What are the two types of force

Answers

Answer 1

Answer:

Forces can be divided into primarily into two types of forces:

Contact Forces. Non-contact Forces.

Explanation:


Related Questions

An ammeter has azero offset error This fault will affect

Answers

Answer:

An ammeter has a zero offset error. This fault will affect. neither the precision nor the accuracy of the readings. only the precision of the readings.

The accuracy of the present measurement will be impacted by an ammeter's zero offset inaccuracy, but the precision of the measurement will not change.

What is resistance?

Resistance is the obstruction of electrons in an electrically conducting material.

                                                                                         

voltage = current ×resistance

How accurate measurement or reading is may be determined by its accuracy. The measurements will be off because of zero inaccuracy.

Thus, The precision of the measurement would not alter if an ammeter made a mistake with its zero offsets, but the accuracy of the current measurement would be decreased.

To learn more about resistance, refer to the link;

brainly.com/question/14547003

#SPJ2

.
A distance-time graph indicates that an object travels 2 m in 2 s and then travels another 80 m during the next 40 s.

What is the average speed of the object?

Answers

Answer:

Explanation:distance-time =speed

a,V =s/t

V=2m/2s

V=1m/s

b,v=s/t

V=80m/40s

V= 2m/s

The average speed is 2m/s

How is probability used in blood typing

Answers

Blood Type O AB

Probability 0.45 0.04

Suppose you want to make the demonstration more dramatic by attracting as much hair as possible with the balloon. Which of the following is the best choice to accomplish your goal? A. Decrease the electric force by holding the balloon closer to the hair. B. Increase the electric force by rubbing the balloon for a longer period of time. C. Decrease the electric force by using a larger balloon. D. Increase the electric force by holding the balloon farther away from the hair.

Answers

Answer:

B. Increase the electric force by rubbing the balloon for a longer period of time.

Explanation:

URGENTLY NEED HELP

This is a 2 part question

42) You pull downward with a force of 28 N on a rope that passes over a disk-shaped pulley of mass 1.2 kg and radius 0.075 m. The other end of the rope is attached to a 0.67-kg mass. (a) Is the tension in the rope the same on both sides of the pulley? If not, which side has the greater tension? (b) Find the tension in the rope on both sides of the pulley.

Answers

Answer:

The net force on the hanging mass is thus

2 T Mg     18 6.6 N 11.4 N

, enough to accelerate it upward at

17 m/s2

. The angular acceleration of the pulley is thus

   

2 2

Explanation:

The tension in the rope on both sides of the pulley 20.21N.

To solve this problem, we'll need to consider the forces acting on both sides of the pulley and apply Newton's second law of motion. Let's break it down step by step:

(a) Is the tension in the rope the same on both sides of the pulley?

No, the tension in the rope is not the same on both sides of the pulley. The side with the greater mass attached will experience a greater tension in the rope.

(b) Find the tension in the rope on both sides of the pulley:

Calculate the gravitational force on each mass:

Gravitational force on the pulley: Fpulley = mpulley * g, where mpulley is the mass of the pulley and g is the acceleration due to gravity (approximately 9.8 m/s²).

Gravitational force on the hanging mass: Fhanging = mhanging * g, where m_hanging is the mass of the hanging mass.

Calculate the net force on the pulley:

Net force on the pulley is the difference between the tension forces on either side: Fnet = TLeft - Tright.

Apply Newton's second law to the pulley:

For the pulley, Fnet = mpulley * a, where a is the acceleration of the pulley. Since the pulley is assumed to be massless, we can use the relationship a = α * r, where α is the angular acceleration and r is the radius of the pulley.

Use the relationship between linear acceleration and angular acceleration:

α = a / r.

Equate the torque due to the tension to the moment of inertia times the angular acceleration:

τ = I * α, where τ is the torque, I is the moment of inertia of the pulley, and α is the angular acceleration.

Substitute the expression for α and solve for the net tension:

Tnet = (τ / r) = (I * α) / r = (1/2 * mpulley * r² * α) / r = (1/2 * mpulley * r * a).

Now, substitute the expression for a from step 3 and solve for the net tension:

Tnet = (1/2 * mpulley * r * α) = (1/2 * mpulley * r * (a / r)) = (1/2 * mpulley * a).

Substitute the expression for a from step 2 (Fnet = mpulley * a) and solve for the net tension:

Tnet = (1/2 * Fnet).

Now, you can find the tensions on each side of the pulley:

Tleft = Tnet + Fhanging

Tright = Tnet - Fpulle

To know more about tension

https://brainly.com/question/16943376

#SPJ2

8th grade science !
can someone help me with trying to understand this question for my homework especially how to understand the graph and use that for my evidence and help me give an idea of how should I write the evidence and reasoning?​

Answers

Answer:

for reasoning you could put -> the line is at the top at the left handed sided of the chart (also the beginning) slopes down towards the very bottom right handed side of the chart, symbolising less force as distance goes.

25.Figure 22.22 shows a plot
of potential versus position
along the x-axis. Make a plot
of the x-component of the
electric field for this situation.

Answers

The relationship between the potential and the electric field allows to find the results for the value of the electric field as a function of the distance is:

In the attachment we see the graph of the electric field as a function of distance.

Electric potential is defined by the change in potential energy of a test charge between two points, between the value of the test charge.

          dV = - E . ds

          E = [tex]- \frac{dV}{ds} \ \hat s[/tex]  

Where the bold letters indicate vectors, V is the potential difference, E the electric field and s the path.

Let's apply this expression for each section of the given graph:

1) section from x₀ = 0 to x_f = 2 m, the potential is V₀ = 2 V is constant.

  The derivative of a constant is zero.

        E = 0

2) Section between x₀ = 2 and x_f = 4 m, the potential varies linearly from V₀ = 2 v to V_f = -2 V.

We look for the equation of the line.

       V-V₀ = m (x- x₀)

We carry out the derivative.

      E = - m i ^

The slope (m) is:

       [tex]m= \frac{V_f - V_o}{x_f- x_o}[/tex]  

Let's calculate.

       [tex]m= \frac{-2 -2}{4-2} = \ -2 \ V/m[/tex]  

Let's substitute.

       E =  [tex]2 \hat i \ V/m[/tex]  

         

3) From x₀ = 4 to x_f = 4.5 m, the potential varies from V₀ = -2 to V_f = 0.

We look for the equation of the line and we derive.

      E = - m i ^

Let's  substitute.

      [tex]m = \frac{0-(-2)}{4.5-4} = \ 4 V/m[/tex]  

    E = - 4 [tex]\hat i[/tex] V / m

4) From x₀ = 4.5 m to x_f = 6m.  The potential is constant and the derivative of a constant is zero.

      E = 0

5) From x₀ = 6m to x_f = 8 m, the potential changes linearly from v₀ = 0 to V_f = 1 V

We look for the equation of the line and we derive.

       E = - m i ^

       [tex]m = \frac{1-0}{8-6} = \ 0.5 \ V/m[/tex]  

      E = - 0.5 [tex]\hat i[/tex] V/m

6) From x₀ = 8m to x_f = 9m, the potential changes linearly from V₀ = 1 V to V_f = -1.

We look for the equation of the line and we derive.

       E = - m i ^

       [tex]m = \frac{-1-1}{9-8} = \ -2 \ V/m[/tex]

Let's substitute.

       E = 2 [tex]\hat i[/tex] V/m

7) From x₀ = 9m to x_f = 10 m, the potential changes linearly from V₀ = -1 V to V_f = -2 V

     

We look for the equation of the line and we derive.

       E = - m i ^

       [tex]m = \frac{-2+1}{10-9} = \ -1 \ V/m[/tex]

Let's substitute.

       E = 1 [tex]\hat i[/tex]  V/m

In the attachment we can see these Electric fields as a function of distance.

In conclusion, the relationship between the potential and the electric field we can find the results for the value of the electric field as a function of the distance is:

In the attachment we see the graph of the electric field as a function of distance.

Learn more about the electric field here:  brainly.com/question/14306881

An airplane accelerates from rest down a runway at 9.50 m/s2 for 29.3 seconds when it
takes off. What is the distance traveled while taking off?

Answers

Answer:

Explanation:

s = ½at²

s = ½(9.50)(29.3²) = 4,077.8275

s = 4080 m

when rounded to the three significant digits of the question numerals.

A wire that is 1.0 m long with a mass of 90 g is under a tension of 710 N. When a transverse wave travels on the wire, its wavelength is 0.10 m. What is the frequency of this wave? ​

Answers

Answer:

890 Hz

I hope you liked my answer. Thank You!

Select the correct answer. Chloe is playing the flute some distance away from a crowd. If the atmospheric temperature is 15°C, what is the speed of the sound traveling from the flute? A. 340 meters/second B. 330 meters/second C. 320 meters/second D. 310 meters/second E. 300 meters/second

Answers

Answer:

A. 340 meters/second

I think this is the right answer.

An Astronaut lands on an Earthlike planet and drops a small lead ball with a mass from the top of her spaceship. The point of release is 25 m above the surface of the planet and the ball takes 5 s to reach the ground. The astronaut's mass is 80 kg. Astronaut weight on the planet is

PLEASE NO LINKS, REAL ANSWERS DON'T WASTE TIME.

Answers

First we have to find out the gravity on that planet. We use Newton second equation of motion. It is given as,

s = ut +(gt^2)/2

Distance s = 25m

Time t = 5 s

Velocity u = 0

By putting these values,

25 = 1/2.g.(5)²

g = 2

So the gravity on that planet is 2. Lets find out the weight of the astronaut.

Mass of the astronaut on earth m = 80 kg

Weight of astronaut on earth W = mg = (80)(9.8) = 784 N

Weight of astronaut on earth like planet = (80)(2) = 160 N

x = 160N

14. Earthworms are crucial for forming soil. As they search for food by digging tunnels,
they expose rocks and minerals to the effects of weathering. Over time, this process
creates new soil. Worms are not the only living things that help to create soil. Plants
also play a part in the weathering process. As the roots of plants grow and seek out
water and nutrients, they help to break large rock fragments into smaller ones. Have
you ever seen a plant growing in a sidewalk? As the plants grows, its roots spread into
tiny cracks in the sidewalk. These roots apply pressure to the cracks, and, over time,
the cracks become larger, ice wedging can occur more readily. As the cracks expand,
more water can flow into them. When the water freezes, it expands and presses against
the walls of the cracks, which makes the cracks larger. Over time, the weathering
caused by water, plants, and worms help to form soil. QUESTION: Ice wedging, as
described in the passage, is an example of which of the following?
A mechanical weathering
B. Oxidation
C. chemical weathering
D. Hydrolysis

Answers

Ice wedging, as described in the passage, is an example of mechanical

weathering.

Mechanical weathering is also known as physical weathering and it

involves the breaking of rock into smaller particles without causing changes

in the chemical properties.Mechanical weathering is usually carried through

physical processes such as freezing and thawing etc.

In this scenario, we were told that water freezes, expands and presses

against the walls of the crack thereby breaking into smaller parts which is a

physical process hence mechanical weathering being present.

Read more about Mechanical weathering on https://brainly.com/question/458304

Transverse waves move particles back and forth along the same direction in which the waves travel.
True false question.
True
False

Answers

Answer:

False, I am pretty sure.

Explanation:

Transverse waves are always characterized by particle motion being perpendicular to wave motion. ... As a sound wave moves from the lips of a speaker to the ear of a listener, particles of air vibrate back and forth in the same direction and the opposite direction of energy transport.

Suppose a bulldozer is being hauled at 50 km/h to a construction site on the back of a flatbed truck. From which reference point would the bulldozer not appear to be moving?

Answers

Answer:

from someone watching the bulldozer from the cab of the truck or from elsewhere on the flatbed.

Explanation:

When a 1 is on the input of an inverter, what is the output?​

Answers

Answer:

When the input to an inverter is high (1) the output is low (0); and when the input is low, the output is high.

True or False. Abraham and Sarah were in agreement regarding God's command to sacrifice Isaac.

Answers

Answer:

Explanation:

Not in Genesis. The proposed sacrifice of Isaac was all Abraham's doing. Sarah was not present and could not, therefore offer any input. It might have been covered in other Jewish writings, but it is not recorded in Genesis.

Since the book most widely used by Everyone is the Bible, I would answer false.

Which type of muscle cell can have multiple nuclei

Answers

Answer:

Skeletal Muscle cells

Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.

Answer:

skeletal muscle cells can have multiple nuclei

Explanation:

This is because they are formed from the fusion of embryonic myoblasts.

identify the origins of breakdown when using a spectrum analyzer

Answers

Four regions of the electromagnetic spectrum that astronomers use when observing objects in the space are the following enumerated answers.

1. First is Ultraviolet

2. Next is Infrared

3. Then the radio

4. Lastly the Visible lights.

These are the answers to the problem.

The ability to do work and cause change is called

Answers

Answer:

I am pretty sure it is called energy.

The answer is energy, when you work on an object some of your energy is transferred to that object with that being said work is the transfer of energy.

2. Define Lightning conductor. How does it work?

Answers

In Building, there are a host of protective devices that are installed to protect lives and properties, one of them is the Lightning Conductor that  a metal rod mounted on a structure and intended to protect the structure from a lightning strike. It works on the principle of induction

Principle of Operation of Lightning Conductor

The lightning conductor works on the principle of induction:

When a charged cloud passes by the building hosting the Lightning conductor, it gets a charge opposite to that of the cloud through the process of induction. They are Typically made from copper material.

Most Lightening conductors are made from copper materials.

Learn about Lightning Conductor:

https://brainly.com/question/2824044

The gradual increase in activity over time is called

Answers

Answer:Progression is the way in which an individual should increase the load. It is a gradual increase either in frequency, intensity, or time or a combination of all three components.

Explanation:

the gradual increase in activity over time is called progression

Using the figure shown, if I₃= 1.17 A, then (I₁ , I₂) A is:

a- (3.17 , 2.00)
b- (1.33 , 0.17)
c- (1.67 , 0.50)
d- (1.27 , 0.10)

Answers

The value of the current in each arm of the circuit is given by Kirchhoff's

Rules.

The correct option for (I₁, I₂) is; b-. [tex]\underline{(1.33, \ 0.17)}[/tex]

Reasons:

By Kirchhoff's junction rule, we have that the sum of current at a junction is given as follows;

[tex]\displaystyle \mathbf{ \sum \limits_{k = 1}^ n I_K} = 0[/tex]

Which by the direction of the currents in the given circuit diagram, we have;

I₁ - (I₃ + I₂) = 0

Therefore;

I₁ = I₃ + I₂

According to Kirchhoff's loop rule theory, we have;

[tex]\displaystyle \mathbf{\sum \limits_{k = 1}^ n V_K} = 0[/tex]

In the loop having the 2 Volts emf., we have;

-I₃·R₁ + 2 + I₂·R₂ = 0

I₃ = 1.17 A

R₁ = 2 Ω

R₂ = 2 Ω

Which gives;

-1.17 × 2 + 2 + I₂×2 = 0

I₂ × 2 = 2.34 - 2 = 0.34

I₂ = 0.34 ÷ 2 = 0.17

I₂ = 0.17 A

From the loop having the 7 Volts emf. we have;

7 - 0.17×2 - I₁ × 4 - I₁ × 1 = 0

Which gives;

7 - 0.34 - 5·I₁ = 0

5·I₁ = 7 - 0.34 = 6.66

I₁ = 6.66 ÷ 5 = 1.332

Therefore;

[tex]\underline{\mathbf{(I_1, \, I_2)} = (1.33, \, 0.17)}[/tex]

Learn more about electric circuits here:

https://brainly.com/question/2608877

In three to five sentences, identify the acid, base, conjugate acid, and conjugate base. Use patterns in the periodic table to explain why the substances you identified acted as the acid and the base in this reaction.

Answers

A conjugate acid is formed from the base  by accepting a proton from the acid .

A conjugate base is obtained from the Brownstead - Lowry acid when it looses a proton while the conjugate acid is obtained from the Brownstead - Lowry base when it accepts a proton. In the Brownstead - Lowry sense, acid base reaction involves the loss or gain of a proton.

Consider the hypothetical reaction; AH + :B ⇄ BH + :A. The specie BH is the conjugate acid while the specie  :B is the  Brownstead - Lowry base . The specie :A is the conjugate base while the specie AH is the  Brownstead - Lowry acid.

Learn more about conjugate acid: https://brainly.com/question/10468518

The diagram below shows a child pulling a 50.-kg friend on a 20 kg sled by applying a 300. newton force on the sled rope at an angle of 40 degrees with the horizontal. The sled moves at constant velocity as the person pulls with the 300 N force.

Answers

The vertical component of the applied force on the sled is 192.84 N.

The given parameters:

Mass of the friend, M = 50 kgMass of the sled, m = 20 kgApplied force, F = 300 NInclination of the force, θ = 40 ⁰

The vertical component of the 300 N force is calculated as follows;

[tex]F_y= F \times sin(\theta)\\\\F_y = 300 \times sin(40)\\\\F_y = 192.84 \ N[/tex]

Thus, the vertical component of the applied force on the sled is 192.84 N.

Your question is not complete, the missing part of the question is below:

The vertical component of the 300 N force is approximately?

Learn more about vertical component of forces here: https://brainly.com/question/7181504

if the force acting on a body of mass 40 k.g is doubled by how much will the acceleration change​

Answers

Answer:

Explanation:

Ignoring friction, the acceleration will double

F = ma

2F = m(2a)

18. Why is the sun included in this model of the water cycle?

A. The water cycle takes place in the atmosphere and and since the sun can be
seen through the atmosphere it make the model more detailed
B. The sun is the driving force that provides the energy that keeps the water cycle
going
C. The water cycle takes place in the hydrosphere and since the sun makes it
possible for us to see everything it is included in the picture.
D. The sun is part of condensation and run-off

Answers

Answer:

b

Explanation:

1st grade common sense

4. If a charged body is negatively charged, it has excess of _______

Answers

Answer:

Electrons

Explanation:

Electrons are negatively charged sub-atomic particles, therefore when a body's negatively charged, it means that there's more electrons than protons.

Who actually asked Abraham to sacrifice his son?

Answers

Answer:

Allah asked Abraham(Ibrahim)

Please answer the question in the picture, worth 25 points

I will report any links or false answers immediately

Answers

Answer:

Option C, increases and decreases

Explanation:

When an object making noise approaches you, the wave frequency increases leading to a higher pitch. Conversely, when it moves away from you or retreats, the wave frequency decreases leading to a lower pitch. This can be observed in ambulance sirens.


Which is the answer

Answers

Answer:

no idea thanks you veryuch

Other Questions
explain why the importance of a good credit score is a myth. Nationalism encourages a sense of pride among its citizens and preserves our historyTrueFalse Assume that you are going to open a checking account. You are examining different banks and banking accounts to choose a bank account for your needs. Which of the following statements should not be one of your reasons for examining different banks? a. Being more informed leads to being better prepared to make financial decisionsb. Bank E offers you a chocolate bar for filling out an application for checking and credit at the same time.c. Banks could have charges that you do not know about until reading carefully.d. You will become more aware of how well the banks meet your particular needs. Which items are minerals or contain minerals? Check all that apply.asap please:)-lawn fertilizer-topsoil-a diamond necklace-a copper electrical wire-a cellular phone What is the color of normal nasogastric drainage in patients with nasogastric (NG) tube? Pink Green Brown Coffe-ground Change the following to improper fraction or mixed number 35/8. What is the meaning of life span or life cycle Select the correct texts in the passage. Which line of dialogue best develops the character of Demetrio in the cultural setting? adapted from The Underdogs by Mariano Azuela "Tonight or tomorrow at the latest we'll meet the Federals. What do you say, boys, shall we let them find their way about these trails?" Demetrio asked. The ragged crew jumped to their feet, uttering shrill cries of joy; then their jubilation turned angry again and they gave vent to threats, oaths and imprecations. "Of course, we can't tell how strong they are," said Demetrio as his glance traveled over their faces in scrutiny. "Do you remember Medina? Out there at Hostotipaquillo, he only had a half a dozen men. Well, he held back the soldiers, didn't he? And he defeated them, too. " "We're every bit as good as Medina's crowd!" said a tall, broad-shouldered man with a black beard and bushy eyebrows. "Viva Demetrio Macias," they all shouted. The slope of a line running through points (6, 2) and (5, 7) is: 5. -5. 1. -1. Learning Task 5: Answer the following questions in 2-3 sentences. Write them on a separate sheet of paper. 1. What are the common elements and principles found in the artworks? 2. How did they use those elements and principles in their design? 3. What made these designs different from other designs from other provinces?I NEED THE ANSWER NOWWW!!!!! What is number 10 for this? what is science explain Vous avez t tmoin une injustice. Raconter??? Question: What is the number of parking space covered by the car? What is 5+5 .................................................. Accelerated mammary gland development in intellectually disabled females. Which degree would a person most likely pursue if they are interested in howcomputers work to solve problems?A. Business managementB. Mechanical engineeringC. Computer scienceD. Education technologySUBMIT Fossil evidence indicates that the first organisms on Earth were single-called prokaryotes. The first eukaryotes are believed to have formed from these prokaryotes. How does the endosymbiotic theory explain the development of the first eukaryotic organisms?. An object is traveling at a steady speed of 9 9/10 km/h. How long will it take for the object to travel 2 1/10 km? First round to the nearest integer to find the estimated answer. Then find the exact answer. (I don't know what I'm doing.) The hardware and software that must be implemented to support the applications that the primary activities use are a part of the ________ activities.\