What happens during
conduction?
A. The warmer object's particles slows
down the cooler object's particles.
B. The warmer object's particles stops the
cooler object's particles.
C. The warmer object's particles speed up
the cooler object's particles.

Answer:

8 i believe

Explanation:

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the number of neutrons in the given atom is 8.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.

Mass number =number of protons + number of neutrons

Atomic number = number of protons= number of electrons

18  =10 + number of neutrons

number of neutrons=8

Therefore, the number of neutrons in the given atom is 8.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2

Answer:

If the numbers of each type of atom are different on the two sides of a chemical equationExplanation:

Answer:Amplitude in a longitudinal wave

Explanation:Wave amplitude of a longitudinal wave is the distance between particles of the medium where it is compressed by the wave. Wave amplitude is determined by the energy of the disturbance that causes the wave. A wave caused by a disturbance with more energy has greater amplitude.

Answer:

150K is 253.67°F

Explanation:

There is a simple formula to convert from Kelvin to Celsuis;

C° = K - 273.15

Then you would convert Celsuis into Fahrenheit using the formula:

[tex]F = \frac{9}{5}C + 32\\[/tex]

Answer:

Sodium is placed in group 1 of the periodic table of Alkali metals, and has a valence shell with one electron, making them very reactive. When placed in water, it disperses heat and begins to ignite and burn (due to its very reactive nature), resulting compound is hydrogen gas (H2), and a very strong base (Sodium Hydroxide, NaOH) used for cleaning appliances and for neutralizing agents.

Silver is placed on the transitional metal section of the periodic table, not quite reactive but is the most conductible element on the planet, is malleable and ductile. Due to it being costly and its rarity, it's not relied on for computer parts or wires. Silver doesn't actually directly react with water in its liquid state. It does produce hydrogen gas and Silver Oxide when reacting with water vapour.

In short, Sodium and water create new products, while Silver and water (only in water's gaseous form) form different products.

Answer:

Molecules move up the concentration gradient in facilitated diffusion which requires ATP to be used as molecules naturally move from high to low concentration

Explanation:

Answer:

AlCl3 + Fe = Al + FeCl2

Chemical Equation Details aluminum chloride + iron = aluminum + iron(ii) chloride

[tex]\text{Balanced reaction:}\\\\2\text{Al} + 3\text{FeCl}_2 \longrightarrow 3\text{Fe} + 2\text{AlCl}_3[/tex]

The material that has been widely used in casting has been copper. Thus, option C is correct.

Casting has been the process of molding the liquid into a specific shape with the mold. The casting involves the heating of elements and converting them into liquid. The liquid has been poured into the mold and cooling results in the casted material.

The casted material has been selected based on the boiling temperature, cooling temperature, resistivity, cost-effectiveness, and damping ability.

The material that has been consisted of these characteristics has been copper. Thus, copper has been commonly used for casting. Thus, option C is correct.

For more information about casting, refer to the link:

https://brainly.com/question/1253405

Answer:

N2 + H2 --> 2 NH

Explanation:

You need to add 2 to make it correct

Answer:

If the atoms are not identical, the electron distribution is electrons are closer to one atom than the other. This type of bond is called a(n) covalent bond.

Explanation:

Answer:

Technically only AJ got it correct Howie got it wrong because rotting is a chemical not a physical change AJ  was correct becuase he knew what would make the fruit go faster so yes howie would have been right if he got the right kind change.

Explanation:

hope this help

Answer:0.284ib/in 3

Explanation:

[tex]\text{Given that,}\\\\\text{Density of iron, }~ \rho = 7 ~\text{g cm}^{-3} = 7 \times 10^{3}~ \text{kg m}^{-3}\\\\\\\text{Mass, m =14 g =} ~ 14 \times 10^{-3} ~\text{kg}\\\\\\\text{Volume of iron,}~ V = \dfrac{m}{\rho} = \dfrac{14 \times 10^{-3}}{7\times 10^{3}} = 2 \times 10^{-6} ~~ m^3[/tex]

Answer:

maybe i can help for you where the question

Answer:

structure of atom

states of matter

classification of elements and periodicity in properties

thermody namic

Equilibrium

Redox reacation

Answer:

6.02 × 10^23 molecules = 1 mole

5.27 × 10^45 molecules = x

x = 5.27 × 10^45/ 6.02 × 10^23 × 1

= 8.754 × 10^21 mol

I don't know if it's correct but based on the question that was the only way I saw how to work it out

Answer:

North pole-A

South pole- F

Equator- E

Polar Easterlies-C

Prevailing Westerlies-D or B-not sure

Trade Winds-D or B-not sure

Answer:

White being the color and coming in small grains.

Explanation:

Physical properties are something you can clearly see about the object.

Answer:

Hey mate......

Explanation:

This is ur answer....

It was in the lesson, the answer is it is solid and does not conduct electricity.

Physical Properties                                 Chemical Properties

White cubic crystals                                 Do not undergo combustion

Odorless, salty taste                                 Make ionic bonds easily

As solids, they do not conduct electricity  The product of mixing acids and bases.

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

3. Inverse 1. Direct

Explanation:

P- pressure

V - volume

T - temperature

P1*V1 / T1 = P2*V2 / T2 ...... (1)

That's the general gas law with the combined ideas of charles, boyle & lussac.

Whenever you are restricted as "constant" temperature, volume, or pressure...cancel them off of your equation.

in this case 3. is indirectly telling us to cancel the temperature (T).

so we'll be left w P1*V1 = P2*V2

now notice that any relation ship that is multiplied like the one above consists of inversely related quantities. & so we conclude that-

P & V are inversely proportional or have an inverse relationship.

similarly in 1. we'll cancel p off of the general formula (1)

to be left with V1/T1 = V2/T2

also note that quantities involved in division are directly related to each other & hence the answer.

Answer:

I'm pretty sure this doesn't really connect with chemistry much but the answer should be Schedule 1 as stated by the Drug enforcement agency.

Explanation:

Although all puppies are officially considered adult dogs once they reach one year old, puppies continue to grow in height and size while their bones are still developing, which takes anywhere from 6 to 24 months. Their skeletal growth is what determines how tall they will become as adults.

Answer:

unbalanced

Explanation:

because it is REACTing.

It would take 211 hours to plate 28.3 g of silver on a flute.

The equation of the reaction;

Ag^+(aq) + e -----> Ag(s)

We know that 1 F of electricity is required to deposit 107.87 g of Ag. Also 1F = 96500 C

Now;

Since  107.87 g is deposited by 96500 C of electricity

28.3 g is deposited by  28.3 g ×  96500 C/ 107.87 g

= 25317 C

Also;

Q = It

I = current

t = time

25317 C =  2.0 amps × t

t = 25317 C /2.0 amps

t = 12658.5 seconds or 211 hours

Learn more about electrolysis: https://brainly.com/question/12054569

Answer:

Explanation:

Electrolysis equation is:

[tex]Ag1+ + 1e- ------> Ag[/tex]

1 mol of Ag requires 1 mol of electron

1 mol of electron = 96485 C

So,

1 mol of Ag requires 96485 C

let us calculate mol of element deposited:

molar mass of Ag = [tex]107.87 g/mol[/tex]

number of mol of Ag, [tex]n = \frac{mass of Ag}{molar mass of Ag}[/tex]

[tex]n = \frac{28.3}{107.87}\\\\n = 0.2623 mol[/tex]

[tex]total charge = mol of element deposited * charge required for 1 mol\\\\total charge = 0.2623*9.649*10^4\\\\total charge = 2.531*10^4 C[/tex]

Therefore,

[tex]time = \frac{Q}{i}\\\\= \frac{2.531*10^4}{2}\\\\= 1.265*10^4 seconds\\\\= 3.515 hr[/tex]

For more information, visit

https://www.homeworklib.com/qaa/1142722/5-how-long-would-it-take-to-electroplate-a-flute

Answer:

b) (i): 0.91 Amgstroms

(ii): 9.1 × 10^-11 Angstroms

(c): Volume = 20 Angstroms

Explanation:

• Let's first convert the units:

[tex]{ \rm{1 \:nanometre = 1 \times {10}^{ - 9} \: metres} } \\ { \rm{10 \: angstroms = 1 \times {10}^{ - 9} \: metres}} \\ { \rm{1 \: micrometer = 1 \times {10}^{ - 6} \: metres = 1000 \: nm}} \\ \\ { \rm{1 \: {nm}^{3} = 1000 \: {angstroms}^{3} }}[/tex]

Question (b)

[tex]{ \rm{radius = \frac{diameter}{2} }} \\ \\ { \rm{radius = \frac{0.182}{2} }} \\ \\ { \rm{radius = 0.091 \: nm}} \\ \\ { \mathfrak{ answer{ : { \rm{radius = (0.091 \times 10) \: angstroms}}}}} \\ \\ { \rm{radius = 0.91 \: angstroms}}[/tex]

[tex]{ \rm{radius = 0.091 \: nm}} \\ \\ { \rm{radius = 0.091 \times( 1 \times {10}^{ - 9} ) \: metres}} \\ \\ { \rm{radius = 9.1 \times {10}^{ - 11} \: m }}[/tex]

[tex]{ \rm{volume = (0.5 \times 0.2) \: nm \times 0.0002 \: micrometer}} \\ \\ { \rm{volume = 0.5nm \times 0.2nm \times (0.0002 \times 1000)nm}} \\ \\ { \rm{volume = 0.5 \times 0.2 \times 0.2 \: nm {}^{3} }} \\ \\ { \rm{volume = 0.02 \: nm {}^{3} }} \\ \\ { \rm{volume = (1000 \times 0.02) \: angstroms {}^{3} }} \\ \\ { \rm{volume = 20 \: angstroms}}[/tex]

Answer:

136000 J or 136 kJ

Explanation:

Formula

Heat = m * c * deltaH

Givens

m= 0.5 kg

c = 3400 J / (kg * oC)

Deltat = (100oC – 20oC)

deltat = 80oC

Solution

Heat = 0.5 kg * 3400 J/(kg* oC) * 80oC

Heat = 136000 Joules

Heat = 136 kg

Technically there is only 1 place of accuracy.

I think it's metal if its abt science

Answer:

i think metal or glass not sure but i think its metal

Explanation:

Answer:

34.9103 or 34.9 g

Explanation:

Remember Density is a broken heart: m/v.

In this scenario (Let x = # of grams in the sample of gasoline),

D = 0.7198 g/mL = x g / 48.5 mL

So,

(0.7198 g/mL) * (48.5 mL) = x g

x g = 34.9103 = 34.9 g (Accounting for Significant Figures)

1 atom Mg, 2 atoms O and 2 atoms H.

1 + 2 + 2 = 5, so correct answer is C

The change in phase of a substance is called a physical change. The substance C with low molecular attraction needs more energy transferred out and thus its kinetic energy have to be decreased to change from gas to liquid.

Energy can neither be created nor be destroyed. However it can be transferred from one form to the other and thus total energy of a system is conserved.

In gaseous state molecules or atoms are far apart and have minimum intermolecular forces of attraction whereas in liquid state they have medium molecular attraction and are a bit close than they are in gas state.

When a substance changes from gas state to liquid state its molecules condenses and becomes more close to each other forming higher molecular attraction.

The gas B have medium molecular attraction and thus will easily liquified with minimum energy transfer whereas, gas C is of less molecular attraction having higher kinetic energy and thus more have to transfer more energy out to liquify.

To find more about physical changes, refer the link below:

https://brainly.com/question/17931044

#SPJ5