Answer:
D
Explanation:
I just did it on Edge
Answer:It’s D
Explanation: It was in my test
When Lithium chloride is dissolved in water, there is a steep rise in the temperature of the water. Based on the evidence, is the dissolution of lithium chloride endothermic, exothermic, or neither? Explain.
Answer:
When some LiCl is dissolved in water, the temperature of the water increases. This means that: (A) the strength of the intermolecular forces between the water molecules is stronger than the bond energy within the LiCl lattice.
Explanation:
When Lithium chloride is dissolved in water, there is a steep rise in the temperature of the water. Based on this evidence, the dissolution of lithium chloride is exothermic.
What is an Exothermic reaction?An exothermic reaction may be defined as a type of reaction in which energy is liberated as a product in the form of light or heat. For these types of reactions, the overall standard enthalpy change ΔH⚬ is negative. It is one of the thermodynamic processes other than endothermic.
In the reaction, lithium intensely reacts with water in order to form lithium hydroxide and highly flammable hydrogen which liberated energy and leads to the steep rise in the temperature of the product compounds. This enhancement in the temperature is accurate evidence of an exothermic reaction.
Therefore, on the basis of the evidence that the reaction of lithium chloride in water causes a steep rise in the temperature of the water represents an exothermic reaction.
To learn more about Exothermic reaction, refer to the link:
https://brainly.com/question/2924714
#SPJ6
11) How many moles of CO2 can be produced from
5.0 moles of O2?
Answer:
3.6 moles
Explanation:
5.0moles produce 44g/x will produce 32g the answer is a3.6moles
Which of the following will decrease the pressure of a gas in a closed container?
A. increasing the number of molecules
B. increasing the amount of light
C. increasing the temperature
D. increasing the volume
please answer asap thank you :))
Increasing the number of molecules will decrease the pressure of a gas in a closed container. Hence, option A is correct.
What is pressure?Pressure, in the physical sciences, the perpendicular force per unit area, or the stress at a point within a confined fluid.
An increase in the number of gas particles in the container increases the
frequency of collisions with the walls and therefore the pressure of the gas.
If the temperature decreases the pressure will also decrease.
Temperature is a measure of kinetic energy. When the temperature inside the container decreases the kinetic energy will also decrease.
Hence, option A is correct.
Learn more about the pressure here:
https://brainly.com/question/356585
#SPJ2
How many hydrogen atoms are in the compound represented by the following bond-line drawing?
ОН
Answer:
Theres no drawing
Explanation:
Show drawing
Skeletal structural diagram and bond-line drawing are similar;
Parts of the question appear missing: The number of hydrogen atoms in the attached example bond-line drawing is 6 hydrogen atoms
The reason the above value is arrived at for the attached example bond-line diagram is as follows;
A bond-line drawing is the diagram showing the molecular structure of a compound, such that covalent bonds within the molecule are represented by lines with the number of lines indicating the number of covalent bonds.
A single covalent bond is represented by one line, double bonds by two lines while three parallel lines represents a triple bond.
In bond-line drawing, the lines symbolically infer the carbon to carbon bonds while the bonds to the hydrogen atoms are implied noting that each carbon has four covalent bonds. Hydrogen atoms attached to other heteroatoms are indicated with an H.
The number of hydrogen shown in the example diagram can be found by noting that the number of covalent bonds between the carbon atoms are three, therefore, the atom of the fourth bond not shown with a line is to a hydrogen atom
There are six such carbon atoms, one of which is attached to an oxygen atom, which gives five hydrogen atoms located on the ring
There is one more hydrogen atom attached to the oxygen in the hydroxyl group, the total number of hydrogen is therefore;
5 hydrogen on ring + One hydrogen in the hydroxyl group = 6 hydrogen atoms
Learn more about bond-line drawing here:
https://brainly.com/question/13265901
What is a personal factor of resilience?
A. Feeling of belonging
B. Family and friends
C. Genetics
D. Coping Mechanisms
Answer:
B
Explanation:
B is a personal factor of resilience
The photograph shows one of the boats in a science club's toy boat race. All the boats were powered by identical
rubber bands. Judges used stopwatches to time how long each rubber band took to unwind. The table shows some
of the data the judges collected.
Boat
Time
(5)
Acceleration
(m/s)
N
1.6
1.4
1.1
Mass of
Boat (kg)
0.125
0.116
0.130
0.118
P
Penywise/Dreamstime.co
Q
1.5
1.2
2.1
1.0
1.8
R
Which boat experienced the greatest unbalanced force?
Answer:
Boat p
Explanation:
Answer:
boat p
Explanation:
2. The boiling point of a solution containing 6.4 g of the hormone adrenaline in 360 g of
CCl4 is 0.49 K higher than the boiling point of pure CC14. Calculate the molar mass of
adrenaline. (K = 5.02 kg K/mol).
Answer:
MM = 182.13g/mol
Explanation:
Hello!
In this case, since the boiling point elevation is computed via:
[tex]\Delta Tb=i*m*K[/tex]
Thus, since adrenaline is nonionizing, we can compute the molality at first instance:
[tex]m=\frac{\Delta Tb}{i*K}=\frac{0.49K}{1*5.02kg\frac{K}{mol} } \\\\m=0.0976mol/kg[/tex]
Now, we compute the the moles of adrenaline in 360 g (0.360 kg) of CCl4:
[tex]n=0.0976mol/kg*0.360kg\\\\n=0.0351mol[/tex]
Finally, the molar mass:
[tex]MM=\frac{6.4g}{0.0351mol}\\\\MM=182.13g/mol[/tex]
Best regards!
Physical or Chemical change?
Answer: Chemical Change
Explanation:
because it probably doesnt change the physical anatomy of the object only the atoms/ molecule relations
pertain to the following class, Point:
public class Point {
private double x;
private double y;
public Point() {
this (0, 0);
}
public Point(double a, double b) {
/* missing code */
}
// ... other methods not shown
}
Which of the following correctly implements the equals method?
public boolean equals(Point p) {
return (x == p.x && y == p.y );
}
public void equals(Point p) {
System.out.println(x == p.x && y == p.y);
}
public void equals(Point p) {
return (x == p.x && y == p.y );
}
public boolean equals(Point p) {
return (x == Point.x && y == Point.y);
}
public boolean equals(Point p) {
System.out.println(x == p.x && y == p.y);
}
_______________________
The default constructor sets x and y to (0, 0) by calling the second constructor. What could be used to replace /* missing code */ so that this works as intended?
a = 0;
b = 0;
this (x, y);
this(0, 0);
x = a;
y = b;
a = x;
b = y;
_____________________
Which of the following correctly implements a mutator method for Point?
public double getX() {
return x;
}
public void setCoordinates (double a, double b) {
x = a;
y = b;
}
None of the items listed.
public double getX() {
return a;
}
public void setCoordinates (double a, double b) {
Point p = new Point(a,b);
}
b = 0;
this (x, y);
this(0, 0);
x = a;
y = b;
a =x
This above solution is just according to the public boolean equals(Point p) { return (x == p.x && y == p.y ); and public void equals(Point p) { System.out.println(x == p.x && y == p.y);}
What is public void?An abstract class contains a pure virtual function. Pure virtual class cannot be instantiated but it can be subclassed and the subclass can provide an implementation of the function.
A virtual function declaration in the class is preceded by the virtual keyword. For example, virtual void print();
A pure virtual function declaration is followed by '=0;'
public: virtual void print()=0;
The main method header is written as public static void main(String[] args). A main method is something that is required in Java. You must have at least one class with a method named main. In Java, main is a static method, which means that it is part of its class but not parts of objects.
Therefore, This above solution is just according to the public boolean equals(Point p) { return (x == p.x && y == p.y ); and public void equals(Point p) { System.out.println(x == p.x && y == p.y);}
Learn more about System.out.println on:
https://brainly.com/question/19467372
#SPJ5
Here’s the answers I wasn’t asking a question hehe!Subtract the mass of the filter paper (0.27g) from the mass of the paper and copper (0.98 g). Record the difference in the data table as the amount of copper.
You already converted mass to moles for the reactants. Now convert mass to moles for the product, copper
all for edge
ANSWERS!!!
help me please i do not understand
Answer:
1 g/cm3
Explanation:
The formula for density is mass/volume
The mass is 100 g and the volume is 100 cm3
100 g/100 cm3=1 g/cm3
How to Balance __MgF2 + __Li2CO3 + __ LiF
A reversible reaction is said to have reached equilibrium when which of the following conditions is established?
The given question is incomplete. The complete question is:
A reversible reaction is said to have reached equilibrium when which of the following conditions is established?
a. concentration of reactants and products are equal
b. opposing reactions cease
c. speeds of opposite reactions become equal
d. temperature of opposite reactions become equal
Answer: c. speeds of opposite reactions become equal
Explanation:
Equilibrium state is the state when reactants and products are present but the concentrations does not change with time.The state of equilibrium refers to the dynamic state as both forward and backwad reactions continue.
For a chemical equilibrium reaction, equilibrium state is achieved when the rate of forward reaction becomes equals to rate of the backward reaction.
Thus at chemical equilibrium, the amount of product and reactant remains constant because the rates of the forward and reverse reactions are equal.
I’ll give you a lot of points and mark you brainlist if you awnse all 3
Answer:
Magma
Volcanic glass
Granite and pumice
Explanation:
Answer:
Magma,
Volcanic Glass,
Granite and Pumice,
Lava
Explanation:
Which bond would require more energy to break apart? (Short bond or Long bond). Explain
a) longer bond. because the charges are further apart
b) shorter bond. because the charges are closer together
c) shorter bond. because the charges are both positive
d) longer bond. because the charges are closer together
Answer:
shorter bond, because charges are close apart
Explanation:
shorter the bond length more is the energy required to break the bond for example if you take three pencils of different sizes one longer One medium sized One Shot sized if you try to break them the longer pencil will break much faster than the other two because the greater the length the lesser the strength the lesser energy you need to apply to break them apart ...
hope you understand
Potassium nitrate, bKNO3 , is 38.7% potassium by mass. If you have 300 grams of KNO; how many grams of potassium can you extract from it?
Mass of Potassium : 116.1 g
Further explanationGiven
38.7% potassium in Potassium nitrate
300 g of KNO3
Required
mass of potassium
Solution
%mass of element = (mass of an element in 1 mole of compound/mass of 1 mole compound) x 100%
mass of K(potassium) in 300 g KNO3 :
= 38.7% x 300 g
= 116.1 g
When going down a slope on a roller
coaster, does your stomach actually
move up?
Answer:
yes
Explanation:
due to gravity &hggggggggg%ggghhbvvvghh
As human populations grow, it becomes more important to use renewable sources of energy Which of the following objects uses energy from a renewable source?
a stove that is powered by natural gas
a refrigerator that runs on solar power
a lantern that burns oil from beneath Earth's surface
a foaster that uses electricity from a coal-burning power plant
Explanation:
Moreover, increasing use of fossil fuels also causes serious environmental problems. Hence, there is a pressing need to use renewable energy sources like solar energy, wind, tide, biomass and energy from waste material. (i) it reduces the dependence on fossil fuels for energy. (ii) they donot produces pollution.
The total age of 5 children aged 3 years is 50 years. Find the age of the youngest and oldest child?
Answer: See explanation
Explanation:
Here's the correct question:
The total ages of 5 children born at the intervals of 3 years each is 50 years. Find the age of the youngest and the oldest child.
From the information given, we can then make the following assumption with regards to their ages.
First child = y
Second child = y + 3.
Third child = y + 6
Fourth child = y + 9
Fifth child = y + 12
Therefore, y + y+3 + y+6 + y+9 + y+12 = 50
5y + 30 = 50
5y = 50 - 30
5y = 20
y = 20/5
y = 4
Youngest child = 4 years
Oldest child = y + 12 = 4 + 12 = 16 years
what happens when hydrogen gas is passed over hot ferric oxide
Answer:
When hydrogen is passed over hot ferric oxide (FeO) hydrogen reacts with oxygen present in the compound and forms water (H2O) and pure Iron
Explanation:
Answer:When hydrogen gas is passed over hot copper oxide, the black coating on the surface turns brown as the reverse reaction takes place and copper is obtained.
Explanation:
The proper dosage of a certain medication is 0.50 mg per kilogramof of patient weight. The medication is the Spence in a liquid that contains 350.0ug of medication per mL of liquid. What volume of liquid medication should be given to a 183 Ib patient. (1kg= 2.204 lb)
Answer:
118.61 mL.
Explanation:
Hello!
In this case, since we know the concentration in the medication:
[tex]\frac{350.0\mu g}{1mL}[/tex]
Now, since there are 0.50 mg of the medication per kilogram of patient, we can compute the volume as shown below for a 183-lb patient:
[tex]183lb*\frac{1kg}{2.204lb}* \frac{0.50mg}{1kg} *\frac{1000\mu g}{1mg} *\frac{1mL}{350.0\mu g} =118.61mL[/tex]
Best regards!
PLEASE HELP ASAP! GIVING OUT BRAINLIEST PLEASE PLEASE HELP
Name a mixtures of at least 3 items each and how you would separate them. Explain why each of the step would work. Do not use any of the items mentioned in the previous question. (which is salt, sand, water, and iron)
Answer:
That means we do not need to use chemical reactions to separate them. ... The one liquid component in milk is water, and the other is fatty oil. ... Identify the type of substances (solid, liquid or gas) that are mixed in each
Explanation:
Answer:
[tex] \huge \sf \colorbox{pink}{hey \: there}[/tex]
Explanation:
The mixture of clay or sand with water is muddy. The small clay particles become suspended in the water. This kind of mixture is called a suspension. Suspensions are opaque; that means they are cloudy and we cannot see through them very well.
WORTH 18 POINTS! MY LIFE DEPENDS ON THIS ANSWER!!!
Which compound listed below is most likely to have to following properties?
-solid at room temperature
- high melting points
-solble in water
-conductive when dissolved
1.sodium chloride
2.carbon monoxide
3.nitrogen trifluoride
4.none of these compounds could have all of the properties listed
Answer:
1.sodium chloride
Explanation:
because the others dont have all the listed properties
A solution is prepared by dissolving 10.6 g sodium carbonate in enough water to produce
500.0 mL solution. What is the molarity of sodium carbonate in the solution?
Answer:
0.2mol/dm³
Explanation:
Given parameters:
Mass of Na₂CO₃ = 10.6g
Volume of solution = 500mL
Unknown:
Molarity of solution = ?
Solution:
The molarity of a solution can be determined using the expression below:
Molarity = [tex]\frac{number of moles }{volume}[/tex]
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of Na₂CO₃ = 2(23) + 12 + 3(16) = 106g/mol
Number of moles = [tex]\frac{10.6}{106}[/tex] = 0.1mol
Convert mL to dm³;
500mL will give 500 x 10⁻³dm³or 0.5dm³
So;
Molarity = [tex]\frac{0.1}{0.5}[/tex] = 0.2mol/dm³
True or False Weather is the condition or earth's atmosphere at a certain place and time.
Answer:
True
Explanation:
Weather is short term, climate is over the long term
Answer:
true, different weather patterns are found all around the world at different times, there could be a hurricane in the gulf of mexico and as a result of the storm tornadoes could break out in texas
Explanation:
1. What is the molar mass of Al2S3?
Answer:
150.17 g/mol
Explanation:
Which part of the atom was discovered last?
Answer: The nuetron was
Explanation: sorry is this is incorrect but im
99% its right
Fresh milk has a pH of 6.
How do you think the pH
would change as it became
sour? Explain your answer.
Many popular brands of toothpaste contain about 1.00 mg of fluoride per gram of toothpaste. The fluoride compound that is most often used in toothpaste is sodium fluoride, NaF, which is 45% fluoride by mass. How many milligrams of NaF are in a 250.0 g tube of toothpaste
Answer:
Mass of NaF in 250 g tube of toothpaste = 100 mg of NaF
Explanation:
Mass of fluoride per gram of toothpaste = 1 mg
From the given data, the fluoride compound that is most often used in toothpaste is sodium fluoride, NaF, which is 45% fluoride by mass, mass of sodium fluoride per gram of toothpaste can be determined as follows:
1 mg of fluoride per gram of toothpaste = 45% total mass of NaF per gram of toothpaste
100% mass of NaF in toothpaste = 100/45 * 1 mg = 2.22 mg of NaF.
Therefore, mass of NaF per gram of toothpaste is 2.22 mg.
The mass of NaF in 250 g of toothpaste is then calculated below:
In 250 g of toothpaste, mass of NaF = 250 * 2.22 mg = 99.9 mg of NaF
Determine the mass (in g) of a substance, with a density of 2.26 g/mL, that occupies 350.0 mL.
Answer:
m = 79.1 grams
Explanation:
Given that,
Density, d = 2.26 g/mL
Volume occupies, V = 35 mL
We need to find the mass of the substance. We know that the density of an object is equal to the mass per unit volume. So,
d = m/V
[tex]m=d\times V\\\\m=2.26\ g/mL\times 35\ mL\\\\m=79.1\ g[/tex]
So, the mass of the substance is 79.1 grams.