitational pull on earths oceans.
Explanation:
i got it right :)
What does the difference in force depend on?
✨✨What’s 2 similarities and 2 differences between the Earths layers and the atmospheric layers? ✨✨
‼️DONT COPY OFF LINE PLEASE ‼️
Answer:
Differences: Earth's atmosphere has 5 main layers where as atmospheric layers thins out in each higher layer.
Similarities: They both have multiple layers.
Explanation:
Sorry I only have 1 difference and similarity.
Give an example of kinetic energy
Answer: A river flowing at a certain speed comprises kinetic energy as water has certain velocity and mass. The kinetic energy of an asteroid falling towards earth is very large. The kinetic energy of the aeroplane is more during the flight due to large mass and speedy velocity.
Explanation:
Newton's first law is demonstrated in what station?
Answer:
hope this helps!
Explanation:
This law states that a still object will stay still unless a force pushes or pulls it. A moving object will stay moving unless a force pushes or pulls it. Gravity and friction are forces that constantly push and pull the "stuff" on earth. So, when we roll a ball, it slowly comes to a stop.
HELPPP
i’ll give brainly :)))
Answer:
12. 2.9 g= 0.0029 13. 14.7 L = 14700 ml
14. The chemical formula of magnesium hydroxide is Mg(OH)2, and its molar mass is 58.32 g/mol.
Explanation:
HELP! URGENTLY NEEDED! I NEED THIS ANSWER IN 5 MINUTES AND PERSON WHO HELPS GET THE ANSWER RIGHT GETS 25 POINTS!!! PLEASE I AM FAILING THIS CLASS AND NEED SO MUCH HELP!!!!
The coefficient/s will balance the chemical equation CH4 +O2 -------» CO2 + H2O is
a
1, 2, 1, 2
b
2, 1, 1, 2
c
2, 2, 1, 1
d
1, 1, 1, 2
Answer:
hey miss
Explanation:
The coefficients : a. 1,2,1,2
Further explanationGiven
Reaction(unbalanced)
CH4 +O2 -------» CO2 + H2O
Required
The blanced equation
Solution
Give a coefficient
CH4 +aO2 -------» bCO2 + cH2O
Make an equation
C, left=1, right=b⇒b=1
H, left=4, right = 2c⇒2c=4⇒c=2
O, left=2a, right=2b+c⇒2a=2b+c⇒2a=2.1+2⇒a=2
The equation becomes :
CH4 +2O2 -------» CO2 + 2H2O
What is the purpose of a catalyst?
Answer:
option c
Explanation:
as catalyst increases the reaction while activation energy is inversely proportional to rate of reaction, so option c is correct
The purpose of a catalyst to lower the activation energy of a reaction.
What is catalyst?A type of chemical that, without becoming consumed by the process, speeding a chemical reaction or reduce the temperature as well as the pressure required to initiate one. The addition of a catalyst to speed up a reaction is known as catalysis.
What is activation energy?The bare minimum additional energy needed by a reactive molecule to transform into a product is considered as activation energy.
The purpose of a catalyst is to lower the activation energy of a reaction.
Therefore, the correct answer will be an option (C).
To know more about catalyst and activation energy.
https://brainly.com/question/11334504
#SPJ3
Give examples of kinetic energy and how they work.
Answer: The kinetic energy of an object depends on both its mass and velocity, with its velocity playing a much greater role. Examples of Kinetic Energy: ... A baseball thrown by a pitcher, although having a small mass, can have a large amount of kinetic energy due to its fast velocity.
Explanation:
Hope this help
A sample of nitrogen gas contains 8.23 x 10^23 molecules. What is the volume of this sample at STP?
Please show and explain the steps.
Answer:
30.6 L
Explanation:
Given data:
Number of molecules of nitrogen = 8.23×10²³ molecules
Volume occupy at STP = ?
Solution:
Standard temperature = 273.15 K
Standard pressure = 1 atm
One mole of any substance at STP occupy 22.4 L volume.
Number of moles of nitrogen:
1 mole contain 6.022×10²³ molecules.
8.23×10²³ molecules × 1mol / 6.022×10²³ molecules
1.37 mol
Volume of nitrogen:
1.37 mol × 22.4 L / 1 mol
30.6 L
Question 9(Multiple Choice Worth 1 points)
(05.03 LC)
Which of the following stars usually shine with the dimmest of light?
O Dwarfs
O Giants
O Main sequence stars
O Supergiants