Answer:
30.26 °C
Explanation:
From the question,
Q = cm(t₂-t₁)................ Equation 1
Where Q = Heat, c = specific heat capacity of Cu, m = mass of Cu, t₁ = Initial temperature, t₂ = Final temperature.
Given: Q = 1000 J, c = 0.39 J/g.°C, t₁ = 20°C, m = 250 g
Substitute into equation 1 and solve for t₂
1000 = 250×0.39(t₂-20)
250×0.39(t₂-20) = 1000
97.5(t₂-20) = 1000
(t₂-20) = 1000/97.6
(t₂-20) = 10.26
t₂ = 10.26+20
t₂ = 30.26 °C
Mrs. Franklin decides to use her new aluminum pan to scramble eggs. She wants to determine how much heat energy will be needed to
heat her aluminum pan from 20 degrees celsius to 220 degrees celsius. She obtains the specific heat of aluminum from the reference
table. It lists the specific heat of aluminum as 0.90 N/kg*degrees celsius. The pan has a mass of 0.5 kg. She does the calculation
correctly. Which one of the following is her answer?
Your answer:
0.45 joules of heat energy
O 0.9 kilojoules of heat energy
O 90 kilojoules of heat energy
180 joules of heat energy
Answer:
90 kilojoules of heat energy
Explanation:
I don't really know why this is just the answer to it on my quiz so if someone else can explain.
A 25°C sample of gas has a volume of 5.0 L. What will it’s volume be if it is heated to 50.0°C?
please let me know if the answer is true or false. if false, please tell me what's false about it. the word that they are wondering if it needs to be changed is highlighted
Answer:
false the answer is woody
Explanation:
those are the two types of stems
. If 30.0 grams of copper (II) chloride reacts with 40.0 grams of sodium nitrate, what is the limiting reactant?
Answer:
The limiting reactant is copper (II) chloride
Explanation:
here you go
is saturated fat the same as trans fat?
Answer:
Saturated fat occurs naturally in red meat and dairy products. It's also found in baked goods and fried foods. Trans fat occurs naturally in small amounts in red meat and dairy products. Trans fat can also be manufactured by adding hydrogen to vegetable oil.
Please help, I'm so confused!!!!
Answer:
[tex]\boxed {\boxed {\sf N_2}}[/tex]
Explanation:
Let's examine this reaction, especially the coefficients.
[tex]N_2+3H_2 \rightarrow 2NH_3[/tex]
First of all, remember that reactants are used to make the product. They are found on the left of the arrow usually. Therefore, N₂ and H₂ are the reactants, while NH₃ is the product. We can automatically eliminate NH₃ from our answer choices, because it is simply not a reactant.
Next, look at the coefficients.
N₂ has no coefficient, so a 1 is implied. H₂ has a coefficient of 3.Therefore, for the reaction to work, there must be 1 mole of N₂ and 3 moles of H₂.
We have 3.2 moles of N₂ and 5.4 moles of H₂.
Divide each amount given by the required amount for completion.
3.2 mol N₂/ 1 mol N₂= 3.2 times 5.4 mol H₂/ 3 mol H₂=1.8 timesTherefore, there is enough nitrogen to complete the reaction 3.2 times, but only enough hydrogen for 1.8 times. If everything is completely reacted, we will run out of hydrogen and have excess nitrogen.
Mr. Whiteman has two stock solutions of sulfuric acid (H2SO4) in the supply closet: 12.1 M and 6.0 M. If he wants to make 10.0 mL of a 1.0 M solution, which stock solution makes more sense to use? Justify with two calculations.
Answer:
12.1-M requires less volume of stock solution.
Explanation:
Hello there!
In this case, according to the foundations of dilution processes, it turns out convenient to remember that the moles of the solute before and after the dilution remains the same; for that reason we use the following equation:
[tex]M_1V_1=M_2V_2[/tex]
Relating the initial and final molarities and volumes. Now, it is seen that V2 is 10.0 mL and M2 is 1.0 M, which means that if we solve for V1 for 12.1 M and 6.0 M, we obtain the following volumes:
[tex]V_1=\frac{M_2V_2}{M_1} \\\\V_1^{12.1M}=\frac{1.0M*10.0 mL}{12.1M}=0.826mL\\\\V_1^{6.0M}=\frac{1.0M*10.0 mL}{6.0M}=1.67mL[/tex]
Therefore, since the 12.1-M solution requires less volume of stock solution, it makes sense to use this one as the initial solution.
Best regards!
Just awnser #9#10#11#12 please ❤️ i will mark brainliest and also you get 15 points!
Answer: 9. Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune
10. The reasons for the differences in the surface temperature of terrestrial planets are due to their distance from the sun and the composition of their atmosphere.
11. 93.48 million miles
12. Iron core
Explanation: Hope this helped!! :)
What is PO3 compound name?
Answer:
PHOSPHITE ION is the correct answer.
Explanation:
Hope this helped Mark BRAINLIEST!!!
What are the steps to balance a chemical equation?
Answer:
Step 1: The Unbalanced Chemical Equation. The unbalanced chemical equation is given to you. ...
Step 2: Make a List. ...
Step 3: Identifying the Atoms in Each Element. ...
Step 4: Multiplying the Number of Atoms. ...
Step 5: Placing Coefficients in Front of Molecules. ...
Step 6: Check Equation. ...
Step 7: Balanced Chemical Equation.
Explanation:
Why do people who exercise more produce more carbon dioxide ?
Answer:
When you exercise and your muscles work harder, your body uses more oxygen and produces more carbon dioxide.
Explanation:
Because your muscles are working harder when you exercise, your body requires more oxygen and produces more carbon dioxide.
What is exercise?Exercise is characterized as a physiological movement that maintains or enhances total physical wellness. People who exercise are less likely to get diseases and to maintain a healthy weight. Type 2 diabetes, heart disease, high blood pressure, and weight gain can all be warded off with regular exercise. Leaping, jogging, or lifting weights are examples of exercises that can support bone health.
The lungs both provide the body with oxygen, which gives you energy, and remove carbon dioxide from the system, which is a byproduct of energy production. The heart pumps oxygen-rich blood to the working muscles. Because your muscles are working harder when you exercise, your body requires more oxygen and produces more carbon dioxide.
Thus, because your muscles are working harder when you exercise, your body requires more oxygen and produces more carbon dioxide.
To learn more about exercise, refer to the link below:
https://brainly.com/question/13128077
#SPJ2
what happen when a piece of silver metal is added to the copper sulphate solution
Answer:
Explanation:When silver Ag metal is added to copper sulphate CuSO4 solution, no reaction takes place as silver is less reactive than that of copper and cannot displace copper from its solution. Hence, when a piece of silver metal is added to copper sulphate solution there will be no reaction.
Answer:
There will be no reaction
Explanation:
Therefore, when silver Ag metal is added to copper sulphate CuSO4 solution, no reaction takes place as silver is less reactive than that of copper and cannot displace copper from its solution. Hence, when a piece of silver metal is added to copper sulphate solution there will be no reaction.
Select the correct answer.
What does an atom gain or lose in an oxidation-reduction reaction?
A.
protons
B.
oxygen
C.
neutrons
D.
electrons
Answer:
D The atom gains an electron in an oxidation-reduction reaction.
Calcium carbonate + hydrochloric acid forms copper ___ + water + carbon dioxide
What does it form copper what please help me
Answer:
The answer copper carbonate
Set the Room temp. to -10.0 °C and observe. What is happening?
plzzz i need help on the ASAP no files/links
Answer:
its getting colder
Explanation:
Commercially available concentrated hydrochloric acid is 37.0% w/w HCl. Its density is 1.18g/ml. Calculate the molarity of concentrated HCl?
Answer:
M = 12.0M
Explanation:
Hello there!
In this case, according to the given by-mass percent of HCl, which can be set up in terms of mass of HCl over mass of solution, we can calculate the molarity, by multiplying by the density to get the mL's of solution and further convert to liters. Moreover, the molar mass of HCl (36.46 g/mol) must be also used to calculate the moles, since molar units requires moles of solute and liters of solution as shown below:
[tex]M=\frac{37.0gHCl}{100g\ sln}*\frac{1.18g\ sln}{1mL\ sln}*\frac{1000mL\ sln}{1L \ sln}*\frac{1molHCl}{36.46gHCl}\\\\M= 12.0M[/tex]
Best regards!
In an exothermic the change in enthalpy is usually
Positive, because the potential energy of the reactants is higher than the potential energy of the products
Neutral, because the potential energy of the products and reactants cancel each other out.
Negative, because the potential energy of the reactants is higher than the potential energy of the products
Positive, because the potential energy of the reactants is lower than the potential energy of the products
Answer:
Negative, because the potential energy of the reactants is higher than the potential energy of the products
Explanation:
Exothermic reaction is a reaction in which heat is released to surrounding. This is due to the fact that the heat content of the reactant is higher than the heat content of product thus producing a negative enthalpy change (ΔH) i.e
Enthalpy change = Heat of product – Heat of reactant
ΔH = Hp – Hr = negative
Considering the options given in the question above, the correct answer is:
Negative, because the potential energy of the reactants is higher than the potential energy of the products
What event occurs when the
tension built up along Earth's
plates is released causing one
plate to slip past another?
Answer:
An earthquake
Explanation:
Is biden falling down the stairs funny or is it just me
Answer:
yes it is hilarious
Explanation:
good to find another republican lol
9) What is the density of the gold rock with a mass of 386 grams and has a volume of 20 cubic centimeters?
O 0.193 g/cc
O 193 g/cc
O 1.93 g/cc
19.3 g/cc
Answer:
density= mass/volume
hence density of gold rock
= 386/20
=19.3 g/cc
Chemistry help! Please zoom in to see better
Answer:
82.04g
Explanation:
To solve this problem, you need to find the molar mass of HCl, which is the sum of the molar mass of H plus the molar mass of Cl. The molar mass of H is 1.008g/mol while the molar mass of Cl is 35.45g/mol. Thusly the molar mass of HCl is 36.458g/mol. You have 2.25 moles of HCl, so multiply the number of moles by the molar mass to get the mass in g. In this case it is 2.25mol * 36.458g/mol = 82.04g.
If I helped, a brainliest would be greatly appreciated!
Combustion engines became common in the mid-1800s when people began to use them to power ships, trains, and
machinery in factories. Combustion engines add carbon dioxide to the air, and as a result, carbon dioxide in the
atmosphere increased quickly. How did this change the total amount of energy in the Earth system, and how did this
change happen? How did this affect global average temperature?
I need help please and don’t send the fake link): < just to get points
Answer:
The correct answer is - increased the global average temperature.
Explanation:
Combustion is the process that increases the carbon dioxide in the atmosphere, which results in entering more energy into the Earth system than existed from it. Therefore, the amount of energy increased in the system of the earth or surface of the earth.
The reason behind it is that carbon dioxide trapped and redirects energy back toward the Earth's surface, which is absorbed by Earth's surface and surface increased, and global average temperature increased.
Combustion process increases the global average temperature of the earth by absorbing and emitting the energy revert back to earth.
What is combustion?Combustion is a process exothermic process in which organic molecules burns in the presence of oxygen to produce energy in the form of heat and light and CO₂ gas.
CO₂ gas is a green house gas which traps the energy of the atmosphere and revert back it into the earth surface, due to which temperature of the earth surface and atmosphere increases which results in the elevation of global average temperature.
Hence, combustion increases the global average temperature.
To know more about combustion, visit the below link:
https://brainly.com/question/15246277
Calculate magnetic moment of a divalent ion in aqueous solution, if the electronic configuration is [Ar] 3d5 .
Answer:
5.47 B.M
Explanation:
✓We were given electronic configuration of argon as [Ar] 3d5.
✓This is a divalent ion. It has atomic number of 25.
✓magnetic moment can be calculated using below expresion
√[n(n+2)] .....................eqn(1)
✓ It has 5 unpaired electrons. Then n= 5
✓ [n(n+2)]
✓ substitute the ( n= 5) into eqn(1)
Then magnetic moment= [n(n+2)]
= [ 5(5+2) ]
= 5.47BM
How many grams of H2O is created from 60 grams of O2?
[2 H2 + O2 —> 2 H2O]
Answer:
67.5 gm H2O
Explanation:
2 H2 = 4 gm
O2 = 32 gm
2 H20 = 36 gm
so 32 gm O2 results in 36 gm H20
32/36 = 60/x x = 67.5 gm
2. How many moles of hydrogen are produced from the reaction of 3.86 moles of zinc with an excess of
hydrochloric acid?
Answer:
as per given balanced equation one mole Zn produces 1mole Hydrogen
when reacted with excess acid.
So 3 moles Zn will give 3moles Hydrogen
Explanation:
According to the balanced chemical equation, one mole of Zn produces one mole of hydrogen . Therefore, 3.86 moles of Zn metal will produce 3.86 moles of hydrogen gas.
What is mole ratio ?Mole ratio refers to the ratio of the number of moles of one substance in a chemical reaction to the number of moles of another substance in the same reaction.
It is derived from the balanced chemical equation for the reaction, which indicates the relative amounts of each substance involved in the reaction.
Mole ratio is important in stoichiometry, which is the study of the quantitative relationships between reactants and products in a chemical reaction.
The given chemical reaction is written as follows:
Zn + 2 HCl ⇒ ZnCl₂ + H₂
According to the balanced chemical equation, one mole of Zn produces one mole of hydrogen . Therefore, 3.86 moles of Zn metal will produce 3.86 moles of hydrogen gas.
Find more on mole ratio :
https://brainly.com/question/15288923
#SPJ2
Nitrous acid is classified as an Arrhenius acid because HNO2 contains
1. OH-ions
2. 02-ions
3. NO2-ions
4. H+ ions
4) H+ions is your answer , good morning , have a great day ahead.
Most of the matter making up the earth is composed of
A. gases
B. compounds
C. mixtures
Most of the matter making up earth is composed of compounds. I think
the atomic number is the number of protons, but in a neutral atom it is also the number of _____. A. none of these B. electrons C. neutrons D. nuclei
Answer:
Electrons
hope it helps
Lysol Power Toilet Bowl Cleaner contains 9.5% hydrochloric acid. Explain why this would be necessary to clean toilet bowls that have white or rust-coloured deposits
Answer:
The acid will absolutely remove the hard water deposits that are trapping the stains. The longer it soaks, the less you have to scrub. It works for hard water stains, limescale, and rust!
Explanation:
hope this helped you out.
PLEASE HELP ME OUT. I AM REALLY LOST AND I JUST NEED THIS LAST QUESTION I WILL BE GRATEFUL AND WILL GIVE BRANLIEST!
PLEASE HELP ME OUT. I AM REALLY LOST AND I JUST NEED THIS LAST QUESTION I WILL BE GRATEFUL AND WILL GIVE BRANLIEST!
Explanation:
—COOH and —NH₂
Carboxylic Acid and Amino group
-TheUnknownScientist